A formate bridged Ni(II) sheet and its 3D analogue in presence of a linear organic linker: Synthesis, crystal structure and magnetic properties

Reaction of formamide with Ni(NO3)(2)center dot 6H(2)O under hydrothermal condition in a mixture of MeOH/H2O forms a two-dimensional formate bridged sheet Ni(HCOO)(2)(MeOH)(2) (1). X-ray structure analysis reveals the conversion of formamide to formate which acts as a bridging ligand in complex 1 where the axial sites of Ni(II) are occupied by methanol used as a solvent. An analogous reaction in presence of 4,4'-bipyridyl (4,4'-bipy) yielded a three-dimensional structure Ni(HCOO)(2)(4,4'-bpy) (2). DC magnetic measurements as a function of temperature and field established the presence of spontaneous magnetization with T-c (Curie temperature) = 17 and 20.8 K in 1 and 2, respectively, which can be attributed due to spin-canting. DFT calculations were performed to corroborate the magnetic results of 1 and 2. (C) 2010 Elsevier Ltd. All rights reserved.

Magnetic, electric, and dielectric properties of FeCo alloy nanoparticles dispersed in amorphous matrix

Nanocrystalline Fe53Co47 alloy was synthesized by a single-step transmetallation chemical method at room temperature. The Fe53Co47 alloy nanoparticles of 77 and 47 wt% were dispersed in silica matrix by the sol-gel process using tetraethyl orthosilcate. Structural studies reveal that the as-prepared alloy powders are in bcc phase and silica is in an amorphous state. The phase-transition temperature and Mossbauer spectra analysis of the Fe-Co alloy establishes the homogeneous alloy formation. A saturation magnetization of 218 emu/g was obtained for pure FeCo alloy at room temperature. Scanning electron microscopic analysis demonstrates the hollow-sphere morphology for FeCo alloy particles. Magnetic nanocomposite consisting of 47 wt% FeCo-silica shows enhanced thermal stability over the native FeCo alloy. Electrical and dielectric properties of 47 wt% FeCo-silica nanocomposites were investigated as a function of frequency and temperature. It was found that the dielectric constants and dielectric loss were stable throughout the measured temperature (310-373 K). Our results indicate that FeCo-silica nanocomposite is a promising candidate for high-frequency applications. (C) 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Orientation dependence of the indentation impression morphology in a Mg alloy

The formation of anomalous indentations, with two opposite faces describing a pin-cushion effect and the other two faces normal, in long elongated grains of an extruded Mg-2Al-1Zn alloy is reported. Subsurface microstructural observations combined with Schmid factor calculations suggest that extension twinning accompanied by basal slip are the reasons for these. Johnson's expanding cavity model is invoked for further substantiation. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy

Addition of boron in small quantities to various titanium alloys have shown significant improvement in mechanical behavior of materials. In the present study, electron back-scatter diffraction (EBSD) techniques have been applied to investigate the deformation microstructure evolution in boron modified two-phase titanium alloy Ti-6Al-4V. The alloy was hot compressed at 750 degrees C up to 50% height reduction at two different strain rates (10(-3) s(-1) and 1 s(-1)). The EBSD analyses indicated significant differences in deformed microstructure of the base alloy and the alloy containing boron. A strong subgrain formation tendency was observed along with inhomogeneous distribution of dislocations inside large a colonies of Ti64. In contrast, a colonies were relatively strain free for Ti64 + B, with more uniform dislocation density distribution. The observed difference is attributed to microstructural modifications viz, grain size refinement and presence of TiB particles at grain boundary produced due to boron addition. (C) 2010 Elsevier B.V. All rights reserved.

Alloy design for fracture resistance

Several methods for improving the strength of metallic materials are available and correlations between strength and various microstructural features have been established. The purpose of this paper is to review parallel developments favouring improved fracture resistance. Resistance to fracture in monotonie loading, cyclic loading and when fracture is environment-aided have been considered in steels, aluminium alloys and anisotropic materials. Finally, the question of optimising alloy behaviour is discussed.

Tiedostumaton nykytaiteessa : Katse, ääni ja aika vuosituhannen taitteen suomalaisessa nykytaiteessa

Leevi Haapala explores moving image works, sculptures and installations from a psychoanalytic perspective in his study The Unconscious in Contemporary Art. The Gaze, Voice and Time in Finnish Contemporary Art at the Turn of the Millennium . The artists included in the study are Eija-Liisa Ahtila, Hans-Christian Berg, Markus Copper, Liisa Lounila and Salla Tykkä. The theoretical framework includes different psychoanalytic readings of the concepts of the gaze, voice and temporality. The installations are based on spatiality and temporality, and their detailed reading emphasizes the medium-specific features of the works as well as their fragmentary nature, heterogeneity and affectivity. The study is cross-disciplinary in that it connects perspectives from the visual culture, new art history and theory to the interpretation of contemporary art. The most important concepts from psychoanalysis, affect theory and trauma discourse used in the study include affect, object a (objet petit a) as articulated by Jacques Lacan, Sigmund Freud s uncanny (das Unheimliche) and trauma. Das Unheimliche has been translated as uncanny in art history under the influence of Rosalind Krauss. The object of the study, the unconscious in contemporary art, is approached through these concepts. The study focuses on Lacan s additions to the list of partial drives: the gaze and voice as scopic and invocative drives and their interpretations in the studies of the moving image. The texts by the American film theorist and art historian Kaja Silverman are in crucial role. The study locates contemporary art as part of trauma culture, which has a tendency to define individual and historical experiences through trauma. Some of the art works point towards trauma, which may appear as a theoretic or fictitious construction. The study presents a comprehensive collection of different kinds of trauma discourse in the field of art research through the texts of Hal Foster, Cathy Caruth, Ruth Leys and Shoshana Felman. The study connects trauma theory with the theoretical analysis of the interference and discontinuity of the moving image in the readings by Susan Buck-Morss, Mary Ann Doane and Peter Osborn among others. The analysis emphasizes different ways of seeing and multisensoriality in the reception of contemporary art. With their reflections and inverse projections, the surprising mechanisms of Hans-Christian Berg s sculptures are connected with Lacan s views on the early mirroring and imitation attempts of the individual s body image. Salla Tykkä s film trilogy Cave invites one to contemplate the Lacanian theory of the gaze in relation to the experiences of being seen. The three oceanic sculpture installations by Markus Copper are studied through the vocality they create, often through an aggressive way of acting, as well as from the point of view of the functioning of an invocative drive. The study compares the work of fiction and Freud s texts on paranoia and psychosis to Eija-Liisa Ahtila s manuscripts and moving image installations about the same topic. The cinematic time in Liisa Lounila s time-slice video installations is approached through the theoretical study of the unconscious temporal structure. The viewer of the moving image is inside the work in an in-between state: in a space produced by the contents of the work and its technology. The installations of the moving image enable us to inhabit different kinds of virtual bodies or spaces, which do not correspond with our everyday experiences. Nevertheless, the works of art often try to deconstruct the identification to what has been shown on screen. This way, the viewer s attention can be fixed on his own unconscious experiences in parallel with the work s deconstructed nature as representation. The study shows that contemporary art is a central cultural practice, which allows us to discuss the unconscious in a meaningful way. The study suggests that the agency that is discursively diffuse and consists of several different praxes should be called the unconscious. The emergence of the unconscious can happen in two areas: in contemporary art through different senses and discursive elements, and in the study of contemporary art, which, being a linguistic activity is sensitive to the movements of the unconscious. One of the missions of art research is to build different kinds of articulated constructs and to open an interpretative space for the nature of art as an event.

Phase relationships in the system Ni-W-O and thermodynamic properties of NiWO,

The phase diagram of the Ni-W-O system at 1200 K was established by metallographic and X-ray identification of the phases present after equilibration at controlled oxygen potentials. The oxygen partial pressures over the samples were fixed by metered streams of CO+CO2 gas mixtures. There was only one ternary oxide, nickel tungstate (NiWO4), in the Ni-W-O system at a total pressure of 1 atm, and this compound decomposed to a mixture of Ni+WO2.72 on lowering the oxygen potential. The Gibbs' free energy of formation of NiWO4 was determined from the measurement of the e.m.f. of the solid oxide galvanic cell, Pt, Ni+NiWO4+WO2.72/CaO-ZrO2/Ni+NiO, Pt and thermodynamic properties of tungsten and nickel oxides available in the literature. For the reaction, NiO(s)+WO3(s)rarrNiWO4(s) DeltaG°=–10500–0.708 T (±250) cal mol–1.

A Photoelectron Spectroscopic Study Of The Interaction Of Oxygen, Nitrogen And Transition-Metals With C-60 Films

Evidence is presented for the strong interaction of oxygen and nitrogen with solid films of buckminsterfullerene based on core-level spectroscopic studies. Cr, Ni and Cu deposited on C60 films interact strongly giving rise to large changes in the C(Is) and C(2p) binding energies as well as the (2p) binding energies of the transition metals.

Electron energy loss spectroscopic study of Cr(CO)6, Mo(CO)6 and W(CO)6 in the vapour phase

Electron energy loss spectra (EELS) of Cr, Mo and W hexacarbonyls in the vapour phase are reported. Most of the bands observed are similar to those in optical spectra, but the two high energy transitions in the 9·8–11·2 eV region are reported here for the first time. Based on the orbital energies from the ultraviolet photoelectron spectra and the electronic transition energies from EELS and earlier optical studies, the molecular energy level schemes of these molecules are constructed.

Continuous ordering below the tricritical point: A critical test for the kinetic pathway in Fe-12at.% Si alloy

A critical test has been presented to establish the nature of the kinetic pathways for the decomposition of Fe-12 at.% Si alloy below the metastable tricritical point. The results, based on the measurements of saturation magnetization, establish that a congruent ordering from B2 --> D0(3) precedes the development of a B2 + D0(3) two-phase field, consistent with the predictions in 1976 of Allen and Cahn.

Effect Of Electroslag Refining On Microstructure And Mechanical-Properties Of Is-7670 Alloy

The electroslag refining technique is one of the modern tools which is capable of imparting superior mechanical and chemical properties to metals and alloys. Refining usually results in the elimination of a number of casting or solidification defects, such as shrinkage porosity, gas porosity, pipe, micro- and macro segregation. Remelting also imparts a directional grain structure apart from refining the size of the inclusions, grains and precipitates. This technique has over the years been used widely and successfully to improve the mechanical and chemical properties of steels and alloy steels which are used in the nuclear, missile, aerospace and marine industries for certain critical applications. But the application of ESR to aluminium and its alloys is only recent. This paper investigates the response of an aluminium alloy (corresponding to the Indian Specification IS: 7670) to ESR. Based on theoretical considerations and microstructural evidence it elucidates how ESR of aluminium alloys differs from that of ferrous alloys. The improvement achieved in mechanical properties of the alloy is correlated with the microstructure.

Deformation processing map for control of microstructure in Al---4Mg alloy

The compression test flow stress data of Al-4Mg alloy at different temperatures and strain rates are analysed using a dynamic materials model which considers the workpiece material as a dissipator of power causing microstructural changes. A processing map representing the efficiency of power dissipation as a function of temperature and strain rate has been established and optimum processing conditions for the alloy are determined. The features of the map correlate well with the microstructure and mechanical properties.