Lock Acquisition and Sensitivity Analysis of Advanced LIGO Interferometers

Laser interferometer gravitational wave observatory (LIGO) consists of two complex large-scale laser interferometers designed for direct detection of gravitational waves from distant astrophysical sources in the frequency range 10Hz - 5kHz. Direct detection of space-time ripples will support Einstein's general theory of relativity and provide invaluable information and new insight into physics of the Universe.

Initial phase of LIGO started in 2002, and since then data was collected during six science runs. Instrument sensitivity was improving from run to run due to the effort of commissioning team. Initial LIGO has reached designed sensitivity during the last science run, which ended in October 2010.

In parallel with commissioning and data analysis with the initial detector, LIGO group worked on research and development of the next generation detectors. Major instrument upgrade from initial to advanced LIGO started in 2010 and lasted till 2014.

This thesis describes results of commissioning work done at LIGO Livingston site from 2013 until 2015 in parallel with and after the installation of the instrument. This thesis also discusses new techniques and tools developed at the 40m prototype including adaptive filtering, estimation of quantization noise in digital filters and design of isolation kits for ground seismometers.

The first part of this thesis is devoted to the description of methods for bringing interferometer to the linear regime when collection of data becomes possible. States of longitudinal and angular controls of interferometer degrees of freedom during lock acquisition process and in low noise configuration are discussed in details.

Once interferometer is locked and transitioned to low noise regime, instrument produces astrophysics data that should be calibrated to units of meters or strain. The second part of this thesis describes online calibration technique set up in both observatories to monitor the quality of the collected data in real time. Sensitivity analysis was done to understand and eliminate noise sources of the instrument.

Coupling of noise sources to gravitational wave channel can be reduced if robust feedforward and optimal feedback control loops are implemented. The last part of this thesis describes static and adaptive feedforward noise cancellation techniques applied to Advanced LIGO interferometers and tested at the 40m prototype. Applications of optimal time domain feedback control techniques and estimators to aLIGO control loops are also discussed.

Commissioning work is still ongoing at the sites. First science run of advanced LIGO is planned for September 2015 and will last for 3-4 months. This run will be followed by a set of small instrument upgrades that will be installed on a time scale of few months. Second science run will start in spring 2016 and last for about 6 months. Since current sensitivity of advanced LIGO is already more than factor of 3 higher compared to initial detectors and keeps improving on a monthly basis, upcoming science runs have a good chance for the first direct detection of gravitational waves.

A hybrid-parallel framework for the nonlinear seismic analysis of very tall buildings

FRAME3D, a program for the nonlinear seismic analysis of steel structures, has previously been used to study the collapse mechanisms of steel buildings up to 20 stories tall. The present thesis is inspired by the need to conduct similar analysis for much taller structures. It improves FRAME3D in two primary ways.

First, FRAME3D is revised to address specific nonlinear situations involving large displacement/rotation increments, the backup-subdivide algorithm, element failure, and extremely narrow joint hysteresis. The revisions result in superior convergence capabilities when modeling earthquake-induced collapse. The material model of a steel fiber is also modified to allow for post-rupture compressive strength.

Second, a parallel FRAME3D (PFRAME3D) is developed. The serial code is optimized and then parallelized. A distributed-memory divide-and-conquer approach is used for both the global direct solver and element-state updates. The result is an implicit finite-element hybrid-parallel program that takes advantage of the narrow-band nature of very tall buildings and uses nearest-neighbor-only communication patterns.

Using three structures of varied sized, PFRAME3D is shown to compute reproducible results that agree with that of the optimized 1-core version (displacement time-history response root-mean-squared errors are ~〖10〗^(-5) m) with much less wall time (e.g., a dynamic time-history collapse simulation of a 60-story building is computed in 5.69 hrs with 128 cores—a speedup of 14.7 vs. the optimized 1-core version). The maximum speedups attained are shown to increase with building height (as the total number of cores used also increases), and the parallel framework can be expected to be suitable for buildings taller than the ones presented here.

PFRAME3D is used to analyze a hypothetical 60-story steel moment-frame tube building (fundamental period of 6.16 sec) designed according to the 1994 Uniform Building Code. Dynamic pushover and time-history analyses are conducted. Multi-story shear-band collapse mechanisms are observed around mid-height of the building. The use of closely-spaced columns and deep beams is found to contribute to the building's “somewhat brittle” behavior (ductility ratio ~2.0). Overall building strength is observed to be sensitive to whether a model is fracture-capable.

Analysis of beam-quality degradation in nonlinear frequency conversion

Based on the ripple transfers of electric-field amplitude and phase in frequency tripling, simple formulas are derived for the harmonic laser's beam-quality factor M-3omega(2), with an arbitrary fundamental incidence to ideal nonlinear crystals. Whereas the harmonic beam's quality is generally degraded, the beam's divergence is similar to that of the fundamental after nonlinear frequency conversion. For practical crystals with periodic surface ripples that are caused by their machining, a multiorder diffractive model is presented with which the focusing properties of harmonic beams can be studied. Predictions of the theories are shown to be in excellent agreement with full numerical simulations. (C) 2002 Optical Society of America.

Osteometric analysis of the scapula and humerus of Rangifer tarandus and Cervus elaphus : A contribution to the discrimination of Late Pleistocene cervids

Fossil remains of reindeer (Rangifer tarandus) occurring outside their present range are an important indicator of formerly cold climatic conditions, but are easily confused with those of the red deer (Cervus elaphus). The locality of Kiputz IX has yielded one of the best-preserved Late Pleistocene reindeer populations of the southern Pyrenees, occurring in association with Bison priscus and the much more abundant Cervus elaphus. Fossil remains from this site are mostly complete and not affected by human intervention, thus creating the perfect conditions for reliable osteometric analyses. Here, we quantify diagnostic morphological features of the scapula and the humerus of Cervus elaphus and Rangifer tarandus to establish the potential of these bones to aid in interspecific discrimination. In the case of the scapula, the best species discriminator is the ratio of the minimum anteroposterior diameter of the scapular neck and the development of the articular process, while the breadth of the trochlea is the best discriminator in the case of the humerus.

Physiological modules for generating discrete and rhythmic movements: Component analysis of EMG signals

A central question in Neuroscience is that of how the nervous system generates the spatiotemporal commands needed to realize complex gestures, such as handwriting. A key postulate is that the central nervous system (CNS) builds up complex movements from a set of simpler motor primitives or control modules. In this study we examined the control modules underlying the generation of muscle activations when performing different types of movement: discrete, point-to-point movements in eight different directions and continuous figure-eight movements in both the normal, upright orientation and rotated 90 degrees. To test for the effects of biomechanical constraints, movements were performed in the frontal-parallel or sagittal planes, corresponding to two different nominal flexion/abduction postures of the shoulder. In all cases we measured limb kinematics and surface electromyographic activity (EMB) signals for seven different muscles acting around the shoulder. We first performed principal component analysis (PCA) of the EMG signals on a movement-by-movement basis. We found a surprisingly consistent pattern of muscle groupings across movement types and movement planes, although we could detect systematic differences between the PCs derived from movements performed in each sholder posture and between the principal components associated with the different orientations of the figure. Unexpectedly we found no systematic differences between the figute eights and the point-to-point movements. The first three principal components could be associated with a general co-contraction of all seven muscles plus two patterns of reciprocal activatoin. From these results, we surmise that both "discrete-rhythmic movements" such as the figure eight, and discrete point-to-point movement may be constructed from three different fundamental modules, one regulating the impedance of the limb over the time span of the movement and two others operating to generate movement, one aligned with the vertical and the other aligned with the horizontal.

Analysis of sex-specific spawning biomass per recruit of the sailfish (Istiophorus platypterus) in the waters off eastern Taiwan

Analyses of sex-specific yield per recruit and spawning stock biomass per recruit were conducted to evaluate the current status of the sailfish (Istiophorus platypterus) fishery in the waters off eastern Taiwan. Natural mortality rates estimated from Pauly’s empirical equation were 0.26/yr for females and 0.27/yr for males. The current fishing mortality rates were estimated as 0.24/yr and 0.43/yr for females and males, respectively, which are much lower than the estimated F0 .1 (0.62/yr and 0.79/yr for females and males, respectively) and FSSB40 (0.46/yr for females) which are commonly used as target reference points in fisheries management. The effects of the fishing mortality, natural mortality, and age at first capture on the estimates of biological reference points were evaluated by using the Monte Carlo simulation. The results indicate that failure to consider the uncertainty in parameters such as natural mortality or age at first capture may lead to the improper estimation of biological reference points. This study indicates the possibility of current fishing mortality exceeding the target biological reference points may be negligible for sailfish in the waters off eastern Taiwan. However, in view of the recent rapid increase in fishing effort, it is evident that the stock status and development of the fishery need to be closely monitore

Energy retrofits in social housing. Analysis of its thermal behaviour.

468 p.

Proteomic Analysis of the Ubiquitin Landscape in the Drosophila Embryonic Nervous System and the Adult Photoreceptor Cells

Background Ubiquitination is known to regulate physiological neuronal functions as well as to be involved in a number of neuronal diseases. Several ubiquitin proteomic approaches have been developed during the last decade but, as they have been mostly applied to non-neuronal cell culture, very little is yet known about neuronal ubiquitination pathways in vivo. Methodology/Principal Findings Using an in vivo biotinylation strategy we have isolated and identified the ubiquitinated proteome in neurons both for the developing embryonic brain and for the adult eye of Drosophila melanogaster. Bioinformatic comparison of both datasets indicates a significant difference on the ubiquitin substrates, which logically correlates with the processes that are most active at each of the developmental stages. Detection within the isolated material of two ubiquitin E3 ligases, Parkin and Ube3a, indicates their ubiquitinating activity on the studied tissues. Further identification of the proteins that do accumulate upon interference with the proteasomal degradative pathway provides an indication of the proteins that are targeted for clearance in neurons. Last, we report the proof-of-principle validation of two lysine residues required for nSyb ubiquitination. Conclusions/Significance These data cast light on the differential and common ubiquitination pathways between the embryonic and adult neurons, and hence will contribute to the understanding of the mechanisms by which neuronal function is regulated. The in vivo biotinylation methodology described here complements other approaches for ubiquitome study and offers unique advantages, and is poised to provide further insight into disease mechanisms related to the ubiquitin proteasome system.

Analysis of the retailer value chain segment in five governorates

This study is the third output of the SDC-funded “Improving Employment and Income through Development of Egyptian Aquaculture” (IEIDEAS), a three-year project being jointly implemented by the WorldFish Center and CARE International in Egypt with support from the Ministry of Agriculture and Land Reclamation. The aim of the study is to gather data on the retailer segment of the aquaculture value chain in Egypt, namely on the employment and market conditions of the women fish retailers in the five target governorates. In addition, this study provides a case study in Minya and Fayoum of the current income levels and standards of living of this target group. Finally, the study aims to identify the major problems and obstacles facing these women retailers and suggest some relevant interventions.

Genetic analysis of juvenile coho salmon (Oncorhynchus kisutch) off Oregon and Washington reveals few Columbia River wild fish

Little is known about the ocean distributions of wild juvenile coho salmon off the Oregon-Washington coast. In this study we report tag recoveries and genetic mixed-stock estimates of juvenile fish caught in coastal waters near the Columbia River plume. To support the genetic estimates, we report an allozyme-frequency baseline for 89 wild and hatchery-reared coho salmon spawning populations, extending from northern California to southern British Columbia. The products of 59 allozyme-encoding loci were examined with starch-gel electrophoresis. Of these, 56 loci were polymorphic, and 29 loci had P0.95 levels of polymorphism. Average heterozygosities within populations ranged from 0.021 to 0.046 and averaged 0.033. Multidimensional scaling of chord genetic distances between samples resolved nine regional groups that were sufficiently distinct for genetic mixed-stock analysis. About 2.9% of the total gene diversity was due to differences among populations within these regions, and 2.6% was due to differences among the nine regions. This allele-frequency data base was used to estimate the stock proportions of 730 juvenile coho salmon in offshore samples collected from central Oregon to northern Washington in June and September-October 1998−2000. Genetic mixed-stock analysis, together with recoveries of tagged or fin-clipped fish, indicates that about one half of the juveniles came from Columbia River hatcheries. Only 22% of the ocean-caught juveniles were wild fish, originating largely from coastal Oregon and Washington rivers (about 20%). Unlike previous studies of tagged juveniles, both tag recoveries and genetic estimates indicate the presence of fish from British Columbia and Puget Sound in southern waters. The most salient feature of genetic mixed stock estimates was the paucity of wild juveniles from natural populations in the Columbia River Basin. This result reflects the large decrease in the abundances of these populations in the last few decades.

Value chain analysis of the Egyptian aquaculture feed industry

The commercial aquaculture feed industry in Egypt is growing at a rapid rate. As a result, the number of fish feed mills has increased from just 5 mills producing about 20,000 t per year in 1999, to over 60 mills with a current production estimate of 800,000–1,000,000 t/year. The performance of the aquafeed industry in Egypt is not well understood, as the value chain structure has not yet been mapped. This study aims to assess the status of the fish feed sector in Egypt, with an emphasis on: mapping and understanding fish feed value chains, describing the main actors and stakeholders within the chain, assessing value chain performance, identifying major strengths and weakness of the sector, and suggesting appropriate actions, management and development strategies.

Techno-economic analysis of production and marketing of marine by-products in India

Marine by-products coming under the ancillary products group found many applications in pharmaceutical and industrial sectors. Although many of these products are fetching very high price at the export market, adequate statistics regarding their current production, marketing and utilisation is lacking. The present analysis deals with the production potential, level of exploitation, uses, export growth rate and potential for the future of some of these marine by-products. The analysis revealed that an estimated quantity of 205 t. of shells, 10 t. of gastropod operculum, 4,932 t. of shark liver oil and 4,384 t. of shark cartilage could be produced annually in India with the current landings. The production potential of chitin is estimated as 3,560 t. from shrimp shell wastes and 1,354 t. from crab shell wastes. The high unit value of different products clearly indicates the scope for their development by evolving appropriate utilisation and marketing strategies.

Automated meshing for aero-thermal analysis of complex automotive geometries

Successful product development, especially in motorsport, increasingly depends not just on the ability to simulate aero-thermal behavior of complex geometrical configurations, but also the ability to automate these simulations within a workflow and perform as many simulations as possible within constrained time frames. The core of these aero-thermal simulations - and usually the main bottleneck - is generating the computational mesh. This paper describes recent work aimed at developing a mesh generator which can reliably produce meshes for geometries of essentially arbitrary complexity in an automated manner and fast enough to keep up with the pace of an engineering development program. Our goal is to be able to script the mesh generation within an automated workflow - and forget it. © 2011 SAE International.

Economic analysis of carp based culture technologies in selected areas of Bangladesh

Six carp based culture technologies such as, carp-pangas, carp polyculture, carp-golda, pangas monoculture, golda monoculture and nursery have been selected to determine the cost and returns of respective technologies in Bangladesh. The sample farmers selected for these technologies were 55, 100, 65, 50, 51 and 55 respectively and thus the total sample size stood at 376. The study covered 7 districts of Bangladesh, namely, Mymensingh, Bogra, Noakhali, Comilla, Jessore, Khulna and Bagerhat. Both primary and secondary data were used for this study. It was found that farmers used a good number of feeds for the selected technologies and they maintained no standard doses for them. Remarkable differences were found among the prices of different feeds and other inputs used for different technologies in different locations. Prices of all inputs were found to be increasing and this increase was more in recent years compared to previous years. Though all the technologies were found to be profitable, the feed situation was not satisfactory. Except rice polish all the local feeds showed deficit in supply to meet the national demand for the country. If this situation persists and no proper measures are taken to secure the local feed supply, the present development of supplementary feed-based aquaculture would be fully dependent on imported feeds and would not be sustainable in future. This study strongly suggests the corresponding authority to handle the matter with proper attention considering its significant livelihood impact on the economy of the country.

GENETIC DIVERSITY IN THE CHINESE PANGOLIN (MANIS-PENTADACTYLA) - INFERRED FROM RESTRICTION ENZYME ANALYSIS OF MITOCHONDRIAL DNAS

Two different forms of Chinese pangolins can be recognized according to the color of their scales, i.e., brown and dusky. We analyzed mitochondrial DNA (mtDNA) purified from the livers of seven dusky and six brown Chinese pangolins from the same locality, using cleavage patterns from 19 restriction enzymes. From the 19 6-bp recognition enzymes used, 51-56 sites were observed. By combining the cleavage patterns for each enzyme, the 13 samples were classified into four restriction types: two in dusky and two in brown Chinese pangolins. The estimated number of nucleotide substitutions per site in dusky and brown types is 0.002, and that between dusky and brown types is 0.012. Divergence between brown and dusky forms began 0.6 Myr ago, provided the mean rate of sequence divergence is 0.02 per Myr in mtDNA. Our results suggest that there is considerable divergence in Chinese pangolins, and brown and dusky Chinese pangolins may be quite different forms or, at least, belong to different maternal groups.