Vibration analysis of a printed circuit board

The reliability of the printed circuit board assembly under dynamic environments, such as those found onboard airplanes, ships and land vehicles is receiving more attention. This research analyses the dynamic characteristics of the printed circuit board (PCB) supported by edge retainers and plug-in connectors. By modelling the wedge retainer and connector as providing simply supported boundary condition with appropriate rotational spring stiffnesses along their respective edges with the aid of finite element codes, accurate natural frequencies for the board against experimental natural frequencies are obtained. For a PCB supported by two opposite wedge retainers and a plug-in connector and with its remaining edge free of any restraint, it is found that these real supports behave somewhere between the simply supported and clamped boundary conditions and provide a percentage fixity of 39.5% more than the classical simply supported case. By using an eigensensitivity method, the rotational stiffnesses representing the boundary supports of the PCB can be updated effectively and is capable of representing the dynamics of the PCB accurately. The result shows that the percentage error in the fundamental frequency of the PCB finite element model is substantially reduced from 22.3% to 1.3%. The procedure demonstrated the effectiveness of using only the vibration test frequencies as reference data when the mode shapes of the original untuned model are almost identical to the referenced modes/experimental data. When using only modal frequencies in model improvement, the analysis is very much simplified. Furthermore, the time taken to obtain the experimental data will be substantially reduced as the experimental mode shapes are not required.In addition, this thesis advocates a relatively simple method in determining the support locations for maximising the fundamental frequency of vibrating structures. The technique is simple and does not require any optimisation or sequential search algorithm in the analysis. The key to the procedure is to position the necessary supports at positions so as to eliminate the lower modes from the original configuration. This is accomplished by introducing point supports along the nodal lines of the highest possible mode from the original configuration, so that all the other lower modes are eliminated by the introduction of the new or extra supports to the structure. It also proposes inspecting the average driving point residues along the nodal lines of vibrating plates to find the optimal locations of the supports. Numerical examples are provided to demonstrate its validity. By applying to the PCB supported on its three sides by two wedge retainers and a connector, it is found that a single point constraint that would yield maximum fundamental frequency is located at the mid-point of the nodal line, namely, node 39. This point support has the effect of increasing the structure's fundamental frequency from 68.4 Hz to 146.9 Hz, or 115% higher.

Nonlinear speech analysis algorithms mapped to a standard metric achieve clinically useful quantification of average Parkinson's disease symptom severity

The standard reference clinical score quantifying average Parkinson's disease (PD) symptom severity is the Unified Parkinson's Disease Rating Scale (UPDRS). At present, UPDRS is determined by the subjective clinical evaluation of the patient's ability to adequately cope with a range of tasks. In this study, we extend recent findings that UPDRS can be objectively assessed to clinically useful accuracy using simple, self-administered speech tests, without requiring the patient's physical presence in the clinic. We apply a wide range of known speech signal processing algorithms to a large database (approx. 6000 recordings from 42 PD patients, recruited to a six-month, multi-centre trial) and propose a number of novel, nonlinear signal processing algorithms which reveal pathological characteristics in PD more accurately than existing approaches. Robust feature selection algorithms select the optimal subset of these algorithms, which is fed into non-parametric regression and classification algorithms, mapping the signal processing algorithm outputs to UPDRS. We demonstrate rapid, accurate replication of the UPDRS assessment with clinically useful accuracy (about 2 UPDRS points difference from the clinicians' estimates, p < 0.001). This study supports the viability of frequent, remote, cost-effective, objective, accurate UPDRS telemonitoring based on self-administered speech tests. This technology could facilitate large-scale clinical trials into novel PD treatments.

Project risk management using multiple criteria decision-making technique and decision tree analysis:a case study of Indian oil refinery

This study proposes an integrated analytical framework for effective management of project risks using combined multiple criteria decision-making technique and decision tree analysis. First, a conceptual risk management model was developed through thorough literature review. The model was then applied through action research on a petroleum oil refinery construction project in the Central part of India in order to demonstrate its effectiveness. Oil refinery construction projects are risky because of technical complexity, resource unavailability, involvement of many stakeholders and strict environmental requirements. Although project risk management has been researched extensively, practical and easily adoptable framework is missing. In the proposed framework, risks are identified using cause and effect diagram, analysed using the analytic hierarchy process and responses are developed using the risk map. Additionally, decision tree analysis allows modelling various options for risk response development and optimises selection of risk mitigating strategy. The proposed risk management framework could be easily adopted and applied in any project and integrated with other project management knowledge areas.

Efficiency analysis of Islamic banks:a case of Gulf Cooperation Council (GCC)

Although considerable effort has been invested in the measurement of banking efficiency using Data Envelopment Analysis, hardly any empirical research has focused on comparison of banks in Gulf States Countries This paper employs data on Gulf States banking sector for the period 2000-2002 to develop efficiency scores and rankings for both Islamic and conventional banks. We then investigate the productivity change using Malmquist Index and decompose the productivity into technical change and efficiency change. Further, hypothesis testing and statistical precision in the context of nonparametric efficiency and productivity measurement have been used. Specially, cross-country analysis of efficiency and comparisons of efficiencies between Islamic banks and conventional banks have been investigated using Mann-Whitney test.

Planning for project control through risk analysis:a case of petroleum pipeline laying

Projects that are exposed to uncertain environments can be effectively controlled with the application of risk analysis during the planning stage. The Analytic Hierarchy Process, a multiattribute decision-making technique, can be used to analyse and assess project risks which are objective or subjective in nature. Among other advantages, the process logically integrates the various elements in the planning process. The results from risk analysis and activity analysis are then used to develop a logical contingency allowance for the project through the application of probability theory. The contingency allowance is created in two parts: (a) a technical contingency, and (b) a management contingency. This provides a basis for decision making in a changing project environment. Effective control of the project is made possible by the limitation of the changes within the monetary contingency allowance for the work package concerned, and the utilization of the contingency through proper appropriation. The whole methodology is applied to a pipeline-laying project in India, and its effectiveness in project control is demonstrated.

Classifying flexible measures in data envelopment analysis:a slack-based measure

Data envelopment analysis (DEA) has gained a wide range of applications in measuring comparative efficiency of decision making units (DMUs) with multiple incommensurate inputs and outputs. The standard DEA method requires that the status of all input and output variables be known exactly. However, in many real applications, the status of some measures is not clearly known as inputs or outputs. These measures are referred to as flexible measures. This paper proposes a flexible slacks-based measure (FSBM) of efficiency in which each flexible measure can play input role for some DMUs and output role for others to maximize the relative efficiency of the DMU under evaluation. Further, we will show that when an operational unit is efficient in a specific flexible measure, this measure can play both input and output roles for this unit. In this case, the optimal input/output designation for flexible measure is one that optimizes the efficiency of the artificial average unit. An application in assessing UK higher education institutions used to show the applicability of the proposed approach. © 2013 Elsevier Ltd. All rights reserved.

A case study analysis on information and communication technology usage in small logistics service companies

The impact of ICT (information and communications technology) on the logistics service industry is reshaping its organisation and structure. Within this process, the nature of changes resulting from ICT dissemination in small 3PLs (third party logistics providers) is still unclear, although a large number of logistics service markets, especially in the EU context, are populated by a high number of small 3PLs. In addition, there is still a gap in the literature where the role of technological capability in small 3PLs is seriously underestimated. This gives rise to the need to develop investigation in this area. The paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

Technology influences on small logistics providers:a case study analysis

ICT has triggered many changes in the logistics service industry. New technology is reshaping the organisation and structure of this industry as ICT impacts significantly on the operations of 3PLs. Within this process, while large 3PLs are gaining substantial benefits from technology usage, the nature of changes resulting from ICT usage in small 3PLs remains unclear. This is critical particularly for those markets populated by a high number of small 3PLs such as the Italian logistics industry. From the research point of view, there is still a gap in the literature where the role of technological capability in small 3PLs are seriously underestimated. This gives rise to the need to develop investigation in this area. This paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

Medical students' personal experience of high-stakes failure:case studies using interpretative phenomenological analysis

Abstract (provisional): Background Failing a high-stakes assessment at medical school is a major event for those who go through the experience. Students who fail at medical school may be more likely to struggle in professional practice, therefore helping individuals overcome problems and respond appropriately is important. There is little understanding about what factors influence how individuals experience failure or make sense of the failing experience in remediation. The aim of this study was to investigate the complexity surrounding the failure experience from the student’s perspective using interpretative phenomenological analysis (IPA). Methods The accounts of 3 medical students who had failed final re-sit exams, were subjected to in-depth analysis using IPA methodology. IPA was used to analyse each transcript case-by-case allowing the researcher to make sense of the participant’s subjective world. The analysis process allowed the complexity surrounding the failure to be highlighted, alongside a narrative describing how students made sense of the experience. Results The circumstances surrounding students as they approached assessment and experienced failure at finals were a complex interaction between academic problems, personal problems (specifically finance and relationships), strained relationships with friends, family or faculty, and various mental health problems. Each student experienced multi-dimensional issues, each with their own individual combination of problems, but experienced remediation as a one-dimensional intervention with focus only on improving performance in written exams. What these students needed to be included was help with clinical skills, plus social and emotional support. Fear of termination of the their course was a barrier to open communication with staff. Conclusions These students’ experience of failure was complex. The experience of remediation is influenced by the way in which students make sense of failing. Generic remediation programmes may fail to meet the needs of students for whom personal, social and mental health issues are a part of the picture.

Enhancing the transparency of accounting research: the case of narrative analysis

Purpose – This paper aims to clarify what ‘narrative analysis’ may entail when it is assumed that interview accounts can be treated as (collections of) narratives. What is considered a narrative and how these may be analyzed is open to debate. After suggesting an approach of how to deal with narrative analysis, the authors critically discuss how far it might offer insights into a particular accounting case. Design/methodology/approach – After having explained what the authors’ view on narrative analysis is, and how this is linked with the extant literature, the authors examine the socialisation processes of two early career accountants that have been articulated in an interview context. Findings – The approach to narrative analysis set out in this paper could help to clarify how and why certain interpretations from an interview are generated by a researcher. The authors emphasise the importance of discussing a researcher’s process of discovery when an interpretive approach to research is adopted. Research limitations/implications – The application of any method, and what a researcher thinks can be distilled from this, depends on the research outlook he/she has. As the authors adopt an interpretive approach to research in this paper, they acknowledge that the interpretations of narratives, and what they deem to be narratives, will be infused by their own perceptions. Practical implications – The authors believe that the writing-up of qualitative research from an interpretive stance would benefit from an explicit acceptance of the equivocal nature of interpretation. The way in which they present and discuss the narrative analyses in this paper intends to bring this to the fore. Originality/value – Whenever someone says he/she engages in narrative analysis, both the “narrative” and “analysis” part of “narrative analysis” need to be explicated. The authors believe that this only happens every so often. This paper puts forward an approach of how more clarity on this might be achieved by combining two frameworks in the extant literature, so that the transparency of the research is enhanced.