Single institution outcomes of treatment of severe aplastic anaemia

Background: In severe aplastic anaemia, the treatment of choice for young patients with a human leucocyte antigen-matched sibling is now established as allogeneic bone marrow transplantation (BMT). In older patients and in those without a matched sibling donor, immunosuppressive therapy is the usual first option. 'Alternative' marrow donors are emerging as an option for those without a matched sibling donor. Aims: To review 10 years of local experience in treating severe aplastic anaemia with BMT and immunosuppressive therapy with emphasis on long-term outcomes. Methods: A retrospective analysis was performed of all patients with severe aplastic anaemia presenting to the Royal Brisbane and Royal Children's Hos- pitals between 1989 and 1999. Data were abstracted regarding patient demographics, pretreatment characteristics and outcome measures, including response rates, overall survival and long-term complications. Results: Twenty-seven consecutive patients were identified, 12 treated with immunosuppression alone and 15 with BMT. In these two groups, transfusion independence was attained in 25% and 100%, respectively, with overall survival being 36% and 100%, respectively. Those treated with immunosuppression were significantly older (median 41.5 versus 22 years, P = 0.008). Long-term survivors of either treatment had extremely low morbidity. Three patients carried pregnancies to term post-transplant. Three patients received alternative donor BMT with correspondingly excellent survival. Conclusions: Patients treated with allogeneic BMT for severe aplastic anaemia enjoyed extremely good long-term survival and minimal morbidity. Patients treated with immunosuppressive therapy had a poorer outcome reflecting their older age and different usage of therapies over the past decade. Optimal treatment strategies for severe aplastic anaemia remain to be determined.

Violation of multiparticle Bell inequalities for low- and high-flux parametric amplification using both vacuum and entangled input states

We show how polarization measurements on the output fields generated by parametric down conversion will reveal a violation of multiparticle Bell inequalities, in the regime of both low- and high-output intensity. In this case, each spatially separated system, upon which a measurement is performed, is comprised of more than one particle. In view of the formal analogy with spin systems, the proposal provides an opportunity to test the predictions of quantum mechanics for spatially separated higher spin states. Here the quantum behavior possible even where measurements are performed on systems of large quantum (particle) number may be demonstrated. Our proposal applies to both vacuum-state signal and idler inputs, and also to the quantum-injected parametric amplifier as studied by De Martini The effect of detector inefficiencies is included, and weaker Bell-Clauser-Horne inequalities are derived to enable realistic tests of local hidden variables with auxiliary assumptions for the multiparticle situation.

Site-Directed Mutagenesis of Dimethyl Sulfoxide Reductase from Rhodobacter capsulatus: Characterization of a Y114 → F Mutant

A system for expressing site-directed mutants of the molybdenum enzyme dimethyl sulfoxide reductase from Rhodobacter capsulatus in the natural host was constructed. This system was used to Generate and express dimethyl sulfoxide reductase with a Y114F mutation. The Y114F mutant had an increased k(cat) and increased K-m toward both dimethyl sulfoxide and trimethylamine N-oxide compared to the native enzyme, and the value of k(cat)/K-m was lower for both substrates in the mutant enzyme. The Y114F mutant, as isolated, was able to oxidize dimethyl sulfide with phenazine ethosulfate as the electron acceptor but with a lower k(cat) than that of the native enzyme. The pH optimum of dimethyl sulfide: acceptor oxidoreductase activity in the Y114F mutant was shown to be shifted by +1 pH unit compared to the native enzyme. The Y114F mutant did not form a pink complex with dimethyl sulfide, which is characteristic of the native enzyme. The mutant enzyme showed a large increase in the K-d for DMS. Direct electrochemistry showed that the Mo(V)/Mo(IV) couple was unaffected by the Y114F mutant, but the midpoint potential of the Mo(VI)/Mo(V) couple was raised by about 50 mV. These data confirm that the Y114 residue plays a critical role in oxidation-reduction processes at the molybdenum active site and in oxygen atom transfer associated with sulfoxide reduction.

Application of spatial analysis techniques to adjust for fertility trends and identify interplot competition in early stage sugarcane selection trials

Most sugarcane breeding programs in Australia use large unreplicated trials to evaluate clones in the early stages of selection. Commercial varieties that are replicated provide a method of local control of soil fertility. Although such methods may be useful in detecting broad trends in the field, variation often occurs on a much smaller scale. Methods such as spatial analysis adjust a plot for variability by using information from immediate neighbours. These techniques are routinely used to analyse cereal data in Australia and have resulted in increased accuracy and precision in the estimates of variety effects. In this paper, spatial analyses in which the variability is decomposed into local, natural, and extraneous components are applied to early selection trials in sugarcane. Interplot competition in cane yield and trend in sugar content were substantial in many of the trials and there were often large differences in the selections between the spatial and current method used by the Bureau of Sugar Experiment Stations. A joint modelling approach for tonnes sugar per hectare in response to fertility trends and interplot competition is recommended.

Rural lines of flight: Telecommunications and post-metro dreaming

Information and communications technologies hold a prominent place in the cultural imagination of many people living outside the Australian metropolis, especially recent émigrés. A vision of a wired pastoral conjures up the possibilities of city work, connections and pleasures accompanying the flight to the country. Such aspirations have given a twist to one of the great topos of Australian post-invasion communications history, communications ameliorating the perceived isolation in the bush. This article examines important changes to rural telecommunications in the 1990s coinciding with post-metro dreaming and digital convergence, namely the rise of local telecommunications. Neo-Foucauldian accounts of citizenship hold some promise for explaining the criss-cross of tangled lines of flight in regional communications in the twenty-first century: emergent subjectivities, utopian digital modes of becoming, new politics of infrastructure, reconfigured relationships among state, market and citizen.

Adsorption in slit-like pores of activated carbons: Improvement of the Horvath and Kawazoe method

Anew thermodynamic approach has been developed in this paper to analyze adsorption in slitlike pores. The equilibrium is described by two thermodynamic conditions: the Helmholtz free energy must be minimal, and the grand potential functional at that minimum must be negative. This approach has led to local isotherms that describe adsorption in the form of a single layer or two layers near the pore walls. In narrow pores local isotherms have one step that could be either very sharp but continuous or discontinuous benchlike for a definite range of pore width. The latter reflects a so-called 0 --> 1 monolayer transition. In relatively wide pores, local isotherms have two steps, of which the first step corresponds to the appearance of two layers near the pore walls, while the second step corresponds to the filling of the space between these layers. All features of local isotherms are in agreement with the results obtained from the density functional theory and Monte Carlo simulations. The approach is used for determining pore size distributions of carbon materials. We illustrate this with the benzene adsorption data on activated carbon at 20, 50, and 80 degreesC, argon adsorption on activated carbon Norit ROX at 87.3 K, and nitrogen adsorption on activated carbon Norit R1 at 77.3 K.

Control of Aedes vectors of dengue in three provinces of Vietnam by use of Mesocyclops (Copepoda) and community-based methods validated by entomologic, clinical, and serological surveillance

We describe remarkable success in controlling dengue vectors, Aedes aegypti (L.) and Aedes albopictus (Skuse), in 6 communes with 11,675 households and 49,647 people in the northern provinces of Haiphong, Hung Yen, and Nam Dinh in Vietnam. The communes were selected for high-frequency use of large outdoor concrete tanks and wells. These were found to be the source of 49.6-98.4% of Ae. aegypti larvae, which were amenable to treatment with local Mesocyclops, mainly M. woutersi Van der Velde, M. aspericornis (Daday) and M. thermocyclopoides Harada. Knowledge, attitude, and practice surveys were performed to determine whether the communities viewed dengue and dengue hemorrhagic fever as a serious health threat; to determine their knowledge of the etiology, attitudes, and practices regarding control methods including Mesocyclops; and to determine their receptivity to various information methods. On the basis of the knowledge, attitude, and practice data, the community-based dengue control program comprised a system of local leaders, health volunteer teachers, and schoolchildren, supported by health professionals. Recycling of discards for economic gain was enhanced, where appropriate, and this, plus 37 clean-up campaigns, removed small containers unsuitable for Mesocyclops treatment. A previously successful eradication at Phan Boi village (Hung Yen province) was extended to 7 other villages forming Di Su commune (1,750 households) in the current study. Complete control was also achieved in Nghia Hiep (Hung Yen province) and in Xuan Phong (Nam Dinh province); control efficacy was greater than or equal to 99.7% in the other 3 communes (Lac Vien in Haiphong, Nghia Dong, and Xuan Kien in Nam Dinh). Although tanks and wells were the key container types of Ae. aegypti productivity, discarded materials were the source of 51% of the standing crop of Ae. albopictus. Aedes albopictus larvae were eliminated from the 3 Nam Dinh communes, and 86-98% control was achieved in the other 3 communes. Variable dengue attack rates made the clinical and serological comparison of control and untreated communes problematic, but these data indicate that clinical surveillance by itself is inadequate to monitor dengue transmission.

Leaf water relations of Eucalyptus cloeziana and Eucalyptus argophloia in response to water deficit

Leaf water relations responses to limited water supply were determined in 7-month-old plants of a dry inland provenance of Eucalyptus argophloia Blakely and in a humid coastal provenance (Gympie) and a dry inland provenance (Hungry Hills) of Eucalyptus cloeziana F. Muell. Each provenance of E. cloeziana exhibited a lower relative water content at the turgor loss point, a lower apoplastic water content, a smaller ratio of dry mass to turgid mass and a lower bulk modulus of elasticity than the single provenance of E. argophloia. Osmotic potential at full turgor and water potential at the turgor loss point were significantly lower in E. argophloia and the inland provenance of E. cloeziana than in the coastal provenance of E. cloeziana. There was limited osmotic adjustment in response to soil drying in E. cloeziana, but not in E. argophloia. Between-species differences in water relations parameters were larger than those between the E. cloeziana provenances. Both E. cloeziana provenances maintained turgor under moderate water stress through a combination of osmotic and elastic adjustments. Eucalyptus argophloia had more rigid cell walls and reached lower water potentials with less reduction in relative water content than either of the E. cloeziana provenances, thereby enabling it to extract water from dryer soils.

A yield architecture framework to explain adaptation of pearl millet to environmental stress

Functional knowledge of the physiological basis of crop adaptation to stress is a prerequisite for exploiting specific adaptation to stress environments in breeding programs. This paper presents an analysis of yield components for pearl millet, to explain the specific adaptation of local landraces to stress environments in Rajasthan, India. Six genotypes, ranging from high-tillering traditional landraces to low-tillering open-pollinated modern cultivars, were grown in 20 experiments, covering a range of nonstress and drought stress patterns. In each experiment, yield components (particle number, grain number, 100 grain mass) were measured separately for main shoots, basal tillers, and nodal tillers. Under optimum conditions, landraces had a significantly lower grain yield than the cultivars, but no significant differences were observed at yield levels around 1 ton ha(-1). This genotype x environment interaction for grain yield was due to a difference in yield strategy, where landraces aimed at minimising the risk of a crop failure under stress conditions, and modem cultivars aimed at maximising yield potential under optimum conditions. A key aspect of the adaptation of landraces was the small size of the main shoot panicle, as it minimised (1) the loss of productive tillers during stem elongation; (2) the delay in anthesis if mid-season drought occurs; and (3) the reduction in panicle productivity of the basal tillers under stress. In addition, a low investment in structural panicle weight, relative to vegetative crop growth rate, promoted the production of nodal tillers, providing a mechanism to compensate for reduced basal tiller productivity if stress occurred around anthesis. A low maximum 100 grain mass also ensured individual grain mass was little affected by environmental conditions. The strategy of the high-tillering landraces carries a yield penalty under optimum conditions, but is expected to minimise the risk of a crop failure, particularly if mid-season drought stress occurs. The yield architecture of low-tillering varieties, by contrast, will be suited to end-of-season drought stress, provided anthesis is early. Application of the above adaptation mechanisms into a breeding program could enable the identification of plant types that match the prevalent stress patterns in the target environments. (C) 2003 E.J. van Oosterom. Published by Elsevier Science B.V. All rights reserved.

Relationships and estimates of longitudinal growth stress in Eucalyptus dunnii at different ages

O objetivo desse trabalho foi obter estimativas da tensão de crescimento longitudinal em árvores vivas e verificar a sua relação com algumas características da madeira de Eucalyptus dunnii Maiden aos oito, treze, quinze e dezenove anos de idade. O material foi proveniente da Empresa Procopiak Compensados e Embalagens S.A., localizada no Município de Canoinhas, Santa Catarina. Os níveis de tensão longitudinal de crescimento foram mensurados indiretamente pelo método do "CIRAD-Forêt", na árvore viva, e estimados a partir do módulo de elasticidade dinâmico e do módulo de elasticidade obtido no ensaio de tração paralela à grã. A deformação residual longitudinal (DRL) e as estimativas das tensões de crescimento longitudinais apresentaram tendência de aumento, na média, com a idade do material. A DRL apresentou correlação, positiva e significativa, com todas as estimativas das tensões de crescimento longitudinais, sendo de maior magnitude aos 13, 15 e 19 anos de idade. A densidade básica apresentou maiores correlações, positivas e significativas, com o módulo de elasticidade dinâmico, estimado no sentido longitudinal, para a madeira na condição de saturação e a 12% de umidade, em todas as idades avaliadas. Todas as estimativas das tensões de crescimento longitudinais apresentam elevadas correlações, positivas e significativas, entre si.

Electro-mechanical properties of triblock copolymer styrene-butadiene-styrene / carbon nanotube composites for large deformation sensor applications

Thermoplastic elastomer/carbon nanotube composites are studied for sensor applications due to their excellent mechanical and electrical properties. Piezoresisitive properties of tri-block copolymer styrene-butadiene-styrene (SBS)/ carbon nanotubes (CNT) prepared by solution casting have been investigated. Young modulus of the SBS/CNT composites increases with the amount of CNT filler content present in the samples, without losing the high strain deformation on the polymer matrix (~1500 %). Further, above the percolation threshold these materials are unique for the development of large deformation sensors due to the strong piezoresistive response. Piezoresistive properties evaluated by uniaxial stretching in tensile mode and 4-point bending showed a Gauge Factors up to 120. The excellent linearity obtained between strain and electrical resistance makes these composites interesting for large strain piezoresistive sensors applications.

Improving FEM crash simulation accuracy through local thickness estimation based on CAD data

In this paper, we present a method for estimating local thickness distribution in nite element models, applied to injection molded and cast engineering parts. This method features considerable improved performance compared to two previously proposed approaches, and has been validated against thickness measured by di erent human operators. We also demonstrate that the use of this method for assigning a distribution of local thickness in FEM crash simulations results in a much more accurate prediction of the real part performance, thus increasing the bene ts of computer simulations in engineering design by enabling zero-prototyping and thus reducing product development costs. The simulation results have been compared to experimental tests, evidencing the advantage of the proposed method. Thus, the proposed approach to consider local thickness distribution in FEM crash simulations has high potential on the product development process of complex and highly demanding injection molded and casted parts and is currently being used by Ford Motor Company.

Tourism impacts of a portuguese world heritage historic center: residents’ perspectives

The aim of this study is twofold. First, the study analyzes local community perspectives of the importance of the WHS classification of the historic center of Évora. Second, the study analyzes local residents’ perceived tourism impacts on the municipality of Évora. The methodology comprises quantitative research based on a self-administered survey applied to convenience samples of local residents of Évora in the beginning of 2014. The main results reveal that local residents have a strongly positive perception of the WHS designation. With regard to the perceived tourism impacts, a principal component factor analysis delineated three positive and three negative tourism impacts. The comparison of the mean scores of these factors across residents that live near and far from the historic center reveals that the most valued and least valued factors are common to all groups of residents. Nevertheless, in terms of positive impacts, the residents that live near the historic center revealed higher means than the residents that live far from it, whereas in terms of negative impacts, the latter group revealed higher means than former group.

Residents’ perspectives on tourism impacts of portuguese world heritage historic centers: Angra do Heroísmo and Évora

The aim of this study is twofold. First, the study analyzes local community perspectives of the importance of the World Heritage Site (WHS) classification of the historic centers of Angra do Heroísmo and Évora. Second, the study analyzes local residents’ perceived tourism impacts on the municipalities of Angra do Heroísmo and Évora. The methodology comprises quantitative research based on a self-administered survey applied to convenience samples of local residents of the two Portuguese municipalities in 2014. The main results reveal that local residents have a strongly positive perception of the WHS designation in both municipalities. With regard to the perceived tourism impacts, residents from Angra do Heroísmo have a stronger agreement about the impacts of tourism on their city than the residents of Évora, except for the negative social and cultural impacts. The comparison of the mean scores of these impacts across residents that live near and far from the historic centers reveals that the most valued and least valued impacts in the three categories of impacts (economic, social and cultural, and environmental) are common to all groups of residents. Nevertheless, residents living in or near the historic center of Angra do Heroísmo have higher means in the majority of tourism impacts (in all categories), with only one negative impact to concern the majority of respondents. Among the residents from Évora, residents living in or near the historic center have higher means in the majority of economic impacts but lower means in almost social and cultural impacts. With regard to the environmental impacts, residents living in or near the historic center have higher means scores in the positive impacts and lower means scores in the negative environmental impacts.

A reorganização do poder local e o impacto da fusão de municípios

Esta dissertação pretende estudar e demonstrar a importância da reorganização territorial ao nível do poder local, analisando em particular a fusão dos municípios de Aveiro e de Ílhavo. O principal objectivo deste trabalho reside em medir as implicações da reorganização territorial por via da fusão de municípios, o que é conseguido através do estudo da evolução histórica das várias reformas administrativas ocorridas em Portugal, com especial ênfase o século XIX devido ao seu enorme ímpeto reformista, bem como da análise de um caso muito específico de dois municípios vizinhos, que partilhando uma mesma realidade espacial e natural (Ria de Aveiro), já foram, em determinada época, um só município. Procurar-se-ão aferir quais os aspectos determinantes na tomada de decisão relativamente a esta temática, bem como avaliar os principais obstáculos e benefícios da sua concretização.