Ontology-based representation and generation of workflows for micro-task human-machine computation

Doctoral Program in Computer Science

A GIS extension model to calculate urban heat island intensity based on urban geometry

This paper presents a simulation model, which was incorporated into a Geographic Information System (GIS), in order to calculate the maximum intensity of urban heat islands based on urban geometry data. The method-ology of this study stands on a theoretical-numerical basis (Okeâ s model), followed by the study and selection of existing GIS tools, the design of the calculation model, the incorporation of the resulting algorithm into the GIS platform and the application of the tool, developed as exemplification. The developed tool will help researchers to simulate UHI in different urban scenarios.

Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process

The performance of parts produced by Free Form Extrusion (FFE), an increasingly popular additive manufacturing technique, depends mainly on their dimensional accuracy, surface quality and mechanical performance. These attributes are strongly influenced by the evolution of the filament temperature and deformation during deposition and solidification. Consequently, the availability of adequate process modelling software would offer a powerful tool to support efficient process set-up and optimisation. This work examines the contribution to the overall heat transfer of various thermal phenomena developing during the manufacturing sequence, including convection and radiation with the environment, conduction with support and between adjacent filaments, radiation between adjacent filaments and convection with entrapped air. The magnitude of the mechanical deformation is also studied. Once this exercise is completed, it is possible to select the material properties, process variables and thermal phenomena that should be taken in for effective numerical modelling of FFE.

Renewable energy system for an isolated micro grid

This paper presents the development of the power electronics needed for the interaction between the electrical generator of a wind turbine and an isolated ac micro grid. In this system there are basically two types of receptors for the energy produced by the wind turbine, which are the loads connected to the isolated micro grid and the batteries used to store energy. There are basically two states in which the system will work. One of the states is when there is enough wind power to supply the loads and the extra energy is used to charge the batteries. The other state is when there is low wind power and the batteries have to compensate the lack of power, so that the isolated micro grid has enough power to supply at least the priority loads. In this paper are presented the hardware and the control algorithm for the developed system. The topology was previously tested in computer simulations, using the software PSIM 9.0, and then validated with the implementation of a laboratory prototype.

Quantificação de macro e micro nutrientes em algumas etnovariedades de cubiu (Solanum sessiliflorum Dunal)

Considerando a ampla variabilidade genética de cubiu (Solanum sessiliflorum Dunal), quantificaram-se os macro e micro-nutrientes, objetivando a ampliação da tabela de composição química de alimentos típicos da região amazônica. Os frutos provenientes da Estação Experimental de Hortaliças Alejo von der Pahlen (EEH) do Instituto Nacional de Pesquisas da Amazônia (INPA), localizados no km 14 da Rodovia AM 010 em Manaus, AM, foram processados no Laboratório de Alimentos e Nutrição do INPA. Avaliaram-se oito etnovariedades de cubiu identificados como: 2 I, 3 I, 6, 7, 12, 14, 17, 29 I e III em estádio de maturação comercial. Os teores de elementos minerais foram quantificados pela técnica de Ativação por Nêutrons Instrumental e a fibra alimentar pelo método enzímico-gravimétrico. Os resultados demonstram ser o cubiu um fruto com baixo conteúdo energético (média de 33 kcal), com conteúdo de fibra alimentar total na ordem de 1,6%. Em relação aos macros elementos minerais, a etnovariedade 6, apresentou a maior concentração em potássio (513,5±3,1mg), cálcio (18,9±0,6mg) e a etnovariedade 2 I em Fe (564,4±58,1µg) e Cr (99,3±8,3µg). A menor concentração foi constatada na etnovariedade 12 para os elementos K (229,0±4,5mg), Na (53,7±5,5µg) e Zn (89,3±4,7µg). Apesar das variações em relação as diferentes etno variedades e conseqüentemente concentrações em elementos minerais, o cubiu, pode estar contribuindo para atingir as recomendações desses nutrientes.

A structured inventory of spiders (Arachnida, Araneae) in natural and artificial forest gaps at Porto Urucu, Western Brazilian Amazonia

A preliminary survey of the spider fauna in natural and artificial forest gap formations at “Porto Urucu”, a petroleum/natural gas production facility in the Urucu river basin, Coari, Amazonas, Brazil is presented. Sampling was conducted both occasionally and using a protocol composed of a suite of techniques: beating trays (32 samples), nocturnal manual samplings (48), sweeping nets (16), Winkler extractors (24), and pitfall traps (120). A total of 4201 spiders, belonging to 43 families and 393 morphospecies, were collected during the dry season, in July, 2003. Excluding the occasional samples, the observed richness was 357 species. In a performance test of seven species richness estimators, the Incidence Based Coverage Estimator (ICE) was the best fit estimator, with 639 estimated species. To evaluate differences in species richness associated with natural and artificial gaps, samples from between the center of the gaps up to 300 meters inside the adjacent forest matrix were compared through the inspection of the confidence intervals of individual-based rarefaction curves for each treatment. The observed species richness was significantly higher in natural gaps combined with adjacent forest than in the artificial gaps combined with adjacent forest. Moreover, a community similarity analysis between the fauna collected under both treatments demonstrated that there were considerable differences in species composition. The significantly higher abundance of Lycosidae in artificial gap forest is explained by the presence of herbaceous vegetation in the gaps themselves. Ctenidae was significantly more abundant in the natural gap forest, probable due to the increase of shelter availability provided by the fallen trees in the gaps themselves. Both families are identified as potential indicators of environmental change related to the establishment or recovery of artificial gaps in the study area.

Estudo da adaptação da espécie Piper hispidinervum C. DC. (pimenta longa) à região do Vale do Itajaí - SC, através da composição química do óleo essencial obtido por hidrodestilação por micro-ondas e convencional

Neste trabalho, a espécie Piper hispidinervum (pimenta longa), endêmica do estado do Acre, foi cultivada na região do Vale do Itajaí - SC, e sua adaptação foi avaliada em relação à composição química do óleo essencial obtido pelos processos de hidrodestilação convencional e por micro-ondas. O safrol foi identificado como o constituinte majoritário do óleo essencial desta espécie, o qual foi empregado como parâmetro de avaliação da capacidade de adaptação desta planta à região sul do Brasil, já que a proposta abrange avaliar a utilização desta espécie como fonte alternativa de safrol, em substituição a Canela Sassafrás (Ocotea odorifera), espécie muito explorada até a década de 90 nesta região. As amostras da planta foram obtidas de diferentes regiões do Acre e foram cultivadas na estação experimental da EPAGRI - Itajaí-SC. O óleo essencial das folhas forneceu um teor médio de safrol entre 76,6% e 89,9%. A análise por CG-DIC e CG-EM do óleo com maior concentração de safrol, apresentou os seguintes constituintes: safrol (89,93%), α-terpineno (0,35%), (E)-β-ocimeno (0,54%), terpinoleno (3,10%), valenceno (0,21%), (Z)-β-bisaboleno (1,70%) e guaiol (0,29%).

Wear of PEEK-Ti6Al4V systems under micro-abrasion and linear sliding conditions

Dissertação de mestrado integrado em Engenharia Biomédica

Controlled aggregation of gold nanoparticles in a di-ureasilmatrix. Optical and micro indentation investigation

Nanocomposite materials with an organic-inorganic urea-silicate (di-ureasil) based matrix containing gold nanoparticles (NPs) were synthesized and characterized by optical (UV/Vis) spectroscopy and indentation measurement. The urea silicate gels were obtained by reaction between silicon alkoxyde modified by isocyanate group and polyethylene glycol oligomer with amine terminal groups in presence of catalyst. The latter ensures the successful incorporation of citrate-stabilized gold NPs in the matrix. It is shown that using a convenient destabilizing agent (AgNO3) and governing the preparative conditions, the aggregation degree of gold NPs can be controlled. The developed synthesis procedure significantly simplifies the preparative procedure of gold/urea silicate nanocomposites, compared to the procedure using gold NPs, preliminary covered with silica shells. Mechanical properties of the prepared sample were characterised using depth sensing indentation methods (DSI) and an idea about the type of aggregation structures was suggested.

Micro- and mesoporous structures as drug delivery carriers for salicylic acid

The potential of salicylic acid (SA) encapsulated in porous materials as drug delivery carriers for cancer treatment was studied. Different porous structures, the microporous zeolite NaY, and the mesoporous SBA-15 and MCM-41 were used as hosts for the anti-inflammatory drug. Characterization with different techniques (FTIR, UV/vis, TGA, 1H NMR, and 13C CPMAS NMR) demonstrated the successful loading of SA into the porous hosts. The mesoporous structures showed to be very efficient to encapsulate the SA molecule. The obtained drug delivery systems (DDS) accommodated 0.74 mmol (341 mg/gZEO) in NaY and 1.07 mmol (493 mg/gZEO) to 1.23 mmol (566 mg/gZEO) for SBA-15 and MCM-41, respectively. Interactions between SA molecules and pore structures were identified. A fast and unrestricted liberation of SA at 10 min of the dissolution assay was achieved with 29.3, 46.6, and 50.1 µg/mL of SA from NaY, SBA-15, and MCM-41, respectively, in the in vitro drug release studies (PBS buffer pH 7.4, 37 °C). Kinetic modeling was used to determine the release patterns of the DDS. The porous structures and DDS were evaluated on Hs578T and MDA-MB-468 breast cancer cell lines viability. The porous structures are nontoxic to cancer cells. Cell viability reduction was only observed after the release of SA from MCM- 41 followed by SBA-15 in both breast cancer cell lines.

Bacterial nanocellulose as a structured platform for conductive biopolymers

[Exert] Since the discovery that polyacetylene could be doped to the metallic state more than 3 decades ago, an ever-growing body of a multidisciplinary approach to material design, synthesis, and system integration has been evidenced. The present chapter will primarily review the emerging field of intrinsically conducting polymer and conductive polymer blends, with polyaniline and polypyrrole as the major representatives of conducting polymers. This survey will also address some of the potential areas for applications of such conductive polymer blends. Also, current results concerning the chemical polymerization of conducting polymers on bacterial nanocellulose (BNC) will be presented, including brief remarks on the rationale for the use of conductive BNC blends. This will be followed by a discussion on their properties and potential applications (...).

Estudo de estirpes probióticas como inoculantes de silagens para o controlo de micotoxinas

Dissertação de mestrado em Bioengenharia

Careers, identities and professionalization. A study on doctors about their social representations related to the labor market today and its foreseeable future

This study is in line with the analyses of university and working career in their interaction in relation with conditioning factors. It comprises two central issues: the issue of identity bound to the issue of professionalization within the domain of training and employment. Nowadays, professionalization of the individuals, inside a troubled occupational world, demands the implementation of mechanisms favoring the development of both the individuals and the institution in which they work. All this has an impact at the local, regional and even national levels. Three levels of analysis interplay from a sui generis perspective: macro-meso-micro-macro (Aparicio, 2005; 2007a; 2007b, 2013a, 2014, 2015 b, d – See the Three- Dimensional Spiral of Sense Theory). The aim was to be aware of the doctors’ representations regarding the value of such degree under the present “degree devaluation”, and its impact on the professional future as well as on the core issues of the labor market which need urgent measures with a view to a belter interaction between the two systems. The methodology used was quanti-qualitative (semi-structured questionnaires, interviews, and hierarchical evocations). The population consisted of doctors (2005-2012) from the National University of Cuyo, in Argentina. The results helped us understand the nucleus of such representations and the peripheral aspects by career and institution, thus revealing professional and disciplinary identities. The professional identities show the situated needs in terms of professionalization within the different contexts and, particularly, within the labor market.

Volumosas fístulas de ambas coronárias para a artéria pulmonar: embolização percutânea com micro-molas e balões destacáveis

Mulher de 43 anos, sintomática (dispnéia e palpitações), apresentava múltiplas fístulas de alto débito de ambas coronárias para a artéria pulmonar, embolizadas percutaneamente com micro-molas de liberação controlada e balões destacáveis, com sucesso.