A Communication Intervention for Training Southern European Oncologists to Recognize Psychosocial Morbidity in Cancer. I - Development of the Model and Preliminary Results on Physicians' Satisfaction

BACKGROUND: The detection of psychosocial distress is a significant communication problem in Southern Europe and other countries. Work in this area is hampered by a lack of data. Because not much is known about training aimed at improving the recognition of psychosocial disorders in cancer patients, we developed a basic course model for medical oncology professionals. METHODS: A specific educational and experiential model (12 hours divided into 2 modules) involving formal teaching (ie, journal articles, large-group presentations), practice in small groups (ie, small-group exercises and role playing), and discussion in large groups was developed with the aim of improving the ability of oncologists to detect emotional disturbances in cancer patients (ie, depression, anxiety, and adjustment disorders). RESULTS: A total of 30 oncologists from 3 Southern European countries (Italy, Portugal, and Spain) participated in the workshop. The training course was well accepted by most participants who expressed general satisfaction and a positive subjective perception of the utility of the course for clinical practice. Of the total participants, 28 physicians (93.3%) thought that had they been exposed to this material sooner, they would have incorporated the techniques received in the workshop into their practices; 2 participants stated they would likely have done so. Half of the doctors (n = 15) believed that their clinical communication techniques were improved by participating in the workshop, and the remaining half thought that their abilities to communicate with cancer patients had improved. CONCLUSIONS: This model is a feasible approach for oncologists and is easily applicable to various oncology settings. Further studies will demonstrate the effectiveness of this method for improving oncologists skills in recognizing emotional disorders in their patients with cancer.

Extracting temporal and spatial distributions information about marine mucilage phenomenon based on Modis satellite images; a case study of the Tyrrhenian and the Adriatic Sea, 2010-2012

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Implementation of a pilot project for the treatment and prevention of substance abuse in children and adolescents : strengthening families for parents and youths 12-16

RESUMO: Antecendentes: Uma avaliação dos serviços de abuso de substâncias em Barbados identificou a necessidade de programas e serviços que são projetados especificamente para crianças e adolescentes. Objetivo: Realizar programa com base em evidências para reduzir a incidência de abuso de drogas entre crianças e adolescentes por meio do fortalecimento da unidade familiar através de parentalidade positiva, de maior funcionamento familiar e de resistência dos jovens. Método: Dois projetos-piloto foram realizadas com base no programa "Fortalecer as Famílias para Pais e Jovens de 12 a 16 anos (SFPY). O programa de nove semanas foi empregado como uma intervenção para criar laços familiares mais fortes, aumentar a resistência dos jovens e reduzir o abuso de drogas entre crianças e adolescentes de idades de 11 a 16 anos. A decisão foi tomada para incluir participantes de 11 anos desde que as crianças possam estar no primeiro ano da escola secundária nessa idade. IMPLEMENTATION OF SUBSTANCE ABUSE PILOT PROJECT FOR CHILDREN AND ADOLESCENTS 5 Resultados: Quinze famílias participaram em dois projetos-piloto e a avaliação final mostrou que os jovens após o programa, geralmente tornaram-se mais positivos sobre o seu lugar na unidade familiar e sentiram que sua participação no programa foi benéfica. Os pais, da mesma forma, relataram que eles conquistaram, com o programa uma relação mais positiva, uma melhor compreensão das necessidades, e consciência das mudanças de desenvolvimento de seus jovens. Desta forma, considera-se que o programa atingiu o resultado desejado de criar unidades familiares mais fortes. Conclusão: O Projeto Piloto “SFPY” foi bem sucedido em fazer pais e jovens mais conscientes de suas necessidades individuais e de responsabilidades dentro da unidade familiar. Como resultado, o relacionamentos das respectivas famílias melhorou. Estudos baseados em evidências têm demonstrado que um relação familiar mais forte diminui a incidência de uso e abuso de drogas na população adolescente, aumentando os fatores de proteção e diminuindo os fatores de risco. A implementação do programa, que foi desenvolvido e testado no ambiente norte-americano, demonstrou que era transferível para a sociedade de Barbados. No entanto, seu impacto total só pode ser determinado através de um estudo comparativo envolvendo um grupo de controle e / ou uma intervenção alternativa ao abuso de substâncias. Portanto, é recomendável que um estudo comparativo da intervenção SFPY deve envolver uma amostra representativa de adolescentes que estão em estágio de desenvolvimento anterior mais cedo. Evidências já demonstram que o programa é mais eficaz, com impacto mais longo sobre os jovens que participam em uma idade maisABSTRACT:Background: An evaluation of substance abuse services in Barbados has identified the need for programmes and services that are specifically designed for children and adolescents. Aim: To conduct an evidence-based programme to reduce the incidence of substance abuse among children and adolescents by strengthening the family unit through positive parenting, enhanced family functioning and youth resilience. Method: Two pilot projects were conducted based on the ‘Strengthening Families for Parents and Youths 12– 16’ (SFPY) programme. The nine-week programme was employed as an intervention to create stronger family connections, increase youth resiliency and reduce drug abuse among children and adolescents between the ages of 11 to 16. The decision was made to include participants from age 11 since children may be in the first year of secondary school at this age. IMPLEMENTATION OF SUBSTANCE ABUSE PILOT PROJECT FOR CHILDREN AND ADOLESCENTS 3 Results: Fifteen families participated in two pilot projects and an evaluation conducted at the conclusion showed that the youth were generally more positive about their perceived place in the family unit and felt that the being in the programme was generally beneficial. The parents similarly reported they had a more positive relationship with their youths and also had a better understanding of their needs, and an awareness of their developmental changes. This affirmed that the programme had achieved its desired outcome to create stronger family units. Conclusion: The SFPY Pilot Project was successful in making parents and youths more aware of their individual needs and responsibilities within the family unit. As a result relationships within their respective families were strengthened. Evidence-based studies have shown that enhanced family functioning decreases the incidence of substance use and abuse in the adolescent population by increasing protective factors and decreasing risk factors. The implementation of the programme, which was developed and tested in the North American environment, demonstrated that it was transferable to the Barbadian society. However, its full impact can only be determined through a comparative study involving a control group and/or an alternative substance abuse intervention. It is therefore recommended that a comparative study of the SFPY intervention should be delivered to a representative sample of adolescents who are at an earlier developmental stage. Evidence has shown that the programme is more effective, with longer impact on youths who participate at a younger age.

The brushstroke and materials of Amadeo de Souza-Cardoso combined in an authentication tool

Nowadays, authentication studies for paintings require a multidisciplinary approach, based on the contribution of visual features analysis but also on characterizations of materials and techniques. Moreover, it is important that the assessment of the authorship of a painting is supported by technical studies of a selected number of original artworks that cover the entire career of an artist. This dissertation is concerned about the work of modernist painter Amadeo de Souza-Cardoso. It is divided in three parts. In the first part, we propose a tool based on image processing that combines information obtained by brushstroke and materials analysis. The resulting tool provides qualitative and quantitative evaluation of the authorship of the paintings; the quantitative element is particularly relevant, as it could be crucial in solving authorship controversies, such as judicial disputes. The brushstroke analysis was performed by combining two algorithms for feature detection, namely Gabor filter and Scale Invariant Feature Transform. Thanks to this combination (and to the use of the Bag-of-Features model), the proposed method shows an accuracy higher than 90% in distinguishing between images of Amadeo’s paintings and images of artworks by other contemporary artists. For the molecular analysis, we implemented a semi-automatic system that uses hyperspectral imaging and elemental analysis. The system provides as output an image that depicts the mapping of the pigments present, together with the areas made using materials not coherent with Amadeo’s palette, if any. This visual output is a simple and effective way of assessing the results of the system. The tool proposed based on the combination of brushstroke and molecular information was tested in twelve paintings obtaining promising results. The second part of the thesis presents a systematic study of four selected paintings made by Amadeo in 1917. Although untitled, three of these paintings are commonly known as BRUT, Entrada and Coty; they are considered as his most successful and genuine works. The materials and techniques of these artworks have never been studied before. The paintings were studied with a multi-analytical approach using micro-Energy Dispersive X-ray Fluorescence spectroscopy, micro-Infrared and Raman Spectroscopy, micro-Spectrofluorimetry and Scanning Electron Microscopy. The characterization of Amadeo’s materials and techniques used on his last paintings, as well as the investigation of some of the conservation problems that affect these paintings, is essential to enrich the knowledge on this artist. Moreover, the study of the materials in the four paintings reveals commonalities between the paintings BRUT and Entrada. This observation is supported also by the analysis of the elements present in a photograph of a collage (conserved at the Art Library of the Calouste Gulbenkian Foundation), the only remaining evidence of a supposed maquete of these paintings. The final part of the thesis describes the application of the image processing tools developed in the first part of the thesis on a set of case studies; this experience demonstrates the potential of the tool to support painting analysis and authentication studies. The brushstroke analysis was used as additional analysis on the evaluation process of four paintings attributed to Amadeo, and the system based on hyperspectral analysis was applied on the painting dated 1917. The case studies therefore serve as a bridge between the first two parts of the dissertation.

How do current term structure model behave beyond the last liquid point?: A comparison of the DNS and Smith-Wilson methods

A Work Project, presented as part of the requirements for the Award of a Master’s Double Degree in Finance from Maastricht University and NOVA – School of Business and Economics

Analysis of chromium behaviour and speciation during the electrodialytic process

The interest in chromium (Cr) arises from the widespread use of this heavy metal in various industrial processes that cause its release as liquid, solid and gaseous waste into the environment. The impact of Cr on the environment and living organisms primarily depends on its chemical form, since Cr(III) is an essential micronutrient for humans, other animals and plants, and Cr(VI) is highly toxic and a known human carcinogen. This study aimed to evaluate if the electrodialytic process (ED) is an appropriate treatment for Cr removal, through a critical overview of Cr speciation, before and after the ED experiments, to assess possible Cr(III)-Cr(VI) interconversions during the treatment. ED was the treatment technique applied to two types of matrices containing Cr: chromate copper arsenate (CCA) contaminated soil and municipal solid waste incineration (MSWI) fly ash. In order to study Cr remediation, three EDR set-ups were used: a new set-up, the combined cell (2/3C or 3/2C), with three compartments, alternating current between two anodes and different initial experimental conditions, one set-up with three compartments (3C cell) and the other set-up with two compartments (2C cell). The Cr removal rates obtained in this study were between 10-36% for the soil, and 1-13% for the fly ash. The highest Cr removal rates were achieved in the 26 days experiments: 36% for the soil, 13% for the fly ash. Regarding the 13 days experiments, the highest Cr removal rates were attained with the 2/3C set-up: 24% for the soil, 5% for the fly ash. The analysis of Cr(VI) was performed before and after ED experiments to evaluate eventual changes in Cr speciation during the treatment. This analysis was conducted by two methods: USEPA Method 3060A, for the extraction of Cr(VI); and Hach Company Method 8023, for the detection of Cr(VI). Despite the differences in Cr total concentration, both matrices presented a similar speciation, with Cr(III) being the main species found and Cr(VI) less than 3% of Cr total, before and after the treatment. For fly ash, Cr(VI) was initially below the detection limit of the method and remained that way after the treatment. For soil, Cr(VI) decreased after the treatment. Oxidation of Cr(III) to Cr(VI) did not occur during the ED process since there was no increase in Cr(VI) in the matrices after the treatment. Hence, the results of this study indicate that ED is an appropriate technique to remediate matrices containing Cr because it contributes to Cr removal, without causing Cr(III)-Cr(VI) interconversions.

Causes of low vision and use of optical aids in the elderly

PURPOSE: To determine the causes of low vision in an elderly population attended by a university visual rehabilitation service and to check for the use of prescribed optical aids. METHOD: A cross-sectional study was carried out on patients aged 60 years or over attending for the first time a university low vision service in 2001. Ophthalmic reevaluation and interview were performed by means of a structured questionnaire in 2002. RESULTS: The sample comprised 50 subjects aged between 60 and 90 years. Severe low vision (<20/200) was present in 68.0% of patients. The main cause of low vision was age-related macular degeneration (44.0%). Regarding literacy, 16.0% were illiterate and 72.0% had completed fundamental schooling. Thirty-one patients (62.0%) had been prescribed optical aids; 54.8% of these patients stated that they use them. A majority (70.6%) held a favorable opinion of these aids. CONCLUSIONS: The main cause of low vision was age-related macular degeneration. Approximately half of those receiving prescriptions reported actually using the aids in their daily activities. Making best use of residual vision in the elderly population with visual impairment is a priority, given the social context, if the independence necessary for enhanced quality of life is to be achieved.

Thin panels of cement composites reinforced with recycled fibres for the shear strengthening of reinforced concrete elements

A new technique was developed for producing thin panels of a cement based material reinforced with relatively high content of steel fibres originated from the industry of tyre recycling. Flexural tests with notched and un-notched specimens were carried out to characterize the mechanical properties of this Fibre Reinforced Cement Composite (FRCC) and the results are presented and discussed. The values of the fracture mode I parameters of the developed FRCC were determined by performing inverse analysis with test results obtained in three point notched beam bending tests. To appraise the potentialities of these FRCC panels for the increase of the shear capacity of reinforced (RC) beams, numerical research was performed on the use of developed FRCC panel for shear reinforcement by applying the panels in the lateral faces of RC beams deficiently reinforced in shear.

Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material

Given the need for using more sustainable constructive solutions, an innovative composite material based on a combination of distinct industrial by-products is proposed aiming to reduce waste and energy consumption in the production of construction materials. The raw materials are thermal activated flue-gas desulphurization (FGD) gypsum, which acts as a binder, granulated cork as the aggregate and recycled textile fibres from used tyres intended to reinforce the material. This paper presents the results of the design of the composite mortar mixes, the characterization of the key physical properties (density, porosity and ultrasonic pulse velocity) and the mechanical validation based on uniaxial compressive tests and fracture energy tests. In the experimental campaign, the influence of the percentage of the raw materials in terms of gypsum mass, on the mechanical properties of the composite material was assessed. It was observed that the percentage of granulated cork decreases the compressive strength of the composite material but contributes to the increase in the compressive fracture energy. Besides, the recycled textile fibres play an important role in the mode I fracture process and in the fracture energy of the composite material, resulting in a considerable increase in the mode I fracture energy.

The role of automatic shape and position recognitionin streamlining manufacturing

The main features of most components consist of simple basic functional geometries: planes, cylinders, spheres and cones. Shape and position recognition of these geometries is essential for dimensional characterization of components, and represent an important contribution in the life cycle of the product, concerning in particular the manufacturing and inspection processes of the final product. This work aims to establish an algorithm to automatically recognize such geometries, without operator intervention. Using differential geometry large volumes of data can be treated and the basic functional geometries to be dealt recognized. The original data can be obtained by rapid acquisition methods, such as 3D survey or photography, and then converted into Cartesian coordinates. The satisfaction of intrinsic decision conditions allows different geometries to be fast identified, without operator intervention. Since inspection is generally a time consuming task, this method reduces operator intervention in the process. The algorithm was first tested using geometric data generated in MATLAB and then through a set of data points acquired by measuring with a coordinate measuring machine and a 3D scan on real physical surfaces. Comparison time spent in measuring is presented to show the advantage of the method. The results validated the suitability and potential of the algorithm hereby proposed

Using polymers to improve the rutting resistance of asphalt concrete

This study assesses rutting on two types of modified asphalt mixtures containing: (i) amorphous polyolefin polymer and (ii) a particular polymer obtained by combining LDPE (low density polyethylene) and EVA (ethyl-vinyl-acetate). Rutting tests were performed by a wheel tracking device. Stiffness and fatigue tests were carried out to confirm the performance of the asphalt mixtures. The testing showed that polymer modification in this study improved rut resistance without compromising the stiffness and fatigue behavior. The rutting results were fit in the NCHRP 1-37A model and the in situ rutting performance of asphalt mixtures can be predicted.

Seasonal and spatial variations in limnological conditions of a floodplain lake (lake Catalão) connected to both the Solimões and Negro Rivers, Central Amazonia

Lakes play an important role in biogeochemical, ecological and hydrological processes in the river-floodplain system. The aim of this study was to evaluate the dynamics of the limnological conditions of Catalão Lake, an Amazon floodplain lake. Thus, some of the main limnological environment variables (O2, temperature, pH, nutrient, electrical conductivity) of the Catalão Lake were analyzed under temporal and spacial scales. The study was conducted between November/2004 and August/2005. Sampling excursion were carried out every three months; one excursion for each of the four different hydrological periods (low water, rising water, high water and falling water). Sampling points were chosen so that it could be obtained a gradient of the distance from Negro River. Limnological profiles in Catalão Lake showed generally acidic to slightly alcaline water, with low levels of dissolved oxygen and low concentrations of soluble reactive phosphorous. The Negro River seems to exert the main influence during the rising water period, while the Solimões River is the principal controlling river during peak water. The Principal Component Analysis (PCA) grouped the seasonal collections by hydrological period, showing the formation of a north-south spatial gradient within the lake in relation to the limnological variables. Multivariate dispersion analysis based on distance-to-centroid method demonstrated an increase in similarity over the course of the hydrological cycle, as the lake was inundated in response to the flood pulse of the main river channels. However, the largest spatial homogeneity in the lake was observed in the epilimnion layer, during the falling water period. The daily analysis of variation indicated an oligomitic pattern during the years in which the lake was permanently connected to the Negro River. Although Catalão Lake receives large quantities of both black water from the Negro River and sediment-filled water from the Solimões River, the physical and chemical characteristics of the lake are more similar to those of the Solimões (várzea lake) than the Negro (blackwater lake).

Hot-dip galvanized steel dip-coatedwith ureasilicate hybrid in simulated concrete pore solution: Assessment of coating morphology and corrosion protection efficiency

The barrier effect and the performance of an organic–inorganic hybrid (OIH) sol–gel coating are highlydependent on the coating deposition method as well as processing conditions. In this work, studies onthe influence of experimental parameters using the dip coating method were performed. Factors suchas residence time (Rt), a curing step between each dip step and the number of layers of sol–gel OIHfilms deposited on HDGS to prevent corrosion in highly alkaline environments were studied. These OIHcoatings were obtained using a functionalized siloxane, 3-isociantepropyltriethoxysilane that reactedwith a diamino-functionalized oligopolymer (Jeffamine®D-230). The barrier efficiency of OIH coatings insimulated concrete pore solutions (SCPS) was assessed in the first moments of contact, by electrochemicalimpedance spectroscopy and potentiodynamic methods. The durability and stability of the OIH coatings inSCPS was monitored during eight days by macrocell current density. The morphological characterizationof the surface was performed by scanning electronic microscopy before and after exposure to SCPS.Glow discharge optical emission spectroscopy was used to obtain quantitative composition profiles toinvestigate the thickness of the OIH coatings as a function of the number of layers deposited and theinfluence of the Rt in the coating thickness.

Study of the of the concept of community buildings and its importance for land use efficiency

Nowadays cities are facing several environmental problems due to the population migration to urban areas, which is causing urban sprawl. This way, it is very important to define solutions to improve Land Use Efficiency (LUE). This article proposes the use of community buildings features as a solution to increase land use efficiency. Community buildings consider the design of shared building spaces to reduce the floor area of buildings. This work tests the performance of some case-study buildings regarding LUE to analyse its possible pros and cons. A quantifiable method is used to assess buildingsâ LUE, which considers the number of occupants, the gross floor area, the functional area, the implantation area and the allotment area. Buildings with higher values for this index have reduced environmental impacts because they use less construction materials, produce less construction and demolition wastes and require less energy for building operation. The results showed that the use of community building features can increase Land Use Efficiency of buildings.

Study to determine the cardiovascular risk ofthe population of Guimarães/Vizela, includingthe prevalence of arterial stiffness and early vascular aging syndrome

Tese de Doutoramento em Medicina.