890 resultados para MAG double-wire welding
Resumo:
Saccharomyces cerevisiae mutants deficient in superoxide dismutase genes (sod1delta, sod2delta and the double mutant) were subjected to H2O2 stress in the stationary phase. The highest sensitivity was observed in the sod2delta mutant, while the sod1deltasod2delta double mutant was not sensitive. Sod mutants had lower catalase activity (44%) than wild-type cells, independent of H2O2 stress. Untreated cells of sod1deltasod2delta double mutants showed increased glutathione peroxidase activity (126%), while sod1delta had lower activity (77%) than the wild type. Glutathione levels in sod1delta were increased (200-260%) after exposure to various H2O2 concentrations. In addition, the highest malondialdehyde levels could be observed without H2O2 treatment in sod1delta (167%) and sod2delta (225%) mutants. In contrast, the level of malondialdehyde in the sod1deltasod2delta double mutant was indistinguishable from that of the wild type. These results suggest that resistance to H2O2 by sod1deltasod2delta cells depends on the induction of glutathione peroxidase and is independent of catalase, and that glutathione is a primary antioxidant in the defense against H2O2 in stationary phase sod1delta mutants.
Resumo:
This thesis is made in cooperation with Laboratory of Steel Structures and the steel company SSAB. Maximization of the benefits of high-strength steel usually requires the usage of thin wall thicknesses. This means the failures related to buckling, distortion and warping stand out. One must be aware of these phenomena to design thin-walled structures stressed with forces such as torsional loading. It is also important to take into account small stress ranges when evaluating the accurate fatigue strength of structures. The objective of this thesis is to clarify the theory of the uniform and non-uniform torsion. This paper focuses on warping due to the non-uniform torsion in double symmetric box girder and structural hollow section. The arisen stress states are explained and researched using the finite element method. Another research target is the distortion in double symmetric box girder due to torsion, and the restraining effect of transverse diaphragms at the load end. Multiple transverse diaphragms are used to study more efficient restraining against warping and distortion than a common one end plate structure.
Resumo:
Cardiopulmonary bypass is frequently associated with excessive blood loss. Platelet dysfunction is the main cause of non-surgical bleeding after open-heart surgery. We randomized 65 patients in a double-blind fashion to receive tranexamic acid or placebo in order to determine whether antifibrinolytic therapy reduces chest tube drainage. The tranexamic acid group received an intravenous loading dose of 10 mg/kg, before the skin incision, followed by a continuous infusion of 1 mg kg-1 h-1 for 5 h. The placebo group received a bolus of normal saline solution and continuous infusion of normal saline for 5 h. Postoperative bleeding and fibrinolytic activity were assessed. Hematologic data, convulsive seizures, allogeneic transfusion, occurrence of myocardial infarction, mortality, allergic reactions, postoperative renal insufficiency, and reopening rate were also evaluated. The placebo group had a greater postoperative blood loss (median (25th to 75th percentile) 12 h after surgery (540 (350-750) vs 300 (250-455) mL, P = 0.001). The placebo group also had greater blood loss 24 h after surgery (800 (520-1050) vs 500 (415-725) mL, P = 0.008). There was a significant increase in plasma D-dimer levels after coronary artery bypass grafting only in patients of the placebo group, whereas no significant changes were observed in the group treated with tranexamic acid. The D-dimer levels were 1057 (1025-1100) µg/L in the placebo group and 520 (435-837) µg/L in the tranexamic acid group (P = 0.01). We conclude that tranexamic acid effectively reduces postoperative bleeding and fibrinolysis in patients undergoing first-time coronary artery bypass grafting compared to placebo.
Resumo:
Työn tavoitteena oli kartoittaa MIG/MAG-hitsauslaitteiden toimivuutta kylmissä käyttöolosuhteissa. Työn tarkoituksena oli selvittää miten kylmässä hitsauslaitteet toimivat, mitä ongelmia kylmä käyttölämpötila voi aiheuttaa ja miten hitsauslaitteiden kylmänkestävyyttä voidaan parantaa.
Resumo:
Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.
Resumo:
The present study evaluated the effect of non-absorbable oral polymyxin on the duodenal microflora and clinical outcome of infants with severe infectious diarrhea. Polymyxin was chosen because classic enteropathogenic Escherichia coli was more sensitive to this antibiotic. Twenty-five infants were randomly assigned to a 7-day treatment with oral polymyxin (2.5 mg/kg in 4 daily doses) or placebo. Duodenal and stool cultures were performed before and after the treatment. Five patients were excluded during the study because of introduction of parental antibiotic therapy due to clinical sepsis (N = 3) or rapid clinical improvement (N = 2). In the polymyxin group, small bowel bacterial overgrowth occurred in 61.5% of the cases (8/13) before treatment and in 76.9% (10/13) after treatment. In the placebo group these values were 71.4% (5/7) and 57.1% (4/7), respectively. By the 7th day, clinical cure was observed in 84.6% of the cases (11/13) in the polymyxin group and in 71.4% (5/7) in the placebo group (P = 0.587). Considering all 25 patients included in the study, clinical cure occurred on the 7th day in 12/14 cases (85.7%) in the polymyxin group and 6/11 cases (54.5%) in the placebo group (P = 0.102). Clinical sepsis occurred in 3/11 (27.3%) of the patients in the placebo group and in none (0/14) in the polymyxin group (P = 0.071). Oral polymyxin was not effective in reducing bacterial overgrowth or in improving the clinical outcome of infants hospitalized with severe infectious diarrhea. Taking into account the small sample size, the rate of cure on the 7th day and the rate of clinical sepsis, further studies with greater number of patients are necessary to evaluate these questions.
Resumo:
Type II reaction in leprosy, or erythema nodosum leprosum (ENL), is often characterized by severe clinical symptoms together with nerve function impairment leading to permanent disabilities. Thalidomide has been shown to be a highly effective drug for the treatment of ENL. It is, however, contraindicated for women of childbearing age due to its teratogenicity. On the other hand, pentoxifylline, used to treat hypercoagulable states, is not teratogenic and, like thalidomide, can inhibit the synthesis of tumor necrosis factor-a and other cytokines. In the present randomized double-blind clinical study we compared the effectiveness of orally administered pentoxifylline vs thalidomide in treating type II reaction in 44 patients. Daily doses of 300 mg thalidomide or 1.2 g pentoxifylline were administered for 30 days to multibacillary leprosy patients undergoing type II reaction. Randomly chosen patients were included in the study before, during, and after specific multidrug therapy. Clinical evaluations were performed on the 1st, 7th, 14th, 21st, and 30th days of treatment and laboratory tests were carried out on the 1st and 30th days. As expected, overall, thalidomide proved to be more effective in the treatment of type II leprosy reaction. Nevertheless, continuous treatment with pentoxifylline was effective in relieving the clinical signs of ENL, especially limb edema and systemic symptoms, in 62.5% of the patients.
Resumo:
The effects of haloperidol and olanzapine on polysomnographic measures made in bipolar patients during manic episodes were compared. Twelve DSM-IV mania patients were randomly assigned to receive either haloperidol (mean ± SD final dosage: 5.8 ± 3.8 mg) or olanzapine (mean ± SD final dosage: 13.6 ± 6.9 mg) in a 6-week, double-blind, randomized, controlled clinical trial. One-night polysomnographic evaluation was performed before and after the haloperidol or olanzapine treatment. Psychopathology and illness severity were rated respectively with the Young Mania Rating Scale (YMRS) and the Clinical Global Impressions - Bipolar version (CGI-BP). There was a significant improvement in the YMRS and CGI-BP scores at the end of the study for both groups. Mixed ANOVA used to compare the polysomnographic measures of both drugs demonstrated significant improvement in sleep measures with olanzapine. In the olanzapine group, statistically significant time-drug interaction effects on sleep continuity measures were observed: sleep efficiency (mean ± SEM pre-treatment value: 6.7 ± 20.3%; after-treatment: 85.7 ± 10.9%), total wake time (pre-treatment: 140.0 ± 92.5 min; after-treatment: 55.2 ± 44.2 min), and wake time after sleep onset (pre-treatment: 109.7 ± 70.8 min; after-treatment: 32.2 ± 20.7 min). Conversely, improvement of polysomnographic measures was not observed for the haloperidol group (P > 0.05). These results suggest that olanzapine is more effective than haloperidol in terms of sleep-promoting effects, although olanzapine is comparatively as effective as haloperidol in treating mania. Polysomnography records should provide useful information on how manic states can be affected by psychopharmacological agents.
Resumo:
Medium-voltage motor drives extend the power rating of AC motor drives in industrial applications. Multilevel converters are gaining an ever-stronger foothold in this field. This doctoral dissertation introduces a new topology to the family of modular multilevel converters: the modular double-cascade converter. The modularity of the converter is enabled by the application of multiwinding mediumfrequency isolation transformers. Owing to the innovative transformer link, the converter presents many advantageous properties at a concept level: modularity, high input and output power quality, small footprint, and wide variety of applications, among others. Further, the research demonstrates that the transformer link also plays a key role in the disadvantages of the topology. An extensive simulation study on the new converter is performed. The focus of the simulation study is on the development of control algorithms and the feasibility of the topology. In particular, the circuit and control concepts used in the grid interface, the coupling configurations of the load inverter, and the transformer link operation are thoroughly investigated. Experimental results provide proof-of-concept results on the operation principle of the converter. This work concludes a research collaboration project on multilevel converters between LUT and Vacon Plc. The project was active from 2009 until 2014.
Resumo:
Water deprivation-induced thirst is explained by the double-depletion hypothesis, which predicts that dehydration of the two major body fluid compartments, the extracellular and intracellular compartments, activates signals that combine centrally to induce water intake. However, sodium appetite is also elicited by water deprivation. In this brief review, we stress the importance of the water-depletion and partial extracellular fluid-repletion protocol which permits the distinction between sodium appetite and thirst. Consistent enhancement or a de novo production of sodium intake induced by deactivation of inhibitory nuclei (e.g., lateral parabrachial nucleus) or hormones (oxytocin, atrial natriuretic peptide), in water-deprived, extracellular-dehydrated or, contrary to tradition, intracellular-dehydrated rats, suggests that sodium appetite and thirst share more mechanisms than previously thought. Water deprivation has physiological and health effects in humans that might be related to the salt craving shown by our species.
Resumo:
[1:540000].
Resumo:
In this thesis the effect of focal point parameters in fiber laser welding of structural steel is studied. The goal is to establish relations between laser power, focal point diameter and focal point position with the resulting quality, weld-bead geometry and hardness of the welds. In the laboratory experiments, AB AH36 shipbuilding steel was welded in an I-butt joint configuration using IPG YLS-10000 continuous wave fiber laser. The quality of the welds produced were evaluated based on standard SFS-EN ISO 13919-1. The weld-bead geometry was defined from the weld cross-sections and Vickers hardness test was used to measure hardness's from the middle of the cross-sections. It was shown that all the studied focal point parameters have an effect on the quality, weld-bead geometry and hardness of the welds produced.
Resumo:
Invokaatio: D.D.
Resumo:
Bovine herpesvirus 5 (BoHV-5), the agent of herpetic meningoencephalitis in cattle, is an important pathogen of cattle in South America and several efforts have been made to produce safer and more effective vaccines. In the present study, we investigated in rabbits the virulence of three recombinant viruses constructed from a neurovirulent Brazilian BoHV-5 strain (SV507/99). The recombinants are defective in glycoprotein E (BoHV-5gEΔ), thymidine kinase (BoHV-5TKΔ) and both proteins (BoHV-5gEΔTKΔ). Rabbits inoculated with the parental virus (N = 8) developed neurological disease and died or were euthanized in extremis between days 7 and 13 post-infection (pi). Infectivity was detected in several areas of their brains. Three of 8 rabbits inoculated with the recombinant BoHV-5gEΔ developed neurological signs between days 10 and 15 pi and were also euthanized. A more restricted virus distribution was detected in the brain of these animals. Rabbits inoculated with the recombinants BoHV-5TKΔ (N = 8) or BoHV-5gEΔTKΔ (N = 8) remained healthy throughout the experiment in spite of variable levels of virus replication in the nose. Dexamethasone (Dx) administration to rabbits inoculated with the three recombinants at day 42 pi did not result in viral reactivation, as demonstrated by absence of virus shedding and/or increase in virus neutralizing titers. Nevertheless, viral DNA was detected in the trigeminal ganglia or olfactory bulbs of all animals at day 28 post-Dx, demonstrating they were latently infected. These results show that recombinants BoHV-5TKΔ and BoHV-5gEΔTKΔ are attenuated for rabbits and constitute potential vaccine candidates upon the confirmation of this phenotype in cattle.
Resumo:
Painovuosi nimekkeestä.