Monitoring of Dynamic Bridge Behaviour Using Digital Image Correlation

Bridges are a critical part of North America’s transportation network that need to be assessed frequently to inform bridge management decision making. Visual inspections are usually implemented for this purpose, during which inspectors must observe and report any excess displacements or vibrations. Unfortunately, these visual inspections are subjective and often highly variable and so a monitoring technology that can provide quantitative measurements to supplement inspections is needed. Digital Image Correlation (DIC) is a novel monitoring technology that uses digital images to measure displacement fields without any contact with the bridge. In this research, DIC and accelerometers were used to investigate the dynamic response of a railway bridge reported to experience large lateral displacements. Displacements were estimated using accelerometer measurements and were compared to DIC measurements. It was shown that accelerometers can provide reasonable estimates of displacement for zero-mean lateral displacements. By comparing measurements in the girder and in the piers, it was shown that for the bridge monitored, the large lateral displacements originated in the steel casting bearings positioned above the piers, and not in the piers themselves. The use of DIC for evaluating the effectiveness of rehabilitation of the LaSalle Causeway lift bridge in Kingston, Ontario was also investigated. Vertical displacements were measured at midspan and at the lifting end of the bridge during a static test and under dynamic live loading. The bridge displacements were well within the operating limits, however a gap at the lifting end of the bridge was identified. Rehabilitation of the bridge was conducted and by comparing measurements before and after rehabilitation, it was shown that the gap was successfully closed. Finally, DIC was used to monitor the midspan vertical and lateral displacements in a monitoring campaign of five steel rail bridges. DIC was also used to evaluate the effectiveness of structural rehabilitation of the lateral bracing of a bridge. Simple finite element models are developed using DIC measurements of displacement. Several lessons learned throughout this monitoring campaign are discussed in the hope of aiding future researchers.

Ablation of Steel by Microsecond Pulse Trains

Laser micromachining is an important material processing technique used in industry and medicine to produce parts with high precision. Control of the material removal process is imperative to obtain the desired part with minimal thermal damage to the surrounding material. Longer pulsed lasers, with pulse durations of milli- and microseconds, are used primarily for laser through-cutting and welding. In this work, a two-pulse sequence using microsecond pulse durations is demonstrated to achieve consistent material removal during percussion drilling when the delay between the pulses is properly defined. The light-matter interaction moves from a regime of surface morphology changes to melt and vapour ejection. Inline coherent imaging (ICI), a broadband, spatially-coherent imaging technique, is used to monitor the ablation process. The pulse parameter space is explored and the key regimes are determined. Material removal is observed when the pulse delay is on the order of the pulse duration. ICI is also used to directly observe the ablation process. Melt dynamics are characterized by monitoring surface changes during and after laser processing at several positions in and around the interaction region. Ablation is enhanced when the melt has time to flow back into the hole before the interaction with the second pulse begins. A phenomenological model is developed to understand the relationship between material removal and pulse delay. Based on melt refilling the interaction region, described by logistic growth, and heat loss, described by exponential decay, the model is fit to several datasets. The fit parameters reflect the pulse energies and durations used in the ablation experiments. For pulse durations of 50 us with pulse energies of 7.32 mJ +/- 0.09 mJ, the logisitic growth component of the model reaches half maximum after 8.3 us +/- 1.1 us and the exponential decays with a rate of 64 us +/- 15 us. The phenomenological model offers an interpretation of the material removal process.

THE ELEMENTARY TEACHERS’ PERCEPTIONS OF MOTIVATION FOR AND THE PRINCIPAL’S INFLUENCE ON THEIR ENGAGEMENT IN SELF-DIRECTED PROFESSIONAL DEVELOPMENT

All teachers participate in self-directed professional development (PD) at some point in their careers; however, the degree to which this participation takes place varies greatly from teacher to teacher and is influenced by the leadership of the school principal. The motivation behind why teachers choose to engage in PD is an important construct. Therefore, there is a need for better understanding of the leader’s role with respect to how and why teachers engage in self-directed professional development. The purpose of the research was to explore the elementary teachers’ motivation for and the school principal’s influence on their engagement in self-directed professional development. Three research questions guided this study: 1. What motivates teachers to engage in self-directed professional development? 2. What are the conditions necessary for promoting teachers’ engagement in self-directed professional development? 3. What are teachers’ perceptions of the principal’s role in supporting, fostering, encouraging, and sustaining the professional development of teachers? A qualitative research approach was adopted for this study. Six elementary teachers from one south-eastern Ontario school board, consisting of three novice and three more experienced teachers, provided their responses to a consistent complement of 14 questions. Their responses were documented via individual interviews, transcribed verbatim, and thematically analysed. The findings suggested that, coupled with the individual motivating influences, the culture of the school was found to be a conditional dynamic that either stimulated or dissuaded participation in self-directed PD. The school principal provided an additional catalyst or deterrence via relational disposition. When teachers felt their needs for competency, relatedness, and autonomy were satisfied, the conditions necessary to motivate teachers to engage in PD were fulfilled. A principal who personified the tenets of transformational leadership served to facilitate teachers’ inclinations to take on PD. A leadership style that was collaborative and trustful and allowed for personal autonomy was a dominant foundational piece that was critical for participant participation in self-directed PD. Finally, the principals were found to positively impact school climate by partaking in PD alongside teachers and ensuring there was a shared vision of the school so that teachers could tailor PD to parallel school interests.

Characterization of the Galactic White Dwarf Population in the Next Generation Virgo Cluster Survey

Halo white dwarfs remain one of the least studied stellar populations in the Milky Way because of their faint luminosities. Recent work has uncovered a population of hot white dwarfs which are thought to be remnants of low-mass Population II stars. This thesis uses optical data from the Next Generation Virgo Cluster Survey (NGVS) and ultravoilet data from the GALEX Ultraviolet Virgo Cluster Survey (GUViCS) to select candidates which may belong to this population of recently formed halo white dwarfs. A colour selection was used to separate white dwarfs from QSOs and main-sequence stars. Photometric distances are calculated using model colour-absolute magnitude relations. Proper motions are calculated by using the difference in positions between objects from the Sloan Digital Sky Survey and the NGVS. The proper motions are combined with the calculated photometric distances to calculate tangential velocities, as well as approximate Galactic space velocities. White dwarf candidates are characterized as belonging to either the disk or the halo using a variety of methods, including calculated scale heights (z> 1 kpc), tangential velocities (vt >200 km/s), and their location in (V,U) space. The 20 halo white dwarf candidates which were selected using Galactic space velocities are analyzed, and their colours and temperatures suggest that these objects represent some of the youngest white dwarfs in the Galactic halo.

UPTAKE OF THE PERIODIC HEALTH EXAM AMONG ADULTS WITH INTELLECTUAL AND DEVELOPMENTAL DISABILITIES FROM 2003 TO 2015

Background: Over the past decade, annual heath exams have been de-emphasized for the general population but emphasized for adults with intellectual and developmental disabilities (IDD). The purpose of this project was to determine if there has been an increase in the uptake of the health exam among adults with IDD in Ontario, to what extent, and the effect on the quality of preventive care provided. Methods: Using administrative health data, the proportion of adults (18-64 years old) with IDD who received a health exam (long appointment, general assessment, and “true” health exam), a high value on the primary care quality composite score (PCQS), and a health exam or high PCQS each year was compared to the proportion in a propensity score matched sample of the general population. Negative binomial and segmented negative binomial regression controlling for age and sex were used to determine the relative risk of having a health exam/high PCQS/health exam or PCQS over time. Results: Pre joinpoint, the long appointment and general assessment health exam definitions saw a decrease and the “true” health exam saw an increase in the likelihood of adults having a health exam. Post joinpoint, all health exam definitions saw a decrease in the likelihood of adults having a health exam. Pre joinpoint, all PCQS measures (high PCQS, long appointment or high PCQS, “true” health exam or high PCQS) saw an increase in the likelihood for adults to achieve a high PCQS or high PCQS/have a health exam. Post joinpoint, all PCQS measures saw a decrease in the likelihood for adults to achieve a high PCQS or high PCQS/have a health exam. Achieving a high PCQS was strongly associated with having a health exam regardless of health exam definition or IDD status. Conclusions: Despite the publication of guidelines, only a small proportion of adults with IDD are receiving health exams. This indicates that the publication of guidelines alone was not sufficient to change practice. More targeted measures, such as the implementation of an IDD-specific health exam fee code, should be considered to increase the uptake of the health exam among adults with IDD.

Academic Integrity and Senior Nursing Undergraduate Clinical Practice

Background: Academic integrity (AI) has been defined as the commitment to the values of honesty, trust, fairness, respect, and responsibility with courage in all academic endeavours. The senior years of nursing studies provide an intersection for students to transition to professional roles through student clinical practice. It is essential to understand what predicts senior nursing students’ intention to behave with AI so that efforts can be directed to initiatives focused on strengthening their commitment to behaving with AI. Research Questions: To what extent do students differ on Theory of Planned Behaviour (TPB) variables? What predicts intention to behave with academic integrity among senior nursing students in clinical practice across three different Canadian Schools of Nursing? Method: The TPB framework, an elicitation (n=30) and two pilot studies (n=59, n=29) resulted in the development of a 38 question (41-item) self-report survey (Miron Academic Integrity Nursing Survey—MAINS: α>0.70) that was administered to Year 3 and 4 students (N=339). Three predictor variables (attitude, subjective norm, perceived behavioural control) were measured with students’ intention to behave with AI in clinical. Age, sex, year of study, program stream, students’ understanding of AI policies, and locations where students accessed AI information were also measured. Results: Hierarchical multiple regression analyses revealed that background, site, and TPB variables explained 32.6% of the variance in intention to behave with academic integrity. The TPB variables explained 26.8% of the variance in intention after controlling for background and site variables. In the final model, only the TPB predictor variables were statistically significant with Attitude having the highest beta value (beta=0.35, p<0.001), followed by Subjective Norm (beta=0.21, p<0.001) and Perceived Behavioural Control (beta=0.12, p<0.02). Conclusion: Student attitude is the strongest predictor to intention to behave with AI in clinical practice and efforts to positively influence students’ attitudes need to be a focus for schools, curricula, and clinical educators. Opportunities for future research should include replicating the current study with students enrolled in other professional programs and intervention studies that examine the effectiveness of specific endeavours to promote AI in practice.

Design and Implementation of Tools for STM Studies in UHV and at the Solid-Liquid Interface

This thesis presents details of the design and development of novel tools and instruments for scanning tunneling microscopy (STM), and may be considered as a repository for several years' worth of development work. The author presents design goals and implementations for two microscopes. First, a novel Pan-type STM was built that could be operated in an ambient environment as a liquid-phase STM. Unique features of this microscope include a unibody frame, for increased microscope rigidity, a novel slider component with large Z-range, a unique wiring scheme and damping mechanism, and a removable liquid cell. The microscope exhibits a high level of mechanical isolation at the tunnel junction, and operates excellently as an ambient tool. Experiments in liquid are on-going. Simultaneously, the author worked on designs for a novel low temperature, ultra-high vacuum (LT-UHV) instrument, and these are presented as well. A novel stick-slip vertical coarse approach motor was designed and built. To gauge the performance of the motor, an in situ motion sensing apparatus was implemented, which could measure the step size of the motor to high precision. A new driving circuit for stick-slip inertial motors is also presented, that o ffers improved performance over our previous driving circuit, at a fraction of the cost. The circuit was shown to increase step size performance by 25%. Finally, a horizontal sample stage was implemented in this microscope. The build of this UHV instrument is currently being fi nalized. In conjunction with the above design projects, the author was involved in a collaborative project characterizing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on Au(111) films. STM was used to characterize Au substrate quality, for both commercial substrates and those manufactured via a unique atomic layer deposition (ALD) process by collaborators. Ambient and UHV STM was then also used to characterize the NHC/Au(111) films themselves, and several key properties of these films are discussed. During this study, the author discovered an unexpected surface contaminant, and details of this are also presented. Finally, two models are presented for the nature of the NHC-Au(111) surface interaction based on the observed film properties, and some preliminary theoretical work by collaborators is presented.

Beyond Black and White: The grisaille exterior of the Netherlandish triptych

This thesis is a study of fifteenth- to mid sixteenth-century Netherlandish triptych exteriors, focusing on the so-called ‘grisaille’ technique. During this period, altarpieces produced in the Low Countries were typically constructed in a tripartite format with folding wings. This arrangement created the opportunity for pictorial representations on both sides of the hinged panels. Painters emphasized the distinction between the triptych’s two faces by executing the exteriors in a strikingly more subdued palette than the interiors. Particular iconographic subject matter was favoured for grisailles, which often depict the Annunciation or saints that reflect the triptych’s patronage or intended location. Jan van Eyck was notable for his emphasis on imitating stone statuary and created three important grisailles, one of which would influence triptych exteriors for years to come. Hieronymus Bosch, an artist working at the turn of the sixteenth century, also brought innovation to his grisailles, further expanding the potential of these reduced-palette paintings. This thesis examines the creative process involved in the production of grisailles and compares the underdrawings of triptych exteriors to those of the corresponding polychromatic interiors. In this study, grisailles are situated in their context as part of multifaceted artworks as well as within the broader church environment. New infrared reflectograms were generated using Queen’s OSIRIS infrared camera to document works in Belgium and the Netherlands. While some aspects of underdrawings could indicate that the figure was meant to imitate statuary, this distinction was not directly linked to triptych exteriors and was related instead to efforts at a trompe-l’oeil effect. Such attempts at mimicry can also be found on triptych interiors. Through a close examination of the underdrawing stage of these paintings it appears that this part of the creative process was not distinguished in any significant way from the underdrawings of triptych interiors.

Understanding arsenic mobility and speciation in lake sediments impacted by ore roasting near Giant mine, NWT

The roasting of gold-bearing arsenopyrite at Giant mine (Northwest Territories) between 1949 and 1999 released approximately 20,000 tonnes of toxic arsenic-bearing aerosols in the local aerial environment. Detailed examination of lake sediments, sediment porewaters, surface waters and lake hydrology sampled from three lakes of differing limnological characteristics was conducted in summer and winter conditions. Samples were analyzed for solid and dissolved elemental concentrations, speciation and mineralogy. The three lakes are located less than 5km from the mine roaster, and downwind, based on predominant wind direction. The objective of the study was to assess the controls on the mobility and fate of arsenic in these roaster-impacted subarctic lacustrine environments. Results show that the occurrence of arsenic trioxide in lake sediments coincides with the regional onset of industrial activities. The bulk of arsenic in sediments is contained in the form of secondary sulphide precipitates, with iron oxides hosting a minimal amount of arsenic near the surface-water interface. The presence of geogenic arsenic is likely contained as dilute impurities in common rock-forming minerals, and is not believed to be a significant source of arsenic to sediments, porewaters or lake waters. Furthermore, the well correlated depth-profiles of arsenic, antimony and gold in sediments may help reveal roaster impact. The soluble arsenic trioxide particles contained in sediments act as the primary source of arsenic into porewaters. Dissolved arsenic in reducing porewaters both precipitate as secondary sulphides in situ, and diffuse upwards into the overlying lake waters. Arsenic diffusion out of porewaters, combined with watercourse-driven residence time, are estimated to be the predominant mechanisms controlling arsenic concentrations in overlying lake waters. The sequestration of arsenic from porewaters as sulphide precipitates, in the study lakes, is not an effective process in keeping lake-water arsenic concentrations below guidelines for the protection of the freshwater environment and drinking water. Seasonal impacts on lake geochemistry derive from ice covering lake waters, cutting them off from of atmospheric oxygen, along with the exclusion of solutes from the ice. Such effects are limited in deep lakes but are can be an important factor controlling arsenic precipitation and mobility in ponds.

The differential impact of oxytocin receptor (OXTR) genotypes on the risk of autism spectrum disorder (ASD) and resulting social communication deficits

Background: Autism spectrum disorder (ASD) is multifactorial and is likely the result of complex interactions between multiple environmental and genetic factors. Recently, it has been suggested that each symptom cluster of the disorder, such as poor social communication, may be mediated by different genetic influences. Genes in the oxytocin pathway, which mediates social behaviours in humans, have been studied with single nucleotide polymorphisms (SNPs) in the oxytocin receptor gene (OXTR) being implicated in ASD. This thesis examines the presence of different oxytocin receptor genotypes, and their associations with ASD and resulting social communication deficits. Methods: The relationship between four OXTR variants and ASD was evaluated in 607 ASD simplex (SPX) families. Cases were compared to their unaffected siblings using a conditional logistic approach. Odds ratios and associated 95 percent confidence intervals were obtained. A second sample of 235 individuals with a diagnosis of ASD was examined to evaluate whether these four OXTR variants were associated with social communication scores on the Autism Diagnostic Interview – Revised (ADI-R). Parameter estimates and associated 95 percent confidence intervals were generated using a linear regression approach. Multiple testing issues were addressed using false discovery adjustments. Results: The rs53576 AG genotype was significantly associated with a lower risk of ASD (OR = 0.707, 95% CI: 0.512-0.975). A single genotype (AG) provided by the rs2254298 marker was found to be significantly associated with higher social communication scores (Parameter estimate = 1.833, SE = 0.762, p = 0.0171). This association was also seen in a Caucasian only and mothers as the respondent samples. No association was significant following false discovery rate adjustments. Conclusion: The findings from these studies provide limited support for the role of OXTR SNPs in ASD, especially in social communication skills. The clinical significance of these associations remains unknown, however, it is likely that these associations do not play a role in the severity of symptoms associated with ASD. Rather, they may be important in the appearance of social deficits due to the rs2254298 markers association with enlarged amygdalas.

Mitigating Social Risk in the Extractive Sector: Developing Intercultural Competence as a Tool for Negotiating Western-Indigenous Perspectives within the Undergraduate Mining Engineering Curriculum

Drawing upon critical, communications, and educational theories, this thesis develops a novel framing of the problem of social risk in the extractive sector, as it relates to the building of respectful relationships with indigenous peoples. Building upon Bakhtin’s dialogism, the thesis demonstrates the linkage of this aspect of social risk to professional education, and specifically, to the undergraduate mining engineering curriculum, and develops a framework for the development of skills related to intercultural competence in the education of mining engineers. The knowledge of social risk, as well as the level of intercultural competence, of students in the mining engineering program, is investigated through a mixture of surveys and focus groups – as is the impact of specific learning interventions. One aspect of this investigation is whether development of these attributes alters graduates’ conception of their identity as mining engineers, i.e. the range and scope of responsibilities, and understanding of to whom responsibilities are owed, and their role in building trusting relationships with communities. Survey results demonstrate that student openness to the perspectives of other cultures increases with exposure to the second year curriculum. Students became more knowledgeable about social dimensions of responsible mining, but not about cultural dimensions. Analysis of focus group data shows that students are highly motivated to improve community perspectives and acceptance. It is observed that students want to show respect for diverse peoples and communities where they will work, but they are hampered by their inability to appreciate the viewpoints of people who do not share their values. They embrace benefit sharing and environmental protection as norms, but they mistakenly conclude that opposition to mining is rooted in a lack of education rather than in cultural values. Three, sequential, threshold concepts are identified as impeding development of intercultural competence: Awareness and Acknowledgement of Different Forms of Knowledge; Recognition that Value Systems are a Function of Culture; Respect for varied perceptions of Social Wellbeing and Quality of Life. Future curriculum development in the undergraduate mining engineering program, as well as in other educational programs relevant to the extractive sector, can be effectively targeted by focusing on these threshold concepts.

Essays on Economics of Entrepreneurship

This dissertation examines three important issues. The first issue is about the human capital investment and entrepreneurship as a career choice. The standard human capital theory shows that firms (employees) never invest in general (firm-specific) human capital of the employee as they do not extract any return from it. However, when entrepreneurship is introduced as a career option for an innovative employee, both firm’s and employee’s human capital investments change. Employee starts investing in his firm-specific human capital to increase the probability to innovate (and to become an entrepreneur). However, the firm uses general human capital investment to reduce the risk of employee’s departure. The second issue is regarding the factors motivating entry regulations reforms and the possible nonlinear effects of entry regulation reforms. The current literature and the policy recommendations assume that these reforms have linear effects on entrepreneurship. Nevertheless, the anecdotal evidence shows that the outcomes of such reforms vary greatly from country to country. To investigate this issue, I collect a sample data on entry regulations and firm creation from World Bank. The empirical analysis indicates that the effect of entry regulation reforms depends on the pre-reform level of bureaucracy in the country. More specifically, while low-bureaucracy countries benefit from entry regulation reforms, high-bureaucracy countries do not benefit. Moreover, the probability of making a reform increases if the country has reformist neighbors, cumbersome entry regulations, high unemployment rate, or low corruption level. The last issue is related to the individual and joint effects of bureaucracy and corruption on different types of entrepreneurs. The current literature investigates these effects only on unified measures of entrepreneurship. However, entrepreneurs are very different in many senses. To address this issue, I collect the necessity-based and opportunity-based entrepreneurship data from Global Entrepreneurship Monitor. The empirical analysis yield two important results: First, bureaucracy has a direct negative (positive) effect on necessity-based (opportunity-based) entrepreneurs. Second, corruption mitigates the effect of bureaucracy for both groups of entrepreneurs. All three chapters offer useful insights and important implications to academics and policymakers.

Fiber-optic vibration sensing of cantilevers immersed in fluids

An all fiber-optical method to monitor densities and viscosities of liquids utilizing a steel cantilever (4 x 0.3 x 0.08 cm3) is presented. The actuation is performed by photothermally heating the cantilever at its base with an intensity-modulated 808 nm diode laser. The cantilever vibrations are picked up by an in-fiber Fabry Perot cavity sensor attached along the length of the cantilever. The fluid properties can be related to the resonance characteristics of the cantilever, e.g. a shift in the resonance frequency corresponds to a change in fluid density, and the width of the resonance peak gives information on the dynamic viscosity after calibration of the system. Aqueous glycerol, sucrose and ethanol samples in the range of 0.79–1.32 gcm−3 (density) and 0.89–702 mPas (viscosity) were used to investigate the limits of the sensor. A good agreement with literature values could be found with an average deviation of around 10 % for the dynamic viscosities, and 5–16 % for the mass densities. A variety of clear and opaque commercial spirits and an unknown viscous sample, e.g. home-made maple syrup, were analyzed and compared to literature values. The unique detection mechanism allows for the characterization of opaque samples and is superior to conventional microcantilever sensors. The method is expected to be beneficial in various industrial sectors such as quality control of food samples.

The Causes and Effects of Consumer Competence Perceptions

Consumers are constantly making consumption decisions and engaging in marketplace activities that require some level of competence. In other words, consumers possess and require some knowledge, skills, and abilities to engage in the marketplace and obtain what they want. But what causes consumers to infer they are or are not competent? And, what are the consequences of these competence inferences on consumer behaviour? This dissertation examines the role consumption plays in consumers’ inferences of their own competence to enhance our understanding of these issues. By integrating the literature on competence and attributions of blame, this dissertation develops a theory for when and how consumption influences self-perceptions of competence and how these self-perceptions of competence impact future consumer behaviours. Evidence from five studies suggests that consumers infer their own competence from their consumption outcomes, despite who is actually responsible for causing these outcomes. This means consumers potentially see themselves as incompetent for negative outcomes that are entirely firm-caused. This dissertation argues that people infer their own competence from firm-caused outcomes because they conflate their decisions made prior to an outcome with the cause of that outcome. This dissertation also examines how these variations in self-perceptions of competence can influence future consumer behaviours.

The Capital Sculpture of Wells Cathedral, c. 1184-1210

The understudied capital sculpture of Wells Cathedral in Somerset, England (c. 1184-1210) provides ample opportunity of expanding the current scholarship and understanding of interior ecclesiastical sculpture in a West Country cathedral. While the Gothic style of architecture is typically understood as, according to Paul Binski (2014), rational in execution and reception, the capital sculpture at Wells Cathedral has been considered illogical in terms of both its iconography and location within the nave, transepts, and north porch. Utilizing Michael Camille’s post/anti-iconographical approach, this project examines the Wells figural capitals in five case studies: labour, Old and New Testament Scenes, animals and beast fables, busts, and monsters and hybrids. Each group of capitals will be approached with an understanding that this type of art was viewed by people of different classes and professions, with each viewer bringing their own personal experiences and abilities into how they could have read and understood these types of images. Therefore, the capitals at Wells must be read through layers of meaning and interpretation while also considering their locations within the cathedral and how they react and respond to surrounding figural capitals.