A reindustrialização de Portugal num contexto de crise e hegemonia industrial dos países emergentes

O presente estudo teve como motivação compreender a importância e o papel da indústria para a retoma do crescimento económico de Portugal, integrado num contexto de desindustrialização progressiva nos últimos anos, e a um crescimento da importância e domínio de sectores de produção por parte de países emergentes, associado à crise surgida em 2008. Pretendeu-se enquadrar a problemática a nível nacional e europeu, contextualizando a indústria nacional, apontando as principais causas da desindustrialização e as suas consequências. Identificar os principais actores-chave e a sua participação no processo de reindustrialização. Identificar políticas e instrumentos de fomento da reindustrialização e principais conclusões.

Implementation of membrane processes for improvement of the detection of food contaminants

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities (http://www.em3e.eu)

Estudo e sugestões de melhorias de eficiência energética numa empresa do sector industrial de carnes

Desta dissertação resultou uma análise ao consumo energético associado aos produtos mais comerci-alizados por uma Empresa, inserida no sector industrial de carnes, e de respectivas medidas de ges-tão de energia eléctrica e de implementação de tecnologia térmica para optimizara a eficiência ener-gética da instalação. A avaliação realizada nesta dissertação permitiu identificar os processos que mais energia consomem, nomeadamente todos os produtos que envolvem a fumagem. Com base nes-tes resultados a empresa pode identificar as prioridades em termos de redução e melhoria da eficiên-cia energética. O estudo de gestão da energia eléctrica permitiu concluir que é mais proveitoso man-ter em funcionamento os processos pontuais durante os períodos nocturnos ou durante o fim-de-semana, permitindo, no segundo caso, obter uma poupança de 16% nos custos associados de cada vez que se colocar a linha de produção de peito de peru fumado entre o período semanal para o perí-odo entre sexta-feira e domingo, visto ser a linha de produção estudada que mais energia eléctrica consome. Na análise de pré-aquecimento dos fluidos utilizados na empresa através de recuperadores de calor, concluiu-se que é mais benéfico pré-aquecer a água utilizada para o processo de fumagem, visto obter-se uma poupança económica de 6 € e 11,8 m3 de gás natural por aplicação, ou seja, de cada vez que é utilizada água pré-aquecida através deste procedimento, tendo-se obtido valores de poupança energética entre 24 e 60% para os vários fluidos estudados.

Ferramenta de simulação para robô industrial

Actualmente, os meios de produção industrial estão em constante desenvolvimento, de forma a corresponderem a um mercado cada vez mais globalizado, caracterizado por uma forte competição, uma pressão na redução de custos, e a existência de produtos e serviços personalizados. Entretanto, ao nível de equipamento de robótica, também se tem notado esta pressão por parte do mercado, exigindo-se equipamento com uma complexidade crescente, tanto ao nível da sua morfologia, do seu controlo e da sua utilização. Ao nível da sua utilização, tornou-se então necessário adoptar abordagens que permitam um maior controlo quanto a falhas de manuseamento e respectiva modelação destes robôs. Uma destas abordagens é a simulação. A simulação é uma das áreas com maior crescimento a nível tecnológico, sendo utilizada em várias áreas de tecnologia e informação devido à sua capacidade de adaptação, tornando-se numa área bastante dinâmica e flexível. Dentro dum contexto de robôs industriais, as aplicações mais típicas consistem na programação “offline” de robôs e na aprendizagem de robótica, tendo como objectivo estudar e analisar os comportamentos de determinados sistemas, com o intuito de reduzir a necessidade de intervenção humana em tarefas repetitivas, perigosas e dispendiosas. Além disso, a simulação está também presente na computação informática nas salas de aulas, por forma a auxiliar o professor. Foi então idealizado um sistema de simulação capaz de imitar um robô industrial em que os alunos terão que conseguir controlar, para que os vários testes sejam primeiramente implementados no simulador, diminuindo assim, o risco de causar acidentes no seu congênere real durante a fase de testes. O sistema consiste numa interface em que possibilita ao utilizador fazer um controlo manual do robô simulado, assim como ser capaz de o controlar por comandos requisitados por uma aplicação exterior através de serviços WEB, permitindo assim, a simulação de vários testes no robô industrial em causa.

Auditoria energética e aplicação de medidas de eficiência energética a uma instalação industrial do sector farmacêutico

A evolução das sociedades encontra-se assente num aumento dos consumos de energia, de origem fóssil sobretudo. Países com escassos recursos neste tipo de fontes de energia, encontram-se energeticamente dependentes face ao exterior, como é o caso de Portugal. Torna-se uma questão chave, a forma como a energia é utilizada, sendo o processo de auditorias energéticas uma ferramenta essencial para o efeito. Uma auditoria energética, é uma análise as condições de utilização de energia, com vista a identificação de oportunidades de racionalização do consumo de energia. Esta dissertação tem como caso de estudo a realização de uma auditoria energética e avaliação de medidas de eficiência energética a uma instalação industrial do sector farmacêutico, que no ano civil de 2014 apresentou um consumo global de 682 tep e ao abrigo do Decreto-Lei n.˚68-A/2015 de 30 de abril, encontra-se na obrigatoriedade de efetuar uma auditoria energética, que incida sobre as condições de utilização de energia. Nas medidas de eficiência energética avaliadas, que tiveram como suporte os resultados com a realização da auditoria energética, avaliou-se o potencial em termos económicos e ambientais, que de entre 4 medidas avaliadas destaca-se o estudo de viabilidade para implementação de uma central de trigeração.

Chlorite Dismutase from perchlorate reducing bacteria. A potential biocatalyst to eliminate chlorinated species from polluted water resources and industrial wastes

Magnetospirillum (M.) sp. strain Lusitani, a perchlorate reducing bacteria (PRB), was previously isolated from a wastewater treatment plant and phylogenetic analysis was performed to classify the isolate. The DNA sequence of the genes responsible for perchlorate reduction and chlorite dismutation was determined and a model was designed based on the physiological roles of the proteins involved in the pcr-cld regulon. Chlorite dismutase (Cld) was purified from Magnetospirillum sp. strain Lusitani cells grown in anaerobiosis in the presence of perchlorate. The protein was purified up to electrophoretic grade using HPLC techniques as a 140 kDa homopentamer comprising five ~28 kDa monomers. Steady-state kinetic studies showed that the enzyme follows a Michaelis-Menten model with optimal pH and temperature of 6.0 and 5°C, respectively. The average values for the kinetic constants KM and Vmax were respectively 0.56 mM and 10.2 U, which correspond to a specific activity of 35470 U/mg and a turnover number of 16552 s-1. Cld from M. sp. strain Lusitani is inhibited by the product chloride, but not by dioxygen. Inhibition constants KiC= 460 mM and KiU= 480 mM indicated that sodium chloride is a weak mixed inhibitor of Cld, with a slightly stronger competitive character. The X-ray crystallography structure of M. sp. strain Lusitani Cld was solved at 3.0 Å resolution. In agreement with cofactor content biochemical analysis, the X-ray data showed that each Cld monomer harbors one heme b coordinated by a histidine residue (His188), hydrogen-bonded to a conserved glutamic acid residue (Glu238). The conserved neighboring arginine residue (Arg201) important for substrate positioning, was found in two different conformations in different monomers depending on the presence of the exogenous ligand thiocyanate. UV-Visible and CW-EPR spectroscopies were used to study the effect of redox agents, pH and exogenous ligands on the heme environment.

Produtos têxteis inteligentes incorporando filamentos compósitos com nanotubos de carbono

Programa Doutoral em Engenharia Têxtil.

An agent-based model to assess the attractiveness of industrial estates

This article describes the main approaches adopted in a study focused on planning industrial estates on a sub-regional scale. The study was supported by an agent-based model, using firms as agents to assess the attractiveness of industrial estates. The simulation was made by the NetLogo toolkit and the environment represents a geographical space. Three scenarios and four hypotheses were used in the simulation to test the impact of different policies on the attractiveness of industrial estates. Policies were distinguished by the level of municipal coordination at which they were implemented and by the type of intervention. In the model, the attractiveness of industrial estates was based on the level of facilities, amenities, accessibility and on the price of land in each industrial estate. Firms are able to move and relocate whenever they find an attractive estate. The relocating firms were selected by their size, location and distance to an industrial estate. Results show that a coordinated policy among municipalities is the most efficient policy to promote advanced-qualified estates. In these scenarios, it was observed that more industrial estates became attractive, more firms were relocated and more vacant lots were occupied. Furthermore, the results also indicate that the promotion of widespread industrial estates with poor-quality infrastructures and amenities is an inefficient policy to attract firms.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Industrial engineering and management curriculum profile: Developing a framework of competences

This paper presents a framework of competences developed for Industrial Engineering and Management that can be used as a tool for curriculum analysis and design, including the teaching and learning processes as well as the alignment of the curriculum with the professional profile. The framework was applied to the Industrial Engineering and Management program at University of Minho (UMinho), Portugal, and it provides an overview of the connection between IEM knowledge areas and the competences defined in its curriculum. The framework of competences was developed through a process of analysis using a combination of methods and sources for data collection. The framework was developed according to four main steps: 1) characterization of IEM knowledge areas; 2) definition of IEM competences; 3) survey; 4) application of the framework at the IEM curriculum. The findings showed that the framework is useful to build an integrated vision of the curriculum. The most visible aspect in the learning outcomes of IEM program is the lack of balance between technical and transversal competences. There was not almost any reference to the transversal competences and it is fundamentally concentrated on Project-Based Learning courses. The framework presented in this paper provides a contribution to the definition of IEM professional profile through a set of competences which need to be explored further. In addition, it may be a relevant tool for IEM curriculum analysis and a contribution for bridging the gap between universities and companies.

Towards effective control of P2P traffic aggregates in network infrastructures

Nowadays, many P2P applications proliferate in the Internet. The attractiveness of many of these systems relies on the collaborative approach used to exchange large resources without the dependence and associated constraints of centralized approaches where a single server is responsible to handle all the requests from the clients. As consequence, some P2P systems are also interesting and cost-effective approaches to be adopted by content-providers and other Internet players. However, there are several coexistence problems between P2P applications and In- ternet Service Providers (ISPs) due to the unforeseeable behavior of P2P traffic aggregates in ISP infrastructures. In this context, this work proposes a collaborative P2P/ISP system able to underpin the development of novel Traffic Engi- neering (TE) mechanisms contributing for a better coexistence between P2P applications and ISPs. Using the devised system, two TE methods are described being able to estimate and control the impact of P2P traffic aggregates on the ISP network links. One of the TE methods allows that ISP administrators are able to foresee the expected impact that a given P2P swarm will have in the underlying network infrastructure. The other TE method enables the definition of ISP friendly P2P topologies, where specific network links are protected from P2P traffic. As result, the proposed system and associated mechanisms will contribute for improved ISP resource management tasks and to foster the deployment of innovative ISP-friendly systems.

Automated network resilience optimization using computational intelligence methods

This paper presents an automated optimization framework able to provide network administrators with resilient routing configurations for link-state protocols, such as OSPF or IS-IS. In order to deal with the formulated NP-hard optimization problems, the devised framework is underpinned by the use of computational in- telligence optimization engines, such as Multi-objective Evolutionary Algorithms (MOEAs). With the objective of demonstrating the framework capabilities, two il- lustrative Traffic Engineering methods are described, allowing to attain routing con- figurations robust to changes in the traffic demands and maintaining the network stable even in the presence of link failure events. The presented illustrative results clearly corroborate the usefulness of the proposed automated framework along with the devised optimization methods.

Associations between energetic expenditure, physical activity and body composition: exploratory study with industrial workers

This study, which involved a target population comprised by 292 workers of different industrial areas (metalmechanics, foundry, chemical, wood, food), aimed to verify the association between energy expenditure-EE, physical activity level-PAL and body composition (Body Mass Index-BMI, Waist-Hip Ratio-WHR and Waist To Height Ratio, WTHR) of participants. The work was completed with the description of the variables relating to the gender of the individuals (male and female) and the activities carried out in the two sectors of industrial work (administrative sector and productive sector). In this research, the statistical technique of principal components analysis (PCA) and the hierarchical analysis of clusters (HCA) were used. Sociodemographic and anthropometric data were collected as well as the level of physical activity and energy expenditure were assessed. The vast majority of individuals who spend greater energy expenditure and has more intense physical activity were male. Most of these workers are in the production sector. We can confirm that that both, gender and labor activity, are factors that have influence on the EE and the PAL.

Nutritional status and food intake at workplace as health indicators for industrial workers

This study aimed to verify the correlation among the nutritional composition of the food consumed in the work environment, the energy expenditure and the nutritional status of workers from different sectors (administration and production) in different industries. The anthropometric data, in addition to the energy expenditure and food intake at lunch were evaluated for 292 workers, all of them included in the Brazilian Worker Food Program (also called PAT). The food consumption was assessed from the direct observation of the meal, for five consecutive days. The obtained data were analyzed by Pearson correlation test and by a Principal Components Analysis. Prevalence of overweight was detected in the studied population, according to the Body Mass Index (BMI). A statistically significant difference was found in terms of the energy expenditure of physical activity and daily energy expenditure in relation to gender and the working sector. The obtained results indicate that there is significant positive correlation (p < 0.01) between the following variables: body weight and BMI (r = 0.84), weight and daily energy expenditure (DEE) (r = 0.52), BMI and DEE (r = 0.27), DEE and energy (r = 0.38), and energy and lipid intake (r = 0.50). These findings seems to indicate the importance of ensuring an adequate balance of nutrients at meals, due to the heterogeneity of workers, in particular in the case of those workers who perform tasks or functions requiring less energy expenditure.

Modeling microbes: New methods for integrated metabolic and regulatory network reconstruction

PhD Thesis in Bioengineering