Multiscale modelling of dendrite growth during vacuum arc remelting

Vacuum Arc Remelting (VAR) is the accepted method for producing homogeneous, fine microstructures that are free of inclusions required for rotating grade applications. However, as ingot sizes are increasing INCONEL 718 becomes increasingly susceptible to defects such as freckles, tree rings, and white spots increases for large diameter billets. Therefore, predictive models of these defects are required to allow optimization of process parameters. In this paper, a multiscale and multi-physics model is presented to predict the development of microstructures in the VAR ingot during solidification. At the microscale, a combined stochastic nucleation approach and finite difference solution of the solute diffusion is applied in the semi-solid zone of the VAR ingot. The micromodel is coupled with a solution of the macroscale heat transfer, fluid flow and electromagnetism in the VAR process through the temperature, pressure and fluid flow fields. The main objective of this study is to achieve a better understanding of the formation of the defects in VAR by quantifying the influence of VAR processing parameters on grain nucleation and dendrite growth. In particular, the effect of different ingot growth velocities on the microstructure formation was investigated. It was found that reducing the velocity produces significantly more coarse grains.

Increasing research evidence in practice: a possible role for the consultant nurse

Aims: To determine the extent to which clinical nursing practice has adopted research evidence. To identify barriers to the application of research findings in practice and to propose ways of overcoming these barriers. Background: Way back in 1976, nursing and midwifery practice started adopting research evidence. By 1990s, there was some transparency of research evidence in practice, but more could have been done to widen its adoption. Many barriers were identified which could hinder implementation of the evidence in practice, and the effort to remove these remains weak. Evaluation: 25 research articles from across Europe and America were selected, and scrutinized, and recommendations analysed. Findings: Many clinical practitioners report a lack of time, ability and motivation to appraise research reports and adopt findings in practice. The clinical environment was not seen as research friendly as there were a general lack of research activities and facilities locally. There was a clear lack of research leadership in practice. Implication for nursing management: This paper reviewed the research evidence from several published research papers and provides consultant nurses with practical suggestions on how to enhance research evidence application in their practice. It recommends how consultant nurses can make their practice more research transparent by providing the required leadership, creating a research-friendly organization, developing a clear research agenda and facilitating staff develop a local research framework for reading research and implementing research evidence in their practice.

Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing

Gas-solids two phase systems are widely employed within process plant in the form of pneumatic conveyors, dust extraction systems and solid fuel injection systems. The measurement of solids phase velocity therefore has wide potential application in flow monitoring and, in conjunction with density measurement instrumentation, solids mass flow rate measurement. Historically, a number of authors have detailed possible measurement techniques, and some have published limited test results. It is, however, apparent that none of these technologies have found wide application in industry. Solids phase velocity measurements were undertaken using real time cross correlation of signals from two electrostatic sensors spaced axially along a pipeline conveying pulverised coal (PF). Details of the measurement equipment, the pilot scale test rig and the test results are presented.

Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows

The measurement of particle velocities in two-phase gas-solid systems has a wide application in flow monitoring in process plant, where two-phase gas-solids systems are frequently employed in the form of pneumatic conveyors and solid fuel injection systems. Such measurements have proved to be difficult to make reliably in industrial environments. This paper details particle velocity measurements made in a two phase gas-solid now utilising a laser Doppler velocimetry system. Tests were carried out using both wheat flour and pulverised coal as the solids phase, with air being used as the gaseous phase throughout. A pipeline of circular section, having a diameter of 53 mm was used for the test work, with air velocities ranging from 25 to 45 m/s and suspension densities ranging from 0.001 kg to 1 kg of solids per cubic meter of air. Details of both the test equipment used, and the results of the measurements are presented.

Velocity measurement of pneumatically conveyed solids using electrodynamic sensors

Theoretical and experimental studies of cross correlation techniques applied to non-restrictive velocity measurement of pneumatically conveyed solids using ring-shaped electrodynamic flow sensors are presented. In-depth studies of the electrodynamic sensing mechanism, and also of the spatial sensitivity and spatial filtering properties of the sensor are included, together with their relationships to measurement accuracy and the effects of solids' velocity profiles. The experimental evaluation of a 53 mm bore sensing head is described, including trials using a calibrated pneumatic conveyor circulating pulverized fuel and cement. Comparisons of test results with the mathematical models of the sensor are used to identify important aspects of the instrument design. Off-line test results obtained using gravity-fed solids flow show that the system repeatability is within +/-0.5% over the velocity range of 2-4 m s(-1) for volumetric concentrations of solids no greater than 0.2%. Results obtained in the pilot-plant trials demonstrate that the system is capable of achieving repeatability better than +/-2% and linearity within +/-2% over the velocity range 20-40 m s(-1) for volumetric concentrations of solids in the range 0.01-0.44%.

Modelling the vertical distribution of eggs of anchovy (Engraulis encrasicolus) and sardine (Sardina pilchardus)

Measurements were made of the density and settling velocity of eggs of sardine (Sardina pilchardus) and anchovy (Engraulis encrasicolus), using a density-gradient column. These results were related to observed vertical distributions of eggs obtained from stratified vertical distribution sampling in the Bay of Biscay. Eggs of both species had slightly positive buoyancy in local seawater throughout most of their development until near hatching, when there was a marked increase in density and they became negatively buoyant. The settling velocity of anchovy eggs, which are shaped as prolate ellipsoids, was close to predictions for spherical particles of equivalent volume. An improved model was developed for prediction of the settling velocity of sardine eggs, which are spherical with a relatively large perivitelline volume; this incorporated permeability of the chorion and adjustment of the density of the perivitelline fluid to ambient seawater. Eggs of both species were located mostly in the top 20 m of the water column, in increasing abundance towards the surface. A sub-surface peak of egg abundance was sometimes observed at the pycnocline, particularly where this was pronounced and associated with a low-salinity surface layer. There was a progressive deepening of the depth distributions for successive stages of egg development. Results from this study can be applied for improved plankton sampling of sardine and anchovy eggs and in modelling studies of their vertical distribution.

Buoyancy measurements and vertical distribution of eggs of sardine (Sardina pilchardus) and anchovy (Engraulis encrasicolus)

Measurements were made of the density and settling velocity of eggs of sardine (Sardina pilchardus) and anchovy (Engraulis encrasicolus), using a density-gradient column. These results were related to observed vertical distributions of eggs obtained from stratified vertical distribution sampling in the Bay of Biscay. Eggs of both species had slightly positive buoyancy in local seawater throughout most of their development until near hatching, when there was a marked increase in density and they became negatively buoyant. The settling velocity of anchovy eggs, which are shaped as prolate ellipsoids, was close to predictions for spherical particles of equivalent volume. An improved model was developed for prediction of the settling velocity of sardine eggs, which are spherical with a relatively large perivitelline volume; this incorporated permeability of the chorion and adjustment of the density of the perivitelline fluid to ambient seawater. Eggs of both species were located mostly in the top 20 m of the water column, in increasing abundance towards the surface. A sub-surface peak of egg abundance was sometimes observed at the pycnocline, particularly where this was pronounced and associated with a low-salinity surface layer. There was a progressive deepening of the depth distributions for successive stages of egg development. Results from this study can be applied for improved plankton sampling of sardine and anchovy eggs and in modelling studies of their vertical distribution.

Increasing prevalence of the marine cladoceran Penilia avirostris (Dana, 1852) in the North Sea

Rising sea surface temperatures in the North Sea have had consequential effects on not only indigenous plankton species, but also on the possibility of successful colonisation of the area by invasive plankton species. Previous studies have noted the introduction and integration into the plankton community of various phytoplankton species, but establishment of zooplankton organisms in the North Sea is less well-documented. Examining continuous plankton recorder (CPR) survey data and zooplankton results from the Helgoland Roads study, the autumn of 1999 witnessed the occurrence of the marine cladoceran Penilia avirostris in large numbers in the North Sea. The rapid appearance of the species corresponded with exceptionally warm sea surface temperatures (SSTs). Since 1999, the species has become a regular feature of the autumnal zooplankton community of the North Sea. In 2002 and 2003, the species occurred in greater abundance than recorded before. It is suggested that increased autumn SSTs have proved favourable to P. avirostris, with warmer conditions contributing to the success of the species’ resting eggs and aiding colonisation.