Forcing of self-excited round jet diffusion flames

In this experimental and numerical study, two types of round jet are examined under acoustic forcing. The first is a non-reacting low density jet (density ratio 0.14). The second is a buoyant jet diffusion flame at a Reynolds number of 1100 (density ratio of unburnt fluids 0.5). Both jets have regions of strong absolute instability at their base and this causes them to exhibit strong self-excited bulging oscillations at welldefined natural frequencies. This study particularly focuses on the heat release of the jet diffusion flame, which oscillates at the same natural frequency as the bulging mode, due to the absolutely unstable shear layer just outside the flame. The jets are forced at several amplitudes around their natural frequencies. In the non-reacting jet, the frequency of the bulging oscillation locks into the forcing frequency relatively easily. In the jet diffusion flame, however, very large forcing amplitudes are required to make the heat release lock into the forcing frequency. Even at these high forcing amplitudes, the natural mode takes over again from the forced mode in the downstream region of the flow, where the perturbation is beginning to saturate non-linearly and where the heat release is high. This raises the possibility that, in a flame with large regions of absolute instability, the strong natural mode could saturate before the forced mode, weakening the coupling between heat release and incident pressure perturbations, hence weakening the feedback loop that causes combustion instability. © 2009 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Les attributs et contextes d'utilisation du travail collaboratif

Résumé: Le travail collaboratif s’invite à présent partout, et est identifié dans des domaines aussi multiples que variés. Dans le monde de l’entreprise, de la prise en charge médico-sociale, de l’éducation / formation, de la recherche, de l’économie, de la politique, de la gestion de carrière… etc. Ce travail vise dans un premier temps à décliner ce qu’est la collaboration, ses caractéristiques, ses contextes d’utilisation, et la façon dont elle se différencie des autres formes d’organisation (coopération et compétition notamment). Dans un deuxième temps, il réexamine la question de la nouveauté du travail collaboratif à la lumière des résultats obtenus. S’il est assez évident que les « ingrédients », les attributs du travail collaboratif ne sont pas nouveaux (le développement informatique mis à part), il semble en revanche que les combinaisons rencontrées et les domaines d’application génèrent de nouvelles questions. Pour finir, en s’inspirant des termes associés à collaboration, il considère quelques-uns des nouveaux enjeux dans la sphère professionnelle.

Entre Syrie et Mésopotamie : vases zoomorphes du Règne de Mittani

Abstract: The Mittanian zoomorphic vessels from Nuzi, Tell Brak, Tell al-Rimah and other sites allow the creation of a significant database for analysis based on typological criteria as well as spatial distribution. This class of materials is attested in several areas of the ancient Near East from the Late Calcholitic and still produced until the Mittanian age and thereafter. Most of the finds come from temples or domestic contexts and they can be now securely dated, while their spatial distribution can be properly investigated. Lion representations seem to predominate, but pigs and other animals appear as well. The exact function and meaning of these vessels are difficult to ascertain, nevertheless, in most cases, they are probably related to cultic practices performed throughout the Mittanian Empire.

La precarite de l’emploi et ses multiples impacts a la lumière du genre

Résumé: A l’heure où l’on évoque une “génération précaire” il est intéressant de s’interroger sur l’accroissement de la précarité de l’emploi en France et d’étudier ses éventuels effets sur les salariés. L’objectif de la présente recherche était d’observer les impacts causés par la précarité de l’emploi sur une population de référence et voir si ces effets différaient selon le sexe du salarié soumis à la précarité. Pour ce faire, nous avons soumis un questionnaire à deux groupes de travailleurs. Ce dernier portait sur la précarité de l’emploi et ses impacts en termes de stress, consommation de substances et impacts sur la sphère privée. Les résultats font apparaître des effets significatifs et des tendances qui existent sur certaines des dimensions interrogées (stress et consommation) entre le groupe de travailleurs précaires et non précaires. De plus, des effets entre hommes et femmes ont également été relevés. Par contre, nous n’avons pas d’effets observés sur la sphère privée de l’individu. Suite à l’absence d’effet constaté nous interrogeons la spécificité de la population. Aussi, nous envisageons de prolonger cette étude sur la recherche d’indicateurs concernant la précarité enseignante. Mots clés: précarité professionnelle, précarité du travail, précarité de l’emploi, travailleurs précaires, inégalités hommes femmes, stress, substances addictives, impact vie hors travail

Observation Of Diffusion Process Of A Water Droplet Immersed In Protein Solution In Microgravity

Pure liquid - liquid diffusion driven by concentration gradients is hard to study in a normal gravity environment since convection and sedimentation also contribute to the mass transfer process. We employ a Mach - Zehnder interferometer to monitor the mass transfer process of a water droplet in EAFP protein solution under microgravity condition provided by the Satellite Shi Jian No 8. A series of the evolution charts of mass distribution during the diffusion process of the liquid droplet are presented and the relevant diffusion coefficient is determined.

La souffrance émotionnelle des personnels d’intervention : résultats préliminaires de l’étude sur la santé et la qualité de vie au travail dans les métiers du secteur de l’aide et du soin à domicile

Resumen: La prolongación de la edad y el aumento de la expectativa de vida han hecho surgir nuevas necesidades de atención para las personas ancianas y ello ha inducido a la ampliación de las prestaciones de servicios a domicilio. En este sentido, el trabajo de estos profesionales de intervención a domicilio, así como sus misiones, están en plena mutación. Es un sector con dificultades, debido a la dificultad de reclutar un personal especializado y al absentismo inquietante. Después de un análisis sobre el estado de este sector de la profesión en el que se establece la diferencia entre el enfoque físico y el psicológico sobre la salud, nuestra reflexión se centra en los riesgos psicosociales de esta población de profesionales. Se presentan los resultados preliminares de la investigación realizada con una muestra de 38 personas que ejercían laboralmente en este sector. Emerge la expresión de un sufrimiento emocional, en la que el aislamiento de los participantes es uno de los factores que caracterizan los oficios identificados con una fuerte dimensión relacional con personas vulnerables. La dimensión asistencial del trabajo se presenta como fuente de satisfacción del oficio pero, a su vez, puede conducir a una dificultad de gestionar acontecimientos no previstos

Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding between Cu and Al

Molecular dynamics (MD) simulations are carried out to analyze the diffusion bonding at Cu/Al interfaces. The results indicate that the thickness of the interfacial layer is temperature-dependent, with higher temperatures yielding larger thicknesses. At temperatures below 750 K, the interface thickness is found to increase in a stepwise manner as a function of time. At temperatures above 750 K, the thickness increases rapidly and smoothly. When surface roughness is present, the bonding process consists of three stages. In the first stage, surfaces deform under stress, resulting in increased contact areas. The second stage involves significant plastic deformation at the interface as temperature increases, resulting in the disappearance of interstices and full contact of the surface pair. The last stage entails the diffusion of atoms under constant temperature. The bonded specimens show tensile strengths reaching 88% of the ideal Cu/Al contact strength. (c) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Diffusion dominated process for the crystal growth of a binary alloy

The pure diffusion process has been often used to study the crystal growth of a binary alloy in the microgravity environment. In the present paper, a geometric parameter, the ratio of the maximum deviation distance of curved solidification and melting interfaces from the plane to the radius of the crystal rod, was adopted as a small parameter, and the analytical solution was obtained based on the perturbation theory. The radial segregation of a diffusion dominated process was obtained for cases of arbitrary Peclet number in a region of finite extension with both a curved solidification interface and a curved melting interface. Two types of boundary conditions at the melting interface were analyzed. Some special cases such as infinite extension in the longitudinal direction and special range of Peclet number were reduced from the general solution and discussed in detail.

Numerical simulation of hypersonic viscous flow around space shuttle with method of diffusion analogy

Hypersonic viscous flow around a space shuttle with M(infinity) = 7, Re = 148000 and angle of attack alpha = 5-degrees is simulated numerically with the special Jacobian matrix splitting technique and simplified diffusion analogy method. With the simplified diffusion analogy method the efficiency of computation and resolution of the shock can be improved.

A perturbational h4 exponential finite-difference scheme for the convective diffusion equation

A perturbational h4 compact exponential finite difference scheme with diagonally dominant coefficient matrix and upwind effect is developed for the convective diffusion equation. Perturbations of second order are exerted on the convective coefficients and source term of an h2 exponential finite difference scheme proposed in this paper based on a transformation to eliminate the upwind effect of the convective diffusion equation. Four numerical examples including one- to three-dimensional model equations of fluid flow and a problem of natural convective heat transfer are given to illustrate the excellent behavior of the present exponential schemes, the h4 accuracy of the perturbational scheme is verified using double precision arithmetic.

H4 exponential finite-difference scheme for convective diffusion-equations

Perturbations are applied to the convective coefficients and source term of a convection-diffusion equation so that second-order corrections may be applied to a second-order exponential scheme. The basic Structure of the equations in the resulting fourth-order scheme is identical to that for the second order. Furthermore, the calculations are quite simple as the second-order corrections may be obtained in a single pass using a second-order scheme. For one to three dimensions, the fourth-order exponential scheme is unconditionally stable. As examples, the method is applied to Burgers' and other fluid mechanics problems. Compared with schemes normally used, the accuracies are found to be good and the method is applicable to regions with large gradients.

Diffusion analogy and shock capturing for solving aerodynamic equations

Improving the resolution of the shock is one of the most important subjects in computational aerodynamics. In this paper the behaviour of the solutions near the shock is discussed and the reason of the oscillation production is investigated heuristically. According to the differential approximation of the difference scheme the so-called diffusion analogy equation and the diffusion analogy coefficient are defined. Four methods for improving the resolution of the shock are presented using the concept of diffusion analogy.

Diffusion sliding rate in the binary gaseous mixture

radiation incident upon a test cell filled with gaseous SF6 has

Viandar de Sota: Dibersifikazioak kontrolatu edo areagotu egiten du enpresa-arriskua?

Duración (en horas): De 11 a 20 horas. Nivel educativo: Grado