Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Metodologia de projeto de turbinas eólicas de pequeno porte.

O potencial eólico do Brasil, de vento firme e com viabilidade econômica de aproveitamento, é de 143 GW. Isso equivale ao dobro de toda a capacidade da geração já instalada no país. No Brasil, a energia eólica tem uma sazonalidade complementar à energia hidrelétrica, porque os períodos de melhor condição de vento coincidem com os de menor capacidade dos reservatórios. O projeto desenvolvido neste trabalho nasceu de uma chamada pública do FINEP, e sob os auspícios do recém criado CEPER. Ao projeto foi incorporado um caráter investigativo, de contribuição científica original, resultando em um produto de tecnologia inovadora para aerogeradores de baixa potência. Dentre os objetivos do projeto, destacamos a avaliação experimental de turbinas eólicas de 5000 W de potência. Mais especificamente, dentro do objetivo geral deste projeto estão incluídas análise estrutural, análise aerodinâmica e análise de viabilidade de novos materiais a serem empregados. Para cada uma das diferentes áreas de conhecimento que compõem o projeto, será adotada a metodologia mais adequada. Para a Análise aerodinâmica foi realizada uma simulação numérica preliminar seguida de ensaios experimentais em túnel de vento. A descrição dos procedimentos adotados é apresentada no Capítulo 3. O Capítulo 4 é dedicado aos testes elétricos. Nesta etapa, foi desenvolvido um banco de testes para obtenção das características específicas das máquinas-base, como curvas de potência, rendimento elétrico, análise e perdas mecânicas e elétricas, e aquecimento. Este capítulo termina com a análise crítica dos valores obtidos. Foram realizados testes de campo de todo o conjunto montado. Atualmente, o aerogerador de 5kW encontra-se em operação, instrumentado e equipado com sistema de aquisição de dados para consolidação dos testes de confiabilidade. Os testes de campo estão ocorrendo na cidade de Campos, RJ, e abrangeram as seguintes dimensões de análise; testes de eficiência para determinação da curva de potência, níveis de ruído e atuação de dispositivos de segurança. Os resultados esperados pelo projeto foram atingidos, consolidando o projeto de um aerogerador de 5000W.

Distribuição das assembleias de girinos associadas a riachos da Reserva Ecológica de Guapiaçu, Cachoeiras de Macacú, Rio de Janeiro, Brasil

Os girinos são organismos diversos e abundantes nos pequenos riachos de cabeceira de florestas tropicais e constituem importantes componentes da diversidade biológica, da trófica e funcional dos sistemas aquáticos. Diferentes características estruturais e limnológicas dos ambientes aquáticos influenciam a organização das assembleias de girinos. Embora o estágio larvar dos anuros seja o mais vulnerável de seu ciclo de vida, sujeito a elevadas taxas de mortalidade, as pesquisas sobre girinos na região neotropical ainda são pouco representativas diante da elevada diversidade de anfíbios desta região e ferramentas que permitam a sua identificação ainda são escassas. Nesta tese, dividida em três capítulos, apresento uma compilação das informações relacionadas aos principais fatores que afetam as assembleias de girinos na região tropical (Capítulo 1), a caracterização morfológica dos girinos encontrados nos riachos durante o estudo e uma proposta de chave dicotômica de identificação (Capítulo 2) e avalio a importância relativa da posição geográfica e da variação temporal de fatores ambientais locais sobre as assembleias de girinos, assim como a correlação entre as espécies de girinos e as variáveis ambientais de 10 riachos, ao longo de 15 meses, nas florestas da REGUA (Capítulo 3). Há pelo menos oito tendências relacionadas à distribuição das assembleias de girinos: (1) o tamanho dos riachos e a diversidade de microhabitats são importantes características abióticas influenciando a riqueza e a composição de espécies; (2) em poças, o gradiente de permanência (e.g., hidroperíodo) e a heterogeneidade do habitat são os principais fatores moldando as assembleias de girinos; (3) a composição de espécies parece ser um parâmetro das assembleias mais relevante do que a riqueza de espécies e deve ser primeiramente considerado durante o planejamento de ações conservacionistas de anuros associados a poças e riachos; (4) a predação parece ser a interação biótica mais importante na estruturação das assembleias de girinos, com predadores vertebrados (e.g. peixes) sendo mais vorazes em habitats permanentes e predadores invertebrados (e.g. larvas de odonata) sendo mais vorazes em ambientes temporários; (5) os girinos podem exercer um efeito regulatório, predando ovos e girinos recém eclodidos; (6) o uso do microhabitat varia em função da escolha do habitat reprodutivo pelos adultos, presença de predadores, filogenia, estágio de desenvolvimento e heterogeneidade do habitat; (7) os fatores históricos restringem os habitats reprodutivos que uma espécie utiliza, impondo restrições comportamentais e fisiológicas; (8) a variação temporal nos fatores bióticos (e.g., fatores de risco), abióticos (e.g., distribuição de chuvas), e no padrão de reprodução das espécies pode interferir na estrutura das assembleias de girinos tropicais. A variação temporal na heterogeneidade ambiental dos riachos da REGUA resultou na previsibilidade das assembleias locais de girinos, sendo que os parâmetros ambientais explicaram 23% da variação na sua composição. Os parâmetros espaciais explicaram uma porção menor da variação nas assembleias (16%), enquanto uma porção relativamente elevada da variação temporal da heterogeneidade ambiental foi espacialmente estruturada (18%). As variáveis abióticas que apresentaram as maiores correlação com a composição das assembleias de girinos foram a proporção de folhiço e de rochas no fundo do riacho, e secundariamente a profundidade, a condutividade e a temperatura. O gradiente gerado pela proporção de folhiço e de rochas representou a transição entre riachos permanentes e intermitentes. Este gradiente proporcionou o turnover de espécies, o qual também seguiu um gradiente de condutividade, temperatura, profundidade, e em menor extensão, de hidroperíodo e largura, que estiveram fortemente associado ao grau de permanência dos riachos. Estes resultados corroboram tanto a hipótese do controle ambiental, como do controle biótico de comunidades e indicam que a variação temporal da heterogeneidade ambiental e a variação na posição geográfica são importantes para a estruturação local de assembleias de girinos da REGUA. Os resultados também permitiram distinguir entre assembleias de girinos exclusivas de riachos permanentes, exclusivas de riachos intermitentes e aquelas registradas nos dois tipos de riachos. Os resultados deste capítulo são relevantes para compreender em que extensão os efeitos da variação temporal na heterogeneidade ambiental e de processos espaciais afetam localmente a estruturação de assembleias de girinos.

地幔压力下CaSiO3 Perovskite状态方程和弹性常数的第一性原理研究

In the past decade density functional theory (DFT) has made its way from a peripheral position in quantum chemistry to center. Of course the often excellent accuracy of the DFT based methods has provided the primary driving force of this development. This dissertation is devoted to the study of physical and chemical properties of planetary materials by first-principle calculation. The concerned properties include the geometry, elastic constants and anisotropy. In the first chapter, we give a systematic introduction to theoretical background and review its progress. Development of quantum chemistry promotes the establishment of DFT. Theorem of Hohenberg-Kohn is the fundament of DFT and is developed to Kohn-Sham equation, which can be used to perform real calculations. Now, new corrections and extensions, together with developed exchange-correlation, have made DFT more accurate and suitable for larger systems. In the second chapter, we focus on the calculational methods and technical aspects of DFT. Although it is important to develop methods and program, external package are still often used. At the end of this chapter, we briefly some widely used simulation package and the application of DFT. In the third chapter, we begin to focus on properties of real materials by first principles calculation. We study a kind of minerals named Ca perovskite, investigate its possible structure and anisotropy at Earth’s mental condition. By understanding and predicting geo-physically important materials properties at extreme conditions, we can get the most accurate information to interpret seismic data in the context of likely geophysical processes.

Freedom to learn: a radically revised pedagogy to facilitate lifewide learning in the academic curriculum.

Higher education has progressed fairly steadily to a common pedagogical approach which centres on the idea of alignment. In this arrangement, intended learning outcomes are identified and declared; learning activities which will enable the desired learning and development to be achieved are conceived and undertaken with the support of appropriate and effective teaching; and assessment which calls for these outcomes is (ideally) carefully designed and implemented. All three elements are aligned in advance. The same principles and practices underpinned by notions of alignment have been applied to date in most of the purposeful schemes for personal development planning. In this chapter I argue that lifewide learning, wherein learning and development often occur incidentally in multiple and varied real-world situations throughout an individual’s life course, calls for a different approach, and a different pedagogy. Higher education should therefore visualise lifewide learning as an emergent phenomenon wherein the outcomes of learning emerge later on, and are often unintended. Consequently, they cannot be defined in advance of the activities through which they are formed. The main purpose of this chapter is to offer some practical ideas to support the development of pedagogies that would enable programme designers to embed in their programmes the principle and practice of lifewide education.

Sedentariness and physical inactivity in diabetes: a case for home-based exercise prescription

Increasing proportions of the global population are being diagnosed with diabetes. It is anticipated that by 2030, 10% of the adult population worldwide will be living with this condition. Lifestyle factors can impact on the development, management and progression of diabetes. Obesity and sedentary living are contributory factors to the increased volume of diabetes. Physical activity offers those living with diabetes the opportunities to keep well and attain potentially more stable blood glucose control reducing the level of medical intervention required and delaying or preventing some of the life-changing complications that can derive from a diabetes diagnosis. Exercise interventions are effective in preventing and treating type-II diabetes. However, maintaining regular exercise routines, especially home-based exercises may provide a key for sustaining the health benefits.

Metodologiczne podstawy negatywistycznej metafizyki unitarnej Leszka Nowaka. Próba reinterpretacji procedury konkretyzacji oraz konstrukcja kategorii materii na gruncie metafizyki negatywistycznej

Wydział Nauk Społecznych: Instytut Filozofii

„Livre des merveilles”. Burgundzka wizja Orientu późnego średniowiecza w miniaturach manuskryptu fr. 2810 z Bibliothèque nationale de France

Wydział Historyczny: Instytut Historii Sztuki

Od wielkich do małych narracji. Definiowanie sztuki w kulturze płynności

Wydział Nauk Społecznych: Instytut Kulturoznawstwa

Integracja szlaków sygnalizacyjnych interferonu gamma i receptora TLR4 w procesie zapalnym naczyń krwionośnych, warunkowana czynnikami transkrypcyjnymi STAT1 i IRF

Wydział Biologii: Instytut Biologii Molekularnej i Biotechnologii Zakład Genetyki Molekularnej Człowieka

Computer-Mediated Communication and Ecclesiological Challenges To and From the Reformed Tradition

Communities of faith have appeared online since the inception of computer -­ mediated communication (CMC)and are now ubiquitous. Yet the character and legitimacy of Internet communities as ecclesial bodies is often disputed by traditional churches; and the Internet's ability to host the church as church for online Christians remains a question. This dissertation carries out a practical theological conversation between three main sources: the phenomenon of the church online; ecclesiology (especially that characteristic of Reformed communities); and communication theory. After establishing the need for this study in Chapter 1, Chapter 2 investigates the online presence of Christians and trends in their Internet use, including its history and current expressions. Chapter 3 sets out an historical overview of the Reformed Tradition, focusing on the work of John Calvin and Karl Barth, as well as more contemporary theologians. With a theological context in which to consider online churches in place, Chapter 4 introduces four theological themes prominent in both ecclesiology and CMC studies: authority; community; mediation; and embodiment. These themes constitute the primary lens through which the dissertation conducts a critical-­confessional interface between communication theory and ecclesiology in the examination of CMC. Chapter 5 continues the contextualization of online churches with consideration of communication theories that impact CMC, focusing on three major communication theories: Narrative Theory; Interpretive Theory; and Speech Act Theory. Chapter 6 contains the critical conversation between ecclesiology and communication theory by correlating the aforementioned communication theories with Narrative Theology, Communities of Practice, and Theo-­Drama, and applying these to the four theological themes noted above. In addition, new or anticipated developments in CMC investigated in relationship to traditional ecclesiologies and the prospect of cyber-­ecclesiology. Chapter 7 offers an evaluative tool consisting of a three-­step hermeneutical process that examines: 1) the history, tradition, and ecclesiology of the particular community being evaluated; 2) communication theories and the process of religious-­social shaping of technology; and 3) CMC criteria for establishing the presence of a stable, interactive, and relational community. As this hermeneutical process unfolds, it holds the church at the center of the process, seeking a contextual yet faithful understanding of the church.

Claude McKay and the transnational novel

This thesis considers the three works of fiction of the Jamaican author Claude McKay (1889-1948) as a coherent transnational trilogy which dramatises the semi-autobiographical complexities of diasporic exile and return in the period of the 1920s and 1930s. Chapter One explores McKay’s urban North American novel, Home to Harlem (1928). I suggest that we need to ‘reworld’ conceptions of McKay’s writing in order to release him from his canonical confinement in the Harlem Renaissance. Querying the problematics of the city space, of sexuality and of race as they emerge in the novel, this chapter considers McKay’s percipient understanding of the need to reconfigure diasporic identity beyond the limits set by American nationalism. Chapter Two engages with McKay’s novel of portside Marseilles, Banjo (1929), and considers the homosocial interactions of the vagabond collective. A comparison of North America and France as supposed exemplars of individual liberty highlights the unsuitability of nationalistic prerogatives to an internally diverse black diaspora. Paul Gilroy’s Black Atlantic construct provides a suggestive space in which to re-imagine the possibilities of affiliation in the port. The latter section of the chapter examines McKay’s particular influence on, and relationship, to the Négritude movement and Pan-African philosophies. Chapter Three focuses on McKay’s third novel, Banana Bottom (1933). I suggest here that the three novels comprise a coherent New World Trilogy comparable to Edward (Kamau) Brathwaite’s trilogy, The Arrivants. This chapter considers both the Caribbean and the transnational dimensions to McKay’s work.

The Queen's College, Cork: its origins and early history, 1803-1858

This work examines the origins and early history of the Queen's College, Cork. Designedly there is as much stress on the origins as on the early history, for it is the contention of the work that the College was something more than a legislative mushroom. It was very much in the tradition of the civic universities which added an exciting new dimension to academic life in these islands in the nineteenth century. The first chapter surveys university practice and thinking at the opening of the century, relying exclusively on published sources. The second chapter is devoted specifically to the state of learning in Cork during the period, and makes extensive use of hitherto unpublished manuscript material in relation to the Royal Cork Institution. The third chapter deals with the highly significant evidence on education embodied in the Report of the Select Committee on Irish Education of 1838. This material has not previously been published. In chapter four an extended study is made of relevant letters in the manuscript correspondence of Sir Robert Peel - even the most recent authoritative biography has ignored this material. The remaining three chapters are devoted more specifically to the College, both in the formulation or policy and in its practical working. In chapter six there is an extended survey of early College life based exclusively on hitherto unpublished manuscript material in the College Archives. All of these sources, together with incidental published material, are set out at the end of each chapter.

An Irish apostle: articulating and actualising apostolicity in the early Irish church

This thesis examines the earliest extant Latin Lives of Brigit and Patrick; Cogitosus’s Vita Brigidae and Muirchú’s Vita Patricii as evidence for a seventh-century debate on Irish apostolicity. While often dismissed as mere propaganda, this thesis shows they are highly sophisticated demonstrations of the continuing connection that Kildare and Armagh had to their patron saints and their authority. It examines the importance of this connection for concepts of ecclesiastical organisation, teaching authority and episcopal succession against the backdrop of the seventh-century Easter question in the Insular Church. This will show that apostolicity was considered to be intrinsically linked with orthodoxy and universality. A textual focus brings forth general patristic themes and ideas that Irish hagiographers evoked through specific words and phrases. The thesis contextualises hagiographical material using evidence from Hiberno-Latin and early Insular exegetical commentaries, referring to major patristic exegetes such as Origen, Jerome, Augustine, and Gregory the Great as support. The introduction discusses the importance of apostolic ideology for the seventh-century Irish Church, and outlines a methodology for examining such abstract themes. The first chapter looks at how developments in apostolic ideology led to ideas of apostolic primacy seen in the Insular material. Chapters two, three, and four examine metaphors of food and feeding, the fountain and the stream, and the head and the body, as significant articulations of apostolicity. Chapter five examines how corporeal relics were understood as the visible proof of this continuity and preserved a saint’s authority for their episcopal heirs. Chapter six looks at how Muirchú engaged with Patrick’s connection to the universal Church and his self-professed lack of disciplina to reconcile his apostolicity with seventh-century norms. Chapter seven places the issues considered thus far in a thoroughly Insular context by examining how the earliest English sources present the Irish legacy in Northumbria after the synod of Whitby. Chapter eight looks at how the text of Patrick’s Confessio in the Book of Armagh relates to a wider seventh-century campaign by Armagh to rehabilitate Patrick’s apostolicity. The conclusion briefly summarizes the thesis, and suggests further avenues for researching this topic in the Insular material

Uncle Tom's Cabin and the Irish National Tale

Accepted Version