Testing Delivery Systems in Transnational virtual learning: the vocational management training for the european tourism industry (VocMat) case study

This article discusses the lessons learned from developing and delivering the Vocational Management Training for the European Tourism Industry (VocMat) online training programme, which was aimed at providing flexible, online distance learning for the European tourism industry. The programme was designed to address managers ‘need for flexible, senior management level training which they could access at a time and place which fitted in with their working and non-work commitments. The authors present two main approaches to using the Virtual Learning Environment, the feedback from the participants, and the implications of online Technology in extending tourism training opportunities

Research in Architecture: Looking Backward and Forward: Forty-Year Experience in Architectural Research at the Faculty of Architecture STU

The introduction of my contribution contains a brief information on the Faculty of Architecture of the Slovak University of Technology in Bratislava (FA STU) and the architectural research performed at this institution. Schemes and priorities of our research in architecture have changed several times since the very beginning in early 50’s. The most significant change occurred after “the velvet revolution” in 1989. Since 1990 there have been several sources to support research at universities. The significant part of my contribution is rooted in my own research experience since the time I had joined FA STU in 1975 as a young architect and researcher. The period of the 80’s is characterized by the first unintentional attempts to do “research by design” and my “scientific” achievements as by-products of my design work. Some of them resulted in the following issues: conception of mezzo-space, theory of the complex perception of architectural space and definition of basic principles of ecologically conscious architecture. Nowadays I continue my research by design within the application of so called solar envelope in urban scale with my students.

Uma escola para todos : práticas, estratégias e metodologias

A escola inclusiva continua a caminhar para a realidade que se pretende. Não obstante, há que contribuir para continuar a abrir o caminho que as escolas necessitam de percorrer, no sentido de se adaptarem e criarem as condições essenciais para a realização e felicidade de todas as crianças/jovens que a essas mesmas condições têm direito. No Trabalho de Projeto apresentado, aborda-se a trajetória de um grupo/turma, tendo como perspetiva o abrir caminho para práticas inclusivas, nas nossas escolas. Esta investigação surge, assim, como uma forma ou tentativa de intervir na construção de uma escola e educação para todos, tendo como ponto de partida uma turma do 8º ano de escolaridade, numa escola básica, situada no concelho de Almada. É feita a apresentação teórica da temática em questão, após ter sido realizada uma investigação documental, procedendo-se posteriormente à recolha e análise de dados, utilizando a pesquisa documental, a entrevista, a observação naturalista e a sociometria. Segue-se a caracterização da turma, do aluno e dos contextos em que as mesmas se inserem, partimos para uma intervenção estruturada, a longo e a curto prazo, numa dinâmica de planificação/ação/reflexão, onde se aplicam práticas educativas diferenciadas e inclusivas. Foi nosso objetivo, com este trabalho de projeto, conseguir que o grupo alvo seja inclusivo, tendo como base uma abordagem sistémica e ecológica, numa aprendizagem e ensino cooperativos, onde imperem pedagogias e ambientes fomentadores de um contexto escolar aberto à diversidade e à entrada das tecnologias de apoio na sala de aula. A família assume, neste projeto, um papel ativo no contexto escolar, sendo dada a relevância que a mesma deve ter no processo educativo dos seus educandos, partindo do princípio que qualquer intervenção que se planeie só tem sucesso efetivo com a participação ativa das famílias, colaborando e articulando com a comunidade escolar e desenvolvendo, em contexto familiar, medidas e estratégias interventivas que se vão repercutir fortemente no sucesso educativo das crianças e dos jovens. Neste projeto, implementaram-se estratégias que vão da caraterização inicial da situação à reflexão final que dão continuidade ao desenvolvimento de competências na área da autonomia, sociabilização e aprendizagens académicas do grupo, onde emerge o Teresa Figueiredo – Uma escola para todos: práticas, estratégias e metodologias ULHT-Instituto de Educação 4 João1, aluno com necessidades educativas especiais decorrentes de paralisia cerebral, que se encontra ao abrigo do Decreto-Lei 3/2008, de 7 de Janeiro, acompanhado pela educação especial. Foram alvo desta intervenção vários contextos, considerados prioritários: escolar; sala de aula; conselho de turma; apoio especializado e familiar. O desenvolvimento da intervenção, nos contextos mencionados foi norteado pelos princípios defendidos pela educação inclusiva, princípios explanados no enquadramento teórico da pesquisa realizada, no desenvolvimento deste Projeto. Como resultados da intervenção conseguimos um grupo/turma mais autónomo, com melhor funcionalidade no contexto escolar, onde os alunos aprendem todos juntos, com a entrada de tecnologias de apoio na sala de aula e pedagogias que vão ao encontro das necessidades do grupo e de cada um. As aprendizagens tornaram-se mais acessíveis a todos, com os professores a planificarem atividades direcionadas para o desenvolvimento do trabalho cooperativo e da parceria pedagógica, práticas que contribuem para uma comunidade escolar motivada para a construção de uma escola, cada vez mais, para todos.

The French Constitutional Council as the Rottweiler of the Republican Ideal in the Language Field: Does Jurisprudence Really Reflect Reality? EDAP 03/2012, 2012

France is known for being a champion of individual rights as well as for its overt hostility to any form of group rights. Linguistic pluralism in the public sphere is rejected for fear of babelization and Balkanization of the country. Over recent decades the Conseil Constitutionnel (CC) has, together with the Conseil d’État, remained arguably the strongest defender of this Jacobin ideal in France. In this article, I will discuss the role of France’s restrictive language policy through the prism of the CC’s jurisprudence. Overall, I will argue that the CC made reference to the (Jacobin) state-nation concept, a concept that is discussed in the first part of the paper, in order to fight the revival of regional languages in France over recent decades. The clause making French the official language in 1992 was functional to this policy. The intriguing aspect is that in France the CC managed to standardise France’s policy vis-à-vis regional and minority languages through its jurisprudence; an issue discussed in the second part of the paper. But in those regions with a stronger tradition of identity, particularly in the French overseas territories, the third part of the paper argues, normative reality has increasingly become under pressure. Therefore, a discrepancy between the ‘law in courts’ and the compliance with these decisions (‘law in action’) has been emerging over recent years. Amid some signs of opening of France to minorities, this contradiction delineates a trend that might well continue in future.

Dental training system using haptic technology

In the U.K., dental students require to perform training and practice on real human tissues at the very early stage of their courses. Currently, the human tissues, such as decayed teeth, are mounted in a human head like physical model. The problems with these models in teaching are; (1) every student operates on tooth, which are always unique; (2) the process cannot be recorded for examination purposes and (3) same training are not repeatable. The aim of the PHATOM Project is to develop a dental training system using Haptic technology. This paper documents the project background, specification, research and development of the first prototype system. It also discusses the research in the visual display, haptic devices and haptic rendering. This includes stereo vision, motion parallax, volumetric modelling, surface remapping algorithms as well as analysis design of the system. A new volumetric to surface model transformation algorithm is also introduced. This paper includes the future work on the system development and research.

Reductions in insecticide use from adoption of Bt cotton in South Africa: impacts on economic performance and toxic load to the environment

The study reported presents the findings relating to commercial growing of genetically-modified Bt cotton in South Africa by a large sample of smallholder farmers over three seasons (1998/99, 1999/2000, 2000/01) following adoption. The analysis presents constructs and compares groupwise differences for key variables in Bt v. non-Bt technology and uses regressions to further analyse the production and profit impacts of Bt adoption. Analysis of the distribution of benefits between farmers due to the technology is also presented. In parallel with these socio-economic measures, the toxic loads being presented to the environment following the introduction of Bt cotton are monitored in terms of insecticide active ingredient (ai) and the Biocide Index. The latter adjusts ai to allow for differing persistence and toxicity of insecticides. Results show substantial and significant financial benefits to smallholder cotton growers of adopting Bt cotton over three seasons in terms of increased yields, lower insecticide spray costs and higher gross margins. This includes one particularly wet, poor growing season. In addition, those with the smaller holdings appeared to benefit proportionately more from the technology (in terms of higher gross margins) than those with larger holdings. Analysis using the Gini-coefficient suggests that the Bt technology has helped to reduce inequality amongst smallholder cotton growers in Makhathini compared to what may have been the position if they had grown conventional cotton. However, while Bt growers applied lower amounts of insecticide and had lower Biocide Indices (per ha) than growers of non-Bt cotton, some of this advantage was due to a reduction in non-bollworm insecticide. Indeed, the Biocide Index for all farmers in the population actually increased with the introduction of Bt cotton. The results indicate the complexity of such studies on the socio-economic and environmental impacts of GM varieties in the developing world.

Factors affecting the adoption of leguminous cover crops in Nigeria and a comparison with the adoption of new crop varieties

This paper presents the results of (a) On-farm trials (eight) over a two-year period designed to test the effectiveness of leguminous cover crops in terms of increasing maize yields in Igalaland, Nigeria. (b) A survey designed to monitor the extent of, and reasons behind, adoption of the leguminous cover crop technology in subsequent years by farmers involved, to varying degrees, in the trial programme. particular emphasis was placed on comparing adoption of leguminous cover crops with that of new crop varieties released by a non-governmental organization in the same area since the mid 1980s. While the leguminous cover crop technology boosted maize grain yields by 127 to 136% above an untreated control yield of between 141 and 171 kg ha(-1), the adoption rate (number of farmers adopting) was only 18%. By way of contrast, new crop varieties had a highly variable benefit in terms of yield advantage over local varieties, with the best average increase of around 20%. Adoption rates for new crop varieties, assessed as both the number of farmers growing the varieties and the number of plots planted to the varieties, were 40% on average. The paper discusses some key factors influencing adoption of the leguminous cover crop technology, including seed availability. Implications of these results for a local non-governmental organization, the Diocesan Development Services, concerned with promoting the leguminous cover crop technology are also discussed.

Reductions in insecticide use from adoption of Bt cotton in South Africa: impacts on economic performance and toxic load to the environment

The study reported presents the findings relating to commercial growing of genetically-modified Bt cotton in South Africa by a large sample of smallholder farmers over three seasons (1998/99, 1999/2000, 2000/01) following adoption. The analysis presents constructs and compares groupwise differences for key variables in Bt v. non-Bt technology and uses regressions to further analyse the production and profit impacts of Bt adoption. Analysis of the distribution of benefits between farmers due to the technology is also presented. In parallel with these socio-economic measures, the toxic loads being presented to the environment following the introduction of Bt cotton are monitored in terms of insecticide active ingredient (ai) and the Biocide Index. The latter adjusts ai to allow for differing persistence and toxicity of insecticides. Results show substantial and significant financial benefits to smallholder cotton growers of adopting Bt cotton over three seasons in terms of increased yields, lower insecticide spray costs and higher gross margins. This includes one particularly wet, poor growing season. In addition, those with the smaller holdings appeared to benefit proportionately more from the technology (in terms of higher gross margins) than those with larger holdings. Analysis using the Gini-coefficient suggests that the Bt technology has helped to reduce inequality amongst smallholder cotton growers in Makhathini compared to what may have been the position if they had grown conventional cotton. However, while Bt growers applied lower amounts of insecticide and had lower Biocide Indices (per ha) than growers of non-Bt cotton, some of this advantage was due to a reduction in non-bollworm insecticide. Indeed, the Biocide Index for all farmers in the population actually increased with the introduction of Bt cotton. The results indicate the complexity of such studies on the socio-economic and environmental impacts of GM varieties in the developing world.

Expression of target and reference genes in Daphnia magna exposed to ibuprofen

Background: Transcriptomic techniques are now being applied in ecotoxicology and toxicology to measure the impact of stressors and develop understanding of mechanisms of toxicity. Microarray technology in particular offers the potential to measure thousands of gene responses simultaneously. However, it is important that microarrays responses should be validated, at least initially, using real-time quantitative polymerase chain reaction (QPCR). The accurate measurement of target gene expression requires normalisation to an invariant internal control e. g., total RNA or reference genes. Reference genes are preferable, as they control for variation inherent in the cDNA synthesis and PCR. However, reference gene expression can vary between tissues and experimental conditions, which makes it crucial to validate them prior to application. Results: We evaluated 10 candidate reference genes for QPCR in Daphnia magna following a 24 h exposure to the non-steroidal anti-inflammatory drug (NSAID) ibuprofen (IB) at 0, 20, 40 and 80 mg IB l(-1). Six of the 10 candidates appeared suitable for use as reference genes. As a robust approach, we used a combination normalisation factor (NF), calculated using the geNorm application, based on the geometric mean of three selected reference genes: glyceraldehyde-3-phosphate dehydrogenase, ubiquitin conjugating enzyme and actin. The effects of normalisation are illustrated using as target gene leukotriene B4 12-hydroxydehydrogenase (Ltb4dh), which was upregulated following 24 h exposure to 63-81 mg IB l(-1). Conclusions: As anticipated, use of the NF clarified the response of Ltb4dh in daphnids exposed to sublethal levels of ibuprofen. Our findings emphasise the importance in toxicogenomics of finding and applying invariant internal QPCR control(s) relevant to the study conditions.

Mapping IT innovation in Facilities Management

Over the past decade there has been significant growth in the facilities management (FM) sector resulting in a diverse and highly competitive marketplace. This marketplace engages contractors, in-house teams, suppliers, consultants and professional institutions. Many of these organisations have had to innovate to differentiate themselves from competitors. The subject of this paper is facilities management innovation. More specifically, it examines the introduction of information technology (IT) to support such innovations. Our understanding of how such innovations are brought about is scant. The intention of this paper is to examine the motivations and factors which have brought about ‘information system’ innovations in the sector based on an examination of a small but diverse collection of case studies. The study specifically considers the route by which the selected innovations came about and the way in which the innovation has diffused throughout the rest of the organisation. The IT innovations identified in case studies include whole life cost modelling, a content management solution, open book partnering, management information portal (fmNet), RFID technology, and capacity and capability planning. Taken together they characterise a sector that is using IT to codify and standardise information such that useful knowledge becomes widely dispersed.

Opportunities and challenges in high pressure processing of foods

Consumers increasingly demand convenience foods of the highest quality in terms of natural flavor and taste, and which are freedom additives and preservatives. This demand has triggered the need for the development of a number of nonthermal approaches to food processing, of which high-pressure technology has proven to be very valuable. A number of recent publications have demonstrated novel and diverse uses of this technology. Its novel features, which include destruction of microorganisms at room temperature or lower, have made the technology commerically attractive. Enzymes forming bacteria can be by the application of pressure-thermal combinations. This review aims to identify the opportunities and challenges associated with this technology. In addition to discussing the effects of high pressure on food components, this review covers the combined effects of high pressure processing with: gamma irradiation, alternating current, ultrasound, and carbon dioxide or anti-microbial treatment. Further, the applications of this technology in various sectors-fruits and vegetables, dairy and meat processing-have been dealt with extensively. The integration of high-pressure with other matured processing operations such as blanching, dehydration, osmotic dehydration, rehyrdration, frying, freezing/thawing and solid-liquid extraction has been shown to open up new processing options. The key challenges identified include: heat transfer problems and resulting non-uniformity in processing, obtaining reliable and reproducible data, for process validation, lack of detailed knowledge about the interaction between high pressure, and a number of food constituents, packaging and statutory issues.

Motor brain regions are involved in the encoding of delayed intentions: a fMRI study

In studies of prospective memory, recall of the content of delayed intentions is normally excellent, probably because they contain actions that have to be enacted at a later time. Action words encoded for later enactment are more accessible from memory than those encoded for later verbal report [Freeman, J.E., and Ellis, J.A. 2003a. The representation of delayed intentions: A prospective subject-performed task? Journal of Experimental Psychology: Learning, Memory, and Cognition, 29, 976-992.]. As this higher assessibility is lost when the intended actions have to be enacted during encoding, or when a motor interference task is introduced concurrent to intention encoding, Freeman and Ellis suggested that the advantage of to-be-enacted actions is due to additional preparatory motor operations during encoding. Accordingly, in a fMRI study with 10 healthy young participants, we investigated whether motor brain regions are differentially activated during verbal encoding of actions for later enactment with the right hand in contrast to verbal encoding of actions for later verbal report. We included an additional condition of verbal encoding of abstract verbs for later verbal report to investigate whether the semantic motor information inherent in action verbs in contrast to abstract verbs activates motor brain regions different from those involved in the verbal encoding of actions for later enactment. Differential activation for the verbal encoding of to-be-enacted actions in contrast to to-be-reported actions was found in brain regions known to be involved in covert motor preparation for hand movements, i.e. the postcentral gyrus, the precuneus, the dorsal and ventral premotor cortex, the posterior middle temporal gyrus and the inferior parietal lobule. There was no overlap between these brain regions and those differentially activated during the verbal encoding of actions in contrast to abstract verbs for later verbal report. Consequently, the results of this fMRI study suggest the presence of preparatory motor operations during the encoding of delayed intentions requiring a future motor response, which cannot be attributed to semantic information inherent to action verbs. (c) 2006 Elsevier B.V. All rights reserved.

Semi-automatic annotation and retrieval of visual content using the topic map technology

There are still major challenges in the area of automatic indexing and retrieval of multimedia content data for very large multimedia content corpora. Current indexing and retrieval applications still use keywords to index multimedia content and those keywords usually do not provide any knowledge about the semantic content of the data. With the increasing amount of multimedia content, it is inefficient to continue with this approach. In this paper, we describe the project DREAM, which addresses such challenges by proposing a new framework for semi-automatic annotation and retrieval of multimedia based on the semantic content. The framework uses the Topic Map Technology, as a tool to model the knowledge automatically extracted from the multimedia content using an Automatic Labelling Engine. We describe how we acquire knowledge from the content and represent this knowledge using the support of NLP to automatically generate Topic Maps. The framework is described in the context of film post-production.