predicting upgrade project defects based on enhancement requirements: an empirical study

Chinese Acad Sci, ISCAS Lab Internet Software Technologies

Computer simulation of the damage evolution of fiber-reinforced polypropylene-matrix composites with matrix defects

The damage evolution of fiber-reinforced polypropylene-matrix composites with matrix defects was studied via a Monte Carlo technique combined with a finite element method. A finite element model was constructed to predict the effects of various matrix defect shapes on the stress distributions. The results indicated that a small matrix defect had almost no effect on fiber stress distributions other than interfacial shear stress distributions. Then, a finite element model with a statistical distribution of the fiber strength was constructed to investigate the influences of the spatial distribution and the volume fraction of matrix defects on composite failure. The results showed that it was accurate to use the shear-lag models and Green's function methods to predict the tensile strength of composites even though the axial stresses in the matrix were neglected.

Direct electron transfer reaction of horse heart hemoglobin at the indium oxide electrode

A direct, quasi-reversible electrochemical reaction of horse heart hemoglobin without further purification was obtained for the first time at the indium oxide electrode when oxygen was removed from the solution and hemoglobin molecules. It was found that removing oxygen from the solution and hemoglobin molecules is an important factor for obtaining the quasi-reversible electrochemical reaction of hemoglobin.

Electrochemical identification of intermediate forms of urea denaturation of horse heart cytochrome c

The electrochemical identification of the urea denaturation of horse heart cytochrome c in bulk solution at the 4,4'-dithiodipyridine-modified gold electrode is reported. The results are similar to the three-step transitions of equilibrium studies (Myer et al., Biochemistry, 19 (1980) 199) of urea denaturation of cytochrome c in bulk solution. This method permits a clear resolution of which of the three steps of urea denaturation is electrochemically related. In addition, by analysing the effects of urea on the structural forms of cytochrome c and on the solution properties, as well as the cyclic voltammetric responses of the protein, the individual forms of the urea denaturation of cytochrome c can be understood. The results reflect the superposition of protein denaturation on the electrode surface and in solution.

RADIATION-INDUCED CRYSTAL DEFECTS IN PTFE

Changes induced in the crystal structure of PTFE by irradiation at different temperatures have been investigated. In the dose and temperature range examined, the density of PTFE was observed to increase continuously with increasing dose due to the radiation-induced increase in crystallinity, while after post-irradiation annealing at 380-degrees-C, the density was observed to increase for samples irradiated at 20-degrees-C, and to begin to decrease after a certain dose for samples irradiated at 150 and 200-degrees-C. On the basis of the observation of radiation-induced separation of the melting peak of PTFE and its stability relative to the change in the rate of heating, the observed decrease in density was explained as being due to the radiation-induced crosslinking and/or branching inhibiting the process of crystallization and existing in the crystalline region as defects.

Suppression of zebrafish VEGF gene by cytomegalovirus promoter-driven short hairpin constructs induces vascular development defects and down regulation NRP1 expression

The usage of RNA interference for gene knockdown in zebrafish through expression of the small interfering RNA mediators from DNA vectors has created a lot of excitement in the research community. In this work, the ability of human cytomegalovirus immediate early promoter (CMV promoter)-driven short hairpin RNA (shRNA) expression vector to induce shRNA against vascular endothelial growth factor (VEGF) gene in zebrafish was tested, and its effects on VEGF-mediated vasculogenesis and angiogenesis were evaluated. Altogether four vectors targeting various locations of VEGF gene were constructed, and pSI-V4 was proven to be the most effective one. Microinjection of pSI-V4 into the zebrafish embryos resulted in defective vascular formation and down regulation of VEGF expression. In situ hybridization analysis indicated that silencing VEGF gene expression by pSI-V4 resulted in down regulation of neuropilin-1 (NRP1), a potent VEGF receptor. Knockdown of VEGF expression by morpholino gave the same result. This provided evidence that the VEGF-mediated angiogenesis in zebrafish was in part dependent on NRP1 expression. The results contributed to a better understanding of molecular mechanisms of cardiovascular development and provided a potential promoter for making inducible knockdown in zebrafish.

VEGF gene silencing by cytomegalovirus promoter driven ShRNA expression vector results in vascular development defects in zebrafish

Zebrafish has been generally considered as an excellent model in case of drug screening, disease model establishment, and vertebrate embryonic development study. In this work, the ability of human cytomegalovirus immediate early promoter (CMV promoter)-driven short hairpin RNA (shRNA) expression vector to induce shRNA against VEGF gene in zebrafish was tested, and its effect on vascular development was assed, too. Using RT-qPCR, blood vessel staining, and in situ hybridization, we confirmed certain transcriptional activity and down regulation of gene expression by the vector. In situ hybridization analysis indicated selective inhibition of NRP1 expression in the VEGF gene loss of function model, which might imply in turn that VEGF could not only activate endothelial cells directly but also could contribute to stimulating angiogenesis in vivo by a mechanism that involved up-regulation of its cognate receptor expression in zebrafish. This contributed to a better understanding of molecular mechanisms of cardiovascular development. The system improved the success rate in making inducible knockdown and widened the possibilities for better therapeutic targets in zebrafish.

靶向斑马鱼VEGF的shRNA表达载体的构建及其对斑马鱼胚胎血管发育的影响

血管内皮生长因子(vascular endothelial growth factor, VEGF)是一种多功能的细胞因子，其主要作用是促进血管内皮细胞增殖和增加血管通透性，是肿瘤及正常组织血管生成的中心调控因素，以VEGF为靶点的肿瘤血管靶向性治疗成为近几年肿瘤治疗的新途径。RNAi是近年来新发展的一项反向遗传学技术，是一种研究基因功能的有力工具。斑马鱼作为一种重要的模式生物，被广泛用于胚胎的分子发育机制、疾病模型的构建以及药物筛选等研究中。然而在斑马鱼中运用RNAi技术进行基因功能研究是一个相对较新的领域，研究资料较少，并且目前进行的斑马鱼RNAi实验中，siRNA大都是通过化学方法或体外转录合成的。体外合成的siRNA在进入体内后会被降解而无法达到持久阻抑基因表达的目的。因此本研究旨在探讨VEGF特异性siRNA表达载体对斑马鱼VEGF基因的沉默作用，通过分析表型及相关细胞因子的变化，阐明VEGF对斑马鱼胚胎血管生成的影响及作用机制。 研究通过计算机辅助设计软件，针对斑马鱼VEGF mRNA不同位点设计合成了4段含siRNA特异序列的DNA单链，经退火，克隆入pSilencer 4.1-CMV neo载体CMV启动子下游，构建了重组质粒pS1-VEGF、pS2-VEGF、pS3-VEGF及pS4-VEGF。 通过显微注射的方法将载体导入1-2细胞期斑马鱼体内，于胚胎发育的48 h采用RT-PCR的方法检测VEGF基因的表达量，研究不同干扰序列对VEGF基因表达的干涉作用。结果显示，针对不同位点的表达载体对VEGF基因表达的抑制效率有显著差异。它们对VEGF mRNA的抑制率分别为80.5%，42.8%，12.5%，40.7%。通过筛选我们得到了一条具有高效抑制作用的载体pS1-VEGF，该载体的相应序列靶向斑马鱼两个主要异构体VEGF165和VEGF121的共有外显子序列。 形态学检测结果显示，注射了pS1-VEGF的胚胎出现了心包膜水肿、血流速度减慢、循环红细胞堆积等症状。定量碱性磷酸酶染色显示，注射pS1-VEGF能够抑制斑马鱼胚胎新生血管的形成，当注射剂量为0.4 ng时，血管生成的抑制率为31.8%。NBT/BCIP血管染色显示，注射该载体后72 h，50%的斑马鱼肠下静脉、节间血管以及其它血管的发育受到不同程度的抑制。随着注射剂量的加大，血管发育受抑制的情况也随之加重，当注射剂量为1 ng时，只有心脏、头部及卵黄有血液循环。对干扰效果的特异性进行了研究，结果表明pS1-VEGF对斑马鱼内源基因胸苷酸合成酶（thymidylate synthase, TS）基因的表达没有明显的抑制作用。针对TS基因的shRNA表达载体及与斑马鱼没有同源性的对照载体对VEGF基因表达也没有明显的抑制作用。浓度梯度实验表明在0-1.2 ng的范围内干扰效果具有剂量依赖性。 以胚胎整体原位杂交的方法检测质粒对VEGF基因受体NRP1基因表达的影响，发现VEGF特异性shRNA表达载体能够引起NRP1基因表达的降低，说明斑马鱼中VEGF所介导的血管生成作用至少在部分上是依赖于NRP通路所调节的。 本研究工作为进一步研究斑马鱼基因功能、VEGF调控网络提供了一个快速、有效的手段，为阐明斑马鱼的血管生成机制提供了新的资料，为采用RNAi技术，以VEGF为靶点，以斑马鱼为模型对肿瘤进行基因治疗研究奠定了基础。

Effects of hypoxia on contents of essential elements in pika and rat heart

The effects of hypoxia on the levels of essential macroelements and trace elements (K, Na, Ca, Mg, Cu, Zn, Fe, and Mn) in the heart muscles of Wistar rats and plateau pikas (Ochotona curzoniae) were studied by atomic absorption spectrometry. Unlike the rat, the plateau pika is tolerant to hypoxia. The levels of K, Na, and the trace element Mn were not significantly changed in rat or pika hearts after exposure to hypoxia for 1, 10, or 25 d at simulated altitudes of 5000 and 7000 m. Other minerals (Ca, Mg, Cu, Zn, and Fe) were significantly affected by hypoxia and the levels followed different time-courses under different hypoxic regimes in these two animals. There were marked differences between the rat and pika in myocardial accumulation of essential elements such as Ca, which was increased to high levels in the rat but not affected in the pika. The results suggest that hypoxia affects animal physiological mechanisms by regulating the levels of essential elements.

Direct observation of subsurface oxygen on the defects of Pd(100)

Oxygen adsorption and desorption on a Pd(100) surface with a mesoscopic defect were studied by photoemission electron microscopy (PEEM). The defect surface, with an area of approximately 200 x 60 mu m(2), behaved differently from the perfect Pd(100) surface towards the adsorption of oxygen. When saturated, both surface oxygen and subsurface oxygen coexisted on the defect surface, whereas only surface oxygen was present on the Pd(100) surface. Upon heating, subsurface oxygen diffused back to the surface and desorbed with surface oxygen at the same time. The difference in oxygen adsorption ability between the defect surface and the perfect Pd(100) surface can be attributed to different structures of these two surfaces. (C) 1999 Elsevier Science B.V. All rights reserved.

Reflectance Map Techniques for Analyzing Surface Defects in Metal Castings

This report explores the relation between image intensity and object shape. It is shown that image intensity is related to surface orientation and that a variation in image intensity is related to surface curvature. Computational methods are developed which use the measured intensity variation across surfaces of smooth objects to determine surface orientation. In general, surface orientation is not determined locally by the intensity value recorded at each image point. Tools are needed to explore the problem of determining surface orientation from image intensity. The notion of gradient space , popularized by Huffman and Mackworth, is used to represent surface orientation. The notion of a reflectance map, originated by Horn, is used to represent the relation between surface orientation image intensity. The image Hessian is defined and used to represent surface curvature. Properties of surface curvature are expressed as constraints on possible surface orientations corresponding to a given image point. Methods are presented which embed assumptions about surface curvature in algorithms for determining surface orientation from the intensities recorded in a single view. If additional images of the same object are obtained by varying the direction of incident illumination, then surface orientation is determined locally by the intensity values recorded at each image point. This fact is exploited in a new technique called photometric stereo. The visual inspection of surface defects in metal castings is considered. Two casting applications are discussed. The first is the precision investment casting of turbine blades and vanes for aircraft jet engines. In this application, grain size is an important process variable. The existing industry standard for estimating the average grain size of metals is implemented and demonstrated on a sample turbine vane. Grain size can be computed form the measurements obtained in an image, once the foreshortening effects of surface curvature are accounted for. The second is the green sand mold casting of shuttle eyes for textile looms. Here, physical constraints inherent to the casting process translate into these constraints, it is necessary to interpret features of intensity as features of object shape. Both applications demonstrate that successful visual inspection requires the ability to interpret observed changes in intensity in the context of surface topography. The theoretical tools developed in this report provide a framework for this interpretation.