Polyphase Implementation of Non-recursive Comb Decimators for Sigma-Delta A/D Converters

In a sigma-delta analog to digital (A/D) As most of the sigma-delta ADC applications require converter, the most computationally intensive block is decimation filters with linear phase characteristics, the decimation filter and its hardware implementation symmetric Finite Impulse Response (FIR) filters are may require millions of transistors. Since these widely used for implementation. But the number of FIR converters are now targeted for a portable application, filter coefficients will be quite large for implementing a a hardware efficient design is an implicit requirement. narrow band decimation filter. Implementing decimation In this effect, this paper presents a computationally filter in several stages reduces the total number of filter efficient polyphase implementation of non-recursive coefficients, and hence reduces the hardware complexity cascaded integrator comb (CIC) decimators for and power consumption [2]. Sigma-Delta Converters (SDCs). The SDCs are The first stage of decimation filter can be operating at high oversampling frequencies and hence implemented very efficiently using a cascade of integrators require large sampling rate conversions. The filtering and comb filters which do not require multiplication or and rate reduction are performed in several stages to coefficient storage. The remaining filtering is performed reduce hardware complexity and power dissipation. either in single stage or in two stages with more complex The CIC filters are widely adopted as the first stage of FIR or infinite impulse response (IIR) filters according to decimation due to its multiplier free structure. In this the requirements. The amount of passband aliasing or research, the performance of polyphase structure is imaging error can be brought within prescribed bounds by compared with the CICs using recursive and increasing the number of stages in the CIC filter. The non-recursive algorithms in terms of power, speed and width of the passband and the frequency characteristics area. This polyphase implementation offers high speed outside the passband are severely limited. So, CIC filters operation and low power consumption. The polyphase are used to make the transition between high and low implementation of 4th order CIC filter with a sampling rates. Conventional filters operating at low decimation factor of '64' and input word length of sampling rate are used to attain the required transition '4-bits' offers about 70% and 37% of power saving bandwidth and stopband attenuation. compared to the corresponding recursive and Several papers are available in literature that deals non-recursive implementations respectively. The same with different implementations of decimation filter polyphase CIC filter can operate about 7 times faster architecture for sigma-delta ADCs. Hogenauer has than the recursive and about 3.7 times faster than the described the design procedures for decimation and non-recursive CIC filters.

Investigation of Multiphase Power Converter using Integrated Coupled Inductor Regarding Electric Vehicle Application

The challenge of reducing carbon emission and achieving emission target until 2050, has become a key development strategy of energy distribution for each country. The automotive industries, as the important portion of implementing energy requirements, are making some related researches to meet energy requirements and customer requirements. For modern energy requirements, it should be clean, green and renewable. For customer requirements, it should be economic, reliable and long life time. Regarding increasing requirements on the market and enlarged customer quantity, EVs and PHEV are more and more important for automotive manufactures. Normally for EVs and PHEV there are two important key parts, which are battery package and power electronics composing of critical components. A rechargeable battery is a quite important element for achieving cost competitiveness, which is mainly used to story energy and provide continue energy to drive an electric motor. In order to recharge battery and drive the electric motor, power electronics group is an essential bridge to convert different energy types for both of them. In modern power electronics there are many different topologies such as non-isolated and isolated power converters which can be used to implement for charging battery. One of most used converter topology is multiphase interleaved power converter, pri- marily due to its prominent advantages, which is frequently employed to obtain optimal dynamic response, high effciency and compact converter size. Concerning its usage, many detailed investigations regarding topology, control strategy and devices have been done. In this thesis, the core research is to investigate some branched contents in term of issues analysis and optimization approaches of building magnetic component. This work starts with an introduction of reasons of developing EVs and PEHV and an overview of different possible topologies regarding specific application requirements. Because of less components, high reliability, high effciency and also no special safety requirement, non-isolated multiphase interleaved converter is selected as the basic research topology of founded W-charge project for investigating its advantages and potential branches on using optimized magnetic components. Following, all those proposed aspects and approaches are investigated and analyzed in details in order to verify constrains and advantages through using integrated coupled inductors. Furthermore, digital controller concept and a novel tapped-inductor topology is proposed for multiphase power converter and electric vehicle application.

Thermal Noise Behavior of the Bridge Circuit

This paper considers a connection between the deterministic and noisy behavior of nonlinear networks. Specifically, a particular bridge circuit is examined which has two possibly nonlinear energy storage elements. By proper choice of the constitutive relations for the network elements, the deterministic terminal behavior reduces to that of a single linear resistor. This reduction of the deterministic terminal behavior, in which a natural frequency of a linear circuit does not appear in the driving-point impedance, has been shown in classical circuit theory books (e.g. [1, 2]). The paper shows that, in addition to the reduction of the deterministic behavior, the thermal noise at the terminals of the network, arising from the usual Nyquist-Johnson noise model associated with each resistor in the network, is also exactly that of a single linear resistor. While this result for the linear time-invariant (LTI) case is a direct consequence of a well-known result for RLC circuits, the nonlinear result is novel. We show that the terminal noise current is precisely that predicted by the Nyquist-Johnson model for R if the driving voltage is zero or constant, but not if the driving voltage is time-dependent or the inductor and capacitor are time-varying

El Full de Ruta dels estudis de Pedagogia a Girona

Els estudis de pedagogia de la Universitat de Girona s’han dotat d’un Full de Ruta. El document el composen dotze eixos de treball que són ambiciosos però que, els redactors, consideren necessaris en un moment en què el pedagog ha traspassat l’àmbit escolar per diversificar la seva actuació cap a altres àmbits com són el social, el cultural, el de la comunicació o el laboral

Full label space reduction in MPLS networks: asymmetric merged tunneling

Traffic Engineering objective is to optimize network resource utilization. Although several works have been published about minimizing network resource utilization in MPLS networks, few of them have been focused in LSR label space reduction. This letter studies Asymmetric Merged Tunneling (AMT) as a new method for reducing the label space in MPLS network. The proposed method may be regarded as a combination of label merging (proposed in the MPLS architecture) and asymmetric tunneling (proposed recently in our previous works). Finally, simulation results are performed by comparing AMT with both ancestors. They show a great improvement in the label space reduction factor

Análisis del Proyecto Mesoaméricano y su incidencia en la integración de la Región Centroaméricana y Colombia : Período de Estudio 2001-2007

El Proyecto Mesoamericano es un proyecto de integración entre los países de Mesoamerica; es decir, que es una integración entre los nueves Estados del Sureste de México (Campeche, Chiapas, Guerrero, Oaxaca, Puebla, Quintana Roo, Tabasco, Veracruz y Yucatán)y los territorios de Guatemala, El Salvador, Belice, Honduras, Nicaragua, Costa Rica y Panamá. Aunque a partir del 2006 Colombia ingresó con todos los derechos de participación. El proyecto busca principalmente aumentar la calidad de vida de los habitantes potencializando el desarrollo económico, reduciendo la pobreza, aumentando el capital humano y natural de la región, dentro de un contexto de respeto a la diversidad cultural, étnica e inclusión social. Para esto el Proyecto Mesoamericano se ha dividido en 9 Iniciativas las cuales a cada país le corresponde desarrollar cada una. Es por esto que a México le correspondió desarrollar la Iniciativa de Desarrollo Humano; a Belice la iniciativa de Turismo; a Guatemala la Iniciativa Energética; a El Salvador, Telecomunicaciones; a Costa Rica, Transporte; a Honduras Facilitación Comercial y Competitividad; a Nicaragua, Desarrollo Sostenible; a Panamá, Prevención y Mitigación de Desastres Naturales y finalmente a Colombia le correspondió desarrollar el tema de los biocombustibles. estas Iniciativas todas tienen la misma importancia pero a diferencia de las otras; la Iniciativa Energética es la más desarrollada y ejecutada hasta el momento por ser la más grande; entre sus proyectos están: El Sistema de Interconexión Eléctrica SIEPAC, la Interconexión Eléctrica entre México y Guatemala, la Interconexión Eléctrica entre Panamá y Colombia, el Proyecto de Biocombustibles y las Energías Renovables. Esta Iniciativa ha hecho que la integración entre los países de la región se afiance mucho más. Aunque todavía existe mucho rechazo por parte de la población campesina e indígena por el temor a perder sus recursos naturales y que estos sean privatizados. De igual forma Colombia es muy importante para el proyecto puesto que Colombia geoestratégicamente es el puente entre Centroamérica y Suramérica y es un factor clave para el Proyecto Mesoamericano.

Full text library resources 2010-11

Finding journal articles from full text sources such as IEEEXplore, ACM and LNCS (Lecture Noters in Computer Science)

Full Text Library Resources for INFO1010

These slides support students in understanding how to respond to the challenge of: "I’ve been told not to use Google or Wikipedia to research my essay. What else is there?" The powerpoint guides students in how to identify high quality, up to date and relevant resources on the web that they can reliably draw upon for their academic assignments. The slides were created by the subject liaison librarian who supports the School of Electronics and Computer Science at the University of Southampton, Fiona Nichols.

Feedback Toolbox (full screen)

This toolbox contains information for students about how they can use feedback at the University of Southampton to improve their marks and enjoy their courses more. The toolbox also contains practical information about academic appeals, as well as a user's guide to delivering effective peer feedback.

Mòdul del Full de càlcul Excel. 'Módulo de la hoja de cálculo Excel'.

Resumen tomado de la publicación. Incluye capturas de pantalla de ordenador de dicho editor de cálculo y ficheros para la realización de las actividades prácticas

Introducció al full de càlcul OpenOffice.org Calc. 'Introducción a la hoja de cálculo OpenOffice.org Calc'.

Resumen tomado de la publicación. Incluye imágenes de captura de pantalla de la herramienta estudiada. Se adjuntan ficheros de prácticas realizadas durante el curso

Modification of personality variables through application of a psycho-educational program of full consciousness (mindfulness) in university students

This study examines the effects in university students of a psycho-educational program in full awareness (mindfulness) on certain personality variables. A quasi-experimental (group comparison) design with pretest and postest measurements was employed in an experimental (n = 26) and a control group (n = 27). Barratt impulsiveness Scale (BiS- 11), Acceptance and Action Questionnaire (AAQ), Social Avoidance and Distress Scale (SAD), and the Profile of Mood States (POMS) were applied to experimental and control groups. The results show statistically significant changes in impulsivity variables, experiential avoidance, social avoidance, social anxiety, tension and fatigue when comparing the posttest mean scores of the groups.