Otimização da caracterização de fibras musculares estriadas em cão (Canis familiaris) por histoquímica e imunohistoquímica com potencial aplicação ao diagnóstico

Dissertação de Mestrado Integrado em Medicina Veterinária

Síntese de Biosílica em fibras de policaprolactona, produzidas por electrospinning, a partir da imobilização de Cys-tag Silicateína-α

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

A problemática das cochonilhas-algodão em cultura protegida de hortícolas na Região Oeste

Mestrado em Engenharia Agronómica - Horto-fruticultura e Viticultura - Instituto Superior de Agronomia - UL

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Efeito da adição de fibras da palma do licuri (syagrus coronata) no comportamento físico e mecânico de compósitos de matriz cimentícia

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Formulação e análise de desempenho de UHPC reforçado com fibras não metálicas

A evolução dos betões, na procura de estruturas com um maior tempo de vida útil, melhor desempenho ou menores custos de manutenção, tem sido alvo de pesquisa por investigadores de todo o mundo. Neste sentido, o desenvolvimento dos betões de ultra-elevado desempenho (UHPC – Ultra High Performance Concrete), permitiu, desde o seu desenvolvimento inicial, uma multiplicidade de aplicações quer a nível estrutural ou arquitetónico, aportando a estes elementos, vantagens características deste material de construção. No entanto, e particularizando um dos seus constituintes, a aplicação tradicional de fibras metálicas na composição de UHPC, poderá originar alguns fenómenos indesejados de perda de durabilidade, nomeadamente por corrosão destas. Por consequência, julga-se pertinente encontrar alternativas a este componente, de forma a que se obtenha um nível de desempenho semelhante, diminuindo o risco de ocorrência dos fenómenos anteriormente referidos. Neste sentido, o estudo que aqui se apresenta, visa efetuar uma breve abordagem à aplicação de fibras em materiais alternativos tais como fibra de vidro ou fibra de polipropileno. Serão analisadas algumas propriedades em estado fresco e endurecido de várias misturas de betão, com diferentes aplicações de fibras, quer em tipo, quer em dosagem.

Avaliação dos teores de óleo de algodão colorido BRS Rubi e Safira em relação ao algodão tradicional.

2007

Degradação da proteína Cry1Ac de Bacillus thuringiensis por bactérias de solo de cultura do algodão transgênico e convencional (Gossypium hirsutum).

2009

Resultados do ensaio nacional de cultivares do algodoeiro herbáceo nas condições do Cerrado - safra 2013/2014.

Após a Helicoverpa armigera ser identificada no Brasil, os produtores passaram a ter que conviver com uma nova e importante praga da cotonicultura. Para conviver com essa praga e outros lepidópteros e facilitar o manejo de plantas daninhas, os programas de melhoramento genético que atuam no Brasil disponibilizaram ao mercado novas cultivares transgênicas resistentes a lepidópteros e a herbicidas. Contudo, para que a transgenia visando ao controle de lepidópteros seja sustentável em longo prazo, é imprescindível o uso de áreas de refúgio, que nada mais são do que áreas comerciais cultivadas sem a presença do evento para resistência a pragas. Por isso, foram disponibilizadas ao mercado cultivares convencionais e transgênicas com resistência a herbicidas, visando atender à demanda dessas áreas.Essa grande quantidade de novas cultivares disponíveis no mercado tem ocasionado dificuldades para os produtores e consultores em fazerem suas escolhas. Uma vez que, além da resistência às pragas e a herbicidas, é necessário que essas cultivares tenham bom desempenho agronômico, aliado à qualidade de fibras exigida pela indústria têxtil. Nesse sentido, esta publicação pode auxiliar o produtor de algodão brasileiro a fazer a escolha da cultivar mais adequada à sua região e ao manejo adotado na propriedade.

Panel prefabricado a base de fibras naturales

En este trabajo de investigación, se diseñó y desarrollo un panel prefabricado para aplicaciones arquitectónicas, compuesto por fibras naturales. El panel fue elaborado a partir de una mezcla de fibras vegetales de tamo de arroz y cabuya, con partículas de arena silícea, los cuales, están aglomerados con una resina de silicato de sodio. La mezcla de estos materiales tiene buenas propiedades de trabajabilidad, compactación y con la aplicación de dióxido de carbono CO2, esta mezcla se solidifica rápidamente. Esta técnica, facilita el proceso de producción en serie de los paneles prefabricados de fibras naturales. A través del moldeo con una prensa manual, se obtuvo paneles con buenas propiedades y características de resistencia, módulo de ruptura, densidad y contenido de humedad; además de tener medidas modulares, texturas de agradable aspecto superficial y criterios de reversibilidad. Los paneles también presentan favorables cualidades de aislamiento térmico y acústico. Sus aplicaciones y utilidades son para revestimiento en espacios interiores de: muros, cielo raso y tabiquería liviana o decorativa. Finalmente se generó una propuesta de instalación de los paneles, utilizando de igual forma recursos renovables y sostenibles.

O ouro branco abre caminho: o algodão e a modernização do espaço urbano da Cidade da Parahyba (1850-1924)

The present research deals with the modernization process of the Cidade da Parahyba2, between 1850 and 1924, and its relation with the cotton economy, which represented the main source of wealth accumulation for both the private and the public sectors throughout the First Republic. This study on urban history was developed by focusing on the understanding of the city s spatial formation, and despite its emphasis on the economic aspects involved, other factors that also contribute to the development of the social life were not put aside. The modernization process of the Cidade da Parahyba was also analyzed during the period established for the study according to a chronological and thematic approach that established comparisons with the financial situation of the State, whenever this was necessary, with special attention to the contribution of the cotton economy to the State´s revenues. It was possible to detect a lack of financial help and loans from the federal and municipal administrations for finishing several public works already underway in the capital, since the federal funds allocated to the State of Parahyba do Norte were rather employed in emergency works against droughts and in agricultural development. One can then conclude that the financial resources required for the urban interventions were withdrawn from the State s treasury itself, resources that were collected mainly from activities such as cotton exportation and cotton trading. Another factor shows the interdependence between the urban remodeling and the cotton economy: during the years marked by great droughts or by hard plagues on the cotton plantations, cotton production decreased, as well as the State s finances. The first measures taken by the State s administrators were to halt all projects of urban remodeling in progress in the Cidade da Parahyba, which was, clearly, the most privileged city by the State s presidents during the period analyzed. 2 The city of João Pessoa was named Cidade da Parahyba, a designation that remained until September 1930, when it received its present-day name in order to pay homage to the president of the State, João Pessoa Cavalcanti de Albuquerque, murdered in the city of Recife in August of that same year. At that time, the State of Paraíba was known as Parahyba do Norte. Since this work is limited to a period of time comprised within the First Republic, the names employed respect the terms used in those days

Celulose proveniente de fibras alternativas: uma solução viável?

2015