Frontex and the respect of fundamental rights: from better protection to full responsibility. EPC Policy Brief, 3 June 2014

The European Agency for the Management of Operational Cooperation at the External Borders of the Member States of the European Union (Frontex) was created to improve border management cooperation between Member States. Seen from its inception as a security-oriented body, tools and rules have been gradually developed to enhance the human rights dimension and protection regarding Frontex activities. However, this step has not been accompanied with the explicit recognition of Frontex’s legal responsibility regarding violations of human rights occurring during joint operations it coordinates. Despite Frontex position rejecting such a responsibility, it is no longer clear whether this position can be maintained, as Yves Pascouau and Pascal Schumacher demonstrate in this Policy Brief.

A novel phantom and method for comprehensive 3-dimensional measurement and correction of geometric distortion in magnetic resonance imaging

A phantom that can be used for mapping geometric distortion in magnetic resonance imaging (MRI) is described. This phantom provides an array of densely distributed control points in three-dimensional (3D) space. These points form the basis of a comprehensive measurement method to correct for geometric distortion in MR images arising principally from gradient field non-linearity and magnet field inhomogeneity. The phantom was designed based on the concept that a point in space can be defined using three orthogonal planes. This novel design approach allows for as many control points as desired. Employing this novel design, a highly accurate method has been developed that enables the positions of the control points to be measured to sub-voxel accuracy. The phantom described in this paper was constructed to fit into a body coil of a MRI scanner, (external dimensions of the phantom were: 310 mm x 310 mm x 310 mm), and it contained 10,830 control points. With this phantom, the mean errors in the measured coordinates of the control points were on the order of 0.1 mm or less, which were less than one tenth of the voxel's dimensions of the phantom image. The calculated three-dimensional distortion map, i.e., the differences between the image positions and true positions of the control points, can then be used to compensate for geometric distortion for a full image restoration. It is anticipated that this novel method will have an impact on the applicability of MRI in both clinical and research settings. especially in areas where geometric accuracy is highly required, such as in MR neuro-imaging. (C) 2004 Elsevier Inc. All rights reserved.

Identification of two evolutionarily conserved and functional regulatory elements in intron 2 of the human BRCA1 gene

Cross-species comparative genomics is a powerful strategy for identifying functional regulatory elements within noncoding DNA. In this paper, comparative analysis of human and mouse intronic sequences in the breast cancer susceptibility gene (BRCA1) revealed two evolutionarily conserved noncoding sequences (CNS) in intron 2, 5 kb downstream of the core BRCA1 promoter. The functionality of these elements was examined using homologous-recombination-based mutagenesis of reporter gene-tagged cosmids incorporating these regions and flanking sequences from the BRCA1 locus. This showed that CNS-1 and CNS-2 have differential transcriptional regulatory activity in epithelial cell lines. Mutation of CNS-1 significantly reduced reporter gene expression to 30% of control levels. Conversely mutation of CNS-2 increased expression to 200% of control levels. Regulation is at the level of transcription and shows promoter specificity. Both elements also specifically bind nuclear proteins in vitro. These studies demonstrate that the combination of comparative genomics and functional analysis is a successful strategy to identify novel regulatory elements and provide the first direct evidence that conserved noncoding sequences in BRCA1 regulate gene expression. (c) 2005 Elsevier Inc. All rights reserved.

The relationship of adult attachment to emotion, catastrophizing, control, threshold and tolerance, in experimentally-induced pain

Although insecure attachment has been associated with a range of variables linked with problematic adjustment to chronic pain, the causal direction of these relationships remains unclear. Adult attachment style is, theoretically, developmentally antecedent to cognitions, emotions and behaviours (and might therefore be expected to contribute to maladjustment). It can also be argued, however, that the experience of chronic pain increases attachment insecurity. This project examined this issue by determining associations between adult attachment characteristics, collected prior to an acute (coldpressor) pain experience, and a range of emotional, cognitive, pain tolerance, intensity and threshold variables collected during and after the coldpressor task. A convenience sample of 58 participants with no history of chronic pain was recruited. Results demonstrated that attachment anxiety was associated with lower pain thresholds; more stress, depression, and catastrophizing; diminished perceptions of control over pain; and diminished ability to decrease pain. Conversely, secure attachment was linked with lower levels of depression and catastrophizing, and more control over pain. Of particular interest were findings that attachment style moderated the effects of pain intensity on the tendency to catastrophize, such that insecurely attached individuals were more likely to catastrophize when reporting high pain intensity. This is the first study to link attachment with perceptions of pain in a pain-free sample. These findings cast anxious attachment as a vulnerability factor for chronic pain following acute episodes of pain, while secure attachment may provide more resilience. (c) 2006 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

The effect of copper toxicity on the growth and root morphology of Rhodes grass (Chloris gayana Knuth.) in resin buffered solution culture

A solution culture experiment was conducted to examine the effect of Cu toxicity on Rhodes grass (Chloris gayana Knuth.), a pasture species used in mine-site rehabilitation. The experiment used dilute, solution culture to achieve external nutrient concentrations, which were representative of the soil solution, and an ion exchange resin to maintain stable concentrations of Cu in solution. Copper toxicity was damaging to plant roots, with symptoms ranging from disruption of the root cuticle and reduced root hair proliferation, to severe deformation of root structure. A reduction in root growth was observed at an external Cu concentration of < 1 mu M, with damage evident from an external concentration of 0.2 mu M. Critical to the success of this experiment, in quantitatively examining the relationship between external Cu concentration and plant response, was the use of ion exchange resin to buffer the concentration of Cu in solution. After some initial difficulty with pH control, stable concentrations of Cu in solution were maintained for the major period of plant growth. The development of this technique will facilitate future investigations of the effect of heavy metals on plants.

Do Australian public sector employees have the type of culture they want in the era of new public management?

New public management theory proposes that public sector organisations should be managed more like private sector organisations. It is therefore expected that public sector managers will have preferences for an organisational culture that will reflect the culture of private sector organisations, with an external rather than internal orientation. The current research investigated the idea that managers' perceptions of ideal organisational culture would be different to the bureaucratic model of culture (internally oriented), which has traditionally been associated with public sector organisations. Responses to a competing values culture inventory were received from 925 public sector employees. Results indicated that the bureaucratic model is still pervasive; however, managers prefer a culture that is more external, and less control focussed, as expected. Lower level employees expressed a desire for a culture that emphasised human relations values.

Evaluation of Melanotaenia duboulayi (Atheriniformes : Melanotaeniidae), Hypseleotris galii (Perciformes : Eleotridae), and larvicide Vectolex (R) WG (Bacillus sphaericus) for integrated control of Culex annulirostris

Australian freshwater fish species Melanotaenia duboulayi and Hypseleotris galii were selected for a small plot field evaluation of an integrated pest management strategy using native fish and VectoLex® WG (Bacillus sphaericus) for the control of Culex annulirostris Skuse, the principal freshwater vector of arbovirus Ross River virus in Australia. When tested alone, the level of control afforded by M. duboulayi and H. galii was highly dependent on the prerelease density of mosquito larvae; and even when stocking rates as high as 10 g per pond (>30 kg/ha) were used, larval abundance was too high to attain adequate control from fish alone. In contrast, treatment with VectoLex WG at 500 g/ha resulted in 100% mortality of Cx. annulirostris immatures, but no residual activity was evident. The delayed reduction of Cx. annulirostris immatures in ponds stocked with fish alone, and the recolonization by Cx. annulirostris in ponds after treatment with B. sphaericus, did not occur when both treatments were combined.

'Looking good, feeling better': Consumption, Control and the Aesthetics of Exclusivity in the Service Encounter

The majority of ‘service’ literature has focused on the production side of service work (i.e. employees and management), while treating the role of the customer and/or consumer as secondary (Korczynski and Ott, 2004). Those authors who have addressed the role consumption plays in shaping and maintaining individuals' self- identity have tended to overemphasize the dominance of consumer culture in shaping ‘our consciousness’ (Ritzer, 1999), with little in the way of empirical evidence to support these assertions. This paper develops the conceptualization of service work and consumer culture literature, by placing more emphasis on the customer in the service encounter. Using an ethnographic study of a ‘high class’ department store, this paper addresses employee and customer identity and the nature of managerial, employee and customer control within this ‘exclusive’ context. Of particular interest is how employees and customer’s ‘embody’ this control. Using Bourdieu’s (1986) conception of class and habitus, the concept of exclusivity goes beyond the management /service worker dyad by providing a means of investigating identity control by the organization over both customers and service workers. However, an organization’s exclusivity is not a closed normative pursuit of control, and shows this enterprise is part of a contested terrain, while revealing the ambiguity and ‘openness’ of control practices and pursuits. In order to uphold the ideal of exclusivity, management, service workers and customers must all engage in a precarious quest for establishing and maintaining a sense of control and/or identity. This paper demonstrates the continuing contradiction between bureaucratic practices of control and consumer culture, and highlights the need for research that investigates the context -dependent nature of control in service-related and consumer studies.

Examining a key aspect of agency-to-business relationships:the effects of regulatory control on the satisfaction of regulated firms

This paper studies an overlooked, but highly important relationship, the relationship that exists between regulatory agencies (e.g., the EPA, OSHA, and the FDA) and the for-profit businesses they attempt to govern. Drawing on business-to-business control and satisfaction research, a framework is developed to understand how regulatory control influences the satisfaction levels of customer firms. Regulatory control is disaggregated into four distinct facets: the controlling agency, the rules and regulations of control, the processes used by the agency to apply the regulations, and sanctions. Each facet is hypothesized to have an effect on satisfaction. A regulator's administration of state food safety regulations provides the empirical context for testing the hypotheses. Results from a survey of 173 restaurants provide empirical support for the conceptual model. Most importantly, the study finds that the informal control process increases customer satisfaction, while the formal control process decreases customer satisfaction. We discuss how these and other findings may contribute to more effective agency-to-business relationships and ongoing research.

Transforming the eastern neighbourhood: the security implications of European Union Activity in Ukraine 2000-2006

This thesis examines the external activities of the European Union conducted in the wider Europe against the backdrop of eastern enlargement. It focuses on the technical aspects of EU diplomacy, using qualitative research methodology to study the programmes and initiatives launched since the year 2000 in the countries lying along the Union’s new border to the east. Drawing on evidence from Ukraine, it hypothesises that the EU is an agent of transformation in the eastern neighbourhood and that this transformation has important implications for the regional order in the post-Soviet space. The thesis constitutes an investigation into the transformational activities engaged by the EU in Ukraine conducted with an eye to their strategic implications. It documents and analyses three instances of EU intervention in Ukraine’s internal processes that relate to management of cross-border traffic in the Ukrainian-Russian borderland, restructuring of the country’s energy sector, and conduct of its contentious presidential election in 2004. It is argued that while these interventions have explicitly sought to advance the Union’s security with respect to certain twenty-first century transnational threats, they have at the same time served to confer important strategic advantages on the EU that include giving the bloc greater knowledge and control over developments in Ukraine and that contribute to the dismantling of infrastructural, institutional and other ties between Kiev and the other Soviet successor states, notably Russia. The effect of the European Union’s actions in the region, whether intended or not, has thus been to undermine any competing regional initiatives that cut across its own functions, and thereby to assert itself as the primary integration project in Europe. By showing how technical interventions in the politics, economics and administration of Ukraine can yield important geopolitical dividends, this thesis demonstrates that, in the context of EU external relations, high and low politics are interlinked.

When do firms conform? The effect of regulatory control processes on compliance and opportunism

The authors use social control theory to develop a conceptual model that addresses the effectiveness of regulatory agencies’ (e.g., Food and Drug Administration, Occupational Safety and Health Administration) field-level efforts to obtain conformance with product safety laws. Central to the model are the control processes agencies use when monitoring organizations and enforcing the safety rules. These approaches can be labeled formal control (e.g., rigid enforcement) and informal control (e.g., social instruction). The theoretical framework identifies an important antecedent of control and the relative effectiveness of control’s alternative forms in gaining compliance and reducing opportunism. Furthermore, the model predicts that the regulated firms’ level of agreement with the safety rules moderates the relationships between control and firm responses. A local health department’s administration of state food safety regulations provides the empirical context for testing the hypotheses. The results from a survey of 173 restaurants largely support the proposed model. The study findings inform a discussion of effective methods of administering product safety laws. The authors use social control theory to develop a conceptual model that addresses the effectiveness of regulatory agencies’ (e.g., Food and Drug Administration, Occupational Safety and Health Administration) field-level efforts to obtain conformance with product safety laws. Central to the model are the control processes agencies use when monitoring organizations and enforcing the safety rules. These approaches can be labeled formal control (e.g., rigid enforcement) and informal control (e.g., social instruction). The theoretical framework identifies an important antecedent of control and the relative effectiveness of control’s alternative forms in gaining compliance and reducing opportunism. Furthermore, the model predicts that the regulated firms’ level of agreement with the safety rules moderates the relationships between control and firm responses. A local health department’s administration of state food safety regulations provides the empirical context for testing the hypotheses. The results from a survey of 173 restaurants largely support the proposed model. The study findings inform a discussion of effective methods of administering product safety laws.

Pragmatic approach to the development of robust real-time protocols

This research is concerned with the development of distributed real-time systems, in which software is used for the control of concurrent physical processes. These distributed control systems are required to periodically coordinate the operation of several autonomous physical processes, with the property of an atomic action. The implementation of this coordination must be fault-tolerant if the integrity of the system is to be maintained in the presence of processor or communication failures. Commit protocols have been widely used to provide this type of atomicity and ensure consistency in distributed computer systems. The objective of this research is the development of a class of robust commit protocols, applicable to the coordination of distributed real-time control systems. Extended forms of the standard two phase commit protocol, that provides fault-tolerant and real-time behaviour, were developed. Petri nets are used for the design of the distributed controllers, and to embed the commit protocol models within these controller designs. This composition of controller and protocol model allows the analysis of the complete system in a unified manner. A common problem for Petri net based techniques is that of state space explosion, a modular approach to both the design and analysis would help cope with this problem. Although extensions to Petri nets that allow module construction exist, generally the modularisation is restricted to the specification, and analysis must be performed on the (flat) detailed net. The Petri net designs for the type of distributed systems considered in this research are both large and complex. The top down, bottom up and hybrid synthesis techniques that are used to model large systems in Petri nets are considered. A hybrid approach to Petri net design for a restricted class of communicating processes is developed. Designs produced using this hybrid approach are modular and allow re-use of verified modules. In order to use this form of modular analysis, it is necessary to project an equivalent but reduced behaviour on the modules used. These projections conceal events local to modules that are not essential for the purpose of analysis. To generate the external behaviour, each firing sequence of the subnet is replaced by an atomic transition internal to the module, and the firing of these transitions transforms the input and output markings of the module. Thus local events are concealed through the projection of the external behaviour of modules. This hybrid design approach preserves properties of interest, such as boundedness and liveness, while the systematic concealment of local events allows the management of state space. The approach presented in this research is particularly suited to distributed systems, as the underlying communication model is used as the basis for the interconnection of modules in the design procedure. This hybrid approach is applied to Petri net based design and analysis of distributed controllers for two industrial applications that incorporate the robust, real-time commit protocols developed. Temporal Petri nets, which combine Petri nets and temporal logic, are used to capture and verify causal and temporal aspects of the designs in a unified manner.

Computer control of machines utilising independent drive mechanisms

The thesis describes an investigation into methods for the specification, design and implementation of computer control systems for flexible manufacturing machines comprising multiple, independent, electromechanically-driven mechanisms. An analysis is made of the elements of conventional mechanically-coupled machines in order that the operational functions of these elements may be identified. This analysis is used to define the scope of requirements necessary to specify the format, function and operation of a flexible, independently driven mechanism machine. A discussion of how this type of machine can accommodate modern manufacturing needs of high-speed and flexibility is presented. A sequential method of capturing requirements for such machines is detailed based on a hierarchical partitioning of machine requirements from product to independent drive mechanism. A classification of mechanisms using notations, including Data flow diagrams and Petri-nets, is described which supports capture and allows validation of requirements. A generic design for a modular, IDM machine controller is derived based upon hierarchy of control identified in these machines. A two mechanism experimental machine is detailed which is used to demonstrate the application of the specification, design and implementation techniques. A computer controller prototype and a fully flexible implementation for the IDM machine, based on Petri-net models described using the concurrent programming language Occam, is detailed. The ability of this modular computer controller to support flexible, safe and fault-tolerant operation of the two intermittent motion, discrete-synchronisation independent drive mechanisms is presented. The application of the machine development methodology to industrial projects is established.

Functional characterization of GABAergic pallidopallidal and striatopallidal synapses in the rat globus pallidus in vitro

As a central integrator of basal ganglia function, the external segment of the globus pallidus (GP) plays a critical role in the control of voluntary movement. Driven by intrinsic mechanisms and excitatory glutamatergic inputs from the subthalamic nucleus, GP neurons receive GABAergic inhibitory input from the striatum (Str-GP) and from local collaterals of neighbouring pallidal neurons (GP-GP). Here we provide electrophysiological evidence for functional differences between these two inhibitory inputs. The basic synaptic characteristics of GP-GP and Str-GP GABAergic synapses were studied using whole-cell recordings with paired-pulse and train stimulation protocols and variance-mean (VM) analysis. We found (i) IPSC kinetics are consistent with local collaterals innervating the soma and proximal dendrites of GP neurons whereas striatal inputs innervate more distal regions. (ii) Compared to GP-GP synapses Str-GP synapses have a greater paired-pulse ratio, indicative of a lower probability of release. This was confirmed using VM analysis. (iii) In response to 20 and 50 Hz train stimulation, GP-GP synapses are weakly facilitatory in 1 mm external calcium and depressant in 2.4 mm calcium. This is in contrast to Str-GP synapses which display facilitation under both conditions. This is the first quantitative study comparing the properties of GP-GP and Str-GP synapses. The results are consistent with the differential location of these inhibitory synapses and subtle differences in their release probability which underpin stable GP-GP responses and robust short-term facilitation of Str-GP responses. These fundamental differences may provide the physiological basis for functional specialization.

Differential localization of GABAA receptor subunits in relation to rat striatopallidal and pallidopallidal synapses

As a central integrator of basal ganglia function, the external segment of the globus pallidus (GP) plays a critical role in the control of voluntary movement. The GP is composed of a network of inhibitory GABA-containing projection neurons which receive GABAergic input from axons of the striatum (Str) and local collaterals of GP neurons. Here, using electrophysiological techniques and immunofluorescent labeling we have investigated the differential cellular distribution of a1, a2 and a3 GABAA receptor subunits in relation to striatopallidal (Str-GP) and pallidopallidal (GP-GP) synapses. Electrophysiological investigations showed that zolpidem (100 nm; selective for the a1 subunit) increased the amplitude and the decay time of both Str-GP and GP-GP IPSCs, indicating the presence of the a1 subunits at both synapses. However, the application of drugs selective for the a2, a3 and a5 subunits (zolpidem at 400 nm, L-838,417 and TP003) revealed differential effects on amplitude and decay time of IPSCs, suggesting the nonuniform distribution of non-a1 subunits. Immunofluorescence revealed widespread distribution of the a1 subunit at both soma and dendrites, while double- and triple-immunofluorescent labeling for parvalbumin, enkephalin, gephyrin and the ?2 subunit indicated strong immunoreactivity for GABAAa3 subunits in perisomatic synapses, a region mainly targeted by local axon collaterals. In contrast, immunoreactivity for synaptic GABAAa2 subunits was observed in dendritic compartments where striatal synapses are preferentially located. Due to the kinetic properties which each GABAAa subunit confers, this distribution is likely to contribute differentially to both physiological and pathological patterns of activity.