Effects of feeding corn silage inoculated with microbial additives on the ruminal fermentation, microbial protein yield, and growth performance of lambs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of dietary energy concentration on performance parameters and egg quality of white leghorn laying hens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigação experimental da tenacidade em tubos de aço API 5L X70 soldados pelo processo HF/ERW

Studies about structural integrity are very important when it desires to prevent disasters associated with flaws inherent in materials used in structural components. The welded joints in steel pipes used to conduction and distribution of oil and gas correspond to the regions most susceptible to flaw. Aiming to contribute to this research line, the present study was designed to assess experimentally the structural integrity of welded joints in steel pipes API 5L X70 used in pipeline systems. This assessment is given from tests of CTOD, whose aim is simulate in laboratory the real behaviour of crack from of his propagation on the welded joint obtained by high frequency electric resistance welding. In this case, the analyses are performed from specimens SE(B) obtained directly of steel pipe API 5L X70. The proposed methodology involves tests of CTOD at lower temperature, in order to assess the toughness of material in critical operation conditions. From performance of CTOD tests, was possible assess the toughness of welded joints in terms of quantity through CTOD parameter and in terms of quality from behaviour of curve load versus CMOD. In this study, also, sought to compare CTOD’s results obtained through rules ASTM E1820 (2008) and BS 7448 (1991). Although the two standards cited previously have adopted different parameters to calculated the value of CTOD, concluded that the values of CTOD tend to converge for a common value

Influência do exercício prévio pesado na performance aeróbia de curta duração realizada com diferentes estratégias de distribuição da intensidade em indivíduos treinados e não treinados no ciclismo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Terminalia catappa L.: A medicinal plant from the Caribbean pharmacopeia with anti-Helicobacter pylori and antiulcer action in experimental rodent models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

6-Dimethylaminopurine and cyclohexamide are mutagenic and alter reproductive performance and intrauterine development in vivo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Intestinal integrity and performance of broiler chickens fed a probiotic, a prebiotic, or an organic acid

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of cucumber hybrids cultivated in coconut fiber and soil

The objective of this work was to evaluate the performance of three Japanese group cucumber hybrids, which were cultivated in two cultivation systems. The experiment was designed in a split-plot randomized block design with two cultivation systems (coconut fiber and soil) for commercial Japanese cucumber hybrids ('Tsuyataro', 'Yoshinari' and 'Nankyoku'). After harvesting the cucumbers, we evaluated the number of marketable fruits per plant, the average fruit length, the mean fruit diameter, the bottom fruit diameter, the marketable production of fruits per plant and the marketable yield per hectare. There were significant interactions between the cultivation system and the hybrid, as indicated by the number of marketable fruits. The Nankyoku hybrid had the highest average (14.54 fruits pl(-1)), although it did not differ from the Yoshinari hybrid when grown in coconut fiber. In soil culture, the Yoshinari hybrid had the highest average number of fruits per plant (10.12 fruits pl(-1)) and did not differ from the Tsuyataro hybrid. Cultivation in coconut fiber provided better results for production traits and plant productivity. 'Yoshinari' and 'Nankyoku' were the most productive hybrids. Based on the cucumber cultivation results from a protected environment, the cultivation of hybrid Japanese cucumbers and Yoshinari and Nankyoku hybrids in coconut fiber is recommended.

Pre-task music improves swimming performance

The purpose of this study was to investigate the effects of pre--task music on swimming performance and other psychological variables. A randomized counterbalanced within--subjects (experimental and control condition) design was employed. Eighteen regional level male swimmers performed two 200m freestyle swimming time trials. Participants were exposed to either 5min of self--selected music (pre--task music condition) or 5min of silence (control condition) and, after 1 minute, performed the swimming task. Swimming time was significantly shorter (--1.44%) in the pre--task music condition. Listening to pre--task music increased motivation to perform the swimming task, while arousal remained unchanged. While fatigue increased after the swimming task in both conditions, vigour, ratings of perceived exertion and affective valence were unaltered. It is concluded, for the first time, that pre--task music improves swimming performance.

Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubri-refrigeração

Pós-graduação em Engenharia Mecânica - FEB

Abordagem experimental da força de atrito em aulas de Física do Ensino Médio

In this paper we propose and describe the performance of an experimental activity to address the concept of friction in High School Physics practical classes. We use a low-cost and simple construction device that enables the determination of the coefficient of static friction between two materials through three different procedures. The results were coherent, with small percentage deviation, which gives reliability to the activity and can stimulate discussions in class. The activity also allows greater contextualization of concepts that are usually discussed only theoretically, requiring a higher abstraction level of the students. This can stimulate discussions and greater interaction between teacher and students.

Experimental and numerical study of heat transfer in hot machined workpiece using infrared radiation

One of the greatest problems found in machining is related to the cutting tool wear. A way for increasing the tool life points out to the development of materials more resistant to wear, such as PCBN inserts. However, the unit cost of these tools is considerable high, around 10 to 20 times compared to coated carbide insert, besides its better performance occurs in high speeds requiring modern machine tools. Another way, less studied is the workpiece heating in order to diminish the shear stress material and thus reduce the machining forces allowing an increase of tool life. For understanding the heat transfer influences by conduction in this machining process, a mathematical model was developed to allow a simplified numerical simulation, using the finite element method, in order to determine the temperature profiles inside the workpiece.

Animal performance, feeding behaviour and carcass traits of feedlot cattle diet fed with agro-industrial by-product as fat source

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agronomic performance of peach trees grown in subtropical region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of different rubber tree clones against South American leaf blight (Microcyclus ulei)

This study was aimed to evaluate the behaviour of eighteen clones of Hevea brasiliensis (rubber) against South American leaf blight and tostudy progress of the disease. The experiment was conducted in Cachoeiro de Itapemirim-ES, where 18 clones were evaluated. The experi-mental design was a randomized block with four replicates; each experimental unit consisted of three plants. Evaluations were performed at15-day intervals on 30 leaflets per tree. Disease incidence was quantified and infection classified according to the stages of development andtype of damage. Leaf blight occurred during the entire experimental period; however, disease intensity varied with the resistance level of theclones and the time of year. Clones FX 3864, RRIM 725, RRIM 711, IAC 300 and IAN 873 exhibited the highest resistance to leaf blight.