Recuperação de povoamento de Eucalyptus urophylla com aplicações de nitrogênio, potássio e calcário dolomítico

A plantation of Eucalyptus urophylla, established in 1984 on a Quartzpsamment Soil, at Altinopolis, São Paulo State, presented in 1989 an medium increment of the cylindrical volume of the trees of 13.97 m 3/ha/year and also showed deficiency symptoms of potassium, calcium and magnesium. At 4.33 years after planting were applied two doses of nitrogen (0 and 10 g/tree of N), potassium (0 and 20 g/tree of K 2O) and of dolomitic lime (0 and 500 g/tree), combined in a randomized block design arranged in a factorial way (2 × 2 × 2), with four replications, in order to study the recuperation of the tree growth rate. Evaluations of the trees growth were performed at 4.33, 5.67, 6.75 and at 7.58 years when cutting the plantation was done. The soil fertility and leaf concentrations of N, K, Ca and Mg were analyzed before and after the application of the treatments. The accumulation and distribution of biomass and of these nutrients in the tree components and in the litter, and the economic studies referring to the volumes of wood were also evaluated 7.58 years after planting. Potassium fertilization increased the mass of potassium in stemwood, stembark, foliage, fruits and litter, but the increase was greater in foliage and in the stembark. Liming increased the mass of magnesium in stemwood, stembark, foliage and litter, but the increase was greater in the litter. There was no isolated effect of nitrogen fertilization. The growth rate of trees was recovered with the potassium application, which increased the mean annual increment (MAI) of cylindrical volume from 13.85 m 3/ha/year without fertilizer to 16.82 m 3/ha/year. At 7.58 years after planting, there was observed an effect of the N x K x dolomitic lime interaction in the wood production. In the absence of nitrogen and dolomitic lime, the application of potassium increased the real volume of 43% and there was a gain of US$ 86.79/ha.

Estimativas de parâmetros genéticos para caracteres quantitativos em progênies de polinização aberta de Eucalyptus urophylla

Eucalyptus urophylla S. T. Blake is outstanding for valuable wood production potential, adaptation plasticity for different environmental conditions, and for tolerance to canker. However, genetic improvement of this specie in Brazil depends on the existence of genetic variability in the introduced populations. The objective of this study was to investigate the genetic variation and gains in quantitative traits in a population established in 1992 in Selvíria - MS. The progeny trial was established in a partially balanced, 8 x 8 lattice design, with 64 families, collected at Anhembi Experimental Station (IPEF/ESALQ/USP). Each plot was made up of eight trees planted in a 3 × 3 m spacing. Significant among families genetic variations were observed in diameter at breast height (DBH), bark type, stem form, and survival. Estimates of average family heritability were high for all traits, ranging from 0.50 to 0.85. The simulated selection by using multi-effect index showed that under a varying number of plants per family. This method is the most indicated to maximize genetic gains (7.24%) and the effective population size (69.3). These results are a useful support for the transformation of this test into a seedling seed orchard and to become a source of vegetative material to build a clonal seed orchard.

Identificação de regiões relacionadas ao déficit hídrico em Eucalyptus por meio de marcadores moleculares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimativas de parâmetros genéticos para caracteres quantitativos em progênies de Eucalyptus urophylla S. T. Blake

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variabilidade genética em progênies de Eucalyptus urophylla S. T. Blake para carvão vegetal

Pós-graduação em Ciência Florestal - FCA

Biologia de Gonipterus scutellatus (Coleoptera: Curcu- lionidae) em Eucalyptus spp. em diferentes temperaturas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biomass yield and calorific value of six clonal stands of Eucalyptus urophylla S. T. Blake cultivated in Northeastern Brazil

A demanda mundial por energia limpa e sustentável tem aumentado nos últimos anos. Uma das alternativas é a biomassa, incluindo os plantios florestais, com destaque, no Brasil, para o gênero Eucalyptus spp., que, atualmente, possui diversos clones selecionados para a produção de energia. Em razão da diferença na adaptação dos clones aos diferentes ambientes, há necessidade de estudos específicos para avaliar a produção de energia para determinada região. Objetivou-se, neste estudo, determinar dentre seis clones de Eucalyptus urophylla S. T. Blake analisados, aqueles com maior potencial para a produção de biomassa e energia para a região Centro Sul do Maranhão (Grajaú). Os clones foram avaliados com 41 meses de idade, plantados em espaçamento de 4 x 3 m, e distribuídos em delineamento inteiramente casualizado, com cinco repetições. Cada parcela experimental era composta por 100 árvores. Foram determinadas a produção e a alocação de biomassa de cada parte da árvore e o poder calorífico de casca e do lenho. Dos seis clones estudados, dois se destacaram tanto na produção de biomassa, quanto para a geração de energia, sendo superiores em até 27 % em comparação com o clone de menor rendimento.

Variabilidade genética em progênies de polinização aberta de Eucalyptus urophylla

Pós-graduação em Ciência Florestal - FCA

Mycelial growth of two Lentinula edodes strains in culture media prepared with sawdust extracts from seven eucalyptus species and three eucalyptus clones

The in vitro mycelial growth of Lentinula edodes strains LE-95/01 and LE-96/18 were evaluated in solid culture media prepared with sawdust extracts from seven eucalyptus species (E. saligna, E. grandis, E. urophylla, E. pellita, E. paniculata, E. citriodora, and E. camaldulensis) and three eucalyptus clones (E. grandis × E. urophylla hybrids). Evaluations were made every 48 hours by means of colony diameter measurements (mean of four transversely-oriented measurements), during ten days of incubation in the dark at 25ºC ±1°C. The experimental design consisted of randomized blocks, and treatment means were compared by Tukey test. The culture medium prepared from E. citriodora sawdust extract was the most promising to grow L. edodes strains LE-96/18 and LE-95/01. L. edodes strain LE-96/18 presented the fastest mycelial growth after incubation for ten days, regardless of sawdust extract type used in the culture medium.

Qualidade da madeira e da celulose de clones de Eucalyptus spp. de diferentes densidades

Pós-graduação em Ciência Florestal - FCA

Productivity, stability and adaptability in open pollination progenies of Eucalyptus urophylla ST Blake

Prediction of genetic gains within breeding programs is not always compatible with those observed in practice. One reason for this inconsistency is the lack of knowledge of genotype-environment interaction (GxE). The aim of this study was to estimate genetic variation, evaluate the GxE, investigate the genetic correlation between pairs of environments and for the set, and to study the productivity, stability and adaptability at 2 years of age for diameter at breast height (DBH) in five progenies trials of Eucalyptus urophylla, used in a randomized complete block design, with the number of progenies ranging from 138 to 167, four to eight blocks and five to six plants per plot. Estimates of variance components and genetic parameters were obtained using the REML/BLUP method. For analysis of productivity, stability and adaptability, the HMRPGV method was used. The highest DBH growth was observed in Anhembi (10.52 cm) and Uberaba (10.20 cm). Estimates considered high were obtained for the coefficient of individual additive genetic variation (>13.3%) and average heritability among progenies (>0.40), indicating the possibility of obtaining genetic gains by selection among progenies. The coefficient of determination of the GxE was 1.7%, a fact that led to a high value of genotypic correlation between the performance of the progenies and environments (78.1%), indicating that the interaction is simple. The first six progenies showed a coincidence of 100% in the order of stability (HMGV), adaptability (RPGV) and productivity (HMRPGV), being 13% higher than the overall mean of five experiments (9.21 cm). When ordering the progenies, the selection of the 20 best in growth led to an increase in gain ranging of from 10.4 to 70%. Anhembi is the ideal place to have a breeding population which will be good in the other places as well.

IBA application for rooting of Eucalyptus benthamii Maiden and Cambage x Eucalyptus dunnii Maiden minicuttings

IBA application for rooting of Eucalyptus benthamii Maiden and Cambage x Eucalyptus dunnii Maiden minicuttings. Eucalyptus has great importance in the forestry sector and many advances in the area of improvement have been achieved with the advent of biotechnological techniques. However, some promising genotypes still do not have multiplication protocols with cloning techniques, such as minicutting. The study aimed to evaluate IBA concentrations for survival, rooting and vegetative vigor of E. benthamii x E. dunnii minicuttings, and determine the maximum technical efficiency dose. Ministumps H12, H19 and H20 clones were cultivated in a clonal minigarden under a semi-hydroponic system. For rooting, the rninicutting basal portion was plunged in hydro-alcoholic solutions, whose concentrations were: 0; 2,000; 4,000; 6,000 and 8,000 mg L(-1) of IBA. The experiment was conducted in a completely randomized design, with the factors consisting of three clones and five IBA concentrations, with five replications, containing 10 minicuttings per replication. IBA positively influenced the minicutting rooting processes, with differentiated behavior between the clones, with 30.32 to 55.45% rooting variation. The positives increments occurred until the highest IBA concentration for H12 and H19 clones. However, the range between 4,000 and 6,000 mg L(-1) of IBA treatments promoted the best rooting results for the H20 clone.

X ray densitometry applied to technological evaluation of MDF panels of eucalyptus

MDF panels from eucalyptus wood fibers were manufactured in laboratory and industrial production and had their apparent density profile determined by X-ray densitometry. The MDF panels apparent density parameters (maximum density of the superior and inferior faces; medium and minimum density) were determined and compared. The results indicated that the density values of the MDF panels made in the laboratory and in industrial line did not show significant statistical differences, indicating the similarities in the pressing phase of the fibers of both kinds. However, for MDF panels of laboratory and production line, the values of maximum, mean and minimum densities showed statistically significant correlations. The determination of the density profile for MDF panels by X-ray densitometry is important for the evaluation of pressing phase and other variables of the industrial process of production, as well for the determination of the technological properties.

DOSES OF INDOLBUTYRIC ACID IN THE ROOTING AND GROWTH OF EUCALYPT CUTTINGS (Eucalyptus urophylla)

This work aimed to evaluate the effect of different concentrations of IBA (indolbutyric acid) in the rooting and growth of Eucalyptus urophylla cuttings. The experimental design used was the randomized blocks, in factorial with an arrangement of split plots, with three concentrations of IBA (2.000; 5.000 and 8.000 mg L(-1)), two ways of the application of plant gowth regulators (paste and powder), and three period of evaluations (30, 45 and 60 days). The experiment was carried out in the Farm Buriti de Prata, an entreprise property of Souza Cruz, in the city of Prata - MG in 2003. After the preparation of the cuttings, patterned in 10 cm of length and 0.8 cm of diameter, those were immersed in mixtures of IBA for 10 seconds, in the forms of dry powder and paste and than planted in plastic tubes contening Plantmax substrate with vermiculite. The cuttings were transported to greenhouse with controled humidity, where they remained for 60 days. The variables studied were: height of plant in the 30(th), 45(th) and 60(th) days after seeding; fresh mass of the aerial part and roots. The IBA applied in powder form as well as in paste form, resulted in an greater seedling growth. To the 60 days, the seedlings presented greater growth, being significantly superior to the heights measured in other times of evaluation. The application of 2.000 mg L(-1) and 5,000 mg L(-1) resulted in significant increases on weight of fresh mass of the aerial part and root system.

BIOLOGIA DE Nystalea nyseus (CRAMER, 1775) (LEPIDOPTERA: NOTODONTIDAE) EM FOLHAS de Eucalyptus urophylla

Essa pesquisa foi conduzida no laboratório de Entomologia Florestal da Universidade Federai de Viçosa à 25 ± 2" C, 60 ± 10% UR e fotoperiodo de 12L:12E. O objetivo foi estudar a biologia de Nystalea nyseus(Cramer, 1775) (Lepidoptera: Notodontidae) em folhas de Eucalyptus urophylla. Ν. nyseusapresentou cinco estádios, com duração, média, de 3,99 ± 0,11; 3,80 ±0,10; 4,95 ± 0,30; 5,96 ±0,21 e 6,85 ±0,14 dias, respectivamente. A duração total da fase larval foi de 25,5 dias. A fase de pré-pupa teve duração de 3,05 ± 0,05; 3,08 ± 0,06 dias e a de pupa 14,75 ± 0,45 c 13,82 ± 0,29 dias para machos e fêmeas, respectivamente. A viabilidade, dos ovos, foi de 74,72% e o período embrionário de 3,40 ± 0,16 dias. A longevidade de adultos, acasalados, foi de 6,71 ± 0,74 dias para machos e 9,14 ± 0,96 dias para fêmeas e razão sexual de 0,55, ou seja uma fêmea para 0,81 macho.