Reproducibility of aortic intima-media thickness in infants using edge-detection software and manual caliper measurements

Background: Aortic intima-media thickness measured by transabdominal ultrasound (aIMT) is an intermediate phenotype of cardiovascular risk. We aimed to (1) investigate the reproducibility of aIMT in a population-derived cohort of infants; (2) establish the distribution of aIMT in early infancy; (3) compare measurement by edge-detection software to that by manual sonographic calipers; and (4) assess the effect of individual and environmental variables on image quality. Methods. Participants were term infants recruited to a population-derived birth cohort study. Transabdominal ultrasound was performed at six weeks of age by one of two trained operators. Thirty participants had ultrasounds performed by both operators on the same day. Data were collected on environmental (infant sleeping, presence of a sibling, use of sucrose, timing during study visit) and individual (post-conception age, weight, gender) variables. Two readers assessed image quality and measured aIMT by edge-detection software and a subset by manual sonographic calipers. Measurements were repeated by the same reader and between readers to obtain intra-observer and inter-observer reliability. Results: Aortic IMT was measured successfully using edge-detection in 814 infants, and 290 of these infants also had aIMT measured using manual sonographic calipers. The intra-reader intra-class correlation (ICC) (n = 20) was 0.90 (95% CI 0.76, 0.96), mean difference 1.5 μm (95% LOA -39, 59). The between reader ICC using edge-detection (n = 20) was 0.92 (95% CI 0.82, 0.97) mean difference 2 μm (95% LOA -45.0, 49.0) and with manual caliper measurement (n = 290) the ICC was 0.84 (95% CI 0.80, 0.87) mean difference 5 μm (95% LOA -51.8, 61.8). Edge-detection measurements were greater than those from manual sonographic calipers (mean aIMT 618 μm (50) versus mean aIMT 563 μm (49) respectively; p < 0.001, mean difference 44 μm, 95% LOA -54, 142). With the exception of infant crying (p = 0.001), no associations were observed between individual and environmental variables and image quality. Conclusion: In a population-derived cohort of term infants, aIMT measurement has a high level of intra and inter-reader reproducibility. Measurement of aIMT using edge-detection software gives higher inter-reader ICC than manual sonographic calipers. Image quality is not substantially affected by individual and environmental factors. © 2014 McCloskey et al.; licensee BioMed Central Ltd.

Magical realism and irony's 'edge': rereading magical realism and Kim Scott's Benang

Magical realism has been the subject of much earnest theorising, implicating the narrative mode in postcolonial projects of cultural regeneration not only in Latin America but around the world. The claim that its hybrid vision simultaneously transgresses and supplements Western ratiocinative epistemologies has seen the mode become over-determined and dismissed as a postcolonial cliche. Rarely noted, however, is the ironic nature of the literary mode. Yet the trademark representation of the magical in a realist narrative is marked by a conspicuous incongruity, which is not only necessary to magical realism's aesthetic effect but which also provides a strong incentive for ironic readings. This paper will reread magical realism through Kim Scott's Benang in order to recognise the ironic incongruity at play in magical realism and to revitalise the mode's 'edge'.

Finding the edge: online persona creation in fringe art forms

This study investigates the experience of persona creation by eight artists working in fringe art forms. The research demonstrates that for these artists, the online persona can operate in three registers of performance—professional, personal, and intimate—and in creating their personas, participants draw on socio-cultural discourses of artistness.

Built-up edge mechanisms in the machining of duplex stainless steels

 The thesis work was aimed at resolving long established issues with difficult-to-machine materials. The main thesis contribution, is the academic community now has a better understanding of how the issue of built-up edge is occurring when machining duplex stainless steel alloys, which will aid in the machining sector.

Resource distribution influences positive edge effects in a seagrass fish

According to conceptual models, the distribution of resources plays a critical role in determining how organisms distribute themselves near habitat edges. These models are frequently used to achieve a mechanistic understanding of edge effects, but because they are based predominantly on correlative studies, there is need for a demonstration of causality, which is best done through experimentation. Using artificial seagrass habitat as an experimental system, we determined a likely mechanism underpinning edge effects in a seagrass fish. To test for edge effects, we measured fish abundance at edges (0-0.5 m) and interiors (0.5-1 m) of two patch configurations: continuous (single, continuous 9-m2 patches) and patchy (four discrete 1-m2 patches within a 9-m2 area). In continuous configurations, pipefish (Stigmatopora argus) were three times more abundant at edges than interiors (positive edge effect), but in patchy configurations there was no difference. The lack of edge effect in patchy configurations might be because patchy seagrass consisted entirely of edge habitat. We then used two approaches to test whether observed edge effects in continuous configurations were caused by increased availability of food at edges. First, we estimated the abundance of the major prey of pipefish, small crustaceans, across continuous seagrass configurations. Crustacean abundances were highest at seagrass edges, where they were 16% greater than in patch interiors. Second, we supplemented interiors of continuous treatment patches with live crustaceans, while control patches were supplemented with seawater. After five hours of supplementation, numbers of pipefish were similar between edges and interiors of treatment patches, while the strong edge effects were maintained in controls. This indicated that fish were moving from patch edges to interiors in response to food supplementation. These approaches strongly suggest that a numerically dominant fish species is more abundant at seagrass edges due to greater food availability, and provide experimental support for the resource distribution model as an explanation for edge effects.

Integrating edge effects into studies of habitat fragmentation: a test using meiofauna in seagrass

Habitat fragmentation is thought to be an important process structuring landscapes in marine and estuarine environments, but effects on fauna are poorly understood, in part because of a focus on patchiness rather than fragmentation. Furthermore, despite concomitant increases in perimeter:area ratios with fragmentation, we have little understanding of how fauna change from patch edges to interiors during fragmentation. Densities of meiofauna were measured at different distances across the edges of four artificial seagrass treatments [continuous, fragmented, procedural control (to control for disturbance by fragmenting then restoring experimental plots), and patchy] 1 day, 1 week and 1 month after fragmentation. Experimental plots were established 1 week prior to fragmentation/disturbance. Samples were numerically dominated by harpacticoid copepods, densities of which were greater at the edge than 0.5 m into patches for continuous, procedural control and patchy treatments; densities were similar between the edge and 0.5 m in fragmented patches. For taxa that demonstrated edge effects, densities exhibited log-linear declines to 0.5 m into a patch with no differences observed between 0.5 m and 1 m into continuous treatments. In patchy treatments densities were similar at the internal and external edges for many taxa. The strong positive edge effect (higher densities at edge than interior) for taxa such as harpacticoid copepods implies some benefit of patchy landscapes. But the lack of edge effects during patch fragmentation itself demonstrates the importance of the mechanisms by which habitats become patchy.

Finding a Life on the Edge: Two decades after mountaineer Bill Holland was lost in a fall, his daughter revisits his days on Mayflower Hill

Two decades after mountaineer Bill Holland ’72 was lost in a fall, his daughter retraces his steps on Mayflower Hill.

Disorder effects produced by the Mn and H incorporations on the optical absorption edge of Ga1-xMnxAs:H nanocrystalline films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The optical absorption edge of nanocrystalline Ga(1-x)Mn(x)N films deposited by reactive sputtering

We have focused on the optical absorption edge of nanocrystalline Ga(1-x)Mn(x)N (0.00 <= x <= 0.18) films deposited by reactive RF magnetron sputtering. The films obtained are nanocrystalline with grain sizes of about 25 nm, having wurtzite structure and strong orientation texture in the c-axis direction. The optical characterizations of the absorption edges were obtained in the 190-2600 nm spectral range. The increase of the Mn content causes an increase of the absorption coefficient which can be clearly noticed at low energies, and a quasi-linear decrease of the optical gap. Broad absorption bands observed around similar to 1.3 and similar to 2.2 eV were associated with transitions between the Mn acceptor level and the valence and conduction bands, respectively. The observed changes in the optical properties due to the Mn incorporation observed in these nanocrystalline films are similar to those reported for ferromagnetic GaMnN single-crystal films.

Evaluation of Bulk and Surfaces Absorption Edge Energy of Sol-Gel-Dip-Coating SnO2 Thin Films

The absorption edge and the bandgap transition of sol-gel-dip-coating SnO2 thin films, deposited on quartz substrates, are evaluated from optical absorption data and temperature dependent photoconductivity spectra. Structural properties of these films help the interpretation of bandgap transition nature, since the obtained nanosized dimensions of crystallites are determinant on dominant growth direction and, thus, absorption energy. Electronic properties of the bulk and (110) and (101) surfaces are also presented, calculated by means of density functional theory applied to periodic calculations at B3LYP hybrid functional level. Experimentally obtained absorption edge is compared to the calculated energy band diagrams of bulk and (110) and (101) surfaces. The overall calculated electronic properties in conjunction with structural and electro-optical experimental data suggest that the nature of the bandgap transition is related to a combined effect of bulk and (101) surface, which presents direct bandgap transition.

The Yang-Lee edge singularity in spin models on connected and non-connected rings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Generalized partition function zeros of 1D spin models and their critical behavior at edge singularities

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)