1000 resultados para Derivados ácidos de fósforo
Resumo:
Brucite (Mg(OH)2) is a structural model of several natural layered minerals as well as of synthetic layered double hydroxides (LDH). Exchange reaction studies of these compounds are well documented in the literature but surface chemical modifications, especially for brucite, are quite rare. We report the behaviour of brucite in reaction with succinic and benzoic acid in different solvents and temperatures. The compounds were analysed through X-ray diffraction (XRD) and infrared spectroscopy (FTIR). The surfaces of brucite crystals were grafted producing expansions, attributed to the arrangement of the grafted species between the layers.
Resumo:
Products resulting from the ethoxylation of hydroxylated compounds, especially water and ethanol, are of great commercial importance. This work presents several aspects concerning the catalytic reactions of ethylene oxide, a chemical substance used in the production of a wide variety of products. Mechanisms of ethoxylation, distribution of products, formation of undesired by-products and perspectives for new processes using heterogeneous catalysis are also reviewed and discussed.
Resumo:
Sialic acids are nine-carbon carbohydrates that occur widely in nature and occupy the terminal portions of some glycoproteins and glycolipids of cell membranes. These carbohydrates are closely involved in cell-cell interactions and in processes such as microbial infection, inflammation, etc. Studies on the participation of sialic acids in biological processes have provided comprehension about their role in the infection by the influenza virus, the causal agent of flu. In this article, we present an overview of the importance of sialic acids in the influenza virus infection and how the knowledge of their involvement in this process has allowed the development of selective and efficient drugs against the virus.
Resumo:
The TBA test is essential to quality control of fat-containing food, being the test most applied to evaluate lipid peroxidation in fishery, meat and poultry products. It estimates malonaldehyde, a secondary oxidation product, by reacting with 2-thiobarbituric acid, forming a coloured complex, measured spectrophotometrically atlambda = 532 nm. Results are expressed as mg malonaldehyde per kg sample or frequently as "TBA value". There are four ways of quantifying it: by lipid extraction, direct heating, distillation or heat-acid extraction. This review intends to point out traditional, modified and alternative TBA test methods, besides enumerating advantages and drawbacks of each one.
Resumo:
Platinum (II) complexes, for example, cisplatin and carboplatin, have been used as chemotherapeutic agents for the treatment of various types of cancer. Several other complexes of this metallic ion are also under clinical evaluation. This work describes the synthesis of five new platinum (II) complexes having furan and 5-nitrofuran derivatives and chloride as ligands. The compounds were characterized by NMR, IR and elemental analysis.
Resumo:
Two ortho-iodoallyloxybenzoates, methyl 4-O-allyl-2,3-di-O-benzyl-6-O-(2-iodobenzoyl)- alpha-D-glucopyranoside (3) and methyl 4-O-allyl-2,3-di-O-benzyl-6-O-(2-iodobenzoyl)- alpha-D-galactopyranoside (4) were synthesized in seven conventional steps from methyl alpha-D-glucopyranoside and methyl alpha-D-galactopyranoside, respectively. Bu3SnH-mediated aryl radical cyclization of 3 provided exclusively the hydrogenolysis product 12. The reaction of 4 gave the reduced uncyclized product 13 and only traces of 4A, resulting from 11-endo aryl radical cyclization. In previous papers we described that in similar Bu3SnH-mediated radical reaction of ortho-iodoallyloxybenzamides, analogs of 3 and 4, we obtained macrolactams resulting from 11-endo cyclization. An hypothesis to explain the differences is presented. It was assumed that in the aryl radical formed from iodobenzamides there is a suitable conformation to cyclization, which is stabilized by an intramolecular hydrogen bond.
Resumo:
This study was developed with a soil contaminated by heavy metals, with the purpose of evaluating the action of silicon and phosphorus as protection agents through simple extractions by DTPA. The collected samples were prepared and incubated with five doses of silicon and five doses of phosphorus, with four replicates, amounting to 100 experimental units. After 30 and 60 days, samples of each treatment were collected, submitted to pH analyses and simple extraction by DTPA. The amounts of DTPA-extracted metals depended on the doses of silicon and phosphorus and on the pH. Treatments with silicon and phosphorus was efficient in decreasing the availability of heavy metals in soil.
Resumo:
Free fatty acids are a measure of evaluating fats and oils, submitted to abusive conditions, besides being a quality characteristic of edible vegetable oils. The official method of determination (AOCS Ca 5a-40, 2004) is based on titration, using phenolphthalein as an indicator. For crude and degummed oils, the titration end point is difficult to be observed due to the high level of pigments, resulting in dark solutions. In this case and others, such as self-life studies, in which sample quantities are limited, potentiometric titration may be a very good alternative.
Resumo:
A square wave voltammetric method is described for the determination of acetaldehyde using the derivatization reaction with hydrazine sulphate, based on the reduction of hydrazone generated as a product that exhibits a single well-defined peak at -1.19V in acetate buffer at pH 5. Calibration graphs were obtained from 1.0 x 10-6 mol L-1 to 10 x 10-6 mol L-1 of acetaldehyde, using a reaction time of 8 min and a hidrazine concentration of 0.02 mol L-1. The detection limit was 2.38 x 10-7 mol L-1. The method was applied satisfactorily to the determination of total aldehyde in fuel ethanol samples without any pre-treatment.
Resumo:
The present study evaluated the influence of nitrogen, phosphorus and ºBrix on the production of MSCT through a factorial design methodology and analysis of response surface. The objective was to propose a statistically significant probabilistic model for the alcoholic fermentation. In order to obtain less MSCT, the medium under fermentation needs to present low sugar concentration. It was observed that phosphorus and nitrogen, even with no significant individual effects, presented interactions with each other decreasing the production of MSCT, which improves alcohol quality.
Resumo:
In the present work three ferroin reagents were studied for the simultaneous spectrophotometric determination of iron and copper: 1,10-phenanthroline, 2,2'-bipyridine and 2,4,6-tri(2-pyridyl)-1,3,5-triazine. Effect of pH, conditions, order reagent addition, interferences, amount of reagents, lineal range, sensitivity and stability of each system were compared. The 2,4,6-tri(2-pyridyl)-1,3,5-triazine can be used for determination of iron in the presence of copper with a detection limit of 5 µg L-1 and coefficient of variation of 2.0%; However it was not possible to determine directly copper in the presence of iron with this reagent. 1,10-phenanthroline can be used for simultaneous determination of the metallic ions with detection limits of 7 and 8 mg L-1 and coefficients of variation of 1.8 and 2.3% in the determination of iron and copper, respectively. The results showed also that 2,2'-bipyridine can be used for simultaneous determination of the metallic ions with detection limits of 11 and 32 µg L-1 and coefficients of variation of 1.9 and 2.5% in the determination of iron and copper, respectively. The reagents were used for spectrophotometric determination of iron and copper in ethanol fuel.
Resumo:
This work deals with the use of the cyclometallated compound [Pd(dmba)(N3)(PPh3)] in homogeneous catalytic processes comprising the reductive N-carbonylation of nitrobenzene and p-nitrotoluene to ethyl-phenylcarbamate and ethyl-4-methylphenylcarbamate, respectively. The cyclopalladated compound was also employed in the synthesis of urea derivatives by reacting p-nitrotoluene and m-nitrotoluene, respectively, with p-toluidine and and m-chloroaniline.
Resumo:
The goal of this article is to discuss the application of comprehensive two-dimensional gas chromatography (GCxGC) to petrochemical samples. The use of GCxGC for petroleum and petroleum derivatives characterization, through group type analysis, or BTEX (benzene, toluene, ethylbenzene, xylenes), total aromatic hydrocarbons, polyaromatic hydrocarbons, sulfur-containing, oxygen-containing, and nitrogen-containing compounds is presented. The capability of GCxGC to provide additional specific chemical information regarding petroleum processing steps, such as dehydrogenation of linear alkanes, the Fischer-Tropsch process, hydrogenation and oligomerization is also described. In addition, GCxGC analyses of petrochemical biomarkers and environmental pollutants derived from petrochemicals are reported.
Resumo:
Chitin and chitosan are copolymers build from N-acetyl-D-glucosamine and D-glucosamine. The former is widely found in nature and yields the latter on deacetylation. The copolymers are being used for several purposes. Since 1977, when the First International Conference on Chitin and Chitosan was held in Boston, USA, the interest on chitin and chitosan has remarkably increased. This review emphasizes pharmaceutical applications of chitosan and its derivatives, and presents recent advances. Some therapeutical applications of these polymers are also discussed.
Resumo:
This work presents a little of the history which marked the development of the dairy industry in Brazil and in the world. It shows problems and solutions related to the preservation of milk. In general, it also describes the traditional manufacture of cheese and applications of membrane technology as an auxiliary tool in the processing of some types of cheese.