The NRA's role in wetland conservation

This is the NRA's role in wetland conservation report produced by the National Rivers Authority in 1995. This document is the third of a series of three R&D Notes produced as part of an integrated research programme addressing aspects of the NRA's role in wetland management and conservation. Chapter 1 considers the nature of the wetland resource and its definition. Chapter 2 presents the NRA's current legislative and policy framework relating to its role in wetland conservation. National and international legislation and agreements are considered, and particular attention is afforded to the potential implications of the 'Habitats Directive'. Chapter 4 presents key examples of operational casework involving wetlands. Differences in approach and external perceptions of the NRA's current and likely future role in wetland conservation are discussed within Chapter 5. Other issues highlighted in this report are: policy guidance required on NRA’s role in land drainage; standard of flood defence service for wetlands; cost-benefit analysis; strategies for halting and reversing the decline and degradation of wetland resource; and Catchment Management Planning.

Wetland resource evaluation and the NRA's role in its conservation. 1. Resource assessment

This is the Wetland resource evaluation and the NRA's role in its conservation: Resource assessment report produced by the National Rivers Authority in 1995. This R&D document provides a strategy for the assessment of the wetland resource of England and Wales. As a first step the report defines wetlands in their UK context. The following working definition is suggested: Wetland is land that has (or had until modified) a water level predominantly at, near, or up to 1.5 m above the ground surface for sufficient time during the year to allow hydrological processes to be a major influence on the soils and biota. These processes may be expressed in certain features, such as characteristic soils and vegetation. The report also summarises a hydrotopographical classification of wetlands. The report then develops a strategy for the establishment of a wetland resource Inventory based on a geographical information system (GIS) as a means of storing and manipulating site data from across England and Wales.

The sublime and its different perspective in the gothic literature

O objetivo da presente dissertação consiste em analisar o sublime, um conceito estético que vem sendo estudado desde os primeiros séculos. Tomamos como base a definição do sublime como algo paradoxal que cria o prazer e o medo ao mesmo tempo. Porém, o sublime apresenta especificidades que variam de acordo com o filósofo analisado. Neste trabalho, três críticos foram estudados: Longinus, Edmund Burke e Immanuel Kant. Assim, o sublime pode ser representado através da imensidão da natureza, do poder de uma criatura sobrenatural ou, até mesmo, através da sexualidade feminina. E, com o intuito de exemplificar essas diferentes perspectivas do sublime, buscamos obras da Literatura Gótica. Sendo esta uma vertente literária que buscava a oposição ao racionalismo trazido pelo movimento iluminista, as características sublimes foram essenciais para enfatizar a emoção. Para tal exemplificação, utilizamos trechos de dois romances góticos dos séculos XVIII e XIX, respectivamente: The Monk escrito por Matthew Lewis e Dracula escrito por Bram Stoker

Liquid crystal over silicon device characteristics for holographic projection of high-definition television images.

We discuss some fundamental characteristics of a phase-modulating device suitable to holographically project a monochrome video frame with 1280 x 720 resolution. The phase-modulating device is expected to be a liquid crystal over silicon chip with silicon area similar to that of commercial devices. Its basic characteristics, such as number of pixels, bits per pixel, and pixel dimensions, are optimized in terms of image quality and optical efficiency. Estimates of the image quality are made from the noise levels and contrast, while efficiency is calculated by considering the beam apodization, device dead space, diffraction losses, and the sinc envelope.

An atlas of reproductive development in rockfishes, genus Sebastes

The genus Sebastes consists of over 100 fish species, all of which are viviparous and long-lived. Previous studies have presented schemes on the reproductive biology of a single targeted species of the genus Sebastes, but all appear to possess a similar reproductive biology as evidenced by this and other studies. This atlas stages major events during spermatogenesis, oogenesis, and embryogenesis, including atresia, in six species of Sebastes (S. alutus, S. elongatus, S. helvomaculatus, S. polyspinis, S. proriger, and S. zacentrus). Our study suggests that the male reproductive cycle of Sebastes is characterized by 11 phases of testicular development, with 10 stages of sperm development and 1 stage of spermatozoa atresia. Ovarian development was divided into 12 phases, with 10 stages of oocyte development, 1 stage of embryonic development, and 1 stage of oocyte atresia. Embryonic development up to parturition was divided into 33 stages following the research of Yamada and Kusakari (1991). Reproductive development of all six species examined followed the developmental classifications listed above which may apply to all species of Sebastes regardless of the number of broods produced annually. Multiple brooders vary in that not all ova are fertilized and progress to embryos; a proportion of ova are arrested at the pre-vitellogenic stage. Reproductive stage examples shown in this atlas use S. elongates for spermatic development, S. proriger for oocyte development, and S. alutus for embryological development, because opportunistic sampling only permitted complete analysis of each respective developmental phase for those species. The results of this study and the proposed reproductive phases complement the recommended scheme submitted by Brown-Peterson et al. (2011), who call for a standardization of terminology for describing reproductive development of fishes.

Poverty in the fisheries, inductors, causes and intervention

The study is prompted by the poverty that persisted among the fishing communities of lake victoria at time of considerable cash inflow into the fisheries development of fish processing industry. There has been need for understanding of the poverty and what strategies would be most appreciate for it's reduction.This study has attempted to respond to the needby identifying the nature and distribution of the poverty within the fisheries lake victoria,Uganda, the factor responsible for itand the options for poverty reduction intervention. The study examined the global and regional perspectives of poverty and wealth distribution, noting that wide disparities existed between the developed and the developing world and also between the developing countries themselves. A historical review of development policies and strategies revealed that while successive strategies were able to contribute to growth, their achievement towards poverty alleviation were less than satisfactory, hence the need for continually developing new strategies. A background to Uganda’s society and economy is provided, examining the demographic, political, environmental and economic conditions of the country. Uganda’s development strategies are reviewed, highlighting the role of the Poverty Eradication Action Plan, Uganda’s main strategy for implementing the policy of poverty reduction and wealth distribution. At the agricultural sector level, the Plan for the Modernisation of Agriculture has been formulated, followed by the National Fisheries Policy, aimed at providing a policy framework for the management and development of the fisheries. An appropriate definition of poverty was formulated, considered relevant to the situation of Lake Victoria. The dimensions of poverty included inadequate basic necessities, low education and health achievements, a sense of insecurity and exposure to risk. The research methodology was enhanced by the examination of the Lélé Model of the Poverty–Environmental Degradation problem, the World Bank Model of Poverty Causation and the subsequent Lake Victoria Model developed in this study. It has provided a plan for the research, the consideration of criteria and a data collection plan. The data collection instruments included secondary data search, key informant interviews and a sample survey based on a structured questionnaire. The study identified all the four dimensions of poverty in the fisheries, provided poverty profiles with respect to the different activities, groups of people and regions in the fisheries, based on consumption poverty. Among the people identified to be in poverty were the fishing labourers, fishers of Oreochromis niloticus and those operating with non-powered boats. In the post-harvest fisheries, large proportions of processors involved in salting and sun-drying, market stall and bicycle traders were in the poverty category. The ethnic groups most affected included the Samia, Basoga and Bakenye while the Districts of Jinja, Bugiri and Busia had the highest proportions of fishers in the poverty category. With respect to the other dimensions of poverty, the study showed that educational achievement was low within the fishing communities. The health status was poor, due mainly to the prevalence of malaria, diarrhoea, bilharzia and HIV/AIDS. There was a sense of insecurity within certain sections of the fishing community, due to leadership weaknesses within the local as well as the Government institutions. Some community members operated in a state of risk because they were vulnerable to episodes of income, health and education. The causes of poverty in fisheries included weaknesses within the institutional and social environment, limitations in the technology available to the poor, resource degradation and unfavourable economic factors. The recommendations of the study for poverty reduction included strengthening of policies, developing links, improving capacities and increasing resources, to be applied at the levels of Central Government, Local Government and of the community. In view of the achievements of the methodology used on this study, involving reference to the models, it is recommended that future research should build upon this model approach, as it will continue to produce results, especially when attempting to forecast changes relating to interventions.

Occurrence of whale sharks in coastal waters in the Indian Ocean: an interesting coincidence

Salinity, temperature and pressure are parameters which govern the oceanographic state of a marine water body and together they make up density of seawater. In this contribution we will focus our interest on one of these parameters, the salinity: accuracy in relation to different purposes as well as observation technique and instrumentation. We will also discuss the definition of salinity. For example most of the Indian Ocean waters are within the salinity range from 34.60-34.80, which emphasize the importance of careful observations and clear definitions of salinity, in such a way that it is possible to define water masses and predict their movements. In coastal waters the salinity usually features much larger variation in time and space and thus less accuracy is sometimes needed. Salinity has been measured and defined in several ways over the past century. While early measurements were based on the amount of salt in a sea water sample, today the salinity of seawater is most often determined from its conductivity. As conductivity is a function of salinity and temperature, determination involves also measurement of the density of seawater is now more precisely estimated and thus the temperature. As a result of this method the Practical Salinity Scale (PSS) was developed. The best determination of salinity from conductivity and the temperature measurements gives salinity with resolution of 0.001 psu, while the accuracy of titration method was about ± 0.02‰. Because of that, even calculation of movements in the ocean is also improved.

Fracture and energy partitioning in uncooked and cooked noodles

Humans perform fascinating science experiments at home on a daily basis when they undertake the modification of natural and naturally-derived materials by a cooking process prior to consumption. The material properties of such foods are of interest to food scientists (texture is often fundamental to food acceptability), oral biologists (foods modulate feeding behavior), anthropologists (cooking is probably as old as the genus Homo and distinguishes us from all other creatures) and dentists (foods interact with tooth and tooth replacement materials). Materials scientists may be interested in the drastic changes in food properties observed over relatively short cooking times. In the current study, the mechanical properties of one of the most common (and oldest at 4,000+ years) foods on earth, the noodle, were examined as a function of cooking time. Two types of noodles were studied, each made from natural materials (wheat flour, salt, alkali and water) by kneading dough and passing them through a pasta-making machine. These were boiled for between 2-14 min and tested at regular intervals from raw to an overcooked state. Cyclic tensile tests at small strain levels were used to examine energy dissipation characteristics. Energy dissipation was >50% per cycle in uncooked noodles, but decreased by an order of magnitude with cooking. Fractional dissipation values remained approximately constant at cooking times greater than 7 min. Overall, a greater effect of cooking was on viscoplastic dissipation characteristics rather than on fracture resistance. The results of the current study plot the evolution of a viscoplastic mixture into an essentially elastic material in the space of 7 minutes and have broad implications for understanding what cooking does to food materials. In particular, they suggest that textural assessment by consumers of the optimally cooked state of food has a definite physical definition. © 2007 Materials Research Society.

Wetlands and riparian zones as buffers and critical habitats for biotic communities in Lake Victoria

Despite their ecological and socio-economic importance, Lake Victoria's adjoining "swamps" and lake interface are among the least investigated parts of the lake. The "swamps" a term commonly equated to "wastelands" and the difficult working environment they present in comparison to open water, are major factors for the low level of attention accorded to shoreline wetlands. Moreover, definitions of wetlands highlighted for example in the Ramsar Convention as "areas of marsh, fern, peatland or water, whether natural or artificial, permanent or temporary, with water that is static or flowing, fresh or brackish, or salt, including areas of marine water, the depth of which does not exceed six metres" (Ramsar, 1971) were designed to protect birds (water fowl) of international importance. The Ramsar definition, which also includes oceans, has till recently been of limited use for Lake Victoria, because itdoes not fully recognise wetlands in relation to other public concerns such as water quality, biodiversity and the tisheries that are of higher socioeconomic priority than waterfowl. Prior to 1992, fishery research on Lake Victoria included studies of inshore shallow habitats of the lake without specific reference to distance or the type of vegetation at the shore. Results of these studies also conveniently relied heavily on trawl and gill net data from the 5-10 m depth zones as the defining boundary of shallow inshore habitats. In Lake Victoria, such a depth range can be at least one kilometre from the lake interface and by the 10m depth contour, habitats are in the sub-littoral range. Findings from these studies could thus not be used to make direct inferences on the then assumed importance of Lake Victoria wetlands in general.

Face-based Selection of Corners in 3D Substructuring

In most recent substructuring methods, a fundamental role is played by the coarse space. For some of these methods (e.g. BDDC and FETI-DP), its definition relies on a 'minimal' set of coarse nodes (sometimes called corners) which assures invertibility of local subdomain problems and also of the global coarse problem. This basic set is typically enhanced by enforcing continuity of functions at some generalized degrees of freedom, such as average values on edges or faces of subdomains. We revisit existing algorithms for selection of corners. The main contribution of this paper consists of proposing a new heuristic algorithm for this purpose. Considering faces as the basic building blocks of the interface, inherent parallelism, and better robustness with respect to disconnected subdomains are among features of the new technique. The advantages of the presented algorithm in comparison to some earlier approaches are demonstrated on three engineering problems of structural analysis solved by the BDDC method.

A starting point for addressing product innovativeness in the Fuzzy Front-End

Product innovativeness is a primary contingent factor to be addressed for the development of flexible management for the front-end. However, due to complexity of this early phase of the innovation process, the definition of which attributes to customise is critical to support a contingent approach. Therefore, this study investigates front-end attributes that need to be customised to permit effective management for different degrees of innovation. To accomplish this aim, a literature review and five case studies were performed. The findings highlighted the front-end strategic and operational levels as factors influencing the front-end attributes related to product innovativeness. In conclusion, this study suggests that two front-end attributes should be customised: development activities and decision-making approach. Copyright © 2011 Inderscience Enterprises Ltd.

Re-conceptualising value in the engineering design process: The value cycle map

Introducing a "Cheaper, Faster, Better" product in today's highly competitive market is a challenging target. Therefore, for organizations to improve their performance in this area, they need to adopt methods such as process modelling, risk mitigation and lean principles. Recently, several industries and researchers focused efforts on transferring the value orientation concept to other phases of the Product Life Cycle (PLC) such as Product Development (PD), after its evident success in manufacturing. In PD, value maximization, which is the main objective of lean theory, has been of particular interest as an improvement concept that can enhance process flow logistics and support decision-making. This paper presents an ongoing study of the current understanding of value thinking in PD (VPD) with a focus on value dimensions and implementation benefits. The purpose of this study is to consider the current state of knowledge regarding value thinking in PD, and to propose a definition of value and a framework for analyzing value delivery. The framework-named the Value Cycle Map (VCM)- intends to facilitate understanding of value and its delivery mechanism in the context of the PLC. We suggest the VCM could be used as a foundation for future research in value modelling and measurement in PD.

Foresight vehicle programme - Customer understanding processes in design

Customer feedback is normally fed into product design and engineering via quality surveys and therefore mainly comprises negative comments: complaints about things gone wrong. Whilst eradication of such problems will result in a feeling of satisfaction in existing customers, it will not instil the sense of delight required to attract conquest buyers. CUPID's aim is to conceive and evaluate ideas to stimulate product desirability through the provision of delightful features and execution. By definition, surprise and delight features cannot be foreseen, so we have to understand sensory appeal and, therefore, the "hidden" voice of the customer. Copyright © 2002 Society of Automotive Engineers, Inc.

Improvements in interface design through implicit modeling

Touchscreen devices are often limited by the complexity of their user interface design. In the past, iterative design processes using representative user groups to test prototypes were the standard method for increasing the inclusivity of a given design, but cognitive modeling has potential to be an alternative to rigorous user testing. However, these modeling approaches currently have many limitations, some of which are based on the assumptions made in translating a User Interface (UI) into a definition file that cognitive modeling frameworks can process. This paper discusses these issues and postulates potential approaches to improvements to the translation procedure. © 2013 Springer-Verlag Berlin Heidelberg.

Efficient strategies for process design and optimization in ring rolling

Ring rolling is an incremental bulk forming process for the near-net-shape production of seamless rings. This paper shows how nowadays the process design and optimization can be efficiently supported by simulation methods. For reliable predictions of the material flow and the microstructure evolution it's necessary to include a real ring rolling mill's control algorithm into the model. Furthermore an approach for the online measurement of the profile evolution during the process is presented by means of axial profiling in ring rolling. Hence the definition of new ring rolling strategies is possible even for advanced geometries.