Controlled trial of multidisciplinary care teams for acutely ill medical inpatients: enhanced multidisciplinary care

Background: Acute hospital general medicine services care for ageing complex patients, using the skills of a range of health-care providers. Evidence suggests that comprehensive early assessment and discharge planning may improve efficiency and outcomes of care in older medical patients. Aim: To enhance assessment, communication, care and discharge planning by restructuring consistent, patient-centred multidisciplinary teams in a general medicine service. Methods: Prospective controlled trial enrolling 1538 consecutive medical inpatients. Intervention units with additional allied health staff formed consistent multidisciplinary teams aligned with inpatient admitting units rather than wards; implemented improved communication processes for early information collection and sharing between disciplines; and specified shared explicit discharge goals. Control units continued traditional, referral-based multidisciplinary models with existing staffing levels. Results: Access to allied health services was significantly enhanced. There was a trend to reduced index length of stay in the intervention units (7.3 days vs 7.8 days in control units, P = 0.18), with no change in 6-month readmissions. in-hospital mortality was reduced from 6.4 to 3.9% (P = 0.03); less patients experienced functional decline in hospital (P = 0.04) and patients' ratings of health status improved (P = 0.02). Additional staffing costs were balanced by potential bed-day savings. Conclusion: This model of enhanced multidisciplinary inpatient care has provided sustainable efficiency gains for the hospital and improved patient outcomes.

A randomized, controlled trial of massage therapy as a treatment for migraine

Background: Migraine is a distressing disorder that is often triggered by stress and poor sleep. Only one randomized controlled trial (RCT) has assessed the effects of massage therapy on migraine experiences, which yielded some promising findings. Purpose: An RCT was designed to replicate and extend the earlier findings using a larger sample, additional stress-related indicators, and assessments past the final session to identify longer-term effects of massage therapy on stress and migraine, experiences. Methods: Migraine sufferers (N = 47) who were randomly assigned to massage or control conditions completed daily assessments of migraine experiences and sleep patterns for 13 weeks. Massage participants attended weekly massage sessions during Weeks 5 to 10. State anxiety, heart rates, and salivary cortisol were assessed before and after the sessions. Perceived stress and coping efficacy were assessed at Weeks 4, 10, and 13. Results: Compared to control participants, massage participants exhibited greater improvements in migraine frequency and sleep quality during the intervention weeks and the 3 follow-up weeks. Trends for beneficial effects of massage therapy on perceived stress and coping efficacy were observed. During sessions, massage induced decreases in state anxiety, heart rate, and cortisol. Conclusions: The findings provide preliminary support for the utility of massage therapy as a nonpharmacologic treatment for individuals suffering from migraines.

Zinc and vitamin A supplementation in Indigenous Australian children hospitalised with lower respiratory tract infection: a randomised controlled trial

Objective: To evaluate the efficacy of supplementation with zinc and vitamin A in Indigenous children hospitalised with acute lower respiratory infection (ALRI). Design: Randomised controlled, 2-by-2 factorial trial of supplementation with zinc and vitamin A. Setting and participants: 187 Indigenous children aged < 11 years hospitalised with 215 ALRI episodes at Alice Springs Hospital (April 2001 to July 2002). Interventions: Vitamin A was administered on Days 1 and 5 of admission at a dose of 50 000 IU (infants under 12 months), or 100 000 IU; and zinc sulfate was administered daily for 5 days at a daily dose of 20 mg (infants under 12 months) or 40 mg. Main outcome measure: Time to clinical recovery from fever and tachypnoea, duration of hospitalisation, and readmission for ALRI within 120 days. Results: There was no clinical benefit of supplementation with vitamin A, zinc or the two combined, with no significant difference between zinc and no-zinc, vitamin A and no-vitamin A or zinc + vitamin A and placebo groups in time to resolution of fever or tachypnoea, or duration of hospitalisation. Instead, we found increased morbidity; children given zinc had increased risk of readmission for ALRI within 120 days (relative risk, 2.4; 95% CI, 1.003–6.1). Conclusion: This study does not support the use of vitamin A or zinc supplementation in the management of ALRI requiring hospitalisation in Indigenous children living in remote areas. Even in populations with high rates of ALRI and poor living conditions, vitamin A and zinc therapy may not be useful. The effect of supplementation may depend on the prevalence of deficiency of these micronutrients in the population.

Measurement and modelling of controlled beach groundwater levels under wave action

New laboratory scale experimental data are presented on the forcing of beach groundwater levels by wave run-up. The experimental setup simulates a coastal barrier dividing the ocean from a relatively constant back beach water level, conditions approximating a closed off lagoon system or beach aquifer. The data are critically compared to an advanced numerical model for simulating wave and beach groundwater interaction in the coastal zone, and provide the first experimental verification of such a model. Overall model-data comparisons are good, but some systematic discrepancies are apparent, and reasons for these are discussed.

Mechanical properties of sheet metal under forming conditions

In the bulge test, a sheet metal specimen is clamped over a circular hole in a die and formed into a bulge by the hydraulic pressure on one side of the specirnen. As the unsupported part of the specimen is deformed in this way, its area is increased, in other words, the material is generally stretched and its thickness generally decreased. The stresses causing this stretching action are the membrane stresses in the shell generated by the hydraulic pressure, in the same way as the rubber in a toy balloon is stretched by the membrane stresses caused by the air inside it. The bulge test is a widely used sheet metal test, to determine the "formability" of sheet materials. Research on this forming process (2)-(15)* has hitherto been almost exclusively confined to predicting the behaviour of the bulged specimen through the constitutive equations (stresses and strains in relation to displacements and shapes) and empirical work hardening characteristics of the material as determined in the tension test. In the present study the approach is reversed; the stresses and strains in the specimen are measured and determined from the geometry of the deformed shell. Thus, the bulge test can be used for determining the stress-strain relationship in the material under actual conditions in sheet metal forming processes. When sheet materials are formed by fluid pressure, the work-piece assumes an approximately spherical shape, The exact nature and magnitude of the deviation from the perfect sphere can be defined and measured by an index called prolateness. The distribution of prolateness throughout the workpiece at any particular stage of the forming process is of fundamental significance, because it determines the variation of the stress ratio on which the mode of deformation depends. It is found. that, before the process becomes unstable in sheet metal, the workpiece is exactly spherical only at the pole and at an annular ring. Between the pole and this annular ring the workpiece is more pointed than a sphere, and outside this ring, it is flatter than a sphere. In the forming of sheet materials, the stresses and hence the incremental strains, are closely related to the curvatures of the workpiece. This relationship between geometry and state of stress can be formulated quantitatively through prolateness. The determination of the magnitudes of prolateness, however, requires special techniques. The success of the experimental work is due to the technique of measuring the profile inclination of the meridional section very accurately. A travelling microscope, workshop protractor and surface plate are used for measurements of circumferential and meridional tangential strains. The curvatures can be calculated from geometry. If, however, the shape of the workpiece is expressed in terms of the current radial (r) and axial ( L) coordinates, it is very difficult to calculate the curvatures within an adequate degree of accuracy, owing to the double differentiation involved. In this project, a first differentiation is, in effect, by-passed by measuring the profile inclination directly and the second differentiation is performed in a round-about way, as explained in later chapters. The variations of the stresses in the workpiece thus observed have not, to the knowledge of the author, been reported experimentally. The static strength of shells to withstand fluid pressure and their buckling strength under concentrated loads, both depend on the distribution of the thickness. Thickness distribution can be controlled to a limited extent by changing the work hardening characteristics of the work material and by imposing constraints. A technique is provided in this thesis for determining accurately the stress distribution, on which the strains associated with thinning depend. Whether a problem of controlled thickness distribution is tackled by theory, or by experiments, or by both combined, the analysis in this thesis supplies the theoretical framework and some useful experimental techniques for the research applied to particular problems. The improvement of formability by allowing draw-in can also be analysed with the same theoretical and experimental techniques. Results on stress-strain relationships are usually represented by single stress-strain curves plotted either between one stress and one strain (as in the tension or compression tests) or between the effective stress and effective strain, as in tests on tubular specimens under combined tension, torsion and internal pressure. In this study, the triaxial stresses and strains are plotted simultaneously in triangular coordinates. Thus, both stress and strain are represented by vectors and the relationship between them by the relationship between two vector functions. From the results so obtained, conclusions are drawn on both the behaviour and the properties of the material in the bulge test. The stress ratios are generally equal to the strain-rate ratios (stress vectors collinear with incremental strain vectors) and the work-hardening characteristics, which apply only to the particular strain paths are deduced. Plastic instability of the material is generally considered to have been reached when the oil pressure has attained its maximum value so that further deformation occurs under a constant or lower pressure. It is found that the instability regime of deformation has already occurred long before the maximum pressure is attained. Thus, a new concept of instability is proposed, and for this criterion, instability can occur for any type of pressure growth curves.

The controlled release of macromolecules from macroporous hydrophyllic polymer matrices

This work has used novel polymer design and fabrication technology to generate bead form polymer based systems, with variable, yet controlled release properties, specifically for the delivery of macromolecules, essentially peptides of therapeutic interest. The work involved investigation of the potential interaction between matrix ultrastructural morphology, in vitro release kinetics, bioactivity and immunoreactivity of selected macromolecules with limited hydrolytic stability, delivered from controlled release vehicles. The underlying principle involved photo-polymerisation of the monomer, hydroxyethyl methacrylate, around frozen ice crystals, leading to the production of a macroporous hydrophilic matrix. Bead form matrices were fabricated in controllable size ranges in the region of 100µm - 3mm in diameter. The initial stages of the project involved the study of how variables, delivery speed of the monomer and stirring speed of the non solvent, affectedthe formation of macroporous bead form matrices. From this an optimal bench system for bead production was developed. Careful selection of monomer, solvents, crosslinking agent and polymerisation conditions led to a variable but controllable distribution of pore sizes (0.5 - 4µm). Release of surrogate macromolecules, bovine serum albumin and FITC-linked dextrans, enabled factors relating to the size and solubility of the macromolecule on the rate of release to be studied. Incorporation of bioactive macromolecules allowed retained bioactivity to be determined (glucose oxidase and interleukin-2), whilst the release of insulin enabled determination of both bioactivity (using rat epididymal fat pad) and immunoreactivity (RIA). The work carried out has led to the generation of macroporous bead form matrices, fabricated from a tissue biocompatible hydrogel, capable of the sustained, controlled release of biologically active peptides, with potential use in the pharmaceutical and agrochemical industries.

Controlled study into the effectiveness of individual client-centred counselling for young offenders in residential care

This study is toe first documented account in the British Isles of an evaluation of the effectiveness of client-centred counselling with young offenders in secure residential care. It is a test of Rogers' (1957) position on the 'necessary and sufficient' conditions of therapeutic personality change within a counselling relationship. Forty teenage male offenders, the subjects of Training School Orders, were randomly allocated in equal numbers to either an experimental or control group. Boys in the experimental group received weekly individual sessions of client-centred counselling over a seven month period. Boys in the control group received no formal counselling but were shown to have similar intellectual, personality, socio-economic and criminal backgrounds to those in the experimental group. It was hypothesised that counselled subjects would show more positive outcomes than control subjects over a range of measures relating to criminal behaviour and self-conception. The results indicated that the counselled subjects had a significantly lower rate of offending and a srnaller range of offences over a mean follow-up period of 2.5 years. They were also licensed from the institution significantly earlier and spent less time in custody during a one year follow-up after counselling was completed. Self-conception measures gave less clear-cut results. The direction of change towards better adjustment favoured the counselled subjects but the magnitude was often small. Those counselled subjects with most positive behaviour change tended to have significantly improved self-evaluation, less self/ideal self discrepancy and more variation on 'actual' self concept compared to pre-counselling. The results are discussed in the context of client-centred theory, methodological adequacy of the experimental design, and their application to the future treatment of young offenders in secure residential care.

Buried clay pot irrigation for efficient and controlled water delivery

This study presents water flow (WF) into soil from several pitchers buried in the soil up to their neck and filled with water,under natural atmospheric conditions for a period of two years. Variation in daily WF into soil indicated a direct correlation with moisture deficit (MD) in atmosphere. WF increases linearly with MD for non rainy days. WF without hydraulic head through all pots varied in the order air>soil>water. Base line flow in water with respect to air was < 5%. WF for pots with hydraulic head was also in the order air>soil>water, but with significant increase in WF. Hydraulic conductivity Ks was in the order air>soil>water.Ks in water was independent of MD, whereas for air and soil, Ks increased with MD. Thus total WF is partially under hydraulic head and partly due to pull effect through capillary pores on pot wall either due to MD in air or prevailing soil water tension in soil.

Astroglial expression of the P-glycoprotein is controlled by intracellular CNTF

Background - The P-glycoprotein (P-gp), an ATP binding cassette transmembrane transporter, is expressed by astrocytes in the adult brain, and is positively modulated during astrogliosis. In a search for factors involved in this modulation, P-gp overexpression was studied in long-term in vitro astroglial cultures. Results - Surprisingly, most factors that are known to induce astroglial activation in astroglial cultures failed to increase P-gp expression. The only effective proteins were IFNγ and those belonging to the IL-6 family of cytokines (IL-6, LIF, CT-1 and CNTF). As well as P-gp expression, the IL-6 type cytokines - but not IFNγ - stimulated the expression of endogenous CNTF in astrocytes. In order to see whether an increased intracellular level of CNTF was necessary for induction of P-gp overexpression by IL-6 type cytokines, by the same cytokines analysis was carried out on astrocytes obtained from CNTF knockout mice. In these conditions, IFNγ produced increased P-gp expression, but no overexpression of P-gp was observed with either IL-6, LIF or CT-1, pointing to a role of CNTF in the intracellular signalling pathway leading to P-gp overexpression. In agreement with this suggestion, application of exogenous CNTF -which is internalised with its receptor - produced an overexpression of P-gp in CNTF-deficient astrocytes. Conclusions - These results reveal two different pathways regulating P-gp expression and activity in reactive astrocytes, one of which depends upon the intracellular concentration of CNTF. This regulation of P-gp may be one of the long searched for physiological roles of CNTF.

Controlled synthesis of poly(neopentyl p-styrene sulfonate) via reversible addition-fragmentation chain transfer polymerisation

The controlled synthesis of poly(neopentyl p-styrene sulfonate) (PNSS) using RAFT polymerisation has been studied. Selected experimental conditions led to the production of PNSS with variable molecular weights and low dispersities (D{stroke}≤1.50). The controlled synthesis of poly(neopentyl p-styrene sulfonate) (PNSS) using reversible addition-fragmentation chain transfer polymerisation has been studied under a wide range of experimental conditions. PNSS can be used as an organic-soluble, thermally labile precursor for industrially valuable poly(p-styrene sulfonate), widely employed in technologies such as ionic exchange membranes and organic electronics. The suitability of two different chain transfer agents, three solvents, three different monomer concentrations and two different temperatures for the polymerisation of neopentyl p-styrene sulfonate is discussed in terms of the kinetics of the process and characteristics of the final polymer. Production of PNSS with systematically variable molecular weights and low dispersities (D{stroke} ≤1.50 in all cases) has been achieved using 2-azidoethyl 2-(dodecylthiocarbonothioylthio)-2-methylpropionate in anisole at 75°C, with an initial monomer concentration of 4.0molL-1. Finally, a poly(neopentyl p-styrene sulfonate)-b-polybutadiene-b-poly(neopentyl p-styrene sulfonate) (PNSS-b-PBD-b-PNSS) triblock copolymer has been synthesised via azide-alkyne click chemistry. Moreover, subsequent thermolysis of the PNSS moieties generated poly(p-styrene sulfonate) end blocks. This strategy allows the fabrication of amphiphilic copolymer films from single organic solvents without the need for post-deposition chemical treatment.

Identification of key temperature measurement technologies for the enhancement of product and equipment integrity in the light controlled factory

Thermal effects in uncontrolled factory environments are often the largest source of uncertainty in large volume dimensional metrology. As the standard temperature for metrology of 20°C cannot be achieved practically or economically in many manufacturing facilities, the characterisation and modelling of temperature offers a solution for improving the uncertainty of dimensional measurement and quantifying thermal variability in large assemblies. Technologies that currently exist for temperature measurement in the range of 0-50°C have been presented alongside discussion of these temperature measurement technologies' usefulness for monitoring temperatures in a manufacturing context. Particular aspects of production where the technology could play a role are highlighted as well as practical considerations for deployment. Contact sensors such as platinum resistance thermometers can produce accuracy closest to the desired accuracy given the most challenging measurement conditions calculated to be ∼0.02°C. Non-contact solutions would be most practical in the light controlled factory (LCF) and semi-invasive appear least useful but all technologies can play some role during the initial development of thermal variability models.