Spermiogenesis and ultrastructure of the spermatozoon of Wardula capitellata (Digenea, Mesometridae), an intestinal parasite of the sparid teleost Sarpa salpa in Senegal

The spermiogenesis process in Wardula capitellata begins with the formation of a differentiation zone containing two centrioles associated with striated rootlets and an intercentriolar body. Each centriole develops into a free flagellum orthogonal to a median cytoplasmic process. Later these flagella rotate and become parallel to the median cytoplasmic process, which already exhibits two electron-dense areas and spinelike bodies before its proximodistal fusion with the flagella. The final stage of the spermiogenesis is characterized by the constriction of the ring of arched membranes, giving rise to the young spermatozoon, which detaches from the residual cytoplasm. The mature spermatozoon of W. capitellata presents most of the classical characters reported in digenean spermatozoa such as two axonemes of different lengths of the 9 + '1' trepaxonematan pattern, nucleus, mitochondrion, two bundles of parallel cortical microtubules and granules of glycogen. However, some peculiarities such as two lateral expansions accompanied by external ornamentation of the plasma membrane and spinelike bodies characterize the mature sperm. Moreover, a new spermatological character is described for the first time, the so-called cytoplasmic ornamented buttons.

Influence of the feeding mechanism on deposits of square particles

In a previous paper [Hidalgo et al., Phys. Rev. Lett. 103, 118001 (2009)] it was shown that square particles deposited in a silo tend to align with a diagonal parallel to the gravity, giving rise to a deposit with very particular properties. Here we explore, both experimentally and numerically, the effect on these properties of the filling mechanism. In particular, we modify the volume fraction of the initial configuration from which the grains are deposited. Starting from a very dilute case, increasing the volume fraction results in an enhancement of the disorder in the final deposit characterized by a decrease of the final packing fraction and a reduction of the number of particles oriented with their diagonal in the direction of gravity. However, for very high initial volume fractions, the final packing fraction increases again. This result implies that two deposits with the same final packing fraction can be obtained from very different initial conditions. The structural properties of such deposits are analyzed, revealing that, although the final volume fraction is the same, their micromechanical properties notably differ.

Suuren kapasiteetin paloittelusahakonseptin kehittäminen

Asiakkaat vaativat lisää kapasiteettia ja joustavuutta eli levylinjan paloittelusahan tapauksessa pieniä palakokoja. Vaatimukseen on lähdetty vastaamaan tuotekehitysprojektilla, jonka yksi osa-alue on uuden paloittelusahan konseptin kehitys. Konseptin kehityksen lähtökohtana on ajatus terien lukumäärän lisäämisestä, terien suunnan kääntämisestä levypinkan liikesuunnan myötäiseksi, sekä terien pitämisestä paikallaan levypinkan liikkuessa niiden läpi. Tässä työssä konseptin kehitykseen kuuluu purunpoistojärjestelmä, sahattujen hukkapalojen käsittely, murskaus ja poisto, sekä levypinkan siirtomenetelmä sahauskokonaisuuden läpi. Kirjallisuusosassa on paneuduttu puulevyjen ja pyörösahauksen teoriaan. Diplomityössä on tutkittu eri pohjaratkaisujen vaikutusta kapasiteettiin, sekä vaihtoehtoja paloittelusahan eri osa-alueiden ratkaisuiksi. Lisäksi on tutkittu murskauksen tehovaatimusta vertaamalla mitattuja arvoja laskettuihin arvoihin. Tutkimuksen otannan puitteissa todettiin laskettujen arvojen johtavan reiluun moottoreiden ylimitoitukseen.

Optoelectronic studies in nanocrystalline silicon Schottky diodes obtained by Hot-Wire Chemical Vapour Deposition

The very usual columnar growth of nanocrystalline silicon leads to electronic transport anisotropies. Whereas electrical measurements with coplanar electrodes only provide information about the electronic transport parallel to the substrate, it is the transverse transport which determines the collection efficiency in thin film solar cells. Hence, Schottky diodes on transparent electrodes were obtained by hot-wire CVD in order to perform external quantum efficiency and surface photovoltage studies in sandwich configuration. These measurements allowed to calculate a transverse collection length, which must correlate with the photovoltaic performance of thin film solar cells. Furthermore, the density of charge trapped at localized states in the bandgap was estimated from the voltage dependence of the depletion capacitance of these rectifying contacts.

Tilastollisen laadunhallintatoiminnan kehittäminen selluteollisuudessa

Työn päätavoitteena oli kehittää Oy Metsä-Botnia Ab:n Rauman tehtaan tilastollista laadunhallintatoimintaa ratkaisemalla toimintatapoihin ja DNA SPC -sovelluksen syy-seurauskaavion sisältöön liittyvät ongelmat. Ensimmäinen osatavoite oli erityissyiden tilaston keräysmenetelmänä ja ongelmanratkaisun apuvälineenä käytetyn syy-seurauskaavion sisällön kehittäminen ja sen päivityksen toimintamallien luominen. Toisena osatavoitteena oli aluevastaavien SPC-viikkoraportoinnin kehittäminen ja kolmantena SPC-toiminnan aikaansaaman tehtaan suorituskykymuutoksen määrittäminen. Työn kirjallisuusosassa esiteltiin prosessien kehittämiselle tärkeät työkalut sekä tilastollisen ajattelun ja SPC:n perusperiaatteet. Kirjallisuusosassa tarkasteltiin myös SPC:n käyttöä hankaloittavia selluteollisuuden erityispiirteitä. Työssä kehitettiin syy-seurauskaaviota entistä helppokäyttöisemmäksi vaihtamalla yleisten pääluokkien tilalle ohjauskortteja vastaavat pääluokat. Syy-seurauskaavion päivitykselle ja SPC-viikkoraportoinnille luotiin tehokkaat toimintamallit. SPC-viikkoraportoinnin toimintamallin pitäisi muun muassa parantaa tiedonkulkua tehtaalla. Työssä tehtyjen tilastollisten testien mukaan Rauman tehtaan suorituskyky oli useiden mittareiden osalta parantunut SPC-toiminnan myötä. Muutaman mittarin osalta Rauman tehtaan suorituskyky oli heikentynyt SPC-toiminnan aloittamisen jälkeen.

High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

Effect of the surface charge discretization on electric double layers. A Monte Carlo simulation study

The structure of the electric double layer in contact with discrete and continuously charged planar surfaces is studied within the framework of the primitive model through Monte Carlo simulations. Three different discretization models are considered together with the case of uniform distribution. The effect of discreteness is analyzed in terms of charge density profiles. For point surface groups,a complete equivalence with the situation of uniformly distributed charge is found if profiles are exclusively analyzed as a function of the distance to the charged surface. However, some differences are observed moving parallel to the surface. Significant discrepancies with approaches that do not account for discreteness are reported if charge sites of finite size placed on the surface are considered.

1.84 micron emission of Tm3+ sensitized by Yb3+ ions in monoclinic KGd(WO4)2 single crystals

By exciting at 940 nm, we have characterized the 1.84 m near infrared emission of trivalent thulium ions in Yb3+, Tm3+:KGd WO4 2 single crystals as a function of the dopant concentration and temperature, from 10 K to room temperature. An overall 3H6 Stark splitting of 470 cm−1 for the Tm3+ ions in the Yb3+, Tm3+:KGd WO4 2 was obtained. We also studied the blue emission at 476 nm Tm3+ and the near infrared emissions at 1.48 m Tm3+ and 1 m Yb3+ as a function of the dopant concentration. Experimental decay times of the 1G4, 3H4, and 3F4 Tm3+ and 2F5/2 Yb3+ excited states have been measured as a function of Yb3+ and Tm3+ ion concentrations. For the 3F4 →3H6 transition of Tm3+ ions, we used the reciprocity method to calculate the maximum emission cross section of 3.07 10−20 cm2 at 1.84 m for the polarization parallel to the Nm principal optical direction.

Respiratory health effects of fifteen years of improved collective protection in a wheat-processing worker population.

INTRODUCTION: Occupational exposure to grain dust causes respiratory symptoms and pathologies. To decrease these effects, major changes have occurred in the grain processing industry in the last twenty years. However, there are no data on the effects of these changes on workers' respiratory health. OBJECTIVES: The aim of this study was to evaluate the respiratory health of grain workers and farmers involved in different steps of the processing industry of wheat, the most frequently used cereal in Europe, fifteen years after major improvements in collective protective equipment due to mechanisation. MATERIALS AND METHOD: Information on estimated personal exposure to wheat dust was collected from 87 workers exposed to wheat dust and from 62 controls. Lung function (FEV1, FVC, and PEF), exhaled nitrogen monoxide (FENO) and respiratory symptoms were assessed after the period of highest exposure to wheat during the year. Linear regression models were used to explore the associations between exposure indices and respiratory effects. RESULTS: Acute symptoms - cough, sneezing, runny nose, scratchy throat - were significantly more frequent in exposed workers than in controls. Increased mean exposure level, increased cumulative exposure and chronic exposure to more than 6 mg.m (-3) of inhaled wheat dust were significantly associated with decreased spirometric parameters, including FEV1 and PEF (40 ml and 123 ml.s (-1) ), FEV1 and FVC (0.4 ml and 0.5 ml per 100 h.mg.m (-3) ), FEV1 and FVC (20 ml and 20 ml per 100 h at >6 mg.m (-3) ). However, no increase in FENO was associated with increased exposure indices. CONCLUSIONS: The lung functions of wheat-related workers are still affected by their cumulative exposure to wheat dust, despite improvements in the use of collective protective equipment.

Antonio Agustín, Bologna e l’antiquaria del Cinquecento

One of the founders of numismatics in Modern Age was the archbishop of Tarragona and renowned jurist Antonio Agustín. He was educated during the mid-sixteenth century mainly in Italy, particularly in Bologna and Padua. His role in the development of antiquarian studies – and interest in collecting – ran parallel to the development of numismatics in the Cinquecento. His interest in realia , i.e., the materials and documents perceived as primary evidence of history understood in a global sense, make him a pioneer in setting the trends and methodologies which would be later employed by Bernard de Montfaucon. The period Antonio Agustín spent in Bologna, at the Reale Collegio di Spagna, between 1539 and 1544, afforded him the opportunity to enter a very cultivated circle where the admiration and study of the Antique was well established since the mid-fifteenth century. The cultural effervescence taking place in Bologna was encouraged by the court of Giovanni II Bentivoglio and the University alike. Artists also contributed to the development of antiquarian knowledge, and the painter Amico Aspertini (ca. 1475-1552) exemplifies this. It is clear that Antonio Agustín certainly benefited from the scholarly environment in Bologna during the first half of the Cinquecento, which had been firmly anchored since the fertile Quattrocento. Although the documentary evidence is scarce, and it is difficult to pinpoint the details, it is undeniable that Antonio Agustín was heavily influenced by his Bolognese experience.

Persistent random walk model for transport trough thin slabs

We present a model for transport in multiply scattering media based on a three-dimensional generalization of the persistent random walk. The model assumes that photons move along directions that are parallel to the axes. Although this hypothesis is not realistic, it allows us to solve exactly the problem of multiple scattering propagation in a thin slab. Among other quantities, the transmission probability and the mean transmission time can be calculated exactly. Besides being completely solvable, the model could be used as a benchmark for approximation schemes to multiple light scattering.

Resultados preliminares en la caracterización geométrica 3D de un litosoma arenoso de progradación deltaica mediante Georadar (GPR) (Fm. Arenisca de Roda, Eoceno, Cuenca de Graus-Tremp).

A set of GPR profiles have been recorded in order to determine the 3D geometry of a prograding delta-front sandbody (Roda sandstone formation, Eocene, Graus-Tremp basin). Common Mid Points (CMP) also have been recorded to obtain the velocity of the electromagnetic wave in ground. In order to build the topsurface of a 3D prism a set of topographic points have been acquired. Most of the GPR profiles are oriented parallel to the progradation direction (NNE-SSW) and show the expected geometries. The 3D prism has been built from the individual profiles, which shows the three dimensional geometry of the sandy lithosome.

Environmental factors in multiple sclerosis [Environmental factors in multiple sclerosis]

Although multiple sclerosis (MS) is recognized as a disorder involving the immune system, the interplay of environmental factors and individual genetic susceptibility seems to influence MS onset and clinical expression, as well as therapeutic responsiveness. Multiple human epidemiological and animal model studies have evaluated the effect of different environmental factors, such as viral infections, vitamin intake, sun exposure, or still dietary and life habits on MS prevalence. Previous Epstein-Barr virus infection, especially if this infection occurs in late childhood, and lack of vitamin D (VitD) currently appear to be the most robust environmental factors for the risk of MS, at least from an epidemiological standpoint. Ultraviolet radiation (UVR) activates VitD production but there are also some elements supporting the fact that insufficient UVR exposure during childhood may represent a VitD-independent risk factor of MS development, as well as negative effect on the clinical and radiological course of MS. Recently, there has been a growing interest in the gut-brain axis, a bidirectional neuro-hormonal communication system between the intestinal microbiota and the central nervous system (CNS). Indeed, components of the intestinal microbiota may be pro-inflammatory, promote the migration of immune cells into the CNS, and thus be a key parameter for the development of autoimmune disorders such as MS. Interestingly most environmental factors seem to play a role during childhood. Thus, if childhood is the most fragile period to develop MS later in life, preventive measures should be applied early in life. For example, adopting a diet enriched in VitD, playing outdoor and avoiding passive smoking would be extremely simple measures of primary prevention for public health strategies. However, these hypotheses need to be confirmed by prospective evaluations, which are obviously difficult to conduct. In addition, it remains to be determined whether and how VitD supplementation in adult life would be useful in alleviating the course of MS, once this disease has already started. A better knowledge of the influence of various environmental stimuli on MS risk and course would certainly allow the development of add-on therapies or measures in parallel to the immunotherapies currently used in MS.

Estudio estructural del MoO3 y sus planos cristalinos

In the present work we present geometric models of the most studied MoO3 surfaces, which were obtained using the DTMM 2.0 Molecular Modeller software. MoO3 has an orthorhombic layered structure, with each layer comprised of two interleaved planes of MoO6 octahedral. These layers are parallel to the (010) crystal plane and only oxygen ions are exposed on their surfaces. This situation results in weak van der Waals bonding between layers and in a relatively inert surface. In our approach to surface geometric structure we consider "ideal" crystal surface, in which the bulk atomic arrangement is maintained. These surfaces were generated by imaginary cleavage along appropriate planes in the bulk crystal structure.

Imaging polarimetry of the fogbow: polarization characteristics of white rainbows measured in the high Arctic

The knowledge on the optics of fogbows is scarce, and their polarization characteristics have never been measured to our knowledge. To fill this gap we measured the polarization features of 16 fogbows during the Beringia 2005 Arctic polar research expedition by imaging polarimetry in the red, green and blue spectral ranges. We present here the first polarization patterns of the fogbow. In the patterns of the degree of linear polarization p, fogbows and their supernumerary bows are best visible in the red spectral range due to the least dilution of fogbow light by light scattered in air. In the patterns of the angle of polarization α fogbows are practically not discernible because their α-pattern is the same as that of the sky: the direction of polarization is perpendicular to the plane of scattering and is parallel to the arc of the bow, independently of the wavelength. Fogbows and their supernumeraries were best seen in the patterns of the polarized radiance. In these patterns the angular distance δ between the peaks of the primary and the first supernumerary and the angular width σ of the primary bow were determined along different radii from the center of the bow. δ ranged between 6.08° and 13.41° , while σ changed from 5.25° to 19.47° . Certain fogbows were relatively homogeneous, meaning small variations of δ and σ along their bows. Other fogbows were heterogeneous, possessing quite variable δ- and σ-values along their bows. This variability could be a consequence of the characteristics of the high Arctic with open waters within the ice shield resulting in the spatiotemporal change of the droplet size within the fog