Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Síntese hidrotérmica assistida por micro-ondas de tiO2, e aplicação em nanocompósito

In recent decades have seen a sharp growth in the study area of nanoscience and nanotechnology and is included in this area, the study of nanocomposites with self-cleaning properties. Since titanium dioxide (TiO2) has high photocatalytic activity and also antimicrobial, self-cleaning surfaces in your application has been explored. In this study a comparison was made between two synthesis routes to obtain TiO2 nanoparticles by hydrothermal method assisted by microwave. And after analysis of XRD and SEM was considered the best material for use in nanocomposites. It was deposited nanocomposite film of poly (dimethyl siloxane) (PDMS) with 0.5, 1, 1.5 and 2% by weight of nanoparticles of titanium dioxide (TiO2) by the spraying method. The nanocomposite was diluted with hexane and the suspension was deposited onto glass substrate, followed by curing in an oven with forced air circulation. The photocatalytic activity of the nanocomposite impregnated with methylene blue was evaluated by UV- vis spectroscopy from the intensity variation of absorption main peak at 660nm with time of exposure to the UV chamber. Changes in the contact angle and microhardness were analyzed before and after UV aging test. The effect of ultraviolet radiation on the chemical structure of the PDMS matrix was evaluated by spectrophotometry Fourier transform infrared (FTIR).The results indicated that the addition of TiO2 nanoparticles in the coating PDMS gave high photocatalytic activity in the decomposition of methylene blue, an important characteristic for the development of self-cleaning coatings

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Correlação entre o California Mastitis Test (CMT) e a Contagem de Células Somáticas (CCS) do leite de búfalas Murrah

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An electroanalytical application of 2-aminothiazole-modified silica gel after adsorption and separation of Hg(II) from heavy metals in aqueous solution

2-Aminothiazole covalently attached to a silica gel surface was prepared in order to obtain an adsorbent for Hg(II) ions having the following characteristics: good sorption capacity, chemical stability under conditions of use, and, especially, high selectivity. The accumulation voltammetry of mercury(II) was investigated at a carbon paste electrode chemically modified with silica gel functionalized with 2-aminothiazole (SIAMT-CPE). The repetitive cyclic voltammogram of mercury(II) solution in the potential range -0.2 to + 0.6 V versus Ag/AgCl (0.02 mol L-1 KNO3; V = 20 mV s(-1)) show two peaks one at about 0.1 V and other at 0.205 V. The anodic wave peak at 0.205 V is well defined and does not change during the cycles and it was therefore further investigated for analytical purposes using differential pulse anodic stripping voltammetry in differents supporting electrolytes. The mercury response was evaluated with respect to pH, electrode composition, preconcentration time, mercury concentration, cleaning solution, possible interferences and other variables. The precision for six determinations (n = 6) of 0.02 and 0.20 mg L-1 Hg(II) was 4.1 and 3.5% (relative standard deviation), respectively. The detection limit was estimated as 0.10 mu g L-1 mercury(II) by means of 3:1 current-to-noise ratio in connection with the optimization of the various parameters involved and using the highest-possible analyser sensitivity. (c) 2006 Elsevier Ltd. All rights reserved.

Caracterização de superfícies de titânio modificado por oxidação à plasma

Recent years have seen a significant growth in surface modifications in titanium implants, resulting in shorter healing times in regions with low bone density. Among the different techniques, subtraction by chemical agents to increase oxidation has been applied for surface treatment of dental implants. However, this technique is generally unable to remove undesirable oxides, formed spontaneously during machining of titanium parts, raising costs due to additional decontamination stages. In order to solve this problem, the present study used plasma as an energy source to both remove these oxides and oxidize the titanium surface. In this respect, Ti disks were treated by hollow cathode discharge, using a variable DC power supply and vacuum system. Samples were previously submitted to a cleaning process using an atmosphere of Ar, H2 and a mixture of both, for 20 and 60 min. The most efficient cleaning condition was used for oxidation in a mixture of argon (60%) and oxygen (40%) until reaching a pressure of 2.2 mbar for 60 min at 500°C. Surfaces were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), adhesion and cell proliferation. SEM showed less cell spreading and a larger number of projections orfilopodia in the treated samples compared to the control sample. AFM revealed surface defects in the treated samples, with varied geometry between peaks and valleys. Biological assays showed no significant difference in cell adhesion between treated surfaces and the control. With respect to cell proliferation, the treated surface exhibited improved performance when compared to the control sample. We concluded that the process was efficient in removing primary oxides as well as in oxidizing titanium surfaces

Eutrofização e qualidade da água na piscicultura: consequências e recomendações

The eutrophication (cultural or anthropogenic) is induced by man and can have different origins, such as domestic sewage, industrial and agricultural activities, including the effluent still breeding systems of aquatic organisms. The expansion of aquaculture, with production of biomass and increase of nutrients in water may cause acceleration of productivity of algae, changing the ecology of aquatic systems. In addition, these waste water may present a risk to health through the transfer of pathogens from manure, plant residues, composted material, among others that are major sources of organic waste in some farming systems. Depending on the trophic level of fish ponds, which are dynamic environments, different planktonic species with short reproductive cycle and adapted to the changes contained in these systems can appear in high abundance. Water quality in the systems for raising fish is related to several factors, such as water source, management (liming, fertilizing, cleaning), cultivated species and quantity and composition of exogenous food. In order to minimize environmental impacts, there are techniques to improve the quality of water in fish farming systems and thus satisfactory answers can be obtained through the application of management practices. This paper aims to review the subject that deals with changes in water quality resulting from the activity of freshwater fish culture in Brazil. Search also recommend techniques of good management practices to minimize the impact generated by the activity.

Redução no consumo de efluente gerado em abatedouro de tilápia do nilo através da implantação de conceitos de produção mais limpa (p+l)

the nourishing industry is a segment that makes use of high water consumption due to necessity of the hygienic cleaning of the establishments and the maintenance of the good quality of the food. It enters the nourishing industries with bigger water consumption we have the fishery industry which generates effluent around 5.4 m(3). t(-1) of processed fish. This work had as objective the reduction in the water consumption of the processing of Nile tilapia through the implantation of P+L techniques, for had been in such a way carried through hydraulical alterations in the filleting tables aiming at the minimum possible water consumption for two methods of filleting, eviscerated and not eviscerated, as well as the comment of the alterations in the generated quality of the effluent one. In the present study, the reduction in the water consumption in the filleting process corresponded 98.16% for method EV considering an average time of processing of 3 hours for 32.99 kg of fish, and for method NEV the reduction was of 97.97% with average time of processing of 2.1 hours for 34.96 kg of fish, thus demonstrating that the P+L techniques are efficient for the reduction of the water consumption.

Limites e possibilidades do programa nacional de alimentação escolar enquanto estratégia de promoção da segurança alimentar e nutricional no municipio de Macaíba/RN

This dissertation aims to understand the importance of the National School Feeding as a strategy for ensuring the promotion of food and nutrition security in the municipality of Macaíba / RN, taking into account the implementation of the Law School Feeding, 11,947, 2009. The program was extended to all public basic education, youth and adults, in addition to ensuring that 30% of transfers from FNDE, were intended for the purchase of products from family farms. The survey was conducted with 160 students from public schools and farmers nesting Quilombo dos Palmares II, who produce on their land vegetables, fruits and cereals for their own consumption, for sale in local markets, in addition to providing for PNAE. The reciprocity between neighbors, such as mutual aid and sharing of common goods was noticeable in this group of farmers, since it was necessary to meet weekly deliveries of products to schools. As students, we applied a test of acceptability in two schools located in rural and in urban areas, to learn the opinion of ourselves in relation to school food consumed. It was concluded that to be most effective program in the region, there must be a better match in school menus, so that it can be attractive to students and to ensure greater use of fresh food, the main ingredient of same, practice of nutrition education in schools, to teach students the importance of food to health. In relation to local management, noted the need for adjustments bureaucratic as hiring staff for the departments, in order to be more agile in releasing payments to farmers, in addition to hiring assistants general services for schools, one Since the cooks exert dual role, the cooking while being responsible for cleaning the entire school environment. Government investments in the rural sector would be extremely valuable for farmers, since they need financial resources to purchase inputs, irrigation projects for gardens, availability of land for planting, transportation to facilitate the delivery of its products to schools and technical assistance more frequently

Da escala médica de saúde à experiência social do saudável :diálogo entre os espaços dos bares e das academias fisiculturistas na cidade do Natal-RN

Currently, we attend a reverence of concepts ahead as health, life, youth and body. In we widen amount the ideals concerned to the healthful life, to the quality of life, the longevity and joviality and the extremities of the body represented by the illness, for the virus infection, the physical deficiency and the aging. Of the historical shades of the plague, of the hunger and the war that gagged the defenseless individual and its body, in the current days we increase the search for a full and powerful life, independent of a religious imaginary to predict the epidemic curse, the threat represented for the sick people and the incarnate divine anger in the death; or of medical science presented in the spaces of the technology and the physiology, being left fragile the social and psychological dimensions of the human confined to the patient issue and, finally, the commanded urban health politics in quantitative goals of hygienic cleaning, of the medical techniques and the education citizen. For beyond these instances, emerges in our days a plural, close and biographical agreement well of the body and welfare. On the other hand, an understanding of the healthful life and well-being that more certifies the presence of something the one that clear landmarks amongst normality and the irregularity, the esteem and the destructive vice: it has a projection of healthful life measures without conceptual models of body and health under the doctor-scientific standard occidental. This thematic one will confide in way to the enclosure for spaces to the muscles and fitness exercises and the bars from the city of Natal, in the state of Rio Grande do Norte, Brazil, while comprehensive interchange concerning as the individual comes dealing with the notion the body and health and, mainly, if perceiving inside of its body and its health. Amongst these two spaces of typical leisure of the modern urban phenomenon, the hedonism bodily with its muscles and salience and one another form of hedonism in the fruition of allowed drugs will be across itself in a dialogue about which social s relationships are really in game in an imaginary construction amongst an doctor-aesthetic ideal of health and the social and subjective experience in the option for a healthful life

Efeito de herbicidas residuais, aplicados por vários anos consecutivos, na distribuição do sistema radicular da laranjeira Natal (Citrus sinensis.(L.) osbeck)

O presente trabalho foi desenvolvido com o objetivo de verificar a influência do uso contínuo de vários herbicidas residuais, sobre a distribuição das radicelas de laranjeiras Natal (Citrus sinensis (L.) Osbeck) enxertadas sobre limão Cravo (Cithus limonia Osbeck) e plantadas em janeiro de 1970. O experimento foi instalado no pomar de produção da Faculdade de Ciências Agrárias e Veterinárias do Campus de Jaboticabal (UNESP), em Latossol Roxo distrófico, com 1,6% de matéria orgânica e 51% de argila. O delineamento experimental utilizado foi o de blocos ao acaso, dentro de um esquema fatorial 11x 3x2x2, com três repetições. Os tratamentos utilizados, com as respectivas doses em kg do i.a/ha foram: fluometuron a 4,2; simazíne a 4,8; atrazine a 4,8; bromacil a 3,2;bromacil (40%) + diuron (40%) a 4,8; bromacil (53,3%) + diuron (27,6%) a 4,8; terbacil a 3,2; oxadiazon a 1,5; dichlobenil a 3,0 e 6,0; além de uma testemunha capinada. O estudo das radicel as foi feito pelo método do trado, tendo sido tomadas amostras de solo contendo radicelas, nas distâncias de 80, 160 e 240 cm do tronco, nas camadas de 0 a 15 cm e 15 a 30 cm de profundidade e em duas direções distintas (entrelinhas e entreplantas). Os resultados mostraram que as radicelas localizam-se superficialmente, com 70% delas nos primeiros 15 cm, do total encontrado na camada superficial de 0 a 30 cm de profundidade do solo. Cerca de 75% das radicelas situam-se até a distância de 160 cm do tronco. Na camada mais superficial do solo (0 a 15 cm), a quantidade de radicelas diminuiu de maneira acentuada, à medida que se afastou do tronco. Na camada de 15 a 30 cm de profundidade, ocorreu uma distribuição horizontal mais uniforme, comparada com a da camada de 0 a 15 cm. As radicelas das plantas do cultivar Natal distribuiram-se uniformemente, tanto na direção das plantas da linha vizinha, quanto nas das plantas de uma mesma linha, para o espaçamento de 7,0 m x 7,2 m. Não se detectaram diferenças estatisticamente significativas nas quantidades de radicelas entre as parcelas dos vários tratamentos com herbicidas, excluindo-se desta forma, qualquer efeito negativo de tais produtos químicos sobre o sistema radicular das laranjeiras.

Avaliação da assistência à saúde dos portadores de úlceras venosas atendidos no programa saúde da família do município de Natal/RN

Descriptive research aimed at evaluating the assistance offered to patients with venous ulcers, on lower limbs, attended by the Family Health Program (FHP) team, from the municipality of Natal/RN. The target population was composed of 74 patients with venous ulcers (VU), attended by the FHP teams in the 31 FHUs. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (protocol n.55/05). The data collection was performed in patients homes and in the FHUs, through structured interviews and physical examinations of patients with VU and non-participant observation during the changing of wound dressings in these Units and in users homes. The data was organized into an Excel electronic table and transported into the SPSS 14.0 program, for descriptive analysis on 2x2 contingency tables and inferential (Qui-Square χ2, Spearman Correlation, Binomial Proportion Test and p-value <0.05). The prevalence of VU (0.36/1000) in the target population (over 20 years of age) was greater than in the population registered in FHP (0.25/1000). We detected a greater prevalence in the age area of over 60 years (2.22/1000), with 2.98/1000 for females and 1.3/1000 for males (p-value=0.008). The sociodemographical and health characteristics of patients with VU revealed predominance of females (74.5%), elders over 60 years of age (67.6%), with fundamental education (74.3%), family earnings of up to 2 minimum wages (68.9%), retired (90.5%), ortostatic position (23.0%), inadequate sleep (59,9%), presence of CVI (100.0%), hypertension (44.6%) and diabetes (25.7%). As for the time of existence of the VU, 64.9% had over 1 year, and 35.1% less than 1 year), with predominance of one wound (67.6%). The changing of wound dressings is performed mostly at home, in and inadequate way, especially with incorrect cleaning techniques, likewise incorrect use of products and substances, and reduced participation of the FHP team on the evaluation and application of the dressing and choosing of products and substances. The compressive therapy is not part of therapeutic conducts for treatment in the FHUs. As for the evaluation of assistance to patients with VU, 90.5% were inadequate and only 9.5% adequate. The main inadequacy factors were the absence of: diagnosis (47.3%), consultation with and angiologist (63.5%), compressive treatment (100.0%), adequate optical therapy (98.62%), adequate dressing kit (70.3%), training for the changing of dressings (67.6%), following by the FHP team (51.4%) and performed exams (55.4%). We ve concluded that patients with VU mostly present now socioeconomical level and associated chronic diseases. Considering that assistance offered by FHP is non-systematic, fragmented, with no diagnosis planning, continual evaluation and evolution, we qualify the assistance as inadequate and with low level of solution, directly interfering on the maintenance of the VUs chronic state

Mananoligossacarídeos em dietas para frangos de corte

Objetivou-se avaliar dietas contendo mananoligossacarídeos (MOS) como aditivo alternativo aos promotores de crescimento por meio do estudo da morfometria do intestino e do desempenho de frangos de corte. Para tanto, 1280 pintos de corte foram distribuídos em delineamento inteiramente casualizado com quatro tratamentos (controle negativo, CN: dieta isenta de antibiótico; controle positivo, CP: dieta contendo antibiótico e duas dietas, MOS 1 e MOS 2, nas quais foram adicionadas ao CN duas fontes distintas de MOS) e oito repetições, sendo a unidade experimental composta por 40 aves. Para submeter as aves ao desafio sanitário, foi formulada uma dieta basal com milho, farelo de soja e farinha de carne e ossos. Adotou-se cama reutilizada, limpeza dos bebedouros duas vezes por semana e oferta semanal de água contaminada com cama. Foram avaliadas altura de vilo e profundidade de cripta do duodeno, jejuno e íleo, consumo da dieta, peso médio, ganho de peso e conversão alimentar das aves. Houve melhora na profundidade de cripta no jejuno e na altura de vilo no íleo das aves alimentadas com dietas contendo MOS. A adição de MOS, independente da fonte, resultou em melhor conversão alimentar em relação às aves do CN, sendo similares às aves do CP. Os mananoligossacarídeos podem ser utilizados como aditivo alternativo aos promotores de crescimento em dietas para frangos de corte, porém, dependendo da fonte, esta pode acarretar em pequenas diferenças no desempenho das aves.

Queda de pressão estática por meio de uma coluna de noz macadâmia

As unidades de beneficiamento de macadâmia adotam silos secadores distintos, para cada etapa de secagem, a fim de garantir a manutenção da qualidade do produto pela redução da umidade a níveis desejáveis. Diante da necessidade de quantificar a resistência apresentada pelas nozes, submetidas a diferentes fluxos de ar durante a secagem, bem como avaliar a possibilidade de utilização de modelos empíricos, que estimem o gradiente de pressão a partir da vazão de ar, conduziram-se vários testes em laboratório para obtenção de dados experimentais e ajuste de modelos. Frutos de macadâmia (M. integrifolia), com umidade de 0,11 b.s., após limpeza e classificação, foram colocados no interior de um protótipo constituído por uma coluna de chapa galvanizada (com tomadas para medição da pressão estática), plenum e ventilador, sendo submetidos a diferentes fluxos de ar. Os testes consistiram de três medidas por profundidade, para cada um dos três lotes de nozes, perfazendo um total de nove medidas de pressão estática por profundidade na coluna. Os resultados obtidos permitiram concluir que os fluxos de ar testados apresentaram efeito significativo sobre a queda de pressão estática na coluna de macadâmia, a qual aumentou linearmente com a profundidade. Os dados experimentais ajustaram-se muito bem aos modelos de Shedd e Hunter, sugerindo sua boa aplicabilidade para a macadâmia.

Predição da incrustação em um trocador de calor baseada em redes neurais artificiais

A serious problem that affects an oil refinery s processing units is the deposition of solid particles or the fouling on the equipments. These residues are naturally present on the oil or are by-products of chemical reactions during its transport. A fouled heat exchanger loses its capacity to adequately heat the oil, needing to be shut down periodically for cleaning. Previous knowledge of the best period to shut down the exchanger may improve the energetic and production efficiency of the plant. In this work we develop a system to predict the fouling on a heat exchanger from the Potiguar Clara Camarão Refinery, based on data collected in a partnership with Petrobras. Recurrent Neural Networks are used to predict the heat exchanger s flow in future time. This variable is the main indicator of fouling, because its value decreases gradually as the deposits on the tubes reduce their diameter. The prediction could be used to tell when the flow will have decreased under an acceptable value, indicating when the exchanger shutdown for cleaning will be needed