Climate variability over the last 35,000 years recorded in marine and terrestrial archives in the Australian region : an OZ-INTIMATE compilation

The Australian region spans some 60° of latitude and 50° of longitude and displays considerable regional climate variability both today and during the Late Quaternary. A synthesis of marine and terrestrial climate records, combining findings from the Southern Ocean, temperate, tropical and arid zones, identifies a complex response of climate proxies to a background of changing boundary conditions over the last 35,000 years. Climate drivers include the seasonal timing of insolation, greenhouse gas content of the atmosphere, sea level rise and ocean and atmospheric circulation changes. Our compilation finds few climatic events that could be used to construct a climate event stratigraphy for the entire region, limiting the usefulness of this approach. Instead we have taken a spatial approach, looking to discern the patterns of change across the continent. The data identify the clearest and most synchronous climatic response at the time of the Last Glacial Maximum (LGM) (21 ± 3 ka), with unambiguous cooling recorded in the ocean, and evidence of glaciation in the highlands of tropical New Guinea, southeast Australia and Tasmania. Many terrestrial records suggest drier conditions, but with the timing of inferred snowmelt, and changes to the rainfall/runoff relationships, driving higher river discharge at the LGM. In contrast, the deglaciation is a time of considerable south-east to north-west variation across the region. Warming was underway in all regions by 17 ka. Post-glacial sea level rise and its associated regional impacts have played an important role in determining the magnitude and timing of climate response in the north-west of the continent in contrast to the southern latitudes. No evidence for cooling during the Younger Dryas chronozone is evident in the region, but the Antarctic cold reversal clearly occurs south of Australia. The Holocene period is a time of considerable climate variability associated with an intense monsoon in the tropics early in the Holocene, giving way to a weakened monsoon and an increasingly El Niño-dominated ENSO to the present. The influence of ENSO is evident throughout the southeast of Australia, but not the southwest. This climate history provides a template from which to assess the regionality of climate events across Australia and make comparisons beyond our region. The data identify the clearest and most synchronous climatic response at the time of the Last Glacial Maximum (LGM) (21 ± 3 ka), with unambiguous cooling recorded in the ocean, and evidence of glaciation in the highlands of tropical New Guinea, southeast Australia and Tasmania. Many terrestrial records suggest drier conditions, but with the timing of inferred snowmelt, and changes to the rainfall/runoff relationships, driving higher river discharge at the LGM. In contrast, the deglaciation is a time of considerable south-east to north-west variation across the region. Warming was underway in all regions by 17 ka. Post-glacial sea level rise and its associated regional impacts have played an important role in determining the magnitude and timing of climate response in the north-west of the continent in contrast to the southern latitudes. No evidence for cooling during the Younger Dryas chronozone is evident in the region, but the Antarctic cold reversal clearly occurs south of Australia. The Holocene period is a time of considerable climate variability associated with an intense monsoon in the tropics early in the Holocene, giving way to a weakened monsoon and an increasingly El Niño-dominated ENSO to the present. The influence of ENSO is evident throughout the southeast of Australia, but not the southwest. This climate history provides a template from which to assess the regionality of climate events across Australia and make comparisons beyond our region.

Molecular cocrystals of 5-(4-bromophenyl)-1,3,4-thiadiazol-2-amine: hydrogen bonding in the structures of the 1:1 adduct with 2-(naphthalen-2-yloxy)acetic acid and the salt with 3,5-dinitrobenzoic acid

The structures of the anhydrous products from the interaction of 2-amino-5-(4-bromophenyl)-1,3,4-thiadiazole with (2-naphthoxy)acetic acid, the 1:1 adduct C8H6BrN3S . C12H10O3 (I) and 3,5-dinitrobenzoic acid, the salt C8H7BrN3S+ C7H3N2O6- (II) have been determined. In the adduct (I), a heterodimer is formed through a cyclic hydrogen-bonding motif [graph set R2/2(8)], involving carboxylic acid O-H...N(hetero)and amine N-H...O(carboxyl) interactions. The heterodimers are essentially planar with a thiadiazole to naphthyl ring dihedral angle of 15.9(2)deg. and the intramolecular thiadiazole to phenyl ring angle of 4.7(2)deg. An amine N-H...N(hetero) hydrogen bond between the heterodimers generates a one-dimensional chain structure extending down [001]. Also present are weak benzene-benzene and naphthalene-naphthalene pi-pi stacking interactions down the b axis [minimum ring centroid separation, 3.936(3) Ang.]. With the salt (II), the cation-anion association is also through a cyclic R2/2(8) motif but involving duplex N-H...O(carboxyl) hydrogen bonds, giving a heterodimer which is close to planar [dihedral angles between the thiadiazole ring and the two benzene rings, 5.00(16)deg. (intra) and 7.23(15)deg. (inter)]. A secondary centrosymmetric cyclic N-H...O(carboxyl) hydrogen-bonding association involving the second amino H-atom generates a heterotetramer. Also present in the crystal are weak pi-pi i-\p interactions between thiadiazolium rings [minimum ring centroid separation, 3.936(3)Ang.], as well as a short Br...O(nitro) interaction [3.314(4)Ang.]. The two structures reported here now provide a total of three crystallographically characterized examples of co-crystalline products from the interaction of 2-amino-5-(4-bromophenyl)-1,3,4-thiadiazole with carboxylic acids, of which only one involves proton-transfer.

Heparan sulfate proteoglycans, tumour progression and the cancer stem cell niche

The cancer stem cell hypothesis states that tumours arise from cells with the ability to self-renew and differentiate into multiple cell types, and that these cells persist in tumors as a distinct population that can cause disease relapse and hence metastasis. The crux of this hypothesis is that these cells are the only cells capable of, by themselves, giving rise to new tumours. What proportion of a tumour consists of these stem cells, where are they localised, how are they regulated, and how can we identify them? The stromal cells embedded within the extracellular matrix (ECM) not only provide a scaffold but also produce ECM constituents for use by stem cells. Heparan sulfate proteoglycans (HSPGs) are ubiquitous to this cell niche and interact with a large number of ligands including growth factors, their receptors, and ECM structural components. It is still unclear whether ECM degradation and subsequent metastasis is a result of proteases produced by the tumour cells themselves or by cells within the stromal compartment. The identification of the cellular origin of cancer stem cells along with microenvironmental changes involved in the initiation, progression and the malignant conversion of all cancers is critical to the development of targeted therapeutics. As ubiquitous members of the ECM microenvironment and hence the cancer cell niche, HSPGs are candidates for a central role in these processes.

Investigation of the NOTCH3 and TNFSF7 genes on C19p13 as candidates for migraine

To investigate the migraine locus around the C19p13 region through analysis of the NOTCH3 gene (C19p13.2-p13.1), previously shown to be a gene involved in CADASIL and the TNFSF7 gene (C19p13), homologous to the ligands of TNF-alpha and TNF-beta, genes that have previously been associated with migraine. The NOTCH3 gene was analysed by sequencing all exons with known CADASIL mutations in a typical (non-familial hemiplegic) migraine family (MF1) that has previously been shown to be linked to C19p13. The TNFSF7 gene was investigated through SNP association analysis using a matched case-control migraine population. NOTCH3 gene sequencing results for affected members of MF1 proved to be negative for all known sequence variants giving rise to mutations for CADASIL. TNFSF7 gene chi-square results showed non-significant P values across all populations tested against controls, except for the MO subgroup which displayed a possible association with the TNFSF7 SNP (genotype, allele analysis P = 0.036, P = 0.017 respectively). Our results suggest that common migraine is not caused by any known CADASIL mutations in the NOTCH3 gene of interest. However, the TNFSF7 gene displayed signs of involvement in a MO affected population and indicates that further independent studies of this marker are warranted.

The B subunit of coagulation factor XIII is linked to renin and the Duffy blood group to α-spectrin on human chromosome 1

Family linkage studies were used to detect two linkage relationships on human chromosome 1. The B subunit of coagulation factor XIII showed significant linkage to renin with a maximum lod score of 5.071 at a distance of 10 cM. Significant linkage was also shown between the Duffy blood group and α-spectrin with linkage results giving a combined lod score of 3.194 at 5 cM.

IS-RT-PCR assay detection of MT-MMP in a human breast cancer cell line

The in situ-reverse transcription-polymerase chain reaction (IS-RT-PCR) is a method that allows the direct localisation of gene expression. The method utilises the dual buffer mediated activity of the enzyme rTth DNA polymerase enabling both reverse transcription and DNA amplification. Labelled nucleoside triphosphates allow the site of expression to be labelled, rather than the PCR primers themselves, giving a more accurate localisation of transcript expression and decreased background than standard in situ hybridisation (ISH) assays. The MDA-MB-231 human breast carcinoma (HBC) cell line was assayed via the IS-RT-PCR technique, using primers encoding MT-MMP (membrane-type matrix metalloproteinase) and human β-actin. Our results clearly indicate baseline expression of MT-MMP in the relatively invasive MDA-MB-231 cell line at a signal intensity similar to the housekeeping gene β-actin, and results following induction with Concanavalin A (Con A) are consistent with our previous results obtained via Northern blotting.

Dislocations of desire : the transnational movement of gifts within the Vietnamese diaspora

Gifts have intrigued and challenged scholars ever since interest in the subject was piqued by Marcel Mauss who, in 1925, wrote the book The gift: The form and reason for exchange in archaic societies. Although ethnographic studies of giftgiving have been mostly confined to small-scale communities, scholars have more recently turned their attention to industrial societies, with studies of Christmas giving, Japanese gift-giving, etc. Now, as studies of consumption are entering a phase of efflorescence, it is time to re-evaluate gift-giving. The recent rapid expansion in the transnational flow of people, objects and ideas has had an impact on the social conditions associated with new global patterns of consumption. In this atmosphere of overlapping cultural, economic and political worlds, there is a need to look again at the objects that pass between us as gifts...

Early career teacher attrition: A case study of independent Catholic girls' schools in Queensland

This research study sought to understand why so many early career teachers in an Australian Religious Institute education sector were leaving teaching. Previous studies on early career teacher attrition across all sectors were based on supply and demand theory, as well as contemporary career theory, and identified various factors such as remuneration, student behaviour and school resourcing as influencing factors. These Australian Religious Institute education sector schools take pride in their good standing. The schools in this sector have worked at addressing many of the factors associated with early career teacher attrition yet despite their efforts they are also experiencing attrition of their early career teachers. A case study of the Queensland independent Catholic girls' school sector explored firstly, the construct of being a teacher in these schools, and secondly, the sociocultural discourses giving rise to unique situations contributing to early career teachers making the decision to leave teaching. Eight early career teachers who had left the profession for which they had recently trained, and eight long standing teachers who were still employed in the sector were interviewed to yield a rich data set. The interviews were conducted within a theoretical framework of what it means to be a teacher by Graham and Phelps (2003) and pedagogic identity and pedagogic practice as noted by Bernstein (2000). The distributive rules and the evaluative rules (Bernstein, 2000) provided the analytical framework to confirm that particular discourses, together with the ways in which the early career teachers realised being a teacher, were important factors in the decision not to remain in teaching. It emerged that being a teacher in the Queensland independent Catholic girls' school sector was complex and demanding. Being a teacher required long hours of personal time to realise the demands of teaching, a situation which did not fare well with the early career teachers who struggled to balance the requirements of teaching with their own personal time. Furthermore, evidence was found that the schools had multifaceted sociocultural discourses that the early career teacher research participants struggled to understand. In contrast, long standing teachers had, through time, experience and observation, developed skills that allowed them to navigate these complex discourses and thus remain long term in the sector. Another finding revealed the considerable dichotomy in how the charism of the schools (the unique way Catholic institutions transmit the beliefs and teachings of the Catholic Church) unfolded for students and staff. While these schools transmit their charism effectively to the students, it is ineffectively transmitted to early career teachers. In contemporary times when a majority of teachers in Australia are moving into their 50s and large numbers are retiring or resigning, (Australian Government, 2011; Australian Government Department of Education, 2007b) it is important for the long term viability of the independent Catholic school sector to retain a stable staff. This study demonstrates that if Catholic schools want to retain their unique identity in the education community and sustain their unique charisms, then they must adopt positive practices to support early career teachers.

The UltraCommuter : a viable and desirable solar-powered commuter vehicle

The University of Queensland UltraCommuter project is the demonstration of an ultra-light weight, low drag, energy efficient and low polluting, electric commuter vehicle equipped with a 2.5m2 on-board solar array. A key goal of the project is to make the vehicle predominantly self-sufficient from solar power for normal driving purposes , so that it does not require charging or refuelling from off-board sources. This paper examines the technical feasibility of the solar-powered commuter vehicle concept, as it applies the UltraCommuter project. A parametric description of a solar-powered commuter vehicle is presented. Real solar insolation data is then used to predict the solar driving range for the UltraCommuter and this is compared to typical urban usage patterns for commuter vehicles in Queensland. A comparative analysis of annual greenhouse gas emissions from the vehicle is also presented. The results show that the UltraCommuter’s on-board solar array can provide substantial supplementation of the energy required for normal driving, powering 90% of annual travel needs for an average QLD passenger vehicle. The vehicle also has excellent potential to reduce annual greenhouse gas emissions from the private transport sector, achieving a 98% reduction in CO2 emissions when compared to the average QLD passenger vehicle. Lastly, the vehicle battery pack provides for tolerance to consecutive days of poor weather without resorting to grid charging, giving uninterrupted functionality to the user. These results hold great promise for the technical feasibility of the solar-powered commuter vehicle concept.

The life course of Australian researchers : experiences of applying for research funding

The life course of Australian researchers includes regular funding applications, which incur large personal and time costs. We previously estimated that Australian researchers spent 550 years preparing 3,727 proposals for the 2012 NHMRC Project Grant funding round, at an estimated annual salary cost of AU$66 million. Despite the worldwide importance of funding rounds, there is little evidence on what researchers think of the application process. We conducted a web-based survey of Australian researchers (May–July 2013) asking about their experience with NHMRC Project Grants. Almost all researchers (n=224 at 31 May) supported changes to the application (96%) and peer-review (88%) processes; 73% supported the introduction of shorter initial Expressions of Interest; and half (50%) provided extensive comments on the NHMRC processes. Researchers agreed preparing their proposals always took top priority over other work (97%) and personal (87%) commitments. More than half (57%) provided extensive comments on the ongoing personal impact of concurrent grant-writing and holiday seasons on family, children and other relationships. Researchers with experience on Grant Review Panels (34%) or as External Reviewers (78%) reported many sections of the proposals were rarely or never read, which suggests these sections could be cut with no impact on the quality of peer review. Our findings provide evidence on the experience of Australian researchers as applicants. The process of preparing, submitting and reviewing proposals could be streamlined to minimise the burden on applicants and peer reviewers, giving Australian researchers more time to work on actual research and be with their families.

Real - time prediction of rainfall induced instability of residual soil slopes associated with deep cracks

The early warning based on real-time prediction of rain-induced instability of natural residual slopes helps to minimise human casualties due to such slope failures. Slope instability prediction is complicated, as it is influenced by many factors, including soil properties, soil behaviour, slope geometry, and the location and size of deep cracks in the slope. These deep cracks can facilitate rainwater infiltration into the deep soil layers and reduce the unsaturated shear strength of residual soil. Subsequently, it can form a slip surface, triggering a landslide even in partially saturated soil slopes. Although past research has shown the effects of surface-cracks on soil stability, research examining the influence of deep-cracks on soil stability is very limited. This study aimed to develop methodologies for predicting the real-time rain-induced instability of natural residual soil slopes with deep cracks. The results can be used to warn against potential rain-induced slope failures. The literature review conducted on rain induced slope instability of unsaturated residual soil associated with soil crack, reveals that only limited studies have been done in the following areas related to this topic: - Methods for detecting deep cracks in residual soil slopes. - Practical application of unsaturated soil theory in slope stability analysis. - Mechanistic methods for real-time prediction of rain induced residual soil slope instability in critical slopes with deep cracks. Two natural residual soil slopes at Jombok Village, Ngantang City, Indonesia, which are located near a residential area, were investigated to obtain the parameters required for the stability analysis of the slope. A survey first identified all related field geometrical information including slope, roads, rivers, buildings, and boundaries of the slope. Second, the electrical resistivity tomography (ERT) method was used on the slope to identify the location and geometrical characteristics of deep cracks. The two ERT array models employed in this research are: Dipole-dipole and Azimuthal. Next, bore-hole tests were conducted at different locations in the slope to identify soil layers and to collect undisturbed soil samples for laboratory measurement of the soil parameters required for the stability analysis. At the same bore hole locations, Standard Penetration Test (SPT) was undertaken. Undisturbed soil samples taken from the bore-holes were tested in a laboratory to determine the variation of the following soil properties with the depth: - Classification and physical properties such as grain size distribution, atterberg limits, water content, dry density and specific gravity. - Saturated and unsaturated shear strength properties using direct shear apparatus. - Soil water characteristic curves (SWCC) using filter paper method. - Saturated hydraulic conductivity. The following three methods were used to detect and simulate the location and orientation of cracks in the investigated slope: (1) The electrical resistivity distribution of sub-soil obtained from ERT. (2) The profile of classification and physical properties of the soil, based on laboratory testing of soil samples collected from bore-holes and visual observations of the cracks on the slope surface. (3) The results of stress distribution obtained from 2D dynamic analysis of the slope using QUAKE/W software, together with the laboratory measured soil parameters and earthquake records of the area. It was assumed that the deep crack in the slope under investigation was generated by earthquakes. A good agreement was obtained when comparing the location and the orientation of the cracks detected by Method-1 and Method-2. However, the simulated cracks in Method-3 were not in good agreement with the output of Method-1 and Method-2. This may have been due to the material properties used and the assumptions made, for the analysis. From Method-1 and Method-2, it can be concluded that the ERT method can be used to detect the location and orientation of a crack in a soil slope, when the ERT is conducted in very dry or very wet soil conditions. In this study, the cracks detected by the ERT were used for stability analysis of the slope. The stability of the slope was determined using the factor of safety (FOS) of a critical slip surface obtained by SLOPE/W using the limit equilibrium method. Pore-water pressure values for the stability analysis were obtained by coupling the transient seepage analysis of the slope using finite element based software, called SEEP/W. A parametric study conducted on the stability of an investigated slope revealed that the existence of deep cracks and their location in the soil slope are critical for its stability. The following two steps are proposed to predict the rain-induced instability of a residual soil slope with cracks. (a) Step-1: The transient stability analysis of the slope is conducted from the date of the investigation (initial conditions are based on the investigation) to the preferred date (current date), using measured rainfall data. Then, the stability analyses are continued for the next 12 months using the predicted annual rainfall that will be based on the previous five years rainfall data for the area. (b) Step-2: The stability of the slope is calculated in real-time using real-time measured rainfall. In this calculation, rainfall is predicted for the next hour or 24 hours and the stability of the slope is calculated one hour or 24 hours in advance using real time rainfall data. If Step-1 analysis shows critical stability for the forthcoming year, it is recommended that Step-2 be used for more accurate warning against the future failure of the slope. In this research, the results of the application of the Step-1 on an investigated slope (Slope-1) showed that its stability was not approaching a critical value for year 2012 (until 31st December 2012) and therefore, the application of Step-2 was not necessary for the year 2012. A case study (Slope-2) was used to verify the applicability of the complete proposed predictive method. A landslide event at Slope-2 occurred on 31st October 2010. The transient seepage and stability analyses of the slope using data obtained from field tests such as Bore-hole, SPT, ERT and Laboratory tests, were conducted on 12th June 2010 following the Step-1 and found that the slope in critical condition on that current date. It was then showing that the application of the Step-2 could have predicted this failure by giving sufficient warning time.

Candidate gene association studies : a comprehensive guide to useful in silico tools

The candidate gene approach has been a pioneer in the field of genetic epidemiology, identifying risk alleles and their association with clinical traits. With the advent of rapidly changing technology, there has been an explosion of in silico tools available to researchers, giving them fast, efficient resources and reliable strategies important to find casual gene variants for candidate or genome wide association studies (GWAS). In this review, following a description of candidate gene prioritisation, we summarise the approaches to single nucleotide polymorphism (SNP) prioritisation and discuss the tools available to assess functional relevance of the risk variant with consideration to its genomic location. The strategy and the tools discussed are applicable to any study investigating genetic risk factors associated with a particular disease. Some of the tools are also applicable for the functional validation of variants relevant to the era of GWAS and next generation sequencing (NGS).

Study of in situ laser deposited YBCO thin films

YBCO thin films were fabricated by laser deposition, in situ on MgO substrates, using both O2 and N2O as process gas. Films with Tc above 90 K and jc of 106 A/cm2 at 77 K were grown in oxygen at a substrate temperature of 765 °C. Using N2O, the optimum substrate temperature was 745 °C, giving a Tc of 87 K. At lower temperatures, the films made in N2O had higher Tc (79 K) than the films made in oxygen (66 K). SEM and STM investigations of the film surfaces showed the films to consist of a comparatively smooth background surface and a distribution of larger particles. Both the particle size and the distribution density depended on the substrate temperature.

Understanding VET teachers' dilemmas in providing quality education to international students in Brisbane

In the past fifteen years, increasing attention has been given to the role of Vocational Education and Training (VET) in attracting large numbers of international students and its contribution to the economic development of Australia. This trend has given rise to many challenges in vocational education, especially with regard to providing quality education that ensures international students' stay in Australia is a satisfactory experience. Teaching and learning is continuously scrutinized, teaching quality and student assessment are subject to regular audit (Takerei, 2010). VET teachers are key stakeholders in international education and share responsibility for ensuring international students gain quality learning experiences and positive outcomes, however, their experiences are generally not well understood. Therefore, this thesis, investigates particular challenges and associated dilemmas that VET teachers experience when teaching international students. The research participants were 15 teachers from several public and private VET institutions in Brisbane, Australia. The method involved responsive interviewing and inductive data analysis to identify and categorize teachers' challenges and dilemmas. The research reveals qualitatively different ways in which the 15 VET educators experienced challenges and associated dilemmas in their culturally diverse teaching context. The research shows that VET teachers experience numerous challenges and various inter-related professional, educational and personal dilemmas. These dilemmas result from ethical tensions teachers experience in their interactions with international students, teaching colleagues and their employment institutions. The dilemmas are often influenced by current economic and political conditions of international education. The dilemmas raised in the study by 15 VET teachers might be familiar to other teachers in VET and universities but to date they have received limited attention by researchers. This study's findings indicate significant implications for VET teachers, students, VET institutions and the government at a time of rapid economic, political, cultural and educational change. The findings are of potential interest to VET policy makers, managers and teachers. By giving voice to VET teachers, who are key stakeholders in the sustainability and future growth of VET, they contribute evidence for ongoing review and development of quality learning and teaching in the culturally diverse VET sector.

"Ruby's Music Festival" : developing problem solving skills using online scenarios and creating opportunities to feed forward

One of the characteristics of good teaching is giving the highest quality feedback on student work but the term “feedback” is most commonly associated with summative assessment given by a teacher after work is completed. The student can often be a passive participant in the process. This article looks at the implementation of web based scenarios completed by students prior to summative assessment with the objective of improving legal problem solving skills. It examines the design process and the implementation of the problem solving activity and the approach to teaching and learning taken in the new law unit of which it is part. We argue that such activities are effective tools to feed forward and reflect on the implications for the effective teaching of law in higher education.