Caracterização molecular e patogênica de isolados de Xanthomonas albilineans (Ashby) Dowson, agente causal da escaldadura das folhas da cana-de-açúcar

A escaldadura das folhas, causada pela bactéria Xanthomonas albilineans (Ashby) Dowson, é uma das cinco doenças mais importantes da cana-de-açúcar e sua ocorrência reduz o rendimento e a longevidade da cultura. Variedades resistentes têm sido usadas para o controle, porém há evidências da ocorrência de variantes do patógeno. Em campos comerciais do Estado de São Paulo, tem sido observado que a mesma variedade de cana se apresenta como resistente em uma região e suscetível em outra, sugerindo a ocorrência de variantes na população do patógeno. Assim, o objetivo deste trabalho foi investigar a presença de diversidade genética da bactéria em áreas comerciais. Um total de 50 isolados foram obtidos em cultura pura a partir de plantas sintomáticas coletadas em Piracicaba (SP), Jaú (SP), região de Ribeirão Preto (SP) e Iturama (MG). Os isolados foram confirmados como pertencentes à espécie X. albilineans por meio de características de colônias, serologia e PCR com 'primers' específicos. Para caracterização da diversidade genética, foi usado o método de Rep-PCR, a partir do DNA extraído de cada isolado. Oito isolados, provenientes dos diferentes grupos identificados por rep-PCR, foram usados em testes de patogenicidade, por meio de inoculação em duas variedades de cana. Os resultados confirmaram todos os isolados como pertencentes à espécie X. albilineans. Por meio de rep-PCR, foi demonstrada diversidade genética entre os isolados, os quais foram separados em três grupos: um grupo composto somente pelos isolados de Piracicaba; um segundo, contendo todos os isolados amostrados em Jaú e na região de Ribeirão Preto, e um isolado de Iturama; e, no terceiro, somente dois isolados coletados em Iturama. Os testes de patogenicidade revelaram diferenças na agressividade entre isolados, porém sem relação com sua região de origem. Este trabalho revelou a ocorrência de diversidade genética e de agressividade dentro da espécie X. albilineans, evidenciando uma possível relação entre ocorrência de variantes do patógeno e reação de variedades de cana cultivadas no estado de São Paulo.

Biogeochemistry in acid sulphate soil landscapes and small urban centres in Western Finland

The overall purpose of this thesis was to increase the knowledge on the biogeochemistry of rural acid sulphate (AS) soil environments and urban forest ecosystems near small towns in Western Finland. In addition, the potential causal relationship between the distribution of AS soils and geographical occurence of multiple sclerosis (MS) disease was assessed based on a review of existing literature and data. Acid sulphate soils, which occupy an area of approximately 17–24 million hectare worldwide, are regarded as the nastiest soils in the world. Independent of the geographical locality of these soils, they pose a great threat to their surrounding environment if disturbed. The abundant metal-rich acid drainage from Finnish AS soils, which is a result of sulphide oxidation due to artificial farmland drainage, has significant but spatially and temporally variable ecotoxicological impacts on biodiversity and community structure of fish, benthic invertebrates and macrophytes. This has resulted in mass fish kills and even eradication of sensitive fish species in affected waters. Moreover, previous investigations demonstrated significantly enriched concentrations of Co, Ni, Mn and Al, metals which are abundantly mobilised in AS soils, in agricultural crops (timothy grass and oats) and approximately 50 times higher concentrations of Al in cow milk originating from AS soils in Western Finland. Nevertheless, the results presented here demonstrate, in general, relatively moderate metal concentrations in oats and cabbage grown on AS soils in Western Finland, although some of the studied fields showed anomalous values of metals (e.g. Co and Ni) in both the soil and target plants (especially oats), similar to that of the previous investigations. The results indicated that the concentrations of Co, Ni, Mn and Zn in oats and Co and Zn in cabbage were governed by soil geochemistry as these metals were correlated with corresponding concentrations extracted from the soil by NH4Ac-EDTA and NH4Ac, respectively. The concentrations of Cu and Fe in oats and cabbage were uncorrelated to that of the easily soluble concentrations in the soils, suggesting that biological processes (e.g. plant-root processes) overshadow geochemical variation. The concentrations of K and Mg in cabbage, which showed a low spread and were strongly correlated to the NH4Ac extractable contents in the soil, were governed by both the bioavailable fractions in the topsoil and plant-uptake mechanisms. The plant´s ability to regulate its uptake of Ca and P (e.g. through root exudates) seemed to be more important than the influence of soil geochemistry. The distribution of P, K, Ca, Mg, Mn and S within humus, moss and needles in and around small towns was to a high degree controlled by biological cycling, which was indicated by the low correlation coefficients for P, K, Ca, Mg and S between humus and moss, and the low spread of these nutrients in moss and needles. The concentration variations of elements in till are mainly due to natural processes (e.g. intrusions, weathering, mineralogical variations in the bedrock). There was a strong spatial pattern for B in humus, moss and needles, which was suggested to be associated with anthropogenic emissions from nearby town centres. Geogenic dust affected the spatial distribution of Fe and Cr in moss, while natural processes governed the Fe anomaly found in the needles. The spatial accumulation patterns of Zn, Cd, Cu, Ni and Pb in humus and moss were strong and diverse, and related to current industry, the former steel industry, coal combustion, and natural geochemical processes. An intriguing Cu anomaly was found in moss. Since it was located close to a main railway line and because the railway line´s electric cables are made of Cu, it was suggested that the reason for the Cu anomaly is corrosion of these cables. In Western Finland, where AS soils are particularly abundant and enrich the metal concentrations of stream waters, cow milk and to some extent crops, an environmental risk assessment would be motivated to elucidate if the metal dispersion affect human health. Within this context, a topic of concern is the distribution of multiple sclerosis as high MS prevalence rates are found in the main area of AS soils. Regionally, the AS soil type in the Seinäjoki area has been demonstrated to be very severe in terms of metal leaching, this area also shows one of the highest MS rates reported worldwide. On a local scale, these severe AS soil types coincide well with the corresponding MS clustering along the Kyrönjoki River in Seinäjoki. There are reasons to suspect that these spatial correlations are causal, as multiple sclerosis has been suggested to result from a combination of genetic and environmental factors.

Efeito de extratos de plantas medicinais no controle de Colletotrichum acutatum, agente causal da flor preta do morangueiro

A flor preta do morangueiro, causada por Colletotrichum acutatum, acarreta sérios problemas à cultura. Com o objetivo de verificar a utilização de extratos vegetais no controle da doença, testes "in vitro" foram realizados com 11 extratos vegetais hidroalcoólicos produzidos de plantas utilizadas na medicina popular. Os extratos foram preparados a partir de diferentes partes da planta, de acordo com a espécie, utilizando água e álcool no processo de extração por maceração. Foi verificada a influência dos extratos no crescimento micelial, esporulação e germinação de esporos de C. acutatum, e também no controle do patógeno em folhas e frutos destacados. De acordo com a metodologia utilizada, os extratos vegetais que apresentaram maior eficiência foram os de folha e ramos de Ruta graveolens, Artemisia absinthium e bulbos de Allium sativum, indicando ter essas plantas potencial fungitóxico para o controle de C. acutatum.

Reação de cultivares de batata a Streptomyces scabies, agente causal da sarna comum profunda

Este trabalho visou caracterizar quanto a critérios morfológicos e fisiológicos isolados de Streptomyces causadores de sarna comum profunda em batata; avaliar o comportamento de cultivares em relação à doença e a variação na agressividade entre os isolados da bactéria. Os isolados de Streptomyces apresentaram coloração cinza em meio extrato de levedura e malte e cadeias de esporos espiraladas, produzidas sobre um micélio aéreo. Ocorreu produção de melanina em meio de tirosina-ágar e a utilização de oito fontes de carbono recomendadas, propriedades estas que correspondem às descritas para S. scabies. Batatas-semente sadias de seis cultivares foram plantadas em substrato infestado com seis isolados de S. scabies separadamente e as plantas cultivadas em vasos e ambiente aberto. A severidade da doença foi estimada com auxílio de uma escala diagramática e avaliou-se o rendimento de tubérculos (g/planta). As cvs. Mondial e Jaete Bintje foram as mais resistentes à sarna comum com severidade média nos dois experimentos de 10,5% e 14,0%, respectivamente, seguidas por Asterix (17,4%), Ágata (21,8%), Monalisa (23,0%) e Cupido (23,3%). A agressividade dos isolados variou quantitativamente, com severidade maior para o isolado M4 (34,7%) e menor para o isolado M1 (6,2%). Redução da produção de tubérculos foi verificada na cv. Jaete Bintje, no primeiro experimento, e quando as cultivares foram infectadas pelos isolados A1, M2 e M3, no primeiro experimento, e pelo isolado M4, no segundo experimento.

Understanding change processes in business networks : a study of convergence in Finnish telecommunications 1985-2005

Aktörer inom telekommunikationsbranschen i Finland har genomgått en intensiv förändring under de senaste 25 åren, från 1980-talets självständiga företag till företag beroende av varandra, och även av aktörer inom närliggande branscher. I dag skapas telekommunikationsmarknaden inte endast av operatörerna, utan också av mediebolag (t.ex. MTV Media) och IT-företag (t.ex. TietoEnator). Gränserna mellan olika industrier håller därmed på att suddas ut - ett fenomen som allmänt benämns som teknologisk konvergens. Konvergens innebär att någonting integreras; det kan handla om t.ex. teknologier (telefoni och Internet), företag (AOL och Time Warner), industrier (telekom, media och IT-branscherna), tjänster (mobilt TV), produkter (PDA) osv. Detta innebär att ytterst få telekomaktörer ensamma kan vidareutveckla marknaden och tekniska lösningar. Samarbete mellan aktörer krävs; mobiltelefontillverkare, innehållsproducenter, operatörer osv. bör intesifiera sitt samarbete för att kunna erbjuda attraktiva tjänster och produkter till kunder och slutanvändare. Avhandlingen fokuserar speciellt på affärsnätverk och samarbetsmönster mellan nätverksaktörer som medel för att få tillgång till resurser som krävs i en konvergenskarakteriserad affärsomgivning. Avhandlingen lyfter fram vad den teknologiska konvergensen har inneburit för telekomaktörer, dvs. att företag tvingats förändra sina strategier och verksamhetsmodeller. För många företag i branschen har anpassningen till konvergenstänkande varit utmanande, och i vissa fall kan man till och med tala om att företagen upplevt en identitetskris. Den utförda forskningen visar att konvergens uppfattas på marknaden som en pågående förändringsprocess, där varje telekomaktör är tvungen att utvärdera sin roll och position i relation till andra aktörer inom branschen. Konvergensprocesser forsätter i framtiden med ökad intensitet. Aktörerna skapar medvetet sin omgivning genom att agera i olika roller, som kan sträcka sig över industrigränser. Avhandlingen påvisar även att externa händelser och industrikontexten påverkar dynamiken i ett affärsnätverk.

Diversidade fenotípica e patogênica de Colletotrichum, agente causal da antracnose em mangueira, e identificação de espécie

O presente trabalho teve como objetivo estudar a diversidade fenotípica e patogênica de 40 isolados de Colletotrichum obtidos de mangueira no Nordeste do Brasil e identificar diferentes espécies desse fitopatógeno, agente causal de antracnose, através da análise da seqüência da região ITS do rDNA. Quanto à caracterização morfológica e cultural, as colônias dos isolados apresentaram diversidade em relação à cor e aspecto, sendo mais comum à cor branco-cinza, característica de Colletotrichum gloeosporioides. Não foram observadas variações expressivas na morfologia dos 40 isolados. Os conídios apresentaram-se, predominantemente, hialinos e unicelulares, com formato variando de bastonete para cilíndrico. Todos os isolados produziram apressórios variados em formato e quantidade e apenas 10 isolados apresentaram setas. Para efeito do crescimento micelial e taxa de crescimento foi possível classificar os isolados em sete grupos. Vinte e dois isolados exibiram taxa de crescimento >10mm/dia, considerada típica da espécie C. gloeosporioides. Os isolados foram patogênicos em folhas destacadas de mangueira, induzindo sintomas de antracnose, na forma de manchas escuras levemente deprimidas, e apresentando variações quanto à agressividade. Na identificação específica, baseada na análise da seqüência ITS do DNA ribossomal, 36 isolados amplificaram com o oligonucleotídeos CgInt, específico para C. gloeosporioides e o ITS4, Os isolados CM1, CM4, CM5 e CM10, não amplificaram produtos para nenhum dos oligonucleotídeos específicos, sendo identificados como Colletotrichum spp. Os resultados desse trabalho demonstraram que isolados de Colletotrichum, obtidos de mangueira, apresentam ampla variabilidade morfofisiológica e patogênica. E que, possivelmente, existe mais de uma espécie de Colletotrichum que causa antracnose em mangueira no Nordeste do Brasil.

In vivo sensitivity reduction of Puccinia triticina races, causal agent of wheat leaf rust, to DMI and QoI fungicides

Experiments were carried out to determine in vivo the IC50 and the IC90 for demethylation-inhibitor fungicides (DMIs, triazoles) and quinone outside inhibitors (QoIs, strobilurins) to the five most frequent races of Puccinia triticina in 2007 growing season in Southern Brazil. The tests were done in a greenhouse with wheat seedlings. DMI fungicides were tested at the concentrations, in mg/L, 0.0; 0.02; 0.2; 2.0; 20.0; 100.0 and 200.0, and QoIs at the concentrations 0.0; 0.0001; 0.001; 0.01; 0.1; 1 and 10.0 mg of active ingredient/L water. Fungicides were preventively applied at 24 hours before the inoculation of seedlings with the fungal spores. The effect of treatments was assessed based on the number of uredia/cm². The lowest IC50 (inhibitory concentration) for DMI fungicides determined for MCG-MN, sensitive race, ranged from 0.33 to 0.91 mg/L, while the highest values for MDP-MR, MDT-MR, MDK-MR, MFH-HT races, varied from 9.63 to 85.64 mg/L (suspected insensitivity). QoI fungicide presented an IC50 varying from 0.0018 to 0.14 mg/L. The sensitivity reduction factor for DMIs varied from 8.8 to 238.8, and for QoIs from 0.3 to 1.5 mg/L. Sensitivity reduction was confirmed for the races MDP-MR, MDT-MR, MDK-MR, MFH-HT to DMIs, as well as their sensitivity to QoI fungicides.

Fungicide baseline for mycelial sensitivity of Exserohilum turcicum, causal agent of northern corn leaf blight

Northern corn leaf blight, caused by Exserohilum turcicum(Et), is one of the major corn diseases which can reduce grain yield and quality. The aim of this study was to determine the mycelial sensitivity of ten Etisolates, five from Argentina and five from Brazil, to six fungicides (carbendazim, captan, fludioxinil, metalaxyl, iprodione and thiram) used in seed treatment. The inhibitory concentration (IC50) was determined by using seven concentrations of the fungicides supplemented to the agar medium. The mycelial colony diameter was measured with a digital caliper. Experimental design was completely randomized with four replicates. Data on the percent mycelial growth inhibition were analyzed by logarithmic regression and the IC50 was calculated. The fungicide iprodione was the most potent, with IC50 < 0.01 mg/L, followed by fludioxonil, IC50 0.31 mg/L, and thiram, 1.37 mg/L. Carbendazim, metalaxyl and captan were classified as non-fungitoxic, showing IC50 > 50 mg/L for all isolates. Although iprodione is the most potent fungicide, it is not used for corn seed treatment. The IC50s obtained in this study can be used as baseline for future monitoring studies of Etsensitivity to fungicides.

Reação à Bipolaris maydis, agente causal da mancha foliar, em híbridos apomíticos de Panicum maximum

A mancha foliar, causada por Bipolaris maydis, é a principal doença de Panicum maximum. A seleção de genótipos resistentes é a melhor estratégia para o controle desta doença. Com o objetivo de identificar fontes de resistência de P. maximum à mancha foliar, 92 híbridos apomíticos, originários de cruzamentos das cultivares Tanzânia-1 e Mombaça, e outros três genótipos sexuais foram testados. Em blocos casualizados, com oito repetições cada, inocularam-se plantas com 30 dias de idade e, após 12 dias, a severidade da doença foi avaliada. Foram verificadas diferenças significativas (P<0,05), de genótipos entre e dentro das progênies, com relação a resistência à mancha foliar. Identificaram-se híbridos com resistência à doença, com destaque para os híbridos MS81, A109, B109, B89 e A4.

The role of selection in functional explanations

In this essay I will argue that natural selection is more important to functional explanations than what has been thought in some of the literature in philosophy of biology. I start by giving a brief overview of the two paradigms cases of functional explanations: etiological functions and causal-role functions. i then consider one particular attempt to conciliate both perspectives given by David Buller (1998). Buller's trial to conciliate both etiological functions and causal-role functions results in what he calls a weak etiological theory. I argue that Buller has not succeeded in his construal of the weak etiological theory: he underestimates the role that selective processes have in functional explanations and so his theory may not be classified as an etiologial theory. As an alternative, I consider the account of etiological functions given by Ruth Millikan (1984) and I argue that Millikan's theory is more comprehensive to assess contentious case in biology like exaptations. Finally, I conclude by analyzing where the adoption of Millikan's theory leave us. I argue, contrary to Millikan and others, that once we assume the importance of natural selection in functional explanations, there is no strong reason to resist a linguistic reform of the word function and hence that the attempts to conciliate both etiological functions and causal-role functions are misplaced.

UMA TEORÍA CAUSAL PARA LOS CASOS FREGE

Fodor ha argumentado a favor de un par de tesis que pueden caracterizarse como constituyendo un dilema: Por un lado, si adoptamos una teoría funcional para los conceptos explicamos semánticamente los casos Frege pero caemos en el holismo semántico. Por otro lado, si adoptamos una teoría causal/informacional evitamos el holismo pero no explicamos los casos Frege semánticamente. Fodor (por ej, 1994, 1998 y 2008) intenta evitar la segunda parte del dilema argumentando que los casos de Frege pueden tener una explicación sintáctica y no semántica. En este trabajo intentaré ofrecer una salida alternativa al dilema fodoriano. Propondré una explicación semántica de los casos Frege que incorpora tanto elementos de una teoría causal como de una de rol funcional. Afirmaré que el contenido cognitivo o estrecho de un concepto (el tipo de contenido aparentemente exigido por los casos Frege) es el conjunto de contenidos causales/informacionales de las representaciones que figuran en su rol funcional. Considero que individuar a las representaciones en los roles por medio de sus contenidos causales permite evitar el holismo (evitando el proceso de ramsificación típicamente empleado para individuar a los roles) y que identificar el contenido cognitivo con contenidos causales/informacionales de las representaciones en los roles permite evitar el referencialismo de las propuestas causales (podemos distinguir sentido de referencia en términos causales).

Usability of laser–arc hybrid welding processes in industrial applications

Metal industries producing thick sections have shown increasing interest in the laser–arc hybrid welding process because of its clear advantages compared with the individual processes of autogenous laser welding and arc welding. One major benefit of laser–arc hybrid welding is that joints with larger gaps can be welded with acceptable quality compared to autogenous laser welding. The laser-arc hybrid welding process has good potential to extend the field of applications of laser technology, and provide significant improvements in weld quality and process efficiency in manufacturing applications. The objective of this research is to present a parameter set-up for laser–arc hybrid welding processes, introduce a methodical comparison of the chosen parameters, and discuss how this technology may be adopted in industrial applications. The research describes the principles, means and applications of different types of laser–arc hybrid welding processes. Conducted experiment processing variables are presented and compared using an analytical model which can also be used for predictive simulations. The main argument in this thesis is that profound understanding of the advanced technology of laser-arc hybrid welding will help improve the productivity of welding in industrial applications. Based on a review of the current knowledge base, important areas for further research are also identified. This thesis consists of two parts. The first part introduces the research topic and discusses laser–arc hybrid welding by characterizing its mechanism and most important variables. The second part comprises four research papers elaborating on the performance of laser– arc hybrid welding in the joining of metals. The study uses quantitative and qualitative research methods which include in-depth, interpretive analyses of results from a number of research groups. In the interpretive analysis, the emphasis is placed on the relevance and usefulness of the investigative results drawn from other research publications. The results of this study contribute to research on laser–arc hybrid welding by increasing understanding of how old and new perspectives on laser–arc hybrid welding are evidenced in industry. The research methodology applied permits continued exploration of how laser–arc hybrid welding and various process factors influence the overall quality of the weld. Thestudy provides a good foundation for future research, creates improved awareness of the laser–arc hybrid welding process, and assists the metal industry to maximize welding productivity.

Measuring Processes of a New Packaging Solutions with the Balanced Scorecard, case DigiCup

The aim of this study was to create a Balanced Scorecard to the DigiCup solution. The first goal was to create process descriptions to the few critical processes. The second goal was to define appropriate measurements, according to customer survey as well as following the Balanced Scorecard process description, to manage the critical success factors. The overall goal of this study was to create a performance measurement system for the solution which guides the operation towards continuous improvement. This study was conducted by using both qualitative and quantitative methods, and the analysis was done by using a case study method. The material was gathered from the current customers, the management and the employees using structured, semi-structured and open group and individual interviews. The current customers were divided into retailers and direct customers of the DigiCup solution. The questions which the customers were asked were related to the information about interviewee, company, business strategy, market, satisfaction survey and future requirements. The management defined the strategy and took part in specifying the perspectives, objectives and measurements to the Balanced Scorecard of the DigiCup solution. The employees participated into the choosing of the metrics. The material consisted from altogether sixteen interviews. At the beginning of the study the product development, the order-delivery as well as the printing processes was chosen to be the critical processes of the DigiCup solution. These processes were concentrated on already in the literature review while trying to find the characteristics of these processes as well as the critical success factors and the appropriate measurements, which could be utilized when creating the Balanced Scorecard to the DigiCup solution according to the customer survey. The appropriate perspectives, objectives and measurements were found to the DigiCup solution. The chosen measures works as a basis for the development of IT-reporting tool. As a conclusion it can be stated that when discussing a new business, where the objectives are changing according to which development’s phases the company is in, the measurement should be updated often enough.