Wahlbeteiligung bei Europawahlen : eine empirische Studie zu Deutschland und Polen

In der Arbeit wird die Wahlbeteiligung bei Europawahlen analysiert. Es geht um die Beantwortung der Frage, ob die individuelle Wahlteilnahme in alten und neuen EU-Mitgliedsstaaten bzw. alten und jungen Demokratien auf die gleichen Erklärungsgrößen zurückgeht oder ob möglicherweise Unterschiede zwischen beiden Ländergruppen bestehen. rnAls Bezugspunkt dient die Europawahl, die im Juni 2009 stattfand: Bei dieser Wahl fällt nicht nur die generell niedrige Beteiligung auf, sondern auch erhebliche Niveauunterschiede zwischen den einzelnen Mitgliedsstaaten. Um diesen Befund erklären zu können, wird zunächst ein theoretisches Erklärungsmodell entwickelt, das sich auf die folgenden fünf Dimensionen bezieht: politisches System der EU, europäische politische Gemeinschaft, Wählermobilisierung während des Europawahlkampfes, Gewohnheitswahl und Einschätzung der staatlichen sowie der eigenen wirtschaftlichen Lage. Als Erklärungsgröße werden in den fünf Bereichen jeweils unterschiedlich stark ausgeprägte Defizite in den beiden Ländergruppen angenommen. rnExemplarisch werden Deutschland und Polen untersucht. Die empirischen Analysen basieren auf dem umfangreichen Datensatz der European Election Study 2009 (ESS), hier werden die Daten der Voter Study verwendet. Nicht alle Hypothesen lassen sich im Rahmen der Arbeit bestätigten, nur ein Teil der unabhängigen Variablen hat auch im multivariaten Modell noch einen Einfluss auf die Europawahlbeteiligung. rnFür Deutschland zeigen die Ergebnisse, dass Wahlnorm und Wählermobilisierung einen größeren Effekt auf die Stimmabgabe ausüben als die Nutzenseite (Effektivität) der Wahlen. Im zweiten Modell, das für die polnischen Befragten berechnet wurde, erweisen sich nur zwei der unabhängigen Variablen als signifikant, d.h. nur die Einschätzung der Effektivität der Wahl und die internalisierte Wahlnorm haben einen Einfluss auf die Wahlteilnahme. Von der Effektivitätseinstufung geht eine größere Erklärungskraft aus als von der Wahlnorm; in diesem Modell überwiegt folglich die Nutzenseite der Europawahl. Es kann gezeigt werden, dass die unterschiedlichen Beteiligungsraten in den beiden Staaten durch unterschiedlich stark ausgeprägte Defizite in den Bereichen des politischen Systems und der Wahlnorm zustande kommen. Die Defizite sind in Polen stärker ausgeprägt und können so die niedrigere Wahlbeteiligung erklären. Darüber hinaus kann resümiert werden, dass die Nutzenseite der Europawahl in Polen einen stärkeren Einfluss auf die Beteiligung ausübt als in Deutschland.

Caratterizzazione e simulazione di processi di colata in sabbia di ghise sferoidali

L’oggetto principale delle attività di tesi è la caratterizzazione numerico-sperimentale di processi di colata in sabbia di ghisa sferoidale. Inizialmente è stata effettuata un’approfondita indagine bibliografica per comprendere appieno le problematiche relative all’influenza dei parametri del processo fusorio (composizione chimica, trattamento del bagno, velocità di raffreddamento) sulle proprietà microstrutturali e meccaniche di getti ottenuti e per valutare lo stato dell’arte degli strumenti numerici di simulazione delle dinamiche di solidificazione e di previsione delle microstrutture. Sono state definite, realizzate ed impiegate attrezzature sperimentali di colata per la caratterizzazione di leghe rivolte alla misura ed alla differenziazione delle condizioni di processo, in particolare le velocità di raffreddamento, ed atte a validare strumenti di simulazione numerica e modelli previsionali. Inoltre sono stati progettati ed impiegati diversi sistemi per l’acquisizione ed analisi delle temperature all’interno di getti anche di grandi dimensioni. Lo studio, mediante analisi metallografica, di campioni di materiale ottenuto in condizioni differenziate ha confermato l’effetto dei parametri di processo considerati sulle proprietà microstrutturali quali dimensioni dei noduli di grafite e contenuto di ferrite e perlite. In getti di grandi dimensioni si è riscontrata anche una forte influenza dei fenomeni di macrosegregazione e convezione della lega su microstrutture e difettologie dei getti. Le attività si sono concentrate principalmente nella simulazione numerica FEM dei processi fusori studiati e nell’impiego di modelli empirico-analitici per la previsione delle microstrutture. I dati misurati di temperature di processo e di microstrutture sono stati impiegati per la validazione ed ottimizzazione degli strumenti numerici previsionali impiegati su un ampio intervallo di condizioni di processo. L’impiego di strumenti affidabili di simulazione del processo fusorio, attraverso l’implementazione di correlazioni sperimentali microstrutture-proprietà meccaniche, permette la valutazione di proprietà e difettologie dei getti, fornendo un valido aiuto nell’ottimizzazione del prodotto finito e del relativo processo produttivo.

La rappresentazione cinematografica del mondo agropastorale nel documentario corto italiano (1939 - 1969)

L’obiettivo primario di questo lavoro è quello di esplorare un insieme di documentari corti italiani di tipo etnografico e sociologico. Questi film hanno ricevuto pochissima attenzione critica, mentre sono essenziali alla comprensione del periodo di storia italiana compreso fra gli ultimi anni del Regime fascista e la fine del “Miracolo economico”. La prima parte della tesi è dedicata alla descrizione del contesto economico, sociologico, politico in cui questi lavori sono stati prodotti. La seconda parte si concentra su circa un centinaio di documentari corti analizzati sulla base di tre diversi criteri. Innanzitutto li abbiamo considerati a partire da un punto di vista autoriale, secondariamente a partire dalle loro caratteristiche produttive e distributive e infine sulla base di un criterio regionale. A partire dalla discussione antropologica coeva riguardante la scomparsa dei mondi contadini e su una precisa ricerca d’archivio focalizzata sullo stesso tema, abbiamo poi comparato il risultato dell’analisi del corpus con altre forme filmiche di rappresentazione dello stesso soggetto. Oltre a far riemergere un gruppo di autori e film quasi dimenticati, questo lavoro intende lanciare uno sguardo sul veloce, conflittuale e sbilanciato cambiamento compreso fra i mondi rurali tradizionali e la modernità, che ha caratterizzato la società italiana degli anni Cinquanta e Sessanta.

Studio ed ottimizzazione di processi per la produzione di membrane ceramiche per la separazione di idrogeno

Questa tesi descrive l’attività scientifica svolta presso l’istituto CNR-ISTEC di Faenza. Lo scopo è stato lo studio e l’ottimizzazione del processo per la realizzazione di una membrana ceramica permselettiva all’idrogeno usufruibile in applicazioni industriali. Grazie alle prove effettuate è stata possibile la realizzazione tramite colaggio su nastro dei due strati ceramici che formano la membrana: un supporto poroso e un film sottile e denso. I nastri, dopo essiccamento, sono stati tagliati con la geometria desiderata, impilati uno sull’altro, termocompressi e sinterizzati. L’attività svolta ha permesso l’ingegnerizzazione di una membrana ad elevato contenuto tecnologico con le proprietà necessarie per poter essere impiegata in un processo di purificazione di idrogeno più semplice, efficiente ed economico rispetto a quelli utilizzati fino ad ora.

Studio e ricostruzione delle distribuzioni granulometriche interne al grano in motori a propellente solido

The main purposes of this essay were to investigate in detail the burning rate anomaly phenomenon, also known as "Hump Effect", in solid rocket motors casted in mandrel and the mechanisms at the base of it, as well as the developing of a numeric code, in Matlab environment, in order to obtain a forecasting tool to generate concentration and orientation maps of the particles within the grain. The importance of these analysis is due to the fact that the forecasts of ballistics curves in new motors have to be improved in order to reduce the amount of experimental tests needed for the characterization of their ballistic behavior. This graduate work is divided into two parts. The first one is about bidimensional and tridimensional simulations on z9 motor casting process. The simulations have been carried out respectively with Fluent and Flow 3D. The second one is about the analysis of fluid dynamic data and the developing of numeric codes which give information about the concentration and orientation of particles within the grain based on fluid strain rate information which are extrapolated from CFD software.

Preparazione e proprietà di trasporto di gas di membrane a base di polimeri e nanoplatelets grafenici per la cattura di CO2 da processi energetici

Lo scopo di questo studio sperimentale è stato quello di determinare l’effetto dell’aggiunta di piccole quantità (1wt%) di grafene e ossido di grafene al poli(1-trimetilsilil-1-propino) (PTMSP). Il PTMSP è uno dei polimeri più promettenti per la separazione di gas tramite membrane polimeriche grazie al suo elevato volume libero (26%). Sono state studiate sia membrane spesse (60-180 micron) preparate per solvent casting che sottili (2-10 micron) preparate per spin coating supportate su un film poroso di polipropilene commerciale. L’ossido di grafene aumenta la permeabilità del PTMSP, mentre il grafene ha mostrato un comportamento variabile in funzione del protocollo di preparazione che è risultato dipendere fortemente dalla velocità di evaporazione del solvente. Le membrane così ottenute sono state testate al permeometro. È stata osservata una dipendenza della permeabilità in funzione dello spessore del film e del grado di invecchiamento. In particolare, la presenza di nanofiller riduce il grado di invecchiamento dei film di PTMSP. Nel caso specifico della coppia di gas permeanti He/CO2, i campioni hanno mostrato un comportamento intercambiabile di selettività all’He o alla CO2, modulabile in funzione della temperatura tra 30-60°C e del filler utilizzato.

Spatial and functional relationships between air conduits and blood capillaries in the pulmonary gas exchange tissue of adult and developing chickens

The documented data regarding the three-dimensional structure of the air capillaries (ACs), the ultimate sites of gas exchange in the avian lung is contradictory. Further, the mode of gas exchange, described as cross-current has not been clearly elucidated. We studied the temporal and spatial arrangement of the terminal air conduits of the chicken lung and their relationship with the blood capillaries (BCs) in embryos as well as the definitive architecture in adults. Several visualization techniques that included corrosion casting, light microscopy as well as scanning and transmission electron microscopy were used. Two to six infundibulae extend from each atrium and give rise to numerous ACs that spread centrifugally. Majority of the ACs are tubular structures that give off branches, which anastomose with their neighboring cognates. Some ACs have globular shapes and a few are blind-ending tapering tubes. During inauguration, the luminal aspects of the ACs are characterized by numerous microvillus-like microplicae, which are formed during the complex processes of cell attenuation and canalization of the ACs. The parabronchial exchange BCs, initially inaugurated as disorganized meshworks, are reoriented via pillar formation to lie predominantly orthogonal to the long axes of the ACs. The remodeling of the retiform meshworks by intussusceptive angiogenesis essentially accomplishes a cross-current system at the gas exchange interface in the adults, where BCs form ring-like patterns around the ACs, thus establishing a cross-current system. Our findings clarify the mode of gas exchange in the parabronchial mantle and illuminate the basis for the functional efficiency of the avian lung.

Learning My Lessons: Research, Rehearsal, and Reflection on the Greats

A successful actor often requires a specific acting method or style to enhance their performance. Through theatrical research, rehearsal and performance, an actor can narrow down their seemingly endless search for the most productive methodology. By researching, studying, and applying the methods of Constantin Stanislavski, Stella Adler,and Tadashi Suzuki to my rehearsal process, I have found my most effective acting style: Stella Adler?s method. I utilize this acting method during the performance period of my early professional acting career. Experimental research for this thesis was completed inthe studio. I applied each of the three aforementioned methods to a dramatic/classical monologue. The results I gathered helped me to decide upon Adler?s methodology to carry with me through my upcoming professional auditions and career. From casting resulting from the auditions, I will employ the methodology to my professional work asan actress. Each acting teacher has provided the performance world with a new way to experience their stage time. The methods are unique and enable the actor to find the most dynamic performance through engaging technical skill.

Botulinum Toxin Type A for the Treatment of Equinus Deformity in to Patients With Mucopolysaccharidosis Type II

Mucopolysaccharidoses are lysosomal storage disorders that are caused by a deficiency in the enzymes that degrade glycosaminoglycans. The accumulation of glycosaminoglycans affects multiple systems, resulting in coarse facial features, short stature, organomegaly, and variable neurological changes from normal intelligence to severe mental retardation and spasticity. Effects on the musculoskeletal system include dysostosis multiplex, joint stiffness, and muscle shortening. This article reports 2 patients with mucopolysaccharidosis type II (Hunter syndrome) who showed progressive equinus deformity of the feet. Both patients were treated with intramuscular botulinum toxin type A injections in the gastrocnemius and the soleus muscles, followed by serial casting. In both patients, passive range of motion, muscle tone, and gait performance were significantly improved. Botulinum toxin type A injections followed by serial casting are a therapeutic option for contractures in patients with mucopolysaccharidosis. However, the long-term effects and the effect of application in other muscles remain unknown.

VEGF over-expression in skeletal muscle induces angiogenesis by intussusception rather than sprouting

Therapeutic over-expression of vascular endothelial growth factor (VEGF) can be used to treat ischemic conditions. However, VEGF can induce either normal or aberrant angiogenesis depending on its dose in the microenvironment around each producing cell in vivo, which limits its clinical usefulness. The goal herein was to determine the cellular mechanisms by which physiologic and aberrant vessels are induced by over-expression of different VEGF doses in adult skeletal muscle. We took advantage of a well-characterized cell-based platform for controlled gene expression in skeletal muscle. Clonal populations of retrovirally transduced myoblasts were implanted in limb muscles of immunodeficient mice to homogeneously over-express two specific VEGF(164) levels, previously shown to induce physiologic and therapeutic or aberrant angiogenesis, respectively. Three independent and complementary methods (confocal microscopy, vascular casting and 3D-reconstruction of serial semi-thin sections) showed that, at both VEGF doses, angiogenesis took place without sprouting, but rather by intussusception, or vascular splitting. VEGF-induced endothelial proliferation without tip-cell formation caused an initial homogeneous enlargement of pre-existing microvessels, followed by the formation of intravascular transluminal pillars, hallmarks of intussusception. This was associated with increased flow and shear stress, which are potent triggers of intussusception. A similar process of enlargement without sprouting, followed by intussusception, was also induced by VEGF over-expression through a clinically relevant adenoviral gene therapy vector, without the use of transduced cells. Our findings indicate that VEGF over-expression, at doses that have been shown to induce functional benefit, induces vascular growth in skeletal muscle by intussusception rather than sprouting.

Mate Expulsions in Females Across the Menstrual Cycle

Female mate preferences are complex due to their greater selectivity in mates according to the good genes sexual selection theory. Additionally, research shows that female’s behaviors and mate preferences change cyclically due to the importance of attracting amate when conception risk is highest. However, research has not examined whether there is a relationship between menstrual cycle changes and mate expulsion (the casting off of a mate or ending a relationship). The present research examined whether fertility riskaffects mate expulsion decisions. Female participants completed a questionnaire which included demographic questions, such as information about the length and date of their menstrual cycle, mate expulsion scenarios, and a social desirability scale. Effects ofcurrent relationship status (a demographic measure) were also examined. If fertility risk does have an influence, the following patterns were hypothesized. High fertility women will be less likely to expel their mate due to an increased chance of conception and a need for access to parental investment resources from their mate. The results obtained indicate that fertility risks do not influence female’s decisions to expel their mates. Current relationship status in conjunction with fertility risk does affect mate expulsion. Thesefindings are discussed in terms of prior research and evolutionary theory.

Running in Heels: an Analysis of Advertisements By Female Senate Candidates

Female candidates have become more successful in the political arena, specifically in the United States Senate. Today, females make up twenty percent of the total Senate seats. Despite this increase, females are still underrepresented in Washington. As such, understanding the roadblocks to equality will help us achieve parity. In an attempt to understand various challenges that female senatorial candidates face, this project looks at a specific element of their campaign, TV advertisements. Assessing candidate advertisements will help us understand whether gender affects strategic campaign decisions. Specifically, this project investigates the relationship between candidate gender and casting and setting of TV advertisements. Does gender influence the makeup of political ad spots? In order to understand this relationship more completely, I employ both quantitative data and case study analysis for same-gender and mixed-gender primary and general election contests in 2004 and 2008. Ultimately, candidate gender has little to no effect on casting of senatorial advertisements across both election cycles. Despite this variation in casting, we observe consistent findings across three settings, the political setting, the home setting, and the neighborhood setting. In both 2004 and 2008, female candidates use smaller proportions of ad frames with the political setting in comparison to their male counterparts. Female candidates in both election cycles also employed greater proportions of ad frames with the home and neighborhood setting compared to male candidates. These discrepancies point to a distinction in advertisement strategy depending on gender of the candidate.

3D documentation of footwear impressions and tyre tracks in snow with high resolution optical surface scanning

The three-dimensional documentation of footwear and tyre impressions in snow offers an opportunity to capture additional fine detail for the identification as present photographs. For this approach, up to now, different casting methods have been used. Casting of footwear impressions in snow has always been a difficult assignment. This work demonstrates that for the three-dimensional documentation of impressions in snow the non-destructive method of 3D optical surface scanning is suitable. The new method delivers more detailed results of higher accuracy than the conventional casting techniques. The results of this easy to use and mobile 3D optical surface scanner were very satisfactory in different meteorological and snow conditions. The method is also suitable for impressions in soil, sand or other materials. In addition to the side by side comparison, the automatic comparison of the 3D models and the computation of deviations and accuracy of the data simplify the examination and delivers objective and secure results. The results can be visualized efficiently. Data exchange between investigating authorities at a national or an international level can be achieved easily with electronic data carriers.

Snake venom C-type lectins interacting with platelet receptors. Structure-function relationships and effects on haemostasis

Snake venoms contain components that affect the prey either by neurotoxic or haemorrhagic effects. The latter category affect haemostasis either by inhibiting or activating platelets or coagulation factors. They fall into several types based upon structure and mode of action. A major class is the snake C-type lectins or C-type lectin-like family which shows a typical folding like that in classic C-type lectins such as the selectins and mannose-binding proteins. Those in snake venoms are mostly based on a heterodimeric structure with two subunits alpha and beta, which are often oligomerized to form larger molecules. Simple heterodimeric members of this family have been shown to inhibit platelet functions by binding to GPIb but others activate platelets via the same receptor. Some that act via GPIb do so by inducing von Willebrand factor to bind to it. Another series of snake C-type lectins activate platelets by binding to GPVI while yet another series uses the integrin alpha(2)beta(1) to affect platelet function. The structure of more and more of these C-type lectins have now been, and are being, determined, often together with their ligands, casting light on binding sites and mechanisms. In addition, it is relatively easy to model the structure of the C-type lectins if the primary structure is known. These studies have shown that these proteins are quite a complex group, often with more than one platelet receptor as ligand and although superficially some appear to act as inhibitors, in fact most function by inducing thrombocytopenia by various routes. The relationship between structure and function in this group of venom proteins will be discussed.

In vitro fracture strength and thermal shock resistance of metal-ceramic crowns with cast and machined AuTi frameworks

STATEMENT OF PROBLEM: AuTi alloys with 1.6% to 1.7% (wt%) Ti provide sufficient bond strength to veneering ceramics, but the strength of entire metal-ceramic restorations fabricated from these alloys is not known. However, this information is important to assess the clinical performance of such materials. PURPOSE: This in vitro study evaluated the fracture strength and thermal shock resistance of metal-ceramic crowns with AuTi frameworks produced by milling or casting. MATERIAL AND METHODS: Frameworks of the alloy Au-1.7Ti-0.1Ir (wt%) (Esteticor Vision) were produced by milling or casting (test groups). A high-gold alloy (Esteticor Special) was used as the control. The frameworks were veneered with ceramic (VMK 95). Specimens (n=7) were loaded until fracture. Loads at failure (N) were recorded and the mean values statistically evaluated using 1-way analysis of variance and a post hoc Dunnett test (alpha=.05). To assess the crazing resistance of the veneering ceramic, 6 additional crowns of each group were subjected to a thermal shock test. Fractured surfaces were documented by scanning electron microscopy. Coefficients of thermal expansion of the materials used were measured (n=2) to assess the thermal compatibility between alloys and ceramic. RESULTS: The mean fracture strength of the crowns with machined AuTi frameworks (1294 +/- 236 N) was significantly lower (P=.012) than that of the cast AuTi frameworks (1680 +/- 150 N), but statistically not different than the high-gold alloy (1449 +/- 159 N). Bonding failure to the AuTi alloy predominantly occurred at the alloy-oxide interface. For the high-gold alloy, more ceramic residues were observed. In the thermal shock test, crowns with milled AuTi frameworks showed significantly higher thermal shock resistance compared to the other groups. The coefficients of thermal expansion (Esteticor Vision cast: 14.5 microm/m.K; Esteticor Vision milled: 14.3 microm/m.K; Esteticor Special cast: 13.7 microm/m.K) did not correlate with the results of the thermal shock test. CONCLUSION: The in vitro fracture strength of crowns with milled AuTi frameworks is lower than that obtained with cast AuTi frameworks, but comparable to those crowns produced with a high-gold alloy.