Transit route occupancy load factor and passenger average travel time for quality of service assessment

This paper investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Transit route occupancy load factor and passenger average travel time for quality of service assessment

This presentation investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

A recommendation system for predicting risks across multiple business process instances

This paper proposes a recommendation system that supports process participants in taking risk-informed decisions, with the goal of reducing risks that may arise during process execution. Risk reduction involves decreasing the likelihood and severity of a process fault from occurring. Given a business process exposed to risks, e.g. a financial process exposed to a risk of reputation loss, we enact this process and whenever a process participant needs to provide input to the process, e.g. by selecting the next task to execute or by filling out a form, we suggest to the participant the action to perform which minimizes the predicted process risk. Risks are predicted by traversing decision trees generated from the logs of past process executions, which consider process data, involved resources, task durations and other information elements like task frequencies. When applied in the context of multiple process instances running concurrently, a second technique is employed that uses integer linear programming to compute the optimal assignment of resources to tasks to be performed, in order to deal with the interplay between risks relative to different instances. The recommendation system has been implemented as a set of components on top of the YAWL BPM system and its effectiveness has been evaluated using a real-life scenario, in collaboration with risk analysts of a large insurance company. The results, based on a simulation of the real-life scenario and its comparison with the event data provided by the company, show that the process instances executed concurrently complete with significantly fewer faults and with lower fault severities, when the recommendations provided by our recommendation system are taken into account.

Exploring association between perceived importance of travel/traffic information and travel behaviour in natural disasters : a case study of the 2011 Brisbane floods

A sound understanding of travellers’ behavioural changes and adaptation when facing a natural disaster is a key factor in efficiently and effectively managing transport networks at such times. This study specifically investigates the importance of travel/traffic information and its impact on travel behaviour during natural disasters. Using the 2011 Brisbane flood as a case study, survey respondents’ perceptions of the importance of travel/traffic information before, during, and after the flood were modelled using random-effects ordered logit. A hysteresis phenomenon was observed: respondents’ perceptions of the importance of travel/traffic information increased during the flood, and although its perceived importance decreased after the flood, it did not return to the pre-flood level. Results also reveal that socio-demographic features (such as gender and age) have a significant impact on respondents’ perceptions of the importance of travel/traffic information. The roles of travel time and safety in a respondent’s trip planning are also significantly correlated to their perception of the importance of this information. The analysis further shows that during the flood, respondents generally thought that travel/traffic information was important, and adjusted their travel plans according to information received. When controlling for other factors, the estimated odds of changing routes and cancelling trips for a respondent who thought that travel/traffic information was important, are respectively about three times and seven times the estimated odds for a respondent who thought that travel/traffic information was not important. In contrast, after the flood, the influence of travel/traffic information on respondents’ travel behaviour diminishes. Finally, the analysis shows no evidence of the influence of travel/traffic information’s on respondents’ travel mode; this indicates that inducing travel mode change is a challenging task.

Make-or-break : work and family interface and wellbeing among small business owners

This study responds to calls for research on work-family aspects in entrepreneurship research. Our study examined the role of work-family conflict and enhancement on small business owners’ (SBOs) wellbeing. We found work-family has negative direct effect on mental health, job and family satisfactions. Furthermore, we found that under high level of work-family conflict condition, SBOs who perceive a greater level of work-family enhancement would feel more satisfy with their life, job as well as family aspects. Interestingly, under high level of conflict, even SBOs perceive greater level of enhancement, it would not lessen the negative impact of the conflict on their mental health. These results suggest that once psychological health is harmed by work-family conflict, its negative consequences remain unchanged.

Virtual business role-play : leveraging familiar environments to prime stakeholder memory during process elicitation

Business process models have traditionally been an effective way of examining business practices to identify areas for improvement. While common information gathering approaches are generally efficacious, they can be quite time consuming and have the risk of developing inaccuracies when information is forgotten or incorrectly interpreted by analysts. In this study, the potential of a role-playing approach for process elicitation and specification has been examined. This method allows stakeholders to enter a virtual world and role-play actions as they would in reality. As actions are completed, a model is automatically developed, removing the need for stakeholders to learn and understand a modelling grammar. Empirical data obtained in this study suggests that this approach may not only improve both the number of individual process task steps remembered and the correctness of task ordering, but also provide a reduction in the time required for stakeholders to model a process view.

The United Nations Guiding Principles on Business and Human Rights : Putting Accounting for Human Rights into Practice

The “Guiding Principles on Business and Human Rights: Implementing the United Nations ‘Protect, Respect and Remedy Framework’” (the Guiding Principles), endorsed by The United Nations Human Rights Council on 16 June 2011, outline obligations for nation states that currently exist under international law and provide the first authoritative reference point for corporations’ human rights responsibilities. Of the 30 principles endorsed, half relate directly to business. The Guiding Principles have far-reaching implications for all businesses, both small and large, and represent one of the most significant developments in corporate governance this century. In response to a recognition of the potential impacts of the Guiding Principles on corporate governance, the Institute of Chartered Accountants in Australia provided La Trobe Business School with grant funding to undertake groundbreaking research on the implications of the Guiding Principles for management and accounting systems within corporate Australia. This report represents the outcome of the study.

On Merging Business Process Management and Geographic Information Systems : Modeling and Execution of Ecological Concerns in Processes

Business Process Management describes a holistic management approach for the systematic design, modeling, execution, validation, monitoring and improvement of organizational business processes. Traditionally, most attention within this community has been given to control-flow aspects, i.e., the ordering and sequencing of business activities, oftentimes in isolation with regards to the context in which these activities occur. In this paper, we propose an approach that allows executable process models to be integrated with Geographic Information Systems. This approach enables process models to take geospatial and other geographic aspects into account in an explicit manner both during the modeling phase and the execution phase. We contribute a structured modeling methodology, based on the well-known Business Process Model and Notation standard, which is formalized by means of a mapping to executable Colored Petri nets. We illustrate the feasibility of our approach by means of a sustainability-focused case example of a process with important ecological concerns.

Tourism advertisement management and effective tools in tourism industry

The definition of tourism “is the travel for recreational, leisure, family or business purposes, usually of a limited duration. Tourism is commonly associated with trans-national travel, but may also refer to travel to another location within the same country”. Tourism as an industry, in today’s modern language is a means of global communication between nations and travelers of all countries, introducing them to the various cultures and societies abroad, as well there history, ancient, historical sites, and languages. Hence, advertising overall has become a tool of necessity in this ever-growing global industry. Given that, tourism is a part of the infrastructure of any country’s economy the growth and development of tourism is of great importance. Advertising plays a vital and is a crucial tool in developing the countries tourism by attractively presenting the nations points-of-interests, historical and cultural. Advertising has a central role in expanding this industry, generating economic growth in this area, as well as creating direct and indirect employment, but most importantly a creative innovating competition in the national and international travel industry. Importantly, to achieve a successful tourist industry, the Travel Agencies and governmental offices of the Ministry’s of Tourism and Business must work hand-in-hand to attain these goals. This article shows the impact of the various media and advertising methods used in tourism, which assisted in identifying the correct tool for expanding the country’s industry of tourism. The results of this study illustrated that the appropriate tools for promotional strategies to attract domestic and foreign traveler’s, found to be the most effective were, handbook, internet advertising, TV, brochures, newspapers

Understanding, utilizing and valuing design tools in business

This chapter examines the tools and activities (referred to as approaches) used by a catalyst while facilitating a design-led transformation within an Australian manufacturing small to medium enterprise (SME). Design-led innovation (DLI) aids the use of design at a higher strategic level; however few existing studies investigate the relative influence of approaches used by a catalyst while helping a firm to make a transition in the utilisation of design, specifically from a styling tool to a strategic process. This paper identifies the triggers to encouraging a shift toward understanding, utilising and valuing the business level outcomes of design through a range of design tools and activities within the participating company. Through a 12 month action research program, staff interviews and a reflective journal were utilised as data collection techniques to assess the successfulness of the approaches used during this project. It was found that, through the use of both successful and unsuccessful approaches, the catalyst achieved two key outcomes within the firm: 1) Improvements in the firm’s ability to challenge internal assumptions and standard practices; and 2) the creation of an informed and accurate awareness of company and industry issues. Approaches that made a higher impact of the firm were deemed successful, and were generally relatable to the task at hand, as perceived by employees. Additionally, the sequence in which the approaches were utilised was found to have a direct influence on their successfulness. Learnings from this research will assist future catalysts to facilitate a design-led transformation within a manufacturing SME through the use of design tools and activities with greater effectiveness.