971 resultados para Bromide
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pristimerin has been shown to be cytotoxic to several cancer cell lines. In the present work, the cytotoxicity of pristimerin was evaluated in human tumor cell lines and in human peripheral blood mononuclear cells (PBMC). This work also examined the effects of pristimerin (0.4; 0.8 and 1.7 mu M) in HL-60 cells, after 6, 12 and 24 h of exposure. Pristimerin reduced the number of viable cells and increased number of non-viable cells in a concentration-dependent manner by tripan blue test showing morphological changes consistent with apoptosis. Nevertheless, pristimerin was not selective to cancer cells, since it inhibited PBMC proliferation with an IC50 of 0.88 PM. DNA synthesis inhibition assessed by 5-bromo-2'-deoxyuridine (BrdU) incorporation in HL-60 cells was 70% and 83% for the concentrations of 0.4 and 0.8 mu M, respectively. Pristimerin (10 and 20 mu M) was not able to inhibit topoisomerase 1. In AO/EB (acridine orange/ethidium bromide) staining, all tested concentrations reduced the number of HL-60 viable cells, with the occurrence of necrosis and apoptosis in a concentration-dependent manner, results in agreement with trypan blue exclusion findings. The analysis of membrane integrity and internucleosomal DNA fragmentation by flow cytometry in the presence of pristimerin indicated that treated cells underwent apoptosis. The present data point to the importance of pristimerin as representative of an emerging class of potential anticancer chemicals, exhibiting an antiproliferative effect by inhibiting DNA synthesis and triggering apoptosis. (c) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Este artigo apresenta uma área de pesquisa atual, ativa e interessante. Descreve a investigação da química de transferência de elétrons (TE) de um modo geral e resultados de TE em DNA em particular. Dois intercalantes de DNA foram utilizados: Ethidium Bromide como doador (D) e Methyl-viologen como receptor (A), o primeiro intercala-se entre as bases do DNA e o último na sua superfície. Utilizando o modelo de Perrin e medidas de Supressão de Fluorescência obteve-se a distância de migração do elétron; aqui a distância foi considerada o espaçamento linear entre as moléculas de doador e receptor ao longo da molécula de DNA. O valor determinado foi de 22,6 ± 1,1 angstrons e o número de pares de bases entre doador e receptor de 6,6. Na literatura os valores encontrados foram de 26 angstrons e de quase 8 pares de bases. Considera-se que a transferência de elétrons em DNA seja mediada através das interações através do espaço entre os elétrons do tipo p contido nos pares de bases.
Resumo:
A microbiota do solo é de grande importância no desenvolvimento de culturas. Os métodos de controle, químico (brometo de metila) e físico (solarização), alteram essa microbiota. O presente trabalho objetivou estudar o comportamento da comunidade de fungos em solo solarizado e fumigado (brometo de metila). O delineamento experimental foi de blocos ao acaso, com três tratamentos (solarização, brometo de metila e testemunha) e sete repetições. A comunidade de fungos do solo foi avaliada de forma quantitativa e qualitativa, em três momentos (antes, durante e após a solarização) com amostras coletadas de três profundidades (0-5; 10-15 e 20-25 cm). Durante a solarização ocorreu uma redução na comunidade de fungos do solo, em termos quantitativos, em todas as camadas amostradas. No entanto, essa diminuição foi mais significativa na camada superficial (0-5cm). em termos qualitativos, a solarização reduziu também o número de diferentes espécies de fungos do solo, mas na camada de 20-25 cm, essa diminuição foi a zero aos 56 dias de avaliação. A recolonização da microbiota do solo, em termos quantitativos, foi maior no tratamento com brometo de metila do que nos demais. Entretanto, esse aumento não foi o mesmo em termos qualitativos. Nos tratamentos solarizado e testemunha, o aumento na comunidade de fungos do solo foi acompanhado pela diversificação de espécies fúngicas.
Resumo:
A ocupação do cerrado para aumentar a produção agrícola tem gerado a degradação do solo e uma prática recomendada na revegetação dessas áreas é a introdução de espécies arbóreas. O objetivo do trabalho foi avaliar o crescimento (altura e massa fresca e seca de parte aérea), a atividade da fosfatase ácida foliar e colonização micorrízica de mudas de espécies arbóreas não nativas em solo de cerrado degradado. O trabalho foi desenvolvido em casa de vegetação em Ilha Solteira, empregando solo proveniente de uma área de cerrado degradado em processo de regeneração natural, localizada no município de Três Lagoas (MS). O solo, misturado com areia de rio (4:1), foi fumigado com brometo de metila e distribuído em sacos plásticos (2,5 L). Para o tratamento com inoculação de FMA, 100 g de solo inóculo (solo de área de cerrado preservado) foi depositado na superfície, logo após o transplante das mudas. Pelos resultados, Psidium guajava L. e Croton floribundus Spreng, seguidos por Tabebuia chrysotricha (Mart. ex DC) Standl) e Rapanea ferruginea (Ruiz et Pav) Mez., tiveram alta colonização radicular e foram altamente ou muito responsivas à micorrização, sugerindo seu potencial em projetos de revegetação no cerrado brasileiro ou no enriquecimento de áreas degradadas.
Resumo:
This paper describes 2 alternative methodologies for the determination of selected aldehydes (formaldehyde, acetaldehyde, propionaldehyde, acrolein, and benzaldehyde) by capillary electrophoresis (CE), the first approach is based on the formation of aldehyde-bisulfite adducts and employs free solution CE with reversed electroosmotic flow and indirect detection, using 10 mmol/L 3,5-dinitrobenzoic acid (pH 4.5) containing 0.2 mmol/L cetyltrimethylammonium bromide as the electrolyte. This novel methodology showed a fairly good sensitivity to concentration, with detection limits with respect to a single aldehyde on the order of 10-40 mu g/L, a reasonable analysis time (separation was achieved in <8 min), and no need for sample manipulation. A second approach was proposed in which 2,4-dinitrophenylhydrazine derivatives of the aldehydes were detected in a micellar electrolyte medium (20 mmol/L berate buffer containing 50 mmol/L sodium dodecyl sulfate and 15 mmol/L beta-cyclodextrin). This latter methodology included a laborious sample preconcentration step and showed much poorer sensitivity (0.5-2 mg/L detection limit, with respect to a single aldehyde), despite the use of sodium chloride to promote sample stacking. Both methodologies proved adequate to evaluate aldehyde levels in vehicular emissions. Samples from the tailpipe exhaust of a passenger car vehicle without a catalytic converter and operated with an ethanol-based fuel were collected and analyzed; the results showed high levels of formaldehyde and acetaldehyde (0.41-6.1 ppm, v/v). The concentrations estimated by the 2 methodologies, which were not in good agreement, suggest the possibility of striking differences in sample collection efficiency, which was not the concern of this work.
Resumo:
A pair of primers directed to 16S-23S rDNA interspacer (ITS) was designed directed to Brucella genetic sequences in order to develop a polymerase chain reaction (PCR) putatively capable of amplifying DNA from any Brucella species. Nucleic acid extracts from whole-blood from naive dogs were spiked with decreasing amounts of Brucella canis RM6/66 DNA and the resulting solutions were tested by PCR. In addition, the ability of PCR to amplify Brucella spp. genetic sequences from naturally infected dogs was evaluated using 210 whole-blood samples of dogs from 19 kennels. The whole-blood samples collected were subjected to blood culture and PCR. Serodiagnosis was performed using the rapid slide agglutination test with and without 2-mercaptoethanol. The DNA from whole blood was extracted using proteinase-K, sodium dodecyl sulphate and cetyl trimethyl ammonium bromide followed by phenol-chloroform purification. The PCR was capable of detecting as little as 3.8 fg of Brucella DNA mixed with 450 ng of host DNA. Theoretically, 3.8 fg of Brucella DNA represents the total genomic mass of fewer than two bacterial cells. The PCR diagnostic sensitivity and specificity were 100%. From the results observed in the present study, we conclude that PCR could be used as confirmatory test for diagnosis of B. canis infection.
Resumo:
MCM-41 material was synthesized starting from hydrogel containing colloidal fumed silica, sodium silicate, cetyltetramethylammonium bromide (CTMABr) as surfactant, and distilled water as solvent. These reactants were mixed to obtain a gel with the following composition: 4SiO(2):1Na(2)O:1CTMABr:200H(2)O. The hydrogel with pH=14 was hydrothermally treated at 100 degreesC, for 4 days. Each day, the pH was measured, and then adjusted to 9.5-10 by using 30% acetic acid solution. Thermogravimetry was the main technique, which was used to monitor the participation of the surfactant on the MCM-41 nanophase, being possible to determine the temperature ranges relative to water desorption as well as the surfactant decomposition and silanol condensation.
Resumo:
Products from the spontaneous reaction of a long-chain arenediazonium salt, 2,6-dimethyl-4-hexadecylbenzenediazonium tetrafluoroborate(16-ArN2BF4), in aqueous micellar solutions of sodium dodecyl sulfate (SDS)? are used to estimate the local concentration of chloride and bromide ions at the micellar surface. The arenediazonium ion, 16-ArN2+, which is totally bound to the SDS micelle, reacts by rate-determining loss of N-2 to give an aryl cation that traps available nucleophiles, i,e., H2O, Cl-, and Br-, to give stable phenol, 16-ArOH, and halobenzene products, 16-ArCl and 16-ArBr, respectively. Product yields, determined by HPLC, are related to local concentrations using calibration curves obtained from independent standards. The local concentrations determined by this method are consistent with co-ion concentrations calculated, using a cell model, by numerical integration of the Poisson-Boltzmann equation (PBE) taking into account salt-induced micellar growth. The salt dependence of the intel facial concentrations of Cl- and Br- are identical. indicating no specific interactions in the interfacial co-ion compartment. PBE calculations predict that, in micellar SDS, increasing the concentration of a particular halide salt (NaX) at constant concentration of another halide (NaY) should result in an increase in the local concentrations of both co-ions. Using this chemical-trapping method, this prediction was demonstrated experimentally.
Resumo:
With the purpose of enhancing the efficacy of microparticle-encapsulated therapeutic agents, in this study we evaluated the phagocytic ability of rat peritoneal exudate cells and the preferential location of poly(D,L-lactide-co-glycolic acid) (PLGA) microparticles inside these cells. The microparticles used were produced by a solvent evaporation method and were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Size distribution analysis using DLS and SEM showed that the particles were spherical, with diameters falling between 0.5 and 1.5 mu m. Results from cell adhesion by SEM assay, indicated that the PLGA microparticles are not toxic to cells and do not cause any distinct damage to them as confirmed by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay. Among the large variety of cell populations found in the peritoneal exudates (neutrophils, eosinophils, monocytes, and macrophages), TEM showed that only the latter phagocytosed PLGA microparticles, in a time-dependent manner. The results obtained indicate that the microparticles studied show merits as possible carriers of drugs for intracellular delivery.
Resumo:
(1) C11H17IN2STe, Mr = 463.83, P2(1)/n, a 7.6582(8), b = 13.8008(9), c = 15.026(3) angstrom, beta = 96.233(12)degrees, Z = 4, R-1 = 0.0318. (2) C15H19IN2STe, Mr = 513.88, P2(1)/n, a = 8.434(5), b = 11.697(5), c = 18.472(5) angstrom, beta = 98.556(5)degrees, Z = 4, R-1 = 0.0236. The synthesis of the aryltellurenyl N,N',-tetramethylthiourea (tmtu) iodide has been performed by ligand exchange with potassium iodide and the corresponding aryltellurenyl(tmtu) bromide. In both structures the tellurium atom is primarily three-coordinated, being bonded to a carbon atom of the organic ring and, in directions nearly perpendicular to the Te-C bond, to one tmtu sulfur atom and one iodine. In addition there are Te...secondary bonds, joining the molecules in centrosymmetric dimers, which in turn are joined through C-H...1 and C-H... S interactions, in (1) and (2), respectively.