Formation of supply chain collaboration and firm performance in the Thai automotive and electronics industries

This paper examines factors that encourage firms to go into supply chain collaborations (SCC) and relationships between SCC and supply chain performances (SCP), using a questionnaire survey on Thai automotive and electronics industries in 2012. OLS regression results show firms established supplier evaluation and audit system, system of rewards for high-performance supplier and long-term transactions with their supply chain partners under a competitive pressure are more closely cooperate with these partners on information sharing and decision synchronization. Instrumental variables regression indicates SCC arisen from competitive pressure, supplier evaluation and audit, a system of rewards for high-performance supplier and long-term relationship causally influence SCP such as on-time delivery, responsiveness to fast procurement, flexibility to customer need, and profit.

Topological invariance and spatial scaling of surface roughness in two highly eroded zones of Mexico: a comparative study

The Fractal Image Informatics toolbox (Oleschko et al., 2008 a; Torres-Argüelles et al., 2010) was applied to extract, classify and model the topological structure and dynamics of surface roughness in two highly eroded catchments of Mexico. Both areas are affected by gully erosion (Sidorchuk, 2005) and characterized by avalanche-like matter transport. Five contrasting morphological patterns were distinguished across the slope of the bare eroded surface of Faeozem (Queretaro State) while only one (apparently independent on the slope) roughness pattern was documented for Andosol (Michoacan State). We called these patterns ?the roughness clusters? and compared them in terms of metrizability, continuity, compactness, topological connectedness (global and local) and invariance, separability, and degree of ramification (Weyl, 1937). All mentioned topological measurands were correlated with the variance, skewness and kurtosis of the gray-level distribution of digital images. The morphology0 spatial dynamics of roughness clusters was measured and mapped with high precision in terms of fractal descriptors. The Hurst exponent was especially suitable to distinguish between the structure of ?turtle shell? and ?ramification? patterns (sediment producing zone A of the slope); as well as ?honeycomb? (sediment transport zone B) and ?dinosaur steps? and ?corals? (sediment deposition zone C) roughness clusters. Some other structural attributes of studied patterns were also statistically different and correlated with the variance, skewness and kurtosis of gray distribution of multiscale digital images. The scale invariance of classified roughness patterns was documented inside the range of five image resolutions. We conjectured that the geometrization of erosion patterns in terms of roughness clustering might benefit the most semi-quantitative models developed for erosion and sediment yield assessments (de Vente and Poesen, 2005).

Integrated methodology for assessing the effects of geomorphological river restoration on fish habitat and riparian vegetation

Changes in the geomorphology of rivers have serious repercussions, causing losses in the dynamics and naturalness of their forms, going in many cases, from a type of meandering channel, with constant erosion and sedimentation processes, to a channelized narrow river with rigid and stable margins, where the only possibility of movement occurs in the vertical, causing the only changes in channel geometry occur in the river bed. On the other hand, these changes seriously affect the naturalness of the banks, preventing the development of riparian vegetation and reducing the cross connectivity of the riparian corridor. Common canalizations and disconnections of meanders increase the slope, and therefore speed, resulting in processes of regressive erosion, effect increased as a result of the narrowing of the channel and the concentration of flows. This process of incision may turn the flood plain to be "hung", being completely disconnected from the water table, with important consequences for vegetation. As an example of the effects of these changes, it has been chosen the case of the Arga River The Arga river has been channelized and rectified, as it passes along the meander RamalHondo and Soto Gil (Funes, Navarra). The effects on fish habitat and riparian vegetation by remeandering the Arga River are presented. and Ttwo very contrasting situationsrestoration hypothesis, in terms of geomorphology concerns, have been established to assess the effects these changes have on the habitat of one of the major fish species in the area (Luciobabus graellsii) and on the riparian vegetation. To accomplish this goal, it has been necessary to used the a digital elevation model provided by LIDAR flight, bathymetric data, flow data, as inputs, and a hydraulic simulation model 2D (Infoworks RS). The results obtained not only helped to evaluate the effects of the past alterations of geomorphologic characteristics, but also to predict fish and vegetation habitat responses to this type of changes.

Forest Hydrology, Soil Conservation and Green Barriers in Canary Islands

In volcanic islands, the rainfall regime and its torrential nature, together with the steep slopes and the soil types present are considered to be some of the main factors affecting forest hydrology and soil conservation. In such environments, rain regime is generally irregular and characterized by short and intense rainfalls, which could cause destructive flows at times, followed by long periods of rain absence. The volcanic nature of these islands have as a direct resultant steep slopes which influences the runoff volume and speed, as well as the amount of topsoil susceptible to be detached and transported downstream. The soil type also affects the susceptibility to erosion processes. Andisols are the most typical soil on volcanic islands. Their particularities derive their mineral constituents, called short-range-order products, which provide these soils with an increased structural stability, which in turn reduces their susceptibility to erosion. However, the land use changes and the environmental factors such as rain regime and steep slopes may be determinant factor in destabilizing these soils and ultimately a cause for soil erosion and runoffs, which become a threat to the population downstream. Green barriers have been traditionally used to prevent or reduce these processes, also to enhance the dew effect and the fog water collection, and as a firebreak which acts as a barrier to slow or stop the progress of a wildfire. Wooded species present and subsequently their performance have a major influence on their effectiveness. The use of this natural erosion and fire control methods on volcanic islands is discussed in this paper.

Improvement of compatibility and stability on polyethylene-modified bitumen by use of an aromatic extra as compatibilizer.

Bitumen modification by polyethylene addition usually improves the mechanical properties of the binder and, therefore, the behavior in service of the bituminous mix: thermal susceptibility and rutting can be diminished, whilst the resistance to low temperature cracking may increase. To achieve this improvement it is necessary a good compatibility between the base bitumen and the polyethylene. Low compatibility between bitumen and polyethylene can lead to phase separation: the polymer- asphalt incompatibility translates into a deterioration of ultimate properties. The object of this research project was to determine if these problems can be diminished by using certain compatibilizer agents, e.g. an aromatic extract from the oil refinery. Compatibility and stability of the polyethylene modified bitumen were studied using conventional test methods and dynamic shear reometer (DSR). Blends of bitumen and polyethylene were prepared with neat bitumen (PMB) or bitumen with compatibilizer as component of the binder (PMBC) and then compared. The experimental results show that “colloid instability index”(IC) is a parameter that can be used to control the compatibility between bitumen and polyethylene. From polyethylene point of view, one of the parameters that govern is the “melt flow index” (MFI). Experimental results show that PMBC formulated with low IC bitumen and hi gh MFI lineal polyethylene can be considered as stable binder.

Ontology driven description and engineering of autonomous systems: application to process system engineering

Autonomous systems refer to systems capable of operating in a real world environment without any form of external control for extended periods of time. Autonomy is a desired goal for every system as it improves its performance, safety and profit. Ontologies are a way to conceptualize the knowledge of a specific domain. In this paper an ontology for the description of autonomous systems as well as for its development (engineering) is presented and applied to a process. This ontology is intended to be applied and used to generate final applications following a model driven methodology.

Caracterización de los parámetros de resistencia al corte y erosionabilidad del suelo para su aplicación en los problemas de estabilidad de taludes en obras lineales

La tesis se organiza en un volumen de Memoria integrada por once capítulos que constituyen el cuerpo de la tesis y otro volumen de Apéndices titulado “Caracterización geotécnica de Base de los suelos de España” que reúne en forma de cuadros las características de textura, permeabilidad, humedad-succión, erosionabilidad y resistencia al corte de los cuarenta y dos perfiles de suelos representativos de los tipos del Mapa de suelos De España. Estos cuadros han sido elaborados originalmente por la doctorando durante sus estudios para la obtención del DEA de la Suficiencia Investigadora, excepto los de resistencia al corte que lo han sido también por la doctorando de forma original, pero ya en la etapa de redacción de la tesis. En el Capítulo 1 “Introducción” se describe la motivación, antecedentes, alcance y contenido de la tesis, ordenado según el índice que en él se incluye. Los Capítulos 2 “Meteorización, 3 “Balance Hídrico” y 4 “Humedades características” constituyen el “estado del arte” en el momento actual de los temas de geotecnia ambiental relacionados con la degradación de la superficie terrestre y la estabilidad de taludes. El Capítulo 2, tras matizar algunas generalidades, aporta elementos para la cuantificación de la alteración de rocas como el “índice climático de Weinert” y de la erosión de suelos como la “ecuación universal de pérdida de suelo (U.S.L.E.)” El Capítulo 3, partiendo de los fenómenos de precipitación y evapotranspiración, plantea el balance hídrico en vertientes con instrumentos para evaluar la infiltración y la escorrentía, conceptos imprescindibles para adentrarse en los de resistencia y erosionabilidad del conjunto suelo-agua. En los Apéndices A1 y A2, se recogen valores de coeficientes de infiltración en condiciones saturadas y no saturadas de los perfiles de suelos del Mapa de España. El Capítulo 4 se dedica al estudio de este conjunto suelo-agua con la definición de conceptos que lo caracterizan, basados en la relación entre los contenidos de ambos elementos o “humedad”, sus valores máximos y mínimos y la forma en la que es retenida el agua por el suelo. Este capítulo acaba con el concepto de “Curva característica Suelo-Agua/Soil Water Characteristic curve (SWCC)”, que liga el contenido de agua de un suelo con la tensión a la que está retenida (uauw) “succión” o con su expresión más usual “pF”. En el Apéndice A 3 se adjuntan las SWCC de los perfiles de suelos del Mapa de suelos de España. En el Capítulo 5 “Resistencia al corte de los suelos”, se detalla la influencia que tienen sobre la resistencia de los suelos factores como el paso del tiempo, el contenido de humedad y la presencia y tipo de vegetación en la superficie del suelo estudiado. El Capítulo 6 “Evaluación de la erosión”, analiza el factor de erosionabilidad del suelo “factor K” de la U.S.L.E., su evaluación en función de la textura, estructura y permeabilidad del suelo, con la estimación hecha para los cuarenta y dos perfiles de suelos del Mapa de España, contenida en el Apéndice 4. En el Capítulo 7 “Metodología de diseño” se hacen en su primera parte unas consideraciones geoambientales de diseño aplicables al estudio de los problemas de inestabilidades en taludes. La segunda parte constituye el núcleo de la tesis con la propuesta de “estimación de los parámetros de resistencia al corte del suelo”, consecuente con las teorías y metodología de análisis expuesta en los capítulos anteriores. En el Apéndice A 5 se presentan los valores de los parámetros coulombianos de resistencia al corte, ”c y Ф” estimados según la caracterización climática a partir del índice de Thornthwaite, en condicionesde diseño para humedades naturales máxima y mínima de los cuarenta y dos perfiles de suelos del Mapa de suelos de España. El Capítulo 8 “Aplicación a casos reales” se considera de gran interés al constituir una auténtica continuación de la segunda parte del capítulo anterior, desarrollando la metodología expuesta en él a cuatro problemáticas de infraestructuras de obras lineales, relacionadas con problemas de erosión y deslizamientos en taludes. El Capítulo 9 “Ensayos de referencia” se incluye como punto de apoyo (referencia) a las teorías expuestas, valorando la idoneidad de los tipos de ensayos y tipos de suelos seleccionados (Laboratorio de Geotecnia del CEDEX y Laboratorio Hong-Kong University of Science and Technology), utilizados para la obtención, por correlaciones deducidas, de las curvas SWCC de los perfiles de suelos del Mapa de España, incluídas en el Apéndice A 3, como se ha citado antes. En el Capítulo 10 “Conclusiones y Futuras Líneas de Investigación”se apuntan en primer lugar unas conclusiones que, a juicio de la doctorando, se pueden extraer con interés de esta tesis y a continuación se esbozan unas posibles líneas de investigación, fundamentalmente de tipo experimental, que complementarían los avances derivados de esta tesis o podrían esclarecer y abrir nuevas interpretaciones de los fenómenos naturales de erosión y estabilidad de taludes en los que ésta se ha centrado. Finalmente, en el Capítulo 11 “Bibliografía” se han reunido 328 referencias que reflejan una visión amplia y bastante completa del tema tratado, obtenida complementando las de tesis anteriores sobre esta singular materia (“Efecto estabilizador de la vegetación en taludes”, L Fort 1975 y “Determinación de las características de fricción en el contacto suelo-geotextil a diferentes succiones, mediante equipos de laboratorio singulares”, E Asanza 2009), con propias de la doctorando (9) y las consideradas de mayor interés de los últimos Congresos sobre Suelos no saturados,”Unsat 95”, “Unsat 2002” y “Unsat 2011” entre otros. ABSTRACT The thesis is organized in a volume of Memory composed of eleven chapters that make up the body of the thesis and other Appendices volume entitled "Geotechnical characterization of basis of the soils of Spain" that combines the characteristics of texture, permeability, moisture-suction, erosionability, and shear strength of forty-two profiles of soils representative of the types of the soil of Spain map in the form of pictures. These pictures have been produced originally by the student during their studies to obtain the DEA of the research, except those of the shear strength, also been done by the PhD student in an original way, but already at the stage of drafting of the thesis. Chapter 1 "Introducción" describes the motivation, background, scope and content of the thesis, ordered according to the index that is included. The Chapters: 2 "Weathering, 3 “Water Balance” and 4 “moisture characteristics" are the "State of the art" at the present time of geotechnical environmental issues related to the degradation of the Earth's surface and the slope stability. Chapter 2 after clarify some general information, provides elements for the quantification of the alteration of rocks as "Weinert climate index" and soil erosion as the "universal equation of loss of soil (U.S.L.E.)" Chapter 3, on the basis of the phenomena of precipitation and evapotranspiration, raises the water balance in sheds with instruments to evaluate infiltration and runoff, essential concepts into the resistance and erosionability water-soil joint. Values of soils coefficients of infiltration in saturated and unsaturated conditions from the Spain map of profiles are collected in the Appendices A1 and A2. Chapter 4 is dedicated to the study of this joint “soil-water”, with the definition of concepts that characterize it, based on the relationship between the contents of both elements or “moisture”, their maximum and minimum values and the way in which water is retained by the soil. This chapter ends with the concept of “Soil Water Characteristic curve (SWCC)", which linked the water content of a soil with the stress that it is retained (ua-uw) "suction" or its expression more usual "pF". The SWCC of the profiles of soils of the Spain soils Map are attached in the Appendix 3. In Chapter 5 “Soils shear strength”,is detailed the influence that they have on the resistance of soils factors such as the passage of time, the content of moisture and the presence and type of vegetation on the surface of the studied soil. Chapter 6 "Assessment of erosion", analyses the soil erodibility factor "Kfactor" of the U.S.L.E., its evaluation based on texture, structure and permeability of the soil, with the estimate for forty-two profiles of soils on the Spain Soils Map, contained in Appendix 4. Chapter 7 "Design methodology" some considerations are made in the first part geo-environmental design applicable to the study of the problems of instabilities in slopes. The second part constitutes the core of the thesis with the proposal of “estimation of parameters of shear strength”, of the soils consistent with theories and analytical methodology outlined in the previous chapters. Appendix A 5 presents the values of the coulombians parameters of shear strength, "c and Ф" according to the characterization of climate from the index of Thornthwaite, in design for natural moisture conditions maximum and minimum of forty-two profils of Spain Soils Map Chapter 8 "Application to real cases" is considered of great interest to constitute a true continuation of the second part of the previous chapter, developing the methodology exposed it to four problems of civil-works infrastructure, related to problems of erosion and landslides in slopes. Chapter 9 "Tests of reference" is included as point of support (reference) to the theories exposed, assessing the suitability of the types of tests and types of selected soils (Geotechnical laboratory of CEDEX and laboratory Hongkong University of Science and Technology), used to obtain, by deduced correlations, of curves SWCC of soils profiles on the Spain Soils Map, included in Appendix A. 3, as it was mentioned before. Chapter 10 "Conclusions and future research lines" are running first conclusions which, in the opinion of the candidate, can be extracted with interest of this thesis, and then, it outlines some possible lines of research, mainly experimental, which would complement the advances arising from this thesis or could clarify and open new interpretations of natural phenomena of erosion and slope stability in which it has focused. Finally, in Chapter 11 "Bibliography" 328 references have been included which reflect a broad and fairly comprehensive view of the subject matter, obtained complementing those of the previous theses on this singular issue ("Vegetation stabilizing effect on slopes", L Fort 1975, and "Determination of the characteristics of friction in the contact soil-geotextile to different-suctions, through special laboratory equipment", E Asanza 2009) with some of them from of the candidate (9) and the others from of the considered as the most interesting of recent conferences on unsaturated soils, "Unsat 95", "Unsat2002" and "Unsat 2011" among others.

High Efficiency Envelope Amplifier based on a Ripple Cancellation Buck Converter. Design, Optimization and Integration in an EER RFPA

Durante los últimos años la tendencia en el sector de las telecomunicaciones ha sido un aumento y diversificación en la transmisión de voz, video y fundamentalmente de datos. Para conseguir alcanzar las tasas de transmisión requeridas, los nuevos estándares de comunicaciones requieren un mayor ancho de banda y tienen un mayor factor de pico, lo cual influye en el bajo rendimiento del amplificador de radiofrecuencia (RFPA). Otro factor que ha influido en el bajo rendimiento es el diseño del amplificador de radiofrecuencia. Tradicionalmente se han utilizado amplificadores lineales por su buen funcionamiento. Sin embargo, debido al elevado factor de pico de las señales transmitidas, el rendimiento de este tipo de amplificadores es bajo. El bajo rendimiento del sistema conlleva desventajas adicionales como el aumento del coste y del tamaño del sistema de refrigeración, como en el caso de una estación base, o como la reducción del tiempo de uso y un mayor calentamiento del equipo para sistemas portátiles alimentados con baterías. Debido a estos factores, se han desarrollado durante las últimas décadas varias soluciones para aumentar el rendimiento del RFPA como la técnica de Outphasing, combinadores de potencia o la técnica de Doherty. Estas soluciones mejoran las prestaciones del RFPA y en algún caso han sido ampliamente utilizados comercialmente como la técnica de Doherty, que alcanza rendimientos hasta del 50% para el sistema completo para anchos de banda de hasta 20MHz. Pese a las mejoras obtenidas con estas soluciones, los mayores rendimientos del sistema se obtienen para soluciones basadas en la modulación de la tensión de alimentación del amplificador de potencia como “Envelope Tracking” o “EER”. La técnica de seguimiento de envolvente o “Envelope Tracking” está basada en la modulación de la tensión de alimentación de un amplificador lineal de potencia para obtener una mejora en el rendimiento en el sistema comparado a una solución con una tensión de alimentación constante. Para la implementación de esta técnica se necesita una etapa adicional, el amplificador de envolvente, que añade complejidad al amplificador de radiofrecuencia. En un amplificador diseñado con esta técnica, se aumentan las pérdidas debido a la etapa adicional que supone el amplificador de envolvente pero a su vez disminuyen las pérdidas en el amplificador de potencia. Si el diseño se optimiza adecuadamente, puede conseguirse un aumento global en el rendimiento del sistema superior al conseguido con las técnicas mencionadas anteriormente. Esta técnica presenta ventajas en el diseño del amplificador de envolvente, ya que el ancho de banda requerido puede ser menor que el ancho de banda de la señal de envolvente si se optimiza adecuadamente el diseño. Adicionalmente, debido a que la sincronización entre la señal de envolvente y de fase no tiene que ser perfecta, el proceso de integración conlleva ciertas ventajas respecto a otras técnicas como EER. La técnica de eliminación y restauración de envolvente, llamada EER o técnica de Kahn está basada en modulación simultánea de la envolvente y la fase de la señal usando un amplificador de potencia conmutado, no lineal y que permite obtener un elevado rendimiento. Esta solución fue propuesta en el año 1952, pero no ha sido implementada con éxito durante muchos años debido a los exigentes requerimientos en cuanto a la sincronización entre fase y envolvente, a las técnicas de control y de corrección de los errores y no linealidades de cada una de las etapas así como de los equipos para poder implementar estas técnicas, que tienen unos requerimientos exigentes en capacidad de cálculo y procesamiento. Dentro del diseño de un RFPA, el amplificador de envolvente tiene una gran importancia debido a su influencia en el rendimiento y ancho de banda del sistema completo. Adicionalmente, la linealidad y la calidad de la señal de transmitida deben ser elevados para poder cumplir con los diferentes estándares de telecomunicaciones. Esta tesis se centra en el amplificador de envolvente y el objetivo principal es el desarrollo de soluciones que permitan el aumento del rendimiento total del sistema a la vez que satisfagan los requerimientos de ancho de banda, calidad de la señal transmitida y de linealidad. Debido al elevado rendimiento que potencialmente puede alcanzarse con la técnica de EER, esta técnica ha sido objeto de análisis y en el estado del arte pueden encontrarse numerosas referencias que analizan el diseño y proponen diversas implementaciones. En una clasificación de alto nivel, podemos agrupar las soluciones propuestas del amplificador de envolvente según estén compuestas de una o múltiples etapas. Las soluciones para el amplificador de envolvente en una configuración multietapa se basan en la combinación de un convertidor conmutado, de elevado rendimiento con un regulador lineal, de alto ancho de banda, en una combinación serie o paralelo. Estas soluciones, debido a la combinación de las características de ambas etapas, proporcionan un buen compromiso entre rendimiento y buen funcionamiento del amplificador de RF. Por otro lado, la complejidad del sistema aumenta debido al mayor número de componentes y de señales de control necesarias y el aumento de rendimiento que se consigue con estas soluciones es limitado. Una configuración en una etapa tiene las ventajas de una mayor simplicidad, pero debido al elevado ancho de banda necesario, la frecuencia de conmutación debe aumentarse en gran medida. Esto implicará un bajo rendimiento y un peor funcionamiento del amplificador de envolvente. En el estado del arte pueden encontrarse diversas soluciones para un amplificador de envolvente en una etapa, como aumentar la frecuencia de conmutación y realizar la implementación en un circuito integrado, que tendrá mejor funcionamiento a altas frecuencias o utilizar técnicas topológicas y/o filtros de orden elevado, que permiten una reducción de la frecuencia de conmutación. En esta tesis se propone de manera original el uso de la técnica de cancelación de rizado, aplicado al convertidor reductor síncrono, para reducir la frecuencia de conmutación comparado con diseño equivalente del convertidor reductor convencional. Adicionalmente se han desarrollado dos variantes topológicas basadas en esta solución para aumentar la robustez y las prestaciones de la misma. Otro punto de interés en el diseño de un RFPA es la dificultad de poder estimar la influencia de los parámetros de diseño del amplificador de envolvente en el amplificador final integrado. En esta tesis se ha abordado este problema y se ha desarrollado una herramienta de diseño que permite obtener las principales figuras de mérito del amplificador integrado para la técnica de EER a partir del diseño del amplificador de envolvente. Mediante el uso de esta herramienta pueden validarse el efecto del ancho de banda, el rizado de tensión de salida o las no linealidades del diseño del amplificador de envolvente para varias modulaciones digitales. Las principales contribuciones originales de esta tesis son las siguientes: La aplicación de la técnica de cancelación de rizado a un convertidor reductor síncrono para un amplificador de envolvente de alto rendimiento para un RFPA linealizado mediante la técnica de EER. Una reducción del 66% en la frecuencia de conmutación, comparado con el reductor convencional equivalente. Esta reducción se ha validado experimentalmente obteniéndose una mejora en el rendimiento de entre el 12.4% y el 16% para las especificaciones de este trabajo. La topología y el diseño del convertidor reductor con dos redes de cancelación de rizado en cascada para mejorar el funcionamiento y robustez de la solución con una red de cancelación. La combinación de un convertidor redactor multifase con la técnica de cancelación de rizado para obtener una topología que proporciona una reducción del cociente entre frecuencia de conmutación y ancho de banda de la señal. El proceso de optimización del control del amplificador de envolvente en lazo cerrado para mejorar el funcionamiento respecto a la solución en lazo abierto del convertidor reductor con red de cancelación de rizado. Una herramienta de simulación para optimizar el proceso de diseño del amplificador de envolvente mediante la estimación de las figuras de mérito del RFPA, implementado mediante EER, basada en el diseño del amplificador de envolvente. La integración y caracterización del amplificador de envolvente basado en un convertidor reductor con red de cancelación de rizado en el transmisor de radiofrecuencia completo consiguiendo un elevado rendimiento, entre 57% y 70.6% para potencias de salida de 14.4W y 40.7W respectivamente. Esta tesis se divide en seis capítulos. El primer capítulo aborda la introducción enfocada en la aplicación, los amplificadores de potencia de radiofrecuencia, así como los principales problemas, retos y soluciones existentes. En el capítulo dos se desarrolla el estado del arte de amplificadores de potencia de RF, describiéndose las principales técnicas de diseño, las causas de no linealidad y las técnicas de optimización. El capítulo tres está centrado en las soluciones propuestas para el amplificador de envolvente. El modo de control se ha abordado en este capítulo y se ha presentado una optimización del diseño en lazo cerrado para el convertidor reductor convencional y para el convertidor reductor con red de cancelación de rizado. El capítulo cuatro se centra en el proceso de diseño del amplificador de envolvente. Se ha desarrollado una herramienta de diseño para evaluar la influencia del amplificador de envolvente en las figuras de mérito del RFPA. En el capítulo cinco se presenta el proceso de integración realizado y las pruebas realizadas para las diversas modulaciones, así como la completa caracterización y análisis del amplificador de RF. El capítulo seis describe las principales conclusiones de la tesis y las líneas futuras. ABSTRACT The trend in the telecommunications sector during the last years follow a high increase in the transmission rate of voice, video and mainly in data. To achieve the required levels of data rates, the new modulation standards demand higher bandwidths and have a higher peak to average power ratio (PAPR). These specifications have a direct impact in the low efficiency of the RFPA. An additional factor for the low efficiency of the RFPA is in the power amplifier design. Traditionally, linear classes have been used for the implementation of the power amplifier as they comply with the technical requirements. However, they have a low efficiency, especially in the operating range of signals with a high PAPR. The low efficiency of the transmitter has additional disadvantages as an increase in the cost and size as the cooling system needs to be increased for a base station and a temperature increase and a lower use time for portable devices. Several solutions have been proposed in the state of the art to improve the efficiency of the transmitter as Outphasing, power combiners or Doherty technique. However, the highest potential of efficiency improvement can be obtained using a modulated power supply for the power amplifier, as in the Envelope Tracking and EER techniques. The Envelope Tracking technique is based on the modulation of the power supply of a linear power amplifier to improve the overall efficiency compared to a fixed voltage supply. In the implementation of this technique an additional stage is needed, the envelope amplifier, that will increase the complexity of the RFPA. However, the efficiency of the linear power amplifier will increase and, if designed properly, the RFPA efficiency will be improved. The advantages of this technique are that the envelope amplifier design does not require such a high bandwidth as the envelope signal and that in the integration process a perfect synchronization between envelope and phase is not required. The Envelope Elimination and Restoration (EER) technique, known also as Kahn’s technique, is based on the simultaneous modulation of envelope and phase using a high efficiency switched power amplifier. This solution has the highest potential in terms of the efficiency improvement but also has the most challenging specifications. This solution, proposed in 1952, has not been successfully implemented until the last two decades due to the high demanding requirements for each of the stages as well as for the highly demanding processing and computation capabilities needed. At the system level, a very precise synchronization is required between the envelope and phase paths to avoid a linearity decrease of the system. Several techniques are used to compensate the non-linear effects in amplitude and phase and to improve the rejection of the out of band noise as predistortion, feedback and feed-forward. In order to obtain a high bandwidth and efficient RFPA using either ET or EER, the envelope amplifier stage will have a critical importance. The requirements for this stage are very demanding in terms of bandwidth, linearity and quality of the transmitted signal. Additionally the efficiency should be as high as possible, as the envelope amplifier has a direct impact in the efficiency of the overall system. This thesis is focused on the envelope amplifier stage and the main objective will be the development of high efficiency envelope amplifier solutions that comply with the requirements of the RFPA application. The design and optimization of an envelope amplifier for a RFPA application is a highly referenced research topic, and many solutions that address the envelope amplifier and the RFPA design and optimization can be found in the state of the art. From a high level classification, multiple and single stage envelope amplifiers can be identified. Envelope amplifiers for EER based on multiple stage architecture combine a linear assisted stage and a switched-mode stage, either in a series or parallel configuration, to achieve a very high performance RFPA. However, the complexity of the system increases and the efficiency improvement is limited. A single-stage envelope amplifier has the advantage of a lower complexity but in order to achieve the required bandwidth the switching frequency has to be highly increased, and therefore the performance and the efficiency are degraded. Several techniques are used to overcome this limitation, as the design of integrated circuits that are capable of switching at very high rates or the use of topological solutions, high order filters or a combination of both to reduce the switching frequency requirements. In this thesis it is originally proposed the use of the ripple cancellation technique, applied to a synchronous buck converter, to reduce the switching frequency requirements compared to a conventional buck converter for an envelope amplifier application. Three original proposals for the envelope amplifier stage, based on the ripple cancellation technique, are presented and one of the solutions has been experimentally validated and integrated in the complete amplifier, showing a high total efficiency increase compared to other solutions of the state of the art. Additionally, the proposed envelope amplifier has been integrated in the complete RFPA achieving a high total efficiency. The design process optimization has also been analyzed in this thesis. Due to the different figures of merit between the envelope amplifier and the complete RFPA it is very difficult to obtain an optimized design for the envelope amplifier. To reduce the design uncertainties, a design tool has been developed to provide an estimation of the RFPA figures of merit based on the design of the envelope amplifier. The main contributions of this thesis are: The application of the ripple cancellation technique to a synchronous buck converter for an envelope amplifier application to achieve a high efficiency and high bandwidth EER RFPA. A 66% reduction of the switching frequency, validated experimentally, compared to the equivalent conventional buck converter. This reduction has been reflected in an improvement in the efficiency between 12.4% and 16%, validated for the specifications of this work. The synchronous buck converter with two cascaded ripple cancellation networks (RCNs) topology and design to improve the robustness and the performance of the envelope amplifier. The combination of a phase-shifted multi-phase buck converter with the ripple cancellation technique to improve the envelope amplifier switching frequency to signal bandwidth ratio. The optimization of the control loop of an envelope amplifier to improve the performance of the open loop design for the conventional and ripple cancellation buck converter. A simulation tool to optimize the envelope amplifier design process. Using the envelope amplifier design as the input data, the main figures of merit of the complete RFPA for an EER application are obtained for several digital modulations. The successful integration of the envelope amplifier based on a RCN buck converter in the complete RFPA obtaining a high efficiency integrated amplifier. The efficiency obtained is between 57% and 70.6% for an output power of 14.4W and 40.7W respectively. The main figures of merit for the different modulations have been characterized and analyzed. This thesis is organized in six chapters. In Chapter 1 is provided an introduction of the RFPA application, where the main problems, challenges and solutions are described. In Chapter 2 the technical background for radiofrequency power amplifiers (RF) is presented. The main techniques to implement an RFPA are described and analyzed. The state of the art techniques to improve performance of the RFPA are identified as well as the main sources of no-linearities for the RFPA. Chapter 3 is focused on the envelope amplifier stage. The three different solutions proposed originally in this thesis for the envelope amplifier are presented and analyzed. The control stage design is analyzed and an optimization is proposed both for the conventional and the RCN buck converter. Chapter 4 is focused in the design and optimization process of the envelope amplifier and a design tool to evaluate the envelope amplifier design impact in the RFPA is presented. Chapter 5 shows the integration process of the complete amplifier. Chapter 6 addresses the main conclusions of the thesis and the future work.

Climate Change and Restoration of Degraded Land

The United Nations Climate Change Conference, Durban 2011, delivered a breakthrough on the international community's response to climate change. In the second largest meeting of its kind, the negotiations advanced, in a balanced fashion, the implementation of the Convention and the Kyoto Protocol, the Bali Action Plan, and the Cancun Agreements. The outcomes included a decision by Parties to adopt a universal legal agreement on climate change as soon as possible, and no later than 2015. One of the decisions adopted by COP 17 and CMP 7 regard to the land use, land-use change and forestry, and invites the Intergovernmental Panel on Climate Change to review and, if necessary, update supplementary methodologies for estimating anthropogenic greenhouse gas emissions by sources and removals by sinks resulting from land use, land-use change and forestry activities under Article 3, paragraphs 3 and 4, of the Kyoto Protocol. Land degradation is a human-induced or natural process which negatively affects the productivity of land within an ecosystem. The direct causes of land degradation are geographically specific. Climate change, including changes in short-term variation, as well as long-term gradual changes in temperature and precipitation, is expected to be an additional stress on rates of land degradation. Book Topics: • Introduction to Climate Change and Land Degradation • Change Mitigation • Climate Change and Waste Land Restoration • Water Management and Planning • Erosion and Hydrological Restoration • Forest Fire Land Restoration • Polluted Soils Restoration • Combating Climate Change by Restoration of Degraded Land • Research Matters – Climate Change Governance • Advanced Statistics Climate Change and Restoration of Degraded Land is of interests to academics, engineers, consultans, designers and professionals involved in restoration of degraded lands projects.

Crop rotation and residues influence N2O emission and N efficiency rather than tillage under a rainfed Mediterranean agroecosystem

Conservation tillage and crop rotation have spread during the last decades because promotes several positive effects (increase of soil organic content, reduction of soil erosion, and enhancement of carbon sequestration) (Six et al., 2004). However, these benefits could be partly counterbalanced by negative effects on the release of nitrous oxide (N2O) (Linn and Doran, 1984). There is a lack of data on long-term tillage system study, particularly in Mediterranean agro-ecosystems. The aim of this study was to evaluate the effects of long-term (>17 year) tillage systems (no tillage (NT), minimum tillage (MT) and conventional tillage (CT)); and crop rotation (wheat (W)-vetch (V)-barley (B)) versus wheat monoculture (M) on N2O emissions. Additionally, Yield-scaled N2O emissions (YSNE) and N uptake efficiency (NUpE) were assessed for each treatment.

Global instability analysis and control of three-dimensional long open cavity flow

The three-dimensional wall-bounded open cavity may be considered as a simplified geometry found in industrial applications such as leading gear or slotted flats on the airplane. Understanding the three-dimensional complex flow structure that surrounds this particular geometry is therefore of major industrial interest. At the light of the remarkable former investigations in this kind of flows, enough evidences suggest that the lateral walls have a great influence on the flow features and hence on their instability modes. Nevertheless, even though there is a large body of literature on cavity flows, most of them are based on the assumption that the flow is two-dimensional and spanwise-periodic. The flow over realistic open cavity should be considered. This thesis presents an investigation of three-dimensional wall-bounded open cavity with geometric ratio 6:2:1. To this aim, three-dimensional Direct Numerical Simulation (DNS) and global linear instability have been performed. Linear instability analysis reveals that the onset of the first instability in this open cavity is around Recr 1080. The three-dimensional shear layer mode with a complex structure is shown to be the most unstable mode. I t is noteworthy that the flow pattern of this high-frequency shear layer mode is similar to the observed unstable oscillations in supercritical unstable case. DNS of the cavity flow carried out at different Reynolds number from steady state until a nonlinear saturated state is obtained. The comparison of time histories of kinetic energy presents a clearly dominant energetic mode which shifts between low-frequency and highfrequency oscillation. A complete flow patterns from subcritical cases to supercritical case has been put in evidence. The flow structure at the supercritical case Re=1100 resembles typical wake-shedding instability oscillations with a lateral motion existed in the subcritical cases. Also, This flow pattern is similar to the observations in experiments. In order to validate the linear instability analysis results, the topology of the composite flow fields reconstructed by linear superposition of a three-dimensional base flow and its leading three-dimensional global eigenmodes has been studied. The instantaneous wall streamlines of those composited flows display distinguish influence region of each eigenmode. Attention has been focused on the leading high-frequency shear layer mode; the composite flow fields have been fully recognized with respect to the downstream wave shedding. The three-dimensional shear layer mode is shown to give rise to a typical wake-shedding instability with a lateral motions occurring downstream which is in good agreement with the experiment results. Moreover, the spanwise-periodic, open cavity with the same length to depth ratio has been also studied. The most unstable linear mode is different from the real three-dimensional cavity flow, because of the existence of the side walls. Structure sensitivity of the unstable global mode is analyzed in the flow control context. The adjoint-based sensitivity analysis has been employed to localized the receptivity region, where the flow is more sensible to momentum forcing and mass injection. Because of the non-normality of the linearized Navier-Stokes equations, the direct and adjoint field has a large spatial separation. The strongest sensitivity region is locate in the upstream lip of the three-dimensional cavity. This numerical finding is in agreement with experimental observations. Finally, a prototype of passive flow control strategy is applied.

Induction of topoisomerase I cleavage complexes by 1-β-d-arabinofuranosylcytosine (ara-C) in vitro and in ara-C-treated cells

1-β-d-Arabinofuranosylcytosine (Ara-C) is a nucleoside analog commonly used in the treatment of leukemias. Ara-C inhibits DNA polymerases and can be incorporated into DNA. Its mechanism of cytotoxicity is not fully understood. Using oligonucleotides and purified human topoisomerase I (top1), we found a 4- to 6-fold enhancement of top1 cleavage complexes when ara-C was incorporated at the +1 position (immediately 3′) relative to a unique top1 cleavage site. This enhancement was primarily due to a reversible inhibition of top1-mediated DNA religation. Because ara-C incorporation is known to alter base stacking and sugar puckering at the misincorporation site and at the neighboring base pairs, the observed inhibition of religation at the ara-C site suggests the importance of the alignment of the 5′-hydroxyl end for religation with the phosphate group of the top1 phosphotyrosine bond. This study also demonstrates that ara-C treatment and DNA incorporation trap top1 cleavage complexes in human leukemia cells. Finally, we report that camptothecin-resistant mouse P388/CPT45 cells with no detectable top1 are crossresistant to ara-C, which suggests that top1 poisoning is a potential mechanism for ara-C cytotoxicity.