Simple green approach to reinforce natural rubber with bacterial cellulose nanofibers

Natural rubber (NR) is a renewable polymer with a wide range of applications, which is constantly tailored, further increasing its utilizations. The tensile strength is one of its most important properties susceptible of being enhanced by the simple incorporation of nanofibers. The preparation and characterization of natural-rubber based nanocomposites reinforced with bacterial cellulose (BC) and bacterial cellulose coated with polystyrene (BCPS), yielded high performance materials. The nanocomposites were prepared by a simple and green process, and characterized by tensile tests, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM), and swelling experiments. The effect of the nanofiber content on morphology, static, and dynamic mechanical properties was also investigated. The results showed an increase in the mechanical properties, such as Young's modulus and tensile strength, even with modest nanofiber loadings. © 2013 American Chemical Society.

ZnO nanostructures directly grown on paper and bacterial cellulose substrates without any surface modification layer

In this report, hierarchical ZnO nano- and microstructures were directly grown for the first time on a bacterial cellulose substrate and on two additional different papers by hydrothermal synthesis without any surface modification layer. Compactness and smoothness of the substrates are two important parameters that allow the growth of oriented structures. © 2013 The Royal Society of Chemistry.

Flexible magnetic membranes based on bacterial cellulose and its evaluation as electromagnetic interference shielding material

Flexible magnetic membranes with high proportion of magnetite were successfully prepared by previous impregnation of the never dried bacterial cellulose pellicles with ferric chloride followed by reduction with sodium bisulfite and alkaline treatment for magnetite precipitation. Membranes were characterized by Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating magnetometer, field emission scanning electron microscopy (FEG-SEM) and impedance spectroscopy. Microwave properties of these membranes were investigated in the X-band (8.2 to 12.4 GHz). FEG-SEM micrographs show an effective coverage of the BC nanofibers by Fe 3O4 nanoparticles. Membranes with up to 75% in weight of particles have been prepared after 60 min of reaction. Magnetite nanoparticles in the form of aggregates well adhered to the BC fibers were observed by SEM. The average crystal sizes of the magnetic particles were in the range of 10 ± 1 to 13 ± 1 nm (estimated by XRD). The magnetic particles in the BC pellicles presented superparamagnetic behavior with a saturation magnetization in the range of 60 emu g- 1 and coercive force around 15 Oe. These magnetic pellicles also displayed high electrical permittivity and a potential application as microwave absorber materials. © 2013 Elsevier B.V.

Análise molecular da proteína HC-Pro (Helper Component-Proteinase) e seu papel na relação patógeno-hospedeiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Detecção molecular de Streptococus agalactiae em amostras de leite bovino obtidas de tanques de expansão

Pós-graduação em Medicina Veterinária - FMVZ

Bacterial cellulose/triethanolamine based ion-conducting membranes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modular Hyperthermostable Bacterial Endo-beta-1, 4-Mannanase: Molecular Shape, Flexibility and Temperature-Dependent Conformational Changes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bacterial Pathogens Related to Chronic Suppurative Otitis Media in Individuals With Cleft Palate: Bacteriological Culture and Polymerase Chain Reaction

Objective: To characterize the microbial etiology of chronic suppurative otitis media comparing the methods of classical bacteriological culture and polymerase chain reaction.Design/Setting/Patients: Bacteriological analysis by classical culture and by molecular polymerase chain reaction of 35 effusion otitis samples from patients with cleft lip and palate attending the Hospital for Rehabilitation of Craniofacial Anomalies of the University of Sao Paulo, Bauru, Brazil.Interventions: Collection of clinical samples of otitis by effusion through the external auditory tube.Main Outcome Measure: Otolaryngologic diagnosis of chronic suppurative otitis media.Results: Positive cultures were obtained from 83% of patients. Among the 31 bacterial lineages the following were isolated. In order of decreasing frequency: Pseudomonas aeruginosa (54.9%), Staphylococcus aureus (25.9%), and Enterococcus faecalis (19.2%). No anaerobes were isolated by culture. The polymerase chain reaction was positive for one or more bacteria investigated in 97.1% of samples. Anaerobe lineages were detected by the polymerase chain reaction method, such as Fusobacterium nucleatum, Bacteroides fragilis, and Peptostreptococcus anaerobius.Conclusions: Patients with cleft lip and palate with chronic suppurative otitis media presented high frequency of bacterial infection in the middle ear. The classical bacteriological culture did not detect strict anaerobes, whose presence was identified by the polymerase chain reaction method.

New biphasic mono-component composite material obtained by partial oxypropylation of bacterial cellulose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cervicovaginal Levels of Proinflammatory Cytokines Are Increased During Chlamydial Infection in Bacterial Vaginosis But Not in Lactobacilli-Dominated Flora

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In Vitro Regulation of CCL3 and CXCL12 by Bacterial By-products Is Dependent on Site of Origin of Human Oral Fibroblasts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biomechanical Loading Modulates Proinflammatory and Bone Resorptive Mediators in Bacterial-Stimulated PDL Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bacterial leaf glands in Styrax camporum (Styracaceae): first report for the family

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bacterial Cellulose/Chondroitin Sulfate for Dental Materials Scaffolds

Bacterial cellulose (BC) has become established as a remarkably versatile biomaterial and can be used in a wide variety of scientific applications, especially for medical devices. In this work, the bacterial cellulose fermentation process is modified by the addition of chondroitin sulfate (1% w/w) to the culture medium before the bacteria are inoculated. Besides, biomimetic precipitation of calcium phosphate of biological interest from simulated body fluid on bacterial cellulose was studied. Chondroitin sulfate influences in bacterial cellulose were analyzed using transmission infrared spectroscopy (FTIR), XRD (X-ray diffraction) and scanning electron microscopy (SEM). FTIR analysis showed interaction between chondroitin sulfate, bacterial cellulose and calcium phosphate and XRD demonstrated amorphous calcium phosphate and carbonated apatite on bacterial cellulose nanocomposites. SEM images confirmed incorporation of calcium phosphate in bacterial celluloe nanocomposite surface and uniform spherical calcium phosphate particles. Future experiments with cells adhesion and viability are in course.

High Dispersivity Bacterial Cellulose/Carbon Nanotube Nanocomposite for Sensor Applications

Bacterial cellulose (BC) has established to be a remarkably versatile biomaterial and can be used in wide variety of applied scientific endeavors, especially for medical devices. In fact, biomedical devices recently have gained a significant amount of attention because of increased interesting tissue-engineered products for both wound care and the regeneration of damaged or diseased organs. The architecture of BC materials can be engineered over length scales ranging from nano to macro by controlling the biofabrication process, besides, surface modifications bring a vital role in in vivo performance of biomaterials. In this work, bacterial cellulose fermentation was modified with carbon nanotubes for sensor applications and diseases diagnostic. SEM images showed that polymer modified-carbon nanotube (PVOH-carbon nanotube) produced well dispersed system and without agglomeration. Influences of carbon nanotube in bacterial cellulose were analyzed by FTIR. TGA showed higher thermal properties of developed bionanocomposites.