The relation between decentralised structure, budgetary participation and organisational commitment : the moderating role of managers' value orientation towards innovation

Reports the results of a study which investigated the moderating role of managers’ value orientation towards innovation (VOI) on the relationships between managers’ organisational commitment and two management control features – decentralised organisational structure and budgetary participation. Data for the study were collected from 116 managers in manufacturing firms. The results indicate that managers’ VOI has a significant moderating effect on the relationships between the two management control features and managers’ organisational commitment. The results reveal that the relationships are stronger for managers with high VOI than for managers with low VOI. These results have implications for enhancing managers’ organisational commitment through the design of management control systems appropriate for the extent of innovative work values promoted by organisations.

Variations in vascular access flows in haemodialysis can depend on needle orientation

Introduction: While using the Transonic Qc[TM] machine to assess access flow in arteriovenous fistulae (AVF), we observed that when compared to antegrade arterial needle insertion, retrograde arterial needle insertion could regularly produce lower access flow measurements. This study sought to explore this phenomenon.

Method: 23 patients entered and 20 finished the study. Patient selection criteria included: functioning AVF and an adequate AVF length for either retrograde or antegrade arterial needle insertion. After ensuring stable and similar blood pressures, 3 flow measurements were taken during the first 2 hours on the same dialysis day of 3 consecutive weeks using antegrade needle insertion then were repeated on 3 further consecutive weeks using retrograde insertion.

Results: Overall, access flows measured with retrograde insertion were significantly lower by a mean difference of 107.15 ml/min (57-484 ml/min) than the flows measured with antegrade needle placement. In 5/20, 3 recorded minimal difference and 2 had a higher access flows during retrograde insertion. No recirculation was observed during either antegrade or retrograde needle insertion. The paired t-test showed that there was significant difference between the antegrade versus retrograde mean measurements (p = 0.005).

Conclusion: Although the sample size is small and the number of measurements limited, we conclude that access flows may be greater with an antegrade arterial orientation compared to flows recorded with a retrograde orientation. The phenomenon behind this conclusion is yet to be investigated. We suggest that when using the Transonic Qc[TM] access measurement device the arterial needle should always be in the same direction for each measurement for each individual patient.

An analysis of microband orientation in hot deformed aluminium alloy AA5052 using forward and reverse torsion

The effects of strain path reversal on the macroscopic orientation of microbands in AA5052 have been studied using high resolution electron backscatter diffraction. Deformation was carried using two equal steps of forward/forward or forward/reverse torsion at a temperature of 300°C and strain rate of 1s-1 to a total equivalent tensile strain of 0.5. In both cases microbands were found in the majority of grains examined with many having more than one set. The microbands appear to cluster at specific angles to the macroscopic deformation. For the forward/forward condition microbands clustered around -20° and +45° to the maximum principle stress direction and at ± 30-35° to the principal strain direction. For the forward/reverse condition significantly more spread in microband angle was observed though peaks were visible at ±35° with respect to principal stress direction and at -40° and +30° with respect to the principal strain direction of the reverse torsion. This suggests the microbands formed in the forward deformation have or are dissolving and any new microbands formed are related to the deformation conditions of the final strain path.

EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation

The aim of the present investigation was to determine the orientation dependence of substructure characteristics in an austenitic Fe−30wt%Ni model alloy subjected to hot plane strain compression. Deformation was carried out at a temperature of 950 °C using a strain rate of 10 s^₋₁ to equivalent strain levels of approximately 0.2, 0.4, 0.6 and 0.8. The specimens obtained were analysed using a fully automatic electron backscatter diffraction technique. The crystallographic texture was characterized for all the strain levels studied and the subgrain structure was quantified in detail at a strain of 0.4. The substructure characteristics displayed pronounced orientation dependence. The major texture components, namely the copper, S, brass, Goss and rotated Goss, generally contained one or two prominent families of parallel larger-angle extended subboundaries, the traces of which on the longitudinal viewing plane appeared systematically aligned along the {111} slip plane traces, bounding long microbands subdivided into slightly elongated subgrains by short lower-angle transverse subboundaries. Relatively rare cube-orientated grains displayed pronounced subdivision into coarse deformation bands containing large, low-misorientated subgrains. The misorientation vectors across subboundaries largely showed a tendency to cluster around the sample transverse direction. Apart from the rotated Goss texture component, the stored energy levels for the remaining components were principally consistent with the corresponding Taylor factor values.

Effect of orientation stability on recrystallization textures of deformed aluminium single crystals

High purity Al single crystals of the Cube (0 0 1)[1 0 0] and rotated Cube (0 1 1)[0 1 ¯ 1] orientations have been deformed in plane strain compression in a channel die. Deformation was carried out at temperatures between 25 and 600 8C up to strains of 1.2. The as-deformed microstructure has been characterised using electron microscopy and electron backscattered diffraction (EBSD).
Annealing was carried out for various times and temperatures. The recrystallized microstructure has been studied using electron microscopy, and the orientation of recrystallized grains determined using EBSD. After cold deformation and annealing both orientations exhibited a random recrystallization texture component. After hot deformation both orientations retained a similar annealing texture to their starting deformation texture. The annealing texture of deformed single crystals was found to be more sensitive to the temperature of deformation than the stability of the orientation.

Orientation-specific attentional set effects

The thesis is a theoretical and experimental exploration of visual attention: when and how does knowing a feature of something we are about to see help us to see that thing? Attentional benefits occurred under short inspection times with high distraction intensity, and long inspection times with low distraction intensity.

Influences on organisational performance : marketing research, market environment and orientation

Findings demonstrated a strong association between market orientation and organisational performance. However, other associations were marginal with no direct relationship between marketing research utilisation and organisational performance, although this was positively mediated by market orientation. The implications being, organisations need to be market oriented and utilise research information to remain competitive.

Firm survival through a crisis : the influence of market orientation, marketing innovation and business strategy

As an outcome of the economic crisis, the global manufacturing sector is collapsing. Focusing on Chinese manufacturing small and medium enterprises (SMEs), this study investigates whether marketing innovation, defined as improvements in the marketing mix, can assist in withstanding the challenges of operating under the current economic conditions. A conceptual model linking market orientation, marketing innovation, competitive advantage and firm survival is tested using structural equation modelling. Three key findings are derived. First, the examined Chinese manufacturing SMEs had a greater perceived likelihood of survival had they developed and sustained a competitive advantage. Second, marketing innovation assisted in developing and sustaining competitive advantages based on differentiation and cost leadership strategies. Third, marketing innovation capabilities improved when the examined manufacturing SMEs were competitor oriented and had good inter-functional capabilities.

Robust ODF smoothing for accurate estimation of fiber orientation

Q-ball imaging was presented as a model free, linear and multimodal diffusion sensitive approach to reconstruct diffusion orientation distribution function (ODF) using diffusion weighted MRI data. The ODFs are widely used to estimate the fiber orientations. However, the smoothness constraint was proposed to achieve a balance between the angular resolution and noise stability for ODF constructs. Different regularization methods were proposed for this purpose. However, these methods are not robust and quite sensitive to the global regularization parameter. Although, numerical methods such as L-curve test are used to define a globally appropriate regularization parameter, it cannot serve as a universal value suitable for all regions of interest. This may result in over smoothing and potentially end up in neglecting an existing fiber population. In this paper, we propose to include an interpolation step prior to the spherical harmonic decomposition. This interpolation based approach is based on Delaunay triangulation provides a reliable, robust and accurate smoothing approach. This method is easy to implement and does not require other numerical methods to define the required parameters. Also, the fiber orientations estimated using this approach are more accurate compared to other common approaches.

Marketing planning : operationalising the market orientation strategy

Despite strong empirical validation of the relationship between market orientation and business performance, the literature is inconclusive on the implementation of the strategy. This paper reviews the implementation of market orientation, and investigates the associations between market orientation and marketing planning and their associations with business performance. A survey of 216 Australian larger business organisations was conducted to find evidence of these relationships. The results highlight a close association between market orientation and marketing planning, with virtually the same level of association between them, and the business performance measures used. This evidence suggests that they arguably represent the same domain. The results suggest that marketing practitioners may use the marketing planning technique as an intangible productive resource to operationalise the market orientation strategy, and use it to design a specific style and magnitude of market orientation suitable for an organisation.

Self-concept clarity and women's sexual well-being

The purpose of this study was to examine the role of self-concept clarity, a core structural aspect of self-concept, in women's sexual well-being. A convenience sample of 261 women aged 18 years and over {M=25.8, £D=7.9) completed an online survey that measured self-concept clarity, three aspects of sexual well-being (sexual self-efñcacy, sexual self-esteem and sexual satisfaction), and four structural dimensions of sexual identity (commitment, synthesis/integration, exploration, and orientation identity uncertainty). A series of multiple mediation analyses, followed by post-hoc bootstrap tests of the difference between mediation effects, revealed that self-concept clarity is indirectly related to the measures of sexual well-being, and that these relationships are mediated by the two "investment-related" dimensions of sexual identity: commitment and synthesis/integration. These results suggest that women with a more broadly and coherently integrated sexual identity are also better able to make healthy and positive choices in the sexual domain and experience more satisfaction with their sex lives, i^ore generally, the results highlight the potential importance of including structural aspects of self-concept in explanations of women's sexual well-being.