896 resultados para Android,Peer to Peer,Wifi,Mesh Network
Resumo:
Social behavior is mainly based on swarm colonies, in which each individual shares its knowledge about the environment with other individuals to get optimal solutions. Such co-operative model differs from competitive models in the way that individuals die and are born by combining information of alive ones. This paper presents the particle swarm optimization with differential evolution algorithm in order to train a neural network instead the classic back propagation algorithm. The performance of a neural network for particular problems is critically dependant on the choice of the processing elements, the net architecture and the learning algorithm. This work is focused in the development of methods for the evolutionary design of artificial neural networks. This paper focuses in optimizing the topology and structure of connectivity for these networks
Resumo:
La creación de infraestructuras comunes de telecomunicación (ICT) se hace necesaria debido al auge del servicio de televisión a mediados del siglo XX. Los elementos que las conforman pueden alterar los parámetros de calidad de la señal de televisión, actualmente transmitida bajo la norma DVB-T por las redes SMATV. El diseño de este tipo de redes se hace atendiendo a las atenuaciones de los dispositivos fijadas por el fabricante pero sin tener en cuenta la influencia de estos frente a parámetros de calidad de la señal. Se busca poder estudiar y analizar la influencia que tienen sobre el deterioro de la calidad de la señal a un nivel más detallado a fin de establecer los requerimientos mínimos que debieran de ofrecer. Para ello, en primer lugar, se hace un análisis de la respuesta individual de los dispositivos y su comparación con los datos del fabricante. A continuación estudiamos de forma detallada la respuesta que muestran en cascada y la elaboración de estructuras simples de ICT a modo de ejemplo en AWR. Una vez realizada esta primera fase se crea una red ICT real en el software utilizado en la que se analiza profundamente su repuesta en frecuencia. Por último se procede a simular dicha red ICT en AWR en la parte de VSS, donde se obtendrán las medidas de calidad en cuanto BER, EVM, espectro y demás parámetros, pudiendo concluir con una comparativa sobre el grado de fiabilidad del cálculo aproximado en el que se basa la realización del diseño de redes ICT. ABSTRACT. Creation of common telecommunications infrastructure (ICT) is necessary due to the rise of television service in the mid-twentieth century. The elements inside ICT can disturb quality parameters of television signal which is currently transmitted in the DVB-T standard by SMATV networks. Design of this type of network is made up according device attenuation defined by the manufacturer but without taking into account the influence of these parameters in signal quality. It seeks to study and analyze the influence of deterioration of signal quality deeper in order to establish the minimum requirements that should provide them. First of all, we made an analysis of individual device response and their comparison with manufacturer's data. Therefore we study in detail the response of these elements in a cascade and we develop simple structures of ICT as examples. Once the first step is done, we implement a real ICT network in the software in order to deeply analyze its frequency response. Finally we proceed to simulate this ICT network in AWR inside VSS module, where quality measures as BER, EVM, spectrum and other parameters will be obtained, concluding with a comparison of the reliability of ICT networks design estimation.
Resumo:
El incremento de la población con acceso a la televisión a mediados del siglo XX hizo necesaria la implantación de una normativa que regulara el acceso a este servicio a través de las infraestructuras comunes de telecomunicación. Estas infraestructuras están formadas por diversos elementos que pueden alterar los parámetros de calidad de la señal de televisión radiodifundida, actualmente bajo norma DVB-T. Normalmente, los diseños de las redes se hacen atendiendo a las atenuaciones que presentan los dispositivos pero sin tener en cuenta la influencia de los mismos sobre los parámetros de calidad de la señal. Por ello, es necesario conocer esta influencia para que, a la hora de diseñar una red, se cumplan no solo los requisitos de nivel de señal en las tomas de usuario sino que también se han de cumplir los requisitos de calidad (MER, relación portadora a ruido, CBER). Para llevar a cabo este estudio, en primer lugar es necesario conocer los equipos de generación y medida de señales DVB-T. El conocimiento de las características de estos equipos, las funciones que pueden realizar y sus limitaciones ayudan a llevar a cabo un buen estudio de los parámetros de calidad de la señal. Posteriormente, se realiza un estudio individual de los elementos utilizados para la construcción de una red de distribución de señal de televisión digital terrestre con el objetivo de comprobar su comportamiento en frecuencia, ya que según los fabricantes su respuesta en frecuencia es plana, y su influencia sobre la calidad de la señal. Además, se utilizarán elementos de distintas características para conocer la influencia de dichas características sobre los parámetros de calidad. Una vez llevado a cabo este estudio individual, se construye una infraestructura común de telecomunicaciones para realizar las medidas necesarias en las tomas de usuario y en puntos intermedios para así conocer cómo empeora la calidad de la señal a lo largo de este tipo de redes. ABSTRACT. The increase in population with access to television services in the middle of the 20th century, made it necessary to set a new rule to regulate this service access through the common telecommunications infrastructures. These infrastructures are composed by different elements which can alter the parameters of quality of the broadcasted television signal, nowadays under DVB-T standard. Networks design are usually made taking into account the loss of each device but without taking into account the influence on the quality parameters of the signal. Because of that, it is necessary to know this influence in order to meet not only the level requirements but also the quality requirements (MER, carrier-to-noise relation, CBER). To carry out this study, it is first necessary to understand the generation and measurement DVB-T signal equipment. The knowledge of the characteristics of these devices, their functions and limitations help to carry out a good study of the signal quality parameters. Subsequently, an individual examination of the elements used to build a distribution network of digital terrestrial television is performed in order to check its frequency dependence, since according to manufacturers’ datasheets the frequency is flat, and its influence on the signal quality parameters. In addition, elements of different characteristics are used to determine the influence of these characteristics on the quality parameters. Once done this single study, a common telecommunications infrastructure is built to perform the necessary measurements at the user points and at intermediate points in order to know how the quality of the signal over this kind of networks.
Resumo:
El presente trabajo tiene como objetivo general el análisis de las técnicas de diseño y optimización de redes topográficas, observadas mediante topografía convencional (no satelital) el desarrollo e implementación de un sistema informático capaz de ayudar a la definición de la geometría más fiable y precisa, en función de la orografía del terreno donde se tenga que ubicar. En primer lugar se realizará un estudio de la metodología del ajuste mediante mínimos cuadrados y la propagación de varianzas, para posteriormente analizar su dependencia de la geometría que adopte la red. Será imprescindible determinar la independencia de la matriz de redundancia (R) de las observaciones y su total dependencia de la geometría, así como la influencia de su diagonal principal (rii), números de redundancia, para garantizar la máxima fiabilidad interna de la misma. También se analizará el comportamiento de los números de redundancia (rii) en el diseño de una red topográfica, la variación de dichos valores en función de la geometría, analizando su independencia respecto de las observaciones así como los diferentes niveles de diseño en función de los parámetros y datos conocidos. Ha de señalarse que la optimización de la red, con arreglo a los criterios expuestos, está sujeta a los condicionantes que impone la necesidad de que los vértices sean accesibles, y además sean visibles entre sí, aquellos relacionados por observaciones, situaciones que dependen esencialmente del relieve del terreno y de los obstáculos naturales o artificiales que puedan existir. Esto implica la necesidad de incluir en el análisis y en el diseño, cuando menos de un modelo digital del terreno (MDT), aunque lo más útil sería la inclusión en el estudio del modelo digital de superficie (MDS), pero esta opción no siempre será posible. Aunque el tratamiento del diseño esté basado en un sistema bidimensional se estudiará la posibilidad de incorporar un modelo digital de superficie (MDS); esto permitirá a la hora de diseñar el emplazamiento de los vértices de la red la viabilidad de las observaciones en función de la orografía y los elementos, tanto naturales como artificiales, que sobre ella estén ubicados. Este sistema proporcionaría, en un principio, un diseño óptimo de una red constreñida, atendiendo a la fiabilidad interna y a la precisión final de sus vértices, teniendo en cuenta la orografía, lo que equivaldría a resolver un planteamiento de diseño en dos dimensiones y media1; siempre y cuando se dispusiera de un modelo digital de superficie o del terreno. Dado que la disponibilidad de obtener de manera libre el MDS de las zonas de interés del proyecto, hoy en día es costoso2, se planteará la posibilidad de conjuntar, para el estudio del diseño de la red, de un modelo digital del terreno. Las actividades a desarrollar en el trabajo de esta tesis se describen en esta memoria y se enmarcan dentro de la investigación para la que se plantean los siguientes objetivos globales: 1. Establecer un modelo matemático del proceso de observación de una red topográfica, atendiendo a todos los factores que intervienen en el mismo y a su influencia sobre las estimaciones de las incógnitas que se obtienen como resultado del ajuste de las observaciones. 2. Desarrollar un sistema que permita optimizar una red topográfica en sus resultados, aplicando técnicas de diseño y simulación sobre el modelo anterior. 3. Presentar una formulación explícita y rigurosa de los parámetros que valoran la fiabilidad de una red topográfica y de sus relaciones con el diseño de la misma. El logro de este objetivo se basa, además de en la búsqueda y revisión de las fuentes, en una intensa labor de unificación de notaciones y de construcción de pasos intermedios en los desarrollos matemáticos. 4. Elaborar una visión conjunta de la influencia del diseño de una red, en los seis siguientes factores (precisiones a posteriori, fiabilidad de las observaciones, naturaleza y viabilidad de las mismas, instrumental y metodología de estacionamiento) como criterios de optimización, con la finalidad de enmarcar el tema concreto que aquí se aborda. 5. Elaborar y programar los algoritmos necesarios para poder desarrollar una aplicación que sea capaz de contemplar las variables planteadas en el apartado anterior en el problema del diseño y simulación de redes topográficas, contemplando el modelo digital de superficie. Podrían considerarse como objetivos secundarios, los siguientes apartados: Desarrollar los algoritmos necesarios para interrelacionar el modelo digital del terreno con los propios del diseño. Implementar en la aplicación informática la posibilidad de variación, por parte del usuario, de los criterios de cobertura de los parámetros (distribución normal o t de Student), así como los grados de fiabilidad de los mismos ABSTRACT The overall purpose of this work is the analysis of the techniques of design and optimization for geodetic networks, measured with conventional survey methods (not satellite), the development and implementation of a computational system capable to help on the definition of the most liable and accurate geometry, depending on the land orography where the network has to be located. First of all, a study of the methodology by least squares adjustment and propagation of variances will be held; then, subsequently, analyze its dependency of the geometry that the network will take. It will be essential to determine the independency of redundancy matrix (R) from the observations and its absolute dependency from the network geometry, as well as the influence of the diagonal terms of the R matrix (rii), redundancy numbers, in order to ensure maximum re liability of the network. It will also be analyzed first the behavior of redundancy numbers (rii) in surveying network design, then the variation of these values depending on the geometry with the analysis of its independency from the observations, and finally the different design levels depending on parameters and known data. It should be stated that network optimization, according to exposed criteria, is subject to the accessibility of the network points. In addition, common visibility among network points, which of them are connected with observations, has to be considered. All these situations depends essentially on the terrain relief and the natural or artificial obstacles that should exist. Therefore, it is necessary to include, at least, a digital terrain model (DTM), and better a digital surface model (DSM), not always available. Although design treatment is based on a bidimensional system, the possibility of incorporating a digital surface model (DSM) will be studied; this will allow evaluating the observations feasibility based on the terrain and the elements, both natural and artificial, which are located on it, when selecting network point locations. This system would provide, at first, an optimal design of a constrained network, considering both the internal reliability and the accuracy of its points (including the relief). This approach would amount to solving a “two and a half dimensional”3 design, if a digital surface model is available. As the availability of free DSM4 of the areas of interest of the project today is expensive, the possibility of combining a digital terrain model will arise. The activities to be developed on this PhD thesis are described in this document and are part of the research for which the following overall objectives are posed: 1. To establish a mathematical model for the process of observation of a survey network, considering all the factors involved and its influence on the estimates of the unknowns that are obtained as a result of the observations adjustment. 2. To develop a system to optimize a survey network results, applying design and simulation techniques on the previous model. 3. To present an explicit and rigorous formulation of parameters which assess the reliability of a survey network and its relations with the design. The achievement of this objective is based, besides on the search and review of sources, in an intense work of unification of notation and construction of intermediate steps in the mathematical developments. 4. To develop an overview of the influence on the network design of six major factors (posterior accuracy, observations reliability, viability of observations, instruments and station methodology) as optimization criteria, in order to define the subject approached on this document. 5. To elaborate and program the algorithms needed to develop an application software capable of considering the variables proposed in the previous section, on the problem of design and simulation of surveying networks, considering the digital surface model. It could be considered as secondary objectives, the following paragraphs: To develop the necessary algorithms to interrelate the digital terrain model with the design ones. To implement in the software application the possibility of variation of the coverage criteria parameters (normal distribution or Student t test) and therefore its degree of reliability.
Resumo:
En la presente tesis desarrollamos una estrategia para la simulación numérica del comportamiento mecánico de la aorta humana usando modelos de elementos finitos no lineales. Prestamos especial atención a tres aspectos claves relacionados con la biomecánica de los tejidos blandos. Primero, el análisis del comportamiento anisótropo característico de los tejidos blandos debido a las familias de fibras de colágeno. Segundo, el análisis del ablandamiento presentado por los vasos sanguíneos cuando estos soportan cargas fuera del rango de funcionamiento fisiológico. Y finalmente, la inclusión de las tensiones residuales en las simulaciones en concordancia con el experimento de apertura de ángulo. El análisis del daño se aborda mediante dos aproximaciones diferentes. En la primera aproximación se presenta una formulación de daño local con regularización. Esta formulación tiene dos ingredientes principales. Por una parte, usa los principios de la teoría de la fisura difusa para garantizar la objetividad de los resultados con diferentes mallas. Por otra parte, usa el modelo bidimensional de Hodge-Petruska para describir el comportamiento mesoscópico de los fibriles. Partiendo de este modelo mesoscópico, las propiedades macroscópicas de las fibras de colágeno son obtenidas a través de un proceso de homogenización. En la segunda aproximación se presenta un modelo de daño no-local enriquecido con el gradiente de la variable de daño. El modelo se construye a partir del enriquecimiento de la función de energía con un término que contiene el gradiente material de la variable de daño no-local. La inclusión de este término asegura una regularización implícita de la implementación por elementos finitos, dando lugar a resultados de las simulaciones que no dependen de la malla. La aplicabilidad de este último modelo a problemas de biomecánica se estudia por medio de una simulación de un procedimiento quirúrgico típico conocido como angioplastia de balón. In the present thesis we develop a framework for the numerical simulation of the mechanical behaviour of the human aorta using non-linear finite element models. Special attention is paid to three key aspects related to the biomechanics of soft tissues. First, the modelling of the characteristic anisotropic behaviour of the softue due to the collagen fibre families. Secondly, the modelling of damage-related softening that blood vessels exhibit when subjected to loads beyond their physiological range. And finally, the inclusion of the residual stresses in the simulations in accordance with the opening-angle experiment The modelling of damage is addressed with two major and different approaches. In the first approach a continuum local damage formulation with regularisation is presented. This formulation has two principal ingredients. On the one hand, it makes use of the principles of the smeared crack theory to avoid the mesh size dependence of the structural response in softening. On the other hand, it uses a Hodge-Petruska bidimensional model to describe the fibrils as staggered arrays of tropocollagen molecules, and from this mesoscopic model the macroscopic material properties of the collagen fibres are obtained using an homogenisation process. In the second approach a non-local gradient-enhanced damage formulation is introduced. The model is built around the enhancement of the free energy function by means of a term that contains the referential gradient of the non-local damage variable. The inclusion of this term ensures an implicit regularisation of the finite element implementation, yielding mesh-objective results of the simulations. The applicability of the later model to biomechanically-related problems is studied by means of the simulation of a typical surgical procedure, namely, the balloon angioplasty.
Resumo:
En la actualidad, cualquier compañía de telecomunicaciones que posea su propia red debe afrontar el problema del mantenimiento de la misma. Ofrecer un mínimo de calidad de servicio a sus clientes debe ser uno de sus objetivos principales. Esta calidad debe mantenerse aunque ocurran incidencias en la red. El presente trabajo pretende resolver el problema de priorizar el orden en que se restauran los cables, caminos y circuitos, dañados por una incidencia, dentro de una red troncal de transporte perteneciente a una operadora de telecomunicaciones. Tras un planteamiento detallado del problema y de todos los factores que influirán en la toma de decisión, en primer lugar se acomete una solución basada en Métodos Multicriterio Discretos, concretamente con el uso de ELECTRE I y AHP. A continuación se realiza una propuesta de solución basada en Redes Neuronales (con dos aproximaciones diferentes al problema). Por último se utiliza un método basado en la Optimización por Enjambre de Partículas (PSO), adaptado a un problema de permutación de enteros (ordenación), y con una forma particular de evaluar la mejor posición global del enjambre. Complementariamente se realiza una exposición de lo que es una empresa Operadora de telecomunicaciones, de sus departamentos y procesos internos, de los servicios que ofrece, de las redes sobre las que se soportan, y de los puntos clave a tener en cuenta en la implementación de sus sistemas informáticos de gestión integral. ABSTRACT: Nowadays, any telecommunications company that owns its own network must face the problem of maintaining it (service assurance). Provide a minimum quality of service to its customers must be one of its main objectives. This quality should be maintained although any incidents happen to occur in the network. This thesis aims to solve the problem of prioritizing the order in which the damaged cables, trails, path and circuits, within a backbone transport network, should be restored. This work begins with a detailed explanation about network maintenance issues and all the factors that influence decision-making problem. First of all, one solution based on Discrete Multicriteria methods is tried (ELECTRE I and AHP algorithms are used). Also, a solution based on neural networks (with two different approaches to the problem) is analyzed. Finally, this thesis proposes an algorithm based on Particle Swarm Optimization (PSO), adapted to a problem of integers permutation, and a particular way of evaluating the best overall position of the swarm method. In addition, there is included an exhibition about telecommunications companies, its departments, internal processes, services offered to clients, physical networks, and key points to consider when implementing its integrated management systems.
Resumo:
Para empezar, se ha hecho un análisis de las diferentes posibilidades que se podían implementar para poder conseguir el objetivo del trabajo. El resultado final debe ser, disponer de máquinas para que el sistema operativo fuese independiente del hardware que se tiene instalado en él . Para ello, se decide montar un sistema operativo de base en todos los equipos del laboratorio, que tenga las necesidades mínimas que se necesitan, las cuales son una interfaz gráfica y conexión de red. Hay que intentar reducir el consumo de recursos al máximo con este sistema operativo mínimo para que el rendimiento de las máquinas sea lo más fluido posible para los usuarios. El sistema elegido fue Linux con su distribución Ubuntu [ubu, http] con los módulos mínimos que permita funcionar el software necesario. Una vez se instala el sistema operativo anfitrión, se instala el escritorio Xfce [ubu2, http], que es el más ligero de Ubuntu, pero que proporciona buen rendimiento. Después, se procedió a instalar un software de virtualización en cada equipo. En este caso se decidió, por las buenas prestaciones que ofrecía, que fuera VirtualBox [vir2,http] de Oracle. Sobre éste software se crean tantas máquinas virtuales (con sistema operativo Windows) como asignaturas diferentes se cursan en el laboratorio donde se trabaje. Con esto, se consigue que al arrancar el programa los alumnos pudieran escoger qué máquina arrancar y lo que es más importante, se permite realizar cualquier cambio en el hardware (exceptuando el disco duro porque borraría todo lo que se tuviera guardado). Además de no tener que volver a reinstalar el sistema operativo nuevamente, se consigue la abstracción del software y hardware. También se decide que, para tener un respaldo de las máquinas virtuales que se tengan creadas en VirtualBox, se utiliza un servidor NAS. Uno de los motivos de utilizar dicho servidor fue por aprovechar una infraestructura ya creada. Un servidor NAS da la posibilidad de recuperar cualquier archivo (máquina virtual) cuando haga falta porque haya alguna máquina virtual corrupta en algún equipo, o en varios. Este tipo de servidor tiene la gran ventaja de ser multicast, es decir, permite solicitudes simultáneas. ABSTRACT For starters, there has been an analysis of the different possibilities that could be implemented to achieve the objective of the work. This objective was to have machines for the operating system to be independent of the hardware we have installed on it. Therefore, we decided to create an operating system based on all computers in the laboratory, taking the minimum needs we need. This is a graphical interface and network connection. We must try to reduce the consumption of resources to the maximum for the performance of the machines is as fluid as possible for users. The system was chosen with its Ubuntu Linux distribution with minimum modules that allow us to run software that is necessary for us. Once the base is installed, we install the Xfce desktop, which is the lightest of Ubuntu, but which provided good performance. Then we proceeded to install a virtualization software on each computer. In this case we decided, for good performance that gave us, it was Oracle VirtualBox. About this software create many virtual machines (Windows operating system) as different subjects are studied in the laboratory where we are. With that, we got it at program startup students could choose which machine start and what is more important, allowed us to make any changes to the hardware (except the hard drive because it would erase all we have). Besides not having to reinstall the operating system again, we get the software and hardware abstraction. We also decided that in order to have a backup of our virtual machines that we created in VirtualBox, we use a NAS server. One reason to use that server was to leverage their existing network infrastructure. A NAS server gives us the ability to retrieve any file (image) when we do need because there is some corrupt virtual machine in a team, or several. This is possible because this type of server allows multicast connection.
Resumo:
Este proyecto muestra una solución de red para una empresa que presta servicios de Contact Center desde distintas sedes distribuidas geográficamente, utilizando la tecnología de telefonía sobre IP. El objetivo de este proyecto es el de convertirse en una guía de diseño para el despliegue de soluciones de red utilizando los actuales equipos de comunicaciones desarrollados por el fabricante Cisco Systems, Inc., los equipos de seguridad desarrollados por el fabricante Fortinet y los sistemas de telefonía desarrollados por Avaya Inc. y Oracle Corporation, debido a su gran penetración en el mercado y a las aportaciones que cada uno ha realizado en el sector de Contact Center. Para poder proveer interconexión entre las sedes de un Contact Center se procede a la contratación de un acceso a la red MPLS perteneciente a un operador de telecomunicaciones, quien provee conectividad entre las sedes utilizando la tecnología VPN MPLS con dos accesos diversificados entre sí desde cada una de las sedes del Contact Center. El resultado de esta contratación es el aprovechamiento de las ventajas que un operador de telecomunicaciones puede ofrecer a sus clientes, en relación a calidad de servicio, disponibilidad y expansión geográfica. De la misma manera, se definen una serie de criterios o niveles de servicio que aseguran a un Contact Center una comunicación de calidad entre sus sedes, entendiéndose por comunicación de calidad aquella que sea capaz de transmitirse con unos valores mínimos de pérdida de paquetes así como retraso en la transmisión, y una velocidad acorde a la demanda de los servicios de voz y datos. Como parte de la solución, se diseña una conexión redundante a Internet que proporciona acceso a todas las sedes del Contact Center. La solución de conectividad local en cada una de las sedes de un Contact Center se ha diseñado de manera general acorde al volumen de puestos de usuarios y escalabilidad que pueda tener cada una de las sedes. De esta manera se muestran varias opciones asociadas al equipamiento actual que ofrece el fabricante Cisco Systems, Inc.. Como parte de la solución se han definido los criterios de calidad para la elección de los Centros de Datos (Data Center). Un Contact Center tiene conexiones hacia o desde las empresas cliente a las que da servicio y provee de acceso a la red a sus tele-trabajadores. Este requerimiento junto con el acceso y servicios publicados en Internet necesita una infraestructura de seguridad. Este hecho da lugar al diseño de una solución que unifica todas las conexiones bajo una única infraestructura, dividiendo de manera lógica o virtual cada uno de los servicios. De la misma manera, se ha definido la utilización de protocolos como 802.1X para evitar accesos no autorizados a la red del Contact Center. La solución de voz elegida es heterogénea y capaz de soportar los protocolos de señalización más conocidos (SIP y H.323). De esta manera se busca tener la máxima flexibilidad para establecer enlaces de voz sobre IP (Trunk IP) con proveedores y clientes. Esto se logra gracias a la utilización de SBCs y a una infraestructura interna de voz basada en el fabricante Avaya Inc. Los sistemas de VoIP en un Contact Center son los elementos clave para poder realizar la prestación del servicio; por esta razón se elige una solución redundada bajo un entorno virtual. Esta solución permite desplegar el sistema de VoIP desde cualquiera de los Data Center del Contact Center. La solución llevada a cabo en este proyecto está principalmente basada en mi experiencia laboral adquirida durante los últimos siete años en el departamento de comunicaciones de una empresa de Contact Center. He tenido en cuenta los principales requerimientos que exigen hoy en día la mayor parte de empresas que desean contratar un servicio de Contact Center. Este proyecto está dividido en cuatro capítulos. El primer capítulo es una introducción donde se explican los principales escenarios de negocio y áreas técnicas necesarias para la prestación de servicios de Contact Center. El segundo capítulo describe de manera resumida, las principales tecnologías y protocolos que serán utilizados para llevar a cabo el diseño de la solución técnica de creación de una red de comunicaciones para una empresa de Contact Center. En el tercer capítulo se expone la solución técnica necesaria para permitir que una empresa de Contact Center preste sus servicios desde distintas ubicaciones distribuidas geográficamente, utilizando dos Data Centers donde se centralizan las aplicaciones de voz y datos. Finalmente, en el cuarto capítulo se presentan las conclusiones obtenidas tras la elaboración de la presente memoria, así como una propuesta de trabajos futuros, que permitirían junto con el proyecto actual, realizar una solución técnica completa incluyendo otras áreas tecnológicas necesarias en una empresa de Contact Center. Todas las ilustraciones y tablas de este proyecto son de elaboración propia a partir de mi experiencia profesional y de la información obtenida en diversos formatos de la bibliografía consultada, excepto en los casos en los que la fuente es mencionada. ABSTRACT This project shows a network solution for a company that provides Contact Center services from different locations geographically distributed, using the Telephone over Internet Protocol (ToIP) technology. The goal of this project is to become a design guide for performing network solutions using current communications equipment developed by the manufacturer Cisco Systems, Inc., firewalls developed by the manufacturer Fortinet and telephone systems developed by Avaya Inc. and Oracle Corporation, due to their great market reputation and their contributions that each one has made in the field of Contact Center. In order to provide interconnection between its different sites, the Contact Center needs to hire the services of a telecommunications’ operator, who will use the VPN MPLS technology, with two diversified access from each Contact Center’s site. The result of this hiring is the advantage of the benefits that a telecommunications operator can offer to its customers, regarding quality of service, availability and geographical expansion. Likewise, Service Level Agreement (SLA) has to be defined to ensure the Contact Center quality communication between their sites. A quality communication is understood as a communication that is capable of being transmitted with minimum values of packet loss and transmission delays, and a speed according to the demand for its voice and data services. As part of the solution, a redundant Internet connection has to be designed to provide access to every Contact Center’s site. The local connectivity solution in each of the Contact Center’s sites has to be designed according to its volume of users and scalability that each one may have. Thereby, the manufacturer Cisco Systems, Inc. offers several options associated with the current equipment. As part of the solution, quality criteria are being defined for the choice of the Data Centers. A Contact Center has connections to/from the client companies that provide network access to teleworkers. This requires along the access and services published on the Internet, needs a security infrastructure. Therefore is been created a solution design that unifies all connections under a single infrastructure, dividing each services in a virtual way. Likewise, is been defined the use of protocols, such as 802.1X, to prevent unauthorized access to the Contact Center’s network. The voice solution chosen is heterogeneous and capable of supporting best-known signaling protocols (SIP and H.323) in order to have maximum flexibility to establish links of Voice over IP (IP Trunk) with suppliers and clients. This can be achieved through the use of SBC and an internal voice infrastructure based on Avaya Inc. The VoIP systems in a Contact Center are the key elements to be able to provide the service; for this reason a redundant solution under virtual environment is been chosen. This solution allows any of the Data Centers to deploy the VoIP system. The solution carried out in this project is mainly based on my own experience acquired during the past seven years in the communications department of a Contact Center company. I have taken into account the main requirements that most companies request nowadays when they hire a Contact Center service. This project is divided into four chapters. The first chapter is an introduction that explains the main business scenarios and technical areas required to provide Contact Center services. The second chapter describes briefly the key technologies and protocols that will be used to carry out the design of the technical solution for the creation of a communications network in a Contact Center company. The third chapter shows a technical solution required that allows a Contact Center company to provide services from across geographically distributed locations, using two Data Centers where data and voice applications are centralized. Lastly, the fourth chapter includes the conclusions gained after making this project, as well as a future projects proposal, which would allow along the current project, to perform a whole technical solution including other necessary technologic areas in a Contact Center company All illustrations and tables of this project have been made by myself from my professional experience and the information obtained in various formats of the bibliography, except in the cases where the source is indicated.
Resumo:
La evolución de las redes eléctricas se dirige hacia lo que se conoce como “Smart Grids” o “Redes Eléctricas Inteligentes”. Estas “Smart Grids” se componen de subestaciones eléctricas, que a su vez se componen de unos dispositivos llamados IEDs (Dispositivos Electrónicos Inteligentes – Intelligent Electronic Devices). El diseño de IEDs se encuentra definido en la norma IEC 61850, que especifica además un Lenguaje de Configuración de Subestaciones (Substation Configuration Language SCL) para la definición de la configuración de subestaciones y sus IEDs. Hoy en día, este estándar internacional no sólo se utiliza para diseñar correctamente IEDs y asegurar su interoperabilidad, sino que también se utiliza para el diseño de otros dispositivos de la red eléctrica, como por ejemplo, medidores inteligentes. Sin embargo, aunque existe una tendencia cada vez mayor del uso de este estándar, la comprensión y el manejo del mismo resulta difícil debido al gran volumen de información que lo compone y del nivel de detalle que utiliza, por lo que su uso para el diseño de IEDs se hace tedioso sin la ayuda de un soporte software. Es por ello que, para facilitar la aplicación del estándar IEC 61850 en el diseño de IEDs se han desarrollado herramientas como “Visual SCL”, “SCL Explorer” o “61850 SCLVisual Design Tool”. En concreto, “61850 SCLVisual Design Tool” es una herramienta gráfica para el modelado de subestaciones electricas, generada mediante el uso de los frameworks Eclipse Modeling Framework (EMF) y Epsilon Generative Modeling Technologies (GMT) y desarrollada por el grupo de investigación SYST de la UPM. El objetivo de este proyecto es añadir una nueva funcionalidad a la herramienta “61850 Visual SCL DesignTool”. Esta nueva funcionalidad consiste en la generación automática de un fichero de configuración de subestaciones eléctricas según el estándar IEC 61850 a partir de de una herramienta de diseño gráfico. Este fichero, se denomina SCD (Substation Configuration Description), y se trata de un fichero XML conforme a un esquema XSD (XML Schema Definition) mediante el que se define el lenguaje de configuración de subestaciones SCL del IEC 61850. Para el desarrollo de este proyecto, es necesario el estudio del lenguaje para la configuración de subestaciones SCL, así como del lenguaje gráfico específico de dominio definido por la herramienta “61850 SCLVisual Design Tool”, la estructura de los ficheros SCD, y finalmente, del lenguaje EGL (Epsilon Generation Language) para la transformación y generación automática de código a partir de modelos EMF. ABSTRACT Electrical networks are evolving to “Smart Grids”. Smart Grids are composed of electrical substations that in turn are composed of devices called IEDs (Intelligent Electronic Devices). The design of IEDs is defined by the IEC 61850 standard, which also specifies a Substation Configuration Languaje (SCL) used to define the configuration of substations and their IEDs. Nowadays, this international standard is not only used to design properly IEDs and guarantee their interoperability, but it is also used to design different electrical network devices, such as, smart meters. However, although the use of this standard is growing, its compression as well as its management, is still difficult due to its large volume of information and its level of detail. As a result, designing IEDs becomes a tedious task without a software support. As a consequence of this, in order to make easier the application of the IEC 61850 standard while designing IEDs, some software tools have been developed, such as: “Visual SCL”, “SCL Explorer” or “61850 SCLVisual Design Tool”. In particular, “61850 SCLVisual Design Tool” is a graphical tool used to make electrical substations models, and developed with the Eclipse Modeling Framework (EMF) and Epsilon Generative Modeling Technologies (GMT) by the research group SYST of the UPM. The aim of this project is to add a new functionality to “61850 Visual SCL DesignTool”. This new functionality consists of the automatic code generation of a substation configuration file according to the IEC 61850 standard. This file is called SCD (Substation Configuration Description), and it is a XML file that follows a XSD (XML Schema Definition) that defines the Substation Configuration Language (SCL) of the IEC 61850. In order to develop this project, it is necessary to study the Substation Configuration Language (SCL), the domain-specific graphical languaje defined by the tool “61850 SCLVisual Design Tool”, the structure of a SCD file, and the Epsilon Generation Language (EGL) used for the automatic code generation from EMF models
Resumo:
Este proyecto consiste en el diseño completo, de una red de distribución de TDT, a nivel local, mediante difusión SFN, Single Frequency Network. Este tipo de difusión, tiene la capacidad de difundir los servicios de televisión en una única frecuencia, cubriendo un área, ya sea local o estatal, aprovechando en las zonas de interferencia los rebotes de la señal y así evitar el uso de una frecuencia distinta por cada centro de emisión, todos los que componen un área de cobertura. Para el diseño de la red, se ha optado por diseñar una red IP, mediante distribución multicast, ya que esta es la tecnología imperante a día de hoy, quedando obsoleta ya, la distribución analógica, ya que consume muchos más recursos y por consiguiente mucho más costosa de implementar. El documento se divide en cuatro capítulos. En el primer capítulo se realizará una introducción teórica a las redes de distribución SFN, centrándose en el cálculo de los retardos, punto fundamental en el diseño de este tipo de redes. Se continuará unas nociones básicas de redes IP y el protocolo multicast, en el que se basa el trasporte de la señal. El capítulo dos, se centra en el diseño de la red, desde los centros de producción, donde se generan los programas a emitir, hasta los diferentes centros de difusión que cubrirán todo el área de cobertura requerida, pasando por el centro de multiplexación, donde se sitúa la cabecera que compondrá el múltiplex a difundir. Se describirán los equipos y el diseño de los distintos centros que conforman la red, centros de producción, multiplexación y difusión. A demás se realizará el cálculo de retardo de la señal, necesario en este tipo de redes. Se continuará con el capítulo tres, donde se describirá la configuración de la red, tanto a nivel de equipamiento, como el diseño y asignación IP de toda la red, separando la red de servicio de la red de gestión para una mayor confiabilidad y eficiencia de la red. Se finalizará con la descripción de la gestión de la red, que mediante diferentes herramientas, proporcionan un monitoreado en tiempo real de todo el sistema, dando la posibilidad de adelantarsey previniendo posibles incidencias que, puedan causar alguna deficiencia en el servicio que se entrega al usuario final. ABSTRACT. This project involves the complete design of a network´s TDT distribution, locally, by broadcast SFN (Single Frequency Network). This type of broadcast, has the ability to broadcast television´s services on a single frequency, covering an area, whether local or state, drawing on the interference zones, signal´s rebounds, to avoid the use of a different frequency each broadcast center, all those who make a coverage area. For the design of the network, has been chosen to design an IP network using multicast distribution, since this is the prevailing technology today, as the analogue distribution, consumes more resources and therefore, much more costly to implement. The document is divided into four chapters. In the first chapter you can find a theoretical introduction to SFN distribution networks, focusing on the calculation of delays, fundamental point, in the design of these networks. A basic understanding of IP networks and the multicast protocol, in which the transport of the signal is based, will continue. Chapter two focuses on the design of the network, from production centers, where the programs are created to broadcast, to different distribution centers covering the entire area of coverage required, through the multiplexing center, where the head is located, which comprise the multiplex. Also, the equipment and design of the various centers in the network, production centers, multiplexing center and distribution centers, are described. Furthermore, the calculation of signal delay, necessary in such networks, is performed. We will continue with the chapter three, where the network configuration will be described, both in termsofequipment, such as design IP mapping of the entire network, separating the service network and management network, for increased the reliability and efficiency of the network. It will be completed with the description of the management of the network, using different tools provide real-time monitoring of the entire system, making it possible, to anticipate and prevent any incidents that might cause a deficiency in the service being delivered to final user.
Resumo:
In a Finite Element (FE) analysis of elastic solids several items are usually considered, namely, type and shape of the elements, number of nodes per element, node positions, FE mesh, total number of degrees of freedom (dot) among others. In this paper a method to improve a given FE mesh used for a particular analysis is described. For the improvement criterion different objective functions have been chosen (Total potential energy and Average quadratic error) and the number of nodes and dof's of the new mesh remain constant and equal to the initial FE mesh. In order to find the mesh producing the minimum of the selected objective function the steepest descent gradient technique has been applied as optimization algorithm. However this efficient technique has the drawback that demands a large computation power. Extensive application of this methodology to different 2-D elasticity problems leads to the conclusion that isometric isostatic meshes (ii-meshes) produce better results than the standard reasonably initial regular meshes used in practice. This conclusion seems to be independent on the objective function used for comparison. These ii-meshes are obtained by placing FE nodes along the isostatic lines, i.e. curves tangent at each point to the principal direction lines of the elastic problem to be solved and they should be regularly spaced in order to build regular elements. That means ii-meshes are usually obtained by iteration, i.e. with the initial FE mesh the elastic analysis is carried out. By using the obtained results of this analysis the net of isostatic lines can be drawn and in a first trial an ii-mesh can be built. This first ii-mesh can be improved, if it necessary, by analyzing again the problem and generate after the FE analysis the new and improved ii-mesh. Typically, after two first tentative ii-meshes it is sufficient to produce good FE results from the elastic analysis. Several example of this procedure are presented.
Resumo:
We have previously shown that in HEp-2 cells, multivesicular bodies (MVBs) processing internalized epidermal growth factor–epidermal growth factor receptor complexes mature and fuse directly with lysosomes in which the complexes are degraded. The MVBs do not fuse with a prelysosomal compartment enriched in mannose 6-phosphate receptor (M6PR) as has been described in other cell types. Here we show that the cation-independent M6PR does not become enriched in the endocytic pathway en route to the lysosome, but if a pulse of M6PR or an M6PR ligand, cathepsin D, is followed, a significant fraction of these proteins are routed from the trans-Golgi to MVBs. Accumulation of M6PR does not occur because when the ligand dissociates, the receptor rapidly leaves the MVB. At steady state, most M6PR are distributed within the trans-Golgi and trans-Golgi network and in vacuolar structures distributed in the peripheral cytoplasm. We suggest that these M6PR-rich vacuoles are on the return route from MVBs to the trans-Golgi network and that a separate stable M6PR-rich compartment equivalent to the late endosome/prelysosome stage does not exist on the endosome–lysosome pathway in these cells.
Resumo:
Previous studies have shown that when the cytosolic domains of the type I membrane proteins TGN38 and lysosomal glycoprotein 120 (lgp120) are added to a variety of reporter molecules, the resultant chimeric molecules are localized to the trans-Golgi network (TGN) and to lysosomes, respectively. In the present study we expressed chimeric constructs of rat TGN38 and rat lgp120 in HeLa cells. We found that targeting information in the cytosolic domain of TGN38 could be overridden by the presence of the lumenal and transmembrane domains of lgp120. In contrast, the presence of the transmembrane and cytosolic domains of TGN38 was sufficient to deliver the lumenal domain of lgp120 to the trans-Golgi network. On the basis of steady-state localization of the various chimeras and antibody uptake experiments, we propose that there is a hierarchy of targeting information in each molecule contributing to sorting within the endocytic pathway. The lumenal and cytosolic domains of lgp120 contribute to sorting and delivery to lysosomes, whereas the transmembrane and cytosolic domains of TGN38 contribute to sorting and delivery to the trans-Golgi network.
Resumo:
Gamma oscillations synchronized between distant neuronal populations may be critical for binding together brain regions devoted to common processing tasks. Network modeling predicts that such synchrony depends in part on the fast time course of excitatory postsynaptic potentials (EPSPs) in interneurons, and that even moderate slowing of this time course will disrupt synchrony. We generated mice with slowed interneuron EPSPs by gene targeting, in which the gene encoding the 67-kDa form of glutamic acid decarboxylase (GAD67) was altered to drive expression of the α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) glutamate receptor subunit GluR-B. GluR-B is a determinant of the relatively slow EPSPs in excitatory neurons and is normally expressed at low levels in γ-aminobutyric acid (GABA)ergic interneurons, but at high levels in the GAD-GluR-B mice. In both wild-type and GAD-GluR-B mice, tetanic stimuli evoked gamma oscillations that were indistinguishable in local field potential recordings. Remarkably, however, oscillation synchrony between spatially separated sites was severely disrupted in the mutant, in association with changes in interneuron firing patterns. The congruence between mouse and model suggests that the rapid time course of AMPA receptor-mediated EPSPs in interneurons might serve to allow gamma oscillations to synchronize over distance.
Resumo:
The conversion of light to chemical energy by the process of photosynthesis is localized to the thylakoid membrane network in plant chloroplasts. Although several pathways have been described that target proteins into and across the thylakoids, little is known about the origin of this membrane system or how the lipid backbone of the thylakoids is transported and fused with the target membrane. Thylakoid biogenesis and maintenance seem to involve the flow of membrane elements via vesicular transport. Here we show by mutational analysis that deletion of a single gene called VIPP1 (vesicle-inducing protein in plastids 1) is deleterious to thylakoid membrane formation. Although VIPP1 is a hydrophilic protein it is found in both the inner envelope and the thylakoid membranes. In VIPP1 deletion mutants vesicle formation is abolished. We propose that VIPP1 is essential for the maintenance of thylakoids by a transport pathway not previously recognized.