Lead time reduction for new products

The research, which was given the terms of reference, "To cut the lead time for getting new products into volume production", was sponsored by a company which develops and manufactures telecommunications equipment. The research described was based on studies made of the development of two processors which were designed to control telephone exchanges in the public network. It was shown that for each of these products, which were large electronic systems containing both hardware and software, most of their lead time was taken up with development. About half of this time was consumed by activities associated with redesign resulting from changes found to be necessary after the original design had been built. Analysing the causes of design changes showed the most significant to be Design Faults. The reasons why these predominated were investigated by seeking the collective opinion from design staff and their management using a questionnaire. Using the results from these studies to build upon the works of other authors, a model of the development process of large hierarchical systems is derived. An important feature of this model is its representation of iterative loops due to design changes. In order to reduce the development time, two closely related philosophies are proposed: By spending more time at the early stages of development (detecting and remedying faults in the design) even greater savings can be made later on, The collective performance of the development organisation would be improved by increasing the amount and speed of feedback about that performance. A trial was performed to test these philosophies using readily available techniques for design verification. It showed that about an 11 per cent saving would be made on the development time and that the philosophies might be equally successfully applied to other products and techniques.

Vision2020 and the English language : a study of the role of language in national development.

The research reported here is an investigation into the problems of social and economic development of a multiethic and multicultural country which has the added challenge of adopting a non-indigenous code to facilitate the development process. Malaysia's power to negotiate outcomes favourable to the interest of the country is critical for the successful attainment of the goals and objectives of VISION2020. Therefore the mechanisms of the human resource development programme have to be efficacious. The three hypotheses of this study are as follows: 1. there is a fear that the problems and challenges posed by the development plans, have been conceptually trivialised; 2. based on (1) above there is a concern that solutions proposed are inadequate and inappropriate and 3. the outcome of both (1) and (2) can lead to the potential underachievement of national goals and objectives. The study proposes a complex model for conceptualising the problem which looks at the relationship between society and language, which any solutions proposed must take into proper consideration. The study looks at the mechanisms available for the smooth absorption of new Malaysian members to new and international communities. A large scale investigation was undertaken with the researcher functioning as a participant observer. An in-depth study of one particular educational ecology yielded approximately 38 hours of interviews and 100 questionnaires. These data were analysed both for explicit information and implicit implications. By some criteria national policies appear to be having the desired effect, and can be given a clean bill of health. By others it is clear that major adjustments would be necessary if the nation is to achieve its objectives in full. Based on the evidence gathered, thr study proposes an apprenticeship approach to training programmes for effective participation of new members in the new ecologies.

Designing mobile technologies for individuals with disabilities

While mobile devices offer many innovative possibilities to help increase the standard of living for individuals with disabilities and other special needs, the process of developing assistive technology, such that it will be effective across a group of individuals with a particular disability, can be extremely challenging. This chapter discusses key issues and trends related to designing and evaluating mobile assistive technology for individuals with disabilities. Following an overview of general design process issues, we argue (based on current research trends) that individuals with disabilities and domain experts be involved throughout the development process. While this, in itself, presents its own set of challenges, many strategies have successfully been used to overcome the difficulties and maximize the contributions of users and experts alike. Guidelines based on these strategies are discussed and are illustrated with real examples from one of our active research projects.

Application of genomics, proteomics and metabolomics in drug discovery, development and clinic

Genomics, proteomics and metabolomics are three areas that are routinely applied throughout the drug-development process as well as after a product enters the market. This review discusses all three 'omics, reporting on the key applications, techniques, recent advances and expectations of each. Genomics, mainly through the use of novel and next-generation sequencing techniques, has advanced areas of drug discovery and development through the comparative assessment of normal and diseased-state tissues, transcription and/or expression profiling, side-effect profiling, pharmacogenomics and the identification of biomarkers. Proteomics, through techniques including isotope coded affinity tags, stable isotopic labeling by amino acids in cell culture, isobaric tags for relative and absolute quantification, multidirectional protein identification technology, activity-based probes, protein/peptide arrays, phage displays and two-hybrid systems is utilized in multiple areas through the drug development pipeline including target and lead identification, compound optimization, throughout the clinical trials process and after market analysis. Metabolomics, although the most recent and least developed of the three 'omics considered in this review, provides a significant contribution to drug development through systems biology approaches. Already implemented to some degree in the drug-discovery industry and used in applications spanning target identification through to toxicological analysis, metabolic network understanding is essential in generating future discoveries.

Organisational receptivity for change:combining context and capability to explain competitive advantage

This thesis explores efforts to conjoin organisational contexts and capabilities in explaining sustainable competitive advantage. Oliver (1997) argued organisations need to balance the need to conform to industry’s requirements to attain legitimization (e.g. DiMaggio & Powell, 1983), and the need for resource optimization (e.g. Barney, 1991). The author hypothesized that such balance can be viewed as movements along the homogeneity-heterogeneity continuum. An organisation in a homogenous industry possesses similar characteristics as its competitors, as opposed to a heterogeneous industry in which organisations within are differentiated and competitively positioned (Oliver, 1997). The movement is influenced by the dynamic environmental conditions that an organisation is experiencing. The author extended Oliver’s (1997) propositions of combining RBV’s focus on capabilities with institutional theory’s focus on organisational context, as well as redefining organisational receptivity towards change (ORC) factors from Butler and Allen’s (2008) findings. The authors contributed to the theoretical development of ORC theory to explain the attainment of sustainable competitive advantage. ORC adopts the assumptions from both institutional and RBV theories, where the receptivity factors include both organisational contexts and capabilities. The thesis employed a mixed method approach in which sequential qualitative quantitative studies were deployed to establish a robust, reliable, and valid ORC scale. The adoption of Hinkin’s (1995) three-phase scale development process was updated, thus items generated from interviews and literature reviews went through numerous exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) to achieve convergent, discriminant, and nomological validities. Samples in the first phase (semi structured interviews) were hotel owners and managers. In the second phase, samples were MBA students, and employees of private and public sectors. In the third phase, samples were hotel managers. The final ORC scale is a parsimonious second higher-order latent construct. The first-order constructs comprises four latent receptivity factors which are ideological vision (4 items), leading change (4 items), implementation capacity (4 items), and change orientation (7 items). Hypotheses testing revealed that high levels of perceived environmental uncertainty leads to high levels of receptivity factor. Furthermore, the study found a strong positive correlation between receptivity factors and competitive advantage, and between receptivity factors and organisation performance. Mediation analyses revealed that receptivity factors partially mediate the relationship between perceived environmental uncertainty, competitive advantage and organisational performance.

Designing mobile technologies for individuals with disabilities

While mobile devices offer many innovative possibilities to help increase the standard of living for individuals with disabilities and other special needs, the process of developing assistive technology, such that it will be effective across a group of individuals with a particular disability, can be extremely challenging. This chapter discusses key issues and trends related to designing and evaluating mobile assistive technology for individuals with disabilities. Following an overview of general design process issues, we argue (based on current research trends) that individuals with disabilities and domain experts be involved throughout the development process. While this, in itself, presents its own set of challenges, many strategies have successfully been used to overcome the difficulties and maximize the contributions of users and experts alike. Guidelines based on these strategies are discussed and are illustrated with real examples from one of our active research projects.

Semisupervised learning of hierarchical latent trait models for data visualization

Recently, we have developed the hierarchical Generative Topographic Mapping (HGTM), an interactive method for visualization of large high-dimensional real-valued data sets. In this paper, we propose a more general visualization system by extending HGTM in three ways, which allows the user to visualize a wider range of data sets and better support the model development process. 1) We integrate HGTM with noise models from the exponential family of distributions. The basic building block is the Latent Trait Model (LTM). This enables us to visualize data of inherently discrete nature, e.g., collections of documents, in a hierarchical manner. 2) We give the user a choice of initializing the child plots of the current plot in either interactive, or automatic mode. In the interactive mode, the user selects "regions of interest," whereas in the automatic mode, an unsupervised minimum message length (MML)-inspired construction of a mixture of LTMs is employed. The unsupervised construction is particularly useful when high-level plots are covered with dense clusters of highly overlapping data projections, making it difficult to use the interactive mode. Such a situation often arises when visualizing large data sets. 3) We derive general formulas for magnification factors in latent trait models. Magnification factors are a useful tool to improve our understanding of the visualization plots, since they can highlight the boundaries between data clusters. We illustrate our approach on a toy example and evaluate it on three more complex real data sets. © 2005 IEEE.

Application of genomics, proteomics and metabolomics in drug discovery, development and clinic

Genomics, proteomics and metabolomics are three areas that are routinely applied throughout the drug-development process as well as after a product enters the market. This review discusses all three 'omics, reporting on the key applications, techniques, recent advances and expectations of each. Genomics, mainly through the use of novel and next-generation sequencing techniques, has advanced areas of drug discovery and development through the comparative assessment of normal and diseased-state tissues, transcription and/or expression profiling, side-effect profiling, pharmacogenomics and the identification of biomarkers. Proteomics, through techniques including isotope coded affinity tags, stable isotopic labeling by amino acids in cell culture, isobaric tags for relative and absolute quantification, multidirectional protein identification technology, activity-based probes, protein/peptide arrays, phage displays and two-hybrid systems is utilized in multiple areas through the drug development pipeline including target and lead identification, compound optimization, throughout the clinical trials process and after market analysis. Metabolomics, although the most recent and least developed of the three 'omics considered in this review, provides a significant contribution to drug development through systems biology approaches. Already implemented to some degree in the drug-discovery industry and used in applications spanning target identification through to toxicological analysis, metabolic network understanding is essential in generating future discoveries.

What matters in business incubation? A literature review and a suggestion for situated theorising

Purpose – The purpose of this paper is twofold: first, to provide a critical assessment of the literature on business incubation effectiveness and second, to submit a situated theoretical perspective on how business incubation management can provide an environment that supports the development of incubatee entrepreneurs and their businesses. Design/methodology/approach – The paper provides a narrative critical assessment of the literature on business incubation effectiveness. Definitional issues, performance aspects and approaches to establishing critical success factors in business incubation are discussed. Business incubation management is identified as an overarching factor for theorising on business incubation effectiveness. Findings – The literature on business incubation effectiveness suffers from several deficiencies, including definitional incongruence, descriptive accounts, fragmentation and lack of strong conceptual grounding. Notwithstanding the growth of research on this domain, understanding of how entrepreneurs and their businesses develop within the business incubator environment remains limited. Given the importance of relational, intangible factors in business incubation and the critical role of business incubation management in orchestrating and optimising such factors, it is suggested that theorising efforts would benefit from a situated perspective. Originality/value – The identification of specific shortcomings in the literature on business incubation highlights the need for more systematic efforts towards theory building. It is suggested that focusing on the role of business incubation management from a situated learning theory perspective can lend itself to a more profound understanding of the development process of incubatee entrepreneurs and their firms. Theoretical propositions are offered to this effect, as well as avenues for future research.

Climate setting in sourcing teams:developing a measurement scale for team creativity climate

Creative sourcing strategies, designed to extract more value from the supply base, have become a competitive, strategic differentiator. To fuel creativity, companies install sourcing teams that can capitalize on the specialized knowledge and expertise of their employees across the company. This article introduces the concept of a team creativity climate (TCC) - team members' shared perceptions of their joint policies, procedures, and practices with respect to developing creative sourcing strategies – as a means to address the unique challenges associated with a collective, cross-functional approach to develop value-enhancing sourcing strategies. Using a systematic scale development process that validates the proposed concept, the authors confirm its ability to predict sourcing team performance, and suggest some research avenues extending from this concept.

Practice based learning for automotive engineering design students

The automotive industry combines a multitude of professionals to develop a modern car successfully. Within the design and development teams the collaboration and interface between Engineers and Designers is critical to ensure design intent is communicated and maintained throughout the development process. This study highlights recent industry practice with the emergence of Concept Engineers in design teams at Jaguar Land Rover Automotive group. The role of the Concept Engineer emphasises the importance of the Engineering and Design/Styling interface with the Concept engineer able to interact and understand the challenges and specific languages of each specialist area, hence improving efficiency and communication within the design team. Automotive education tends to approach design from two distinct directions, that of engineering design through BSc courses or a more styling design approach through BA and BDes routes. The educational challenge for both types of course is to develop engineers and stylist's who have greater understanding and experience of each other's specialist perspective of design and development. The study gives examples of two such courses in the UK who are developing programmes to help students widen their understanding of the engineering and design spectrum. Initial results suggest the practical approach has been well received by students and encouraged by industry as they seek graduates with specialist knowledge but also a wider appreciation of their role within the design process.

Food SMEs’ innovation profile – the Hungarian case

The small and medium sized enterprises (SMEs) in the Hungarian agri-food sector play determining role. The innovation capacity (efforts, activities and results) however of the individual SMEs is very limited. Food production (including SMEs) has to fulfil food safety requirements in a rapidly increasing extent, which implies a continuous innovation and development process from all market players. In Hungary the agri-food sector had to face a suddenly increased competition especially after the EU enlargement. Based on survey data this paper examines the efforts, activities and results in knowledge acquisition, utilisation, coordination and transfer in the Central Hungarian food SMEs. We have found (using ordered logistic regression) that R&D expenditures, achieved innovations, export/import orientation as well as the networking activity of the SMEs play significant role in market development.

Innovation across the food chain – the Hungarian case

The small and medium sized enterprises (SMEs) in the Hungarian agri-food sector play determining role. The innovation capacity (efforts, activities and results) however of the individual SMEs is very limited. Food production (including SMEs) has to fulfil food safety requirements in a rapidly increasing extent, which implies a continuous innovation and development process from all market players. In Hungary the agri-food chain had to face a suddenly increased competition especially after the EU enlargement. Based on survey data this paper examines the efforts, activities and results in knowledge acquisition, utilisation, coordination and transfer in the Central Hungarian food SMEs. We have found (using ordered logistic regression) that R&D expenditures, achieved innovations, export/import orientation as well as the networking activity of the SMEs play significant role in market development.

What is the Future of Strategic Management?

The history of planning and creating strategies has a past of over half a century. Throughout this lifetime period we have witnessed both the evolution of theory and practice. The MBA study books in the last-third of the 20th century have with predilection exhibited this very process as a complex of monetary centered budget planning, forecast-based planning, strategic planning and strategic management. There might be a controversy existing about the naming, characteristics and timing of these different sections but there is an accordance that the changes that we have taken place in the last decade as a whole without a doubt can be derived from these very changes in the business environment or in some outstanding cases (like 9/11) they can be acknowledged as the ability of corporate foreseeing and the ability to adapt to the vision of the future. The main purposes of the research is to provide a summarized picture about the changing process of this procedure during last decades as far as the planning and creating strategies are concerned and also their milestones and periods. Try to explore and systemize the very aspects of these changes. The happenings of the first decade of the new millennium are outstandingly interesting if we consider their real effect on the theory and practice of strategic management. Let us remember the euphoria around the year 2000, the predictions of „new technologies”, „new economy”, „new organization” and „new leadership”. We have implied before on the destruction of the twin towers of the World Trade Center which meant a new era, a new quality of international terrorism and its consequences (Afghanistan, Iraq). But the „product” of this decade is the strategic aim that companies focus on, which is the social responsibility regarding the unavoidance of the effects of climate change on the long run. During the research the big question has risen concerning how did the science of strategic management do as far as the predictions of the global monetary and economic crisis are concerned? And also its solutions this very science has to offer in order to handle and get over the crisis. Does it conclude from the answers given to the questions that a change in paradigms are necessary, a new quality is needed or may be we have come to a new crossroad of the development process that will take over strategic management? (...)

Az SAP-rendszer fejlesztése egy műanyag-feldolgozó vállalatnál (Development of SAP system in a plastic manufacturing company)

Az SAP-rendszernek a kontrollingszervezetek működésére gyakorolt pozitív hatása nem titok. A visszacsatolás lehetőségének biztosításával alkalom nyílik a szervezetek tevékenységének követésére, ellenőrzésére, felülbírálására. A logisztika mint az egész vállalatot átszövő rendszer, működésének nyomon követése is létfontosságúvá vált, hiszen összetettségéből kifolyólag jellegzetességei, színvonala az egész rendszerre hatást gyakorol. A logisztikai rendszer és folyamatainak figyelemmel kísérésére a logisztikai kontrollingrendszer nyújt megoldást, visszacsatolási pontjain keresztül. A műanyag-feldolgozó vállalat esetében a szervezeti SAP-rendszer logisztikai kontrollingterületének fejlesztésétől várják a szervezeti hatékonyság emelkedését és a jobb színvonal elérését. _____ Positive effect of the SAP system on the operation of controlling organisations has not been a secret. Opportunity of the feedback will be possible to track, control, override operation of the organisations. The logistic controlling system provides a solution through feedback points for monitoring the logistic system and processes. In the case of plastics manufacturing company the increasing of organisational efficiency and achievement of a better standard is anticipated from development of logistic controlling area of the organisational SAP system.