Numerical analysis of control surface effects on AUV

Computational fluid dynamics, CFD, is becoming an essential tool in the prediction of the hydrodynamic efforts and flow characteristics of underwater vehicles for manoeuvring studies. However, when applied to the manoeuvrability of autonomous underwater vehicles, AUVs, most studies have focused on the de- termination of static coefficients without considering the effects of the vehicle control surface deflection. This paper analyses the hydrodynamic efforts generated on an AUV considering the combined effects of the control surface deflection and the angle of attack using CFD software based on the Reynolds-averaged Navier–Stokes formulations. The CFD simulations are also independently conducted for the AUV bare hull and control surface to better identify their individual and interference efforts and to validate the simulations by comparing the experimental results obtained in a towing tank. Several simulations of the bare hull case were conducted to select the k –ω SST turbulent model with the viscosity approach that best predicts its hydrodynamic efforts. Mesh sensitivity analyses were conducted for all simulations. For the flow around the control surfaces, the CFD results were analysed according to two different methodologies, standard and nonlinear. The nonlinear regression methodology provides better results than the standard methodology does for predicting the stall at the control surface. The flow simulations have shown that the occurrence of the control surface stall depends on a linear relationship between the angle of attack and the control surface deflection. This type of information can be used in designing the vehicle’s autopilot system.

Model and control of tendon actuated robots

The use of tendons for the transmission of the forces and the movements in robotic devices has been investigated from several researchers all over the world. The interest in this kind of actuation modality is based on the possibility of optimizing the position of the actuators with respect to the moving part of the robot, in the reduced weight, high reliability, simplicity in the mechanic design and, finally, in the reduced cost of the resulting kinematic chain. After a brief discussion about the benefits that the use of tendons can introduce in the motion control of a robotic device, the design and control aspects of the UB Hand 3 anthropomorphic robotic hand are presented. In particular, the tendon-sheaths transmission system adopted in the UB Hand 3 is analyzed and the problem of force control and friction compensation is taken into account. The implementation of a tendon based antagonistic actuated robotic arm is then investigated. With this kind of actuation modality, and by using transmission elements with nonlinear force/compression characteristic, it is possible to achieve simultaneous stiffness and position control, improving in this way the safety of the device during the operation in unknown environments and in the case of interaction with other robots or with humans. The problem of modeling and control of this type of robotic devices is then considered and the stability analysis of proposed controller is reported. At the end, some tools for the realtime simulation of dynamic systems are presented. This realtime simulation environment has been developed with the aim of improving the reliability of the realtime control applications both for rapid prototyping of controllers and as teaching tools for the automatic control courses.

Nonlinear Control of Magnetically Actuated Spacecraft

The topic of this thesis is the feedback stabilization of the attitude of magnetically actuated spacecraft. The use of magnetic coils is an attractive solution for the generation of control torques on small satellites flying inclined low Earth orbits, since magnetic control systems are characterized by reduced weight and cost, higher reliability, and require less power with respect to other kinds of actuators. At the same time, the possibility of smooth modulation of control torques reduces coupling of the attitude control system with flexible modes, thus preserving pointing precision with respect to the case when pulse-modulated thrusters are used. The principle based on the interaction between the Earth's magnetic field and the magnetic field generated by the set of coils introduces an inherent nonlinearity, because control torques can be delivered only in a plane that is orthogonal to the direction of the geomagnetic field vector. In other words, the system is underactuated, because the rotational degrees of freedom of the spacecraft, modeled as a rigid body, exceed the number of independent control actions. The solution of the control issue for underactuated spacecraft is also interesting in the case of actuator failure, e.g. after the loss of a reaction-wheel in a three-axes stabilized spacecraft with no redundancy. The application of well known control strategies is no longer possible in this case for both regulation and tracking, so that new methods have been suggested for tackling this particular problem. The main contribution of this thesis is to propose continuous time-varying controllers that globally stabilize the attitude of a spacecraft, when magneto-torquers alone are used and when a momentum-wheel supports magnetic control in order to overcome the inherent underactuation. A kinematic maneuver planning scheme, stability analyses, and detailed simulation results are also provided, with new theoretical developments and particular attention toward application considerations.

Development of control-oriented models of Dual Clutch Transmission systems

A control-oriented model of a Dual Clutch Transmission was developed for real-time Hardware In the Loop (HIL) applications, to support model-based development of the DCT controller. The model is an innovative attempt to reproduce the fast dynamics of the actuation system while maintaining a step size large enough for real-time applications. The model comprehends a detailed physical description of hydraulic circuit, clutches, synchronizers and gears, and simplified vehicle and internal combustion engine sub-models. As the oil circulating in the system has a large bulk modulus, the pressure dynamics are very fast, possibly causing instability in a real-time simulation; the same challenge involves the servo valves dynamics, due to the very small masses of the moving elements. Therefore, the hydraulic circuit model has been modified and simplified without losing physical validity, in order to adapt it to the real-time simulation requirements. The results of offline simulations have been compared to on-board measurements to verify the validity of the developed model, that was then implemented in a HIL system and connected to the TCU (Transmission Control Unit). Several tests have been performed: electrical failure tests on sensors and actuators, hydraulic and mechanical failure tests on hydraulic valves, clutches and synchronizers, and application tests comprehending all the main features of the control performed by the TCU. Being based on physical laws, in every condition the model simulates a plausible reaction of the system. The first intensive use of the HIL application led to the validation of the new safety strategies implemented inside the TCU software. A test automation procedure has been developed to permit the execution of a pattern of tests without the interaction of the user; fully repeatable tests can be performed for non-regression verification, allowing the testing of new software releases in fully automatic mode.

Model predictive control in thermal management of multiprocessor systems-on-chip

MultiProcessor Systems-on-Chip (MPSoC) are the core of nowadays and next generation computing platforms. Their relevance in the global market continuously increase, occupying an important role both in everydaylife products (e.g. smartphones, tablets, laptops, cars) and in strategical market sectors as aviation, defense, robotics, medicine. Despite of the incredible performance improvements in the recent years processors manufacturers have had to deal with issues, commonly called “Walls”, that have hindered the processors development. After the famous “Power Wall”, that limited the maximum frequency of a single core and marked the birth of the modern multiprocessors system-on-chip, the “Thermal Wall” and the “Utilization Wall” are the actual key limiter for performance improvements. The former concerns the damaging effects of the high temperature on the chip caused by the large power densities dissipation, whereas the second refers to the impossibility of fully exploiting the computing power of the processor due to the limitations on power and temperature budgets. In this thesis we faced these challenges by developing efficient and reliable solutions able to maximize performance while limiting the maximum temperature below a fixed critical threshold and saving energy. This has been possible by exploiting the Model Predictive Controller (MPC) paradigm that solves an optimization problem subject to constraints in order to find the optimal control decisions for the future interval. A fully-distributedMPC-based thermal controller with a far lower complexity respect to a centralized one has been developed. The control feasibility and interesting properties for the simplification of the control design has been proved by studying a partial differential equation thermal model. Finally, the controller has been efficiently included in more complex control schemes able to minimize energy consumption and deal with mixed-criticalities tasks

Influence of optic flow on postural control

The study of optic flow on postural control may explain how self-motion perception contributes to postural stability in young males and females and how such function changes in the old falls risk population. Study I: The aim was to examine the optic flow effect on postural control in young people (n=24), using stabilometry and surface-electromyography. Subjects viewed expansion and contraction optic flow stimuli which were presented full field, in the foveral or in the peripheral visual field. Results showed that optic flow stimulation causes an asymmetry in postural balance and a different lateralization of postural control in men and women. Gender differences evoked by optic flow were found both in the muscle activity and in the prevalent direction of oscillation. The COP spatial variability was reduced during the view of peripheral stimuli which evoked a clustered prevalent direction of oscillation, while foveal and random stimuli induced non-distributed directions. Study II was aimed at investigating the age-related mechanisms of postural stability during the view of optic flow stimuli in young (n=17) and old (n=19) people, using stabilometry and kinematic. Results showed that old people showed a greater effort to maintain posture during the view of optic flow stimuli than the young. Elderly seems to use the head stabilization on trunk strategy. Visual stimuli evoke an excitatory input on postural muscles, but the stimulus structure produces different postural effects. Peripheral optic flow stabilizes postural sway, while random and foveal stimuli provoke larger sway variability similar to those evoked in baseline. Postural control uses different mechanisms within each leg to produce the appropriate postural response to interact with extrapersonal environment. Ageing reduce the effortlessness to stabilize posture during optic flow, suggesting a neuronal processing decline associated with difficulty integrating multi-sensory information of self-motion perception and increasing risk of falls.

Aureobasidium pullulans as biological control agent: modes of action

The postharvest phase has been considered an environment very suitable for successful application of biological control agents (BCAs). However, the tri-interaction between fungal pathogen, host (fruit) and antagonist is influenced by several parameters such as temperature, oxidative stresses, oxygen composition, water activity, etc. that could be determining for the success of biocontrol. Knowledge of the modes of action of BCAs is essential in order to enhance their viability and increase their potentialities in disease control. The thesis focused on the possibility to explain the modes of action of a biological control agent (BCA): Aureobasidium pullulans, in particular the strains L1 and L8, control effective against fruit postharvest fungal pathogen. In particular in this work were studied the different modes of action of BCA, such as: i) the ability to produce volatile organic compounds (VOCs), identified by SPME- gas chromatography-mass spectrometry (GC-MS) and tested by in vitro and in vivo assays against Penicillium spp., Botrytis cinerea, Colletotrichum acutatum; ii) the ability to produce lytic enzymes (exo and endo chitinase and β-1,3-glucanase) tested against Monilinia laxa, causal agent of brown rot of stone fruits. L1 and L8 lytic enzymes were also evaluated through their relative genes by molecular tools; iii) the competition for space and nutrients, such as sugars (sucrose, glucose and fructose) and iron; the latter induced the production of siderophores, molecules with high affinity for iron chelation. A molecular investigation was carried out to better understand the gene regulation strictly correlated to the production of these chelating molucules. The competition for space against M. laxa was verified by electron microscopy techniques; iv) a depth bibliographical analysis on BCAs mechanisms of action and their possible combination with physical and chemical treatments was conducted.

Metabolic control of type 1 diabetic patients followed at the University Children's Hospital in Berne: Have we reached the goal?

In type 1 diabetes (T1DM), a good metabolic control is important to reduce and/or postpone complications. Guidelines regarding how to achieve this goal are published by the American Diabetes Association (ADA) and the International Society of Paediatric and Adolescence Diabetes (ISPAD). The aims of this study were to determine the current level of metabolic control in T1DM patients on different treatment regimens, followed at the diabetes outpatient unit of the University Children's Hospital Bern, Switzerland, and to compare it with both the reported data from ten years ago (1998) and with the current guidelines of the ADA and ISPAD.

Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r(2) ? -0.86) as well as calcium release (r(2) ? -0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r(2) = 0.42-0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo.

Neural correlates of disbalanced motor control in major depression

Motor retardation is a common symptom of major depressive disorder (MDD). Despite the existence of various assessment methods, little is known on the pathobiology of motor retardation. We aimed to elucidate aspects of motor control investigating the association of objective motor activity and resting state cerebral blood flow (CBF).

Quality Control in the Healthcare Industry: An Analysis of Surgery Turnover Times

For virtually all hospitals, utilization rates are a critical managerial indicator of efficiency and are determined in part by turnover time. Turnover time is defined as the time elapsed between surgeries, during which the operating room is cleaned and preparedfor the next surgery. Lengthier turnover times result in lower utilization rates, thereby hindering hospitals’ ability to maximize the numbers of patients that can be attended to. In this thesis, we analyze operating room data from a two year period provided byEvangelical Community Hospital in Lewisburg, Pennsylvania, to understand the variability of the turnover process. From the recorded data provided, we derive our best estimation of turnover time. Recognizing the importance of being able to properly modelturnover times in order to improve the accuracy of scheduling, we seek to fit distributions to the set of turnover times. We find that log-normal and log-logistic distributions are well-suited to turnover times, although further research must validate this finding. Wepropose that the choice of distribution depends on the hospital and, as a result, a hospital must choose whether to use the log-normal or the log-logistic distribution. Next, we use statistical tests to identify variables that may potentially influence turnover time. We find that there does not appear to be a correlation between surgerytime and turnover time across doctors. However, there are statistically significant differences between the mean turnover times across doctors. The final component of our research entails analyzing and explaining the benefits of introducing control charts as a quality control mechanism for monitoring turnover times in hospitals. Although widely instituted in other industries, control charts are notwidely adopted in healthcare environments, despite their potential benefits. A major component of our work is the development of control charts to monitor the stability of turnover times. These charts can be easily instituted in hospitals to reduce the variabilityof turnover times. Overall, our analysis uses operations research techniques to analyze turnover times and identify manners for improvement in lowering the mean turnover time and thevariability in turnover times. We provide valuable insight into a component of the surgery process that has received little attention, but can significantly affect utilization rates in hospitals. Most critically, an ability to more accurately predict turnover timesand a better understanding of the sources of variability can result in improved scheduling and heightened hospital staff and patient satisfaction. We hope that our findings can apply to many other hospital settings.

The Impact of Parental Psychological Control on College Students’ Relational Aggression and Friendship Quality

The present study investigated the relationships between parental psychological control and college students’ relational aggression and friendship quality. Based on previous research, it was expected that parents’ use of psychological control would be associated with students’ increased use of relational aggression with peers and lower friendship quality. Students completed a series of survey measures assessing their mothers’ and fathers’ use of psychological control, behavioral control, and warmth/acceptance. Students also completed a series of survey measures assessing their friendship quality, social skills, relational aggression, self-esteem, and social desirability. The study’s findings revealed that parental psychological control was associated with and predicted students’ increased use of relational aggression with peers. Parental psychological control was also associated with students’ lower friendship quality. However, parents’ use of psychological control did not predict students’ friendship quality after accounting for the influence of students’ personal and peer relationship variables. This finding suggests that characteristics of peer relationships may play a larger role than parenting behaviors in shaping college students’ friendships. The study also found that students who displayed higher levels of relational aggression had lower quality friendships. Other findings revealed that the relationship between parental psychological control and students’ friendship quality can be partially explained by students’ use of relational aggression with peers. Students’ friendship quality can also help to explain the influence of parental psychological control on students’ relational aggression. In addition, the study found that combinations of parenting behaviors were more informative predictors of students’ relational aggression and friendship quality than psychological control alone. Finally, this study revealed the importance of assessing participants’ social desirability when measuring sensitive personal qualities such as relational aggression, friendship quality, and self-esteem. Overall, this study contributes to the field of research on parental psychological control by revealing its effects on college students’ relational aggression and friendship quality.

The Constitutional-Judicial Control of the Legislative and Executive Powers in Central and Eastern European Countries

This project looked at the nature, contents, methods, means and legal and political effects of the influence that constitutional courts exercise upon the legislative and executive powers in the newly established democracies of Central and Eastern Europe. The basic hypothesis was that these courts work to provide a limitation of political power within the framework of the principal constitutional values and that they force the legislature and executive to exercise their powers and duties in strict accordance with the constitution. Following a study of the documentary sources, including primarily the relevant constitutional and statutory provisions and decisions of constitutional courts, Mr. Cvetkovski prepared a questionnaire on various aspects of the topics researched and sent it to the respective constitutional courts. A series of direct interviews with court officials in six of the ten countries then served to clarify a large number of questions relating to differences in procedures etc. that arose from the questionnaires. As a final stage, the findings were compared with those described in recent publications on constitutional control in general and in Central and Eastern Europe in particular. The study began by considering the constitutional and political environment of the constitutional courts' activities in controlling legislative and executive powers, which in all countries studied are based on the principles of the rule of law and the separation of powers. All courts are separate bodies with special status in terms of constitutional law and are independent of other political and judicial institutions. The range of matters within their jurisdiction is set by the constitution of the country in question but in all cases can be exercised only with the framework of procedural rules. This gives considerable significance to the question of who sets these rules and different countries have dealt with it in different ways. In some there is a special constitutional law with the same legal force as the constitution itself (Croatia), the majority of countries allow for regulation by an ordinary law, Macedonia gives the court the autonomy to create and change its own rules of procedure, while in Hungary the parliament fixes the rules on procedure at the suggestion of the constitutional court. The question of the appointment of constitutional judges was also considered and of the mechanisms for ensuring their impartiality and immunity. In the area of the courts' scope for providing normative control, considerable differences were found between the different countries. In some cases the courts' jurisdiction is limited to the normative acts of the respective parliaments, and there is generally no provision for challenging unconstitutional omissions by legislation and the executive. There are, however, some situations in which they may indirectly evaluate the constitutionality of legislative omissions, as when the constitution contains provision for a time limit on enacting legislation, when the parliament has made an omission in drafting a law which violates the constitutional provisions, or when a law grants favours to certain groups while excluding others, thereby violating the equal protection clause of the constitution. The control of constitutionality of normative acts can be either preventive or repressive, depending on whether it is implemented before or after the promulgation of the law or other enactment being challenged. In most countries in the region the constitutional courts provide only repressive control, although in Hungary and Poland the courts are competent to perform both preventive and repressive norm control, while in Romania the court's jurisdiction is limited to preventive norm control. Most countries are wary of vesting constitutional courts with preventive norm control because of the danger of their becoming too involved in the day-to-day political debate, but Mr. Cvetkovski points out certain advantages of such control. If combined with a short time limit it can provide early clarification of a constitutional issue, secondly it avoids the problems arising if a law that has been in force for some years is declared to be unconstitutional, and thirdly it may help preserve the prestige of the legislation. Its disadvantages include the difficulty of ascertaining the actual and potential consequences of a norm without the empirical experience of the administration and enforcement of the law, the desirability of a certain distance from the day-to-day arguments surrounding the political process of legislation, the possible effects of changing social and economic conditions, and the danger of placing obstacles in the way of rapid reactions to acute situations. In the case of repressive norm control, this can be either abstract or concrete. The former is initiated by the supreme state organs in order to protect abstract constitutional order and the latter is initiated by ordinary courts, administrative authorities or by individuals. Constitutional courts cannot directly oblige the legislature and executive to pass a new law and this remains a matter of legislative and executive political responsibility. In the case of Poland, the parliament even has the power to dismiss a constitutional court decision by a special majority of votes, which means that the last word lies with the legislature. As the current constitutions of Central and Eastern European countries are newly adopted and differ significantly from the previous ones, the courts' interpretative functions should ensure a degree of unification in the application of the constitution. Some countries (Bulgaria, Hungary, Poland, Slovakia and Russia) provide for the constitutional courts' decisions to have a binding role on the constitutions. While their decisions inevitably have an influence on the actions of public bodies, they do not set criteria for political behaviour, which depends rather on the overall political culture and traditions of the society. All constitutions except that of Belarus, provide for the courts to have jurisdiction over conflicts arising from the distribution of responsibilities between different organs and levels in the country, as well for impeachment procedures against the head of state, and for determining the constitutionality of political parties (except in Belarus, Hungary, Russia and Slovakia). All the constitutions studied guarantee individual rights and freedoms and most courts have jurisdiction over complaints of violation of these rights by the constitution. All courts also have some jurisdiction over international agreements and treaties, either directly (Belarus, Bulgaria and Hungary) before the treaty is ratified, or indirectly (Croatia, Czech Republic, Macedonia, Romania, Russia and Yugoslavia). In each country the question of who may initiate proceedings of norm control is of central importance and is usually regulated by the constitution itself. There are three main possibilities: statutory organs, normal courts and private individuals and the limitations on each of these is discussed in the report. Most courts are limited in their rights to institute ex officio a full-scale review of a point of law, and such rights as they do have rarely been used. In most countries courts' decisions do not have any binding force but must be approved by parliament or impose on parliament the obligation to bring the relevant law into conformity within a certain period. As a result, the courts' position is generally weaker than in other countries in Europe, with parliament remaining the supreme body. In the case of preventive norm control a finding of unconstitutionality may act to suspend the law and or to refer it back to the legislature, where in countries such as Romania it may even be overturned by a two-thirds majority. In repressive norm control a finding of unconstitutionality generally serves to take the relevant law out of legal force from the day of publication of the decision or from another date fixed by the court. If the law is annulled retrospectively this may or may not bring decisions of criminal courts under review, depending on the provisions laid down in the relevant constitution. In cases relating to conflicts of competencies the courts' decisions tend to be declaratory and so have a binding effect inter partes. In the case of a review of an individual act, decisions generally become effective primarily inter partes but is the individual act has been based on an unconstitutional generally binding normative act of the legislature or executive, the findings has quasi-legal effect as it automatically initiates special proceedings in which the law or other regulation is to be annulled or abrogated with effect erga omnes. This wards off further application of the law and thus further violations of individual constitutional rights, but also discourages further constitutional complaints against the same law. Thus the success of one individual's complaint extends to everyone else whose rights have equally been or might have been violated by the respective law. As the body whose act is repealed is obliged to adopt another act and in doing so is bound by the legal position of the constitutional court on the violation of constitutionally guaranteed freedoms and rights of the complainant, in this situation the decision of the constitutional court has the force of a precedent.

Separation of Ownership from Control and Discretionary Managerial Behaviour in a Transition Economy

This study was the final stage of a four-year study of managerial behaviour and company performance in Bulgaria and examined the influence of changing ownership and control structures of companies on managerial behaviour and initiative. It provides a theoretical summary of the specific types of ownership, control, governance structures and managerial strategies in the Bulgarian transitional economy during 1992-1996. It combines two theoretical approaches, the property-rights approach to show concentrated property-rights structure and private and majority types of control as determinants of efficient enterprise risk bearing and constrained managerial discretion, and the agency theory approach to reveal the efficient role of direct non-market governance mechanisms over managers. Mr. Peev also used empirical information collected from the Central Statistical office in Bulgaria, three different enterprise investigations of corporatised state-owned enterprises between 1992 and 1994, and his own data base of privatised and private de novo industrial companies in 1996-1996. The project gives a detailed description of the main property-rights structures in Bulgaria at the present time and of the various control structures related to these. It found that there is a strong owner type of control in private and privatised firms, although, contrary to expectations, 100% state -owned enterprises tended to be characterised by a separation of ownership from control, leaving scope for managerial discretion. Mr. Peev predicts that after the forthcoming mass privatisation, many companies will acquire a dispersed ownership structure and there will be a greater separation of ownership from control and potential or inefficient managerial behaviour. The next aspect considered in detail was governance structures and the influence of the generally unstable macroeconomic environment in the country during the period in question. In examining managerial strategies, Mr. Peev divided the years since 1990 into 3 periods. Even in the first period (1990-1992) there were some signs of a more efficient role for managers and between 1992 and 1994 the picture of control structures and different managerial behaviour in state-owned companies became more diversified. Managerial strategies identified included managerial initiatives for privatisation, where managers took initiative in resolving problems of property rights and introducing restructuring measures and privatisation proposals, managerial initiatives for restructuring without privatisation, and passive adjustment and passive management, where managers seek outside services for marketing, finance management, etc. in order to adjust to the new environment. During 1995-1996 some similarities and differences between the managerial behaviour of privatised and state-owned firms emerged. Firstly, the former have undergone many changes in investment and technology, while managers of state-owned companies have changed little in this field, indicating that the private property-rights structure is more efficient for the long-term adaptation of enterprises. In the area of strategies relating to product quality, marketing, and pricing policy there was little difference between managers of private, privatised and state-owned firms. The most passive managerial behaviour was found in non-incorporated state-owned firms, although these have only an insignificant stake in the economy.

Financial analysis of various strategies for the control of Neospora caninum in dairy cattle in Switzerland

The present study was conducted to estimate the direct losses due to Neospora caninum in Swiss dairy cattle and to assess the costs and benefits of different potential control strategies. A Monte Carlo simulation spreadsheet module was developed to estimate the direct costs caused by N. caninum, with and without control strategies, and to estimate the costs of these control strategies in a financial analysis. The control strategies considered were "testing and culling of seropositive female cattle", "discontinued breeding with offspring from seropositive cows", "chemotherapeutical treatment of female offspring" and "vaccination of all female cattle". Each parameter in the module that was considered to be uncertain, was described using probability distributions. The simulations were run with 20,000 iterations over a time period of 25 years. The median annual losses due to N. caninum in the Swiss dairy cow population were estimated to be euro 9.7 million euros. All control strategies that required yearly serological testing of all cattle in the population produced high costs and thus were not financially profitable. Among the other control strategies, two showed benefit-cost ratios (BCR) >1 and positive net present values (NPV): "Discontinued breeding with offspring from seropositive cows" (BCR=1.29, NPV=25 million euros ) and "chemotherapeutical treatment of all female offspring" (BCR=2.95, NPV=59 million euros). In economic terms, the best control strategy currently available would therefore be "discontinued breeding with offspring from seropositive cows".