Three dimensional study to quantify the relationship between facial hard and soft tissue movement as a result of orthognathic surgery

Introduction Prediction of soft tissue changes following orthognathic surgery has been frequently attempted in the past decades. It has gradually progressed from the classic “cut and paste” of photographs to the computer assisted 2D surgical prediction planning; and finally, comprehensive 3D surgical planning was introduced to help surgeons and patients to decide on the magnitude and direction of surgical movements as well as the type of surgery to be considered for the correction of facial dysmorphology. A wealth of experience was gained and numerous published literature is available which has augmented the knowledge of facial soft tissue behaviour and helped to improve the ability to closely simulate facial changes following orthognathic surgery. This was particularly noticed following the introduction of the three dimensional imaging into the medical research and clinical applications. Several approaches have been considered to mathematically predict soft tissue changes in three dimensions, following orthognathic surgery. The most common are the Finite element model and Mass tensor Model. These were developed into software packages which are currently used in clinical practice. In general, these methods produce an acceptable level of prediction accuracy of soft tissue changes following orthognathic surgery. Studies, however, have shown a limited prediction accuracy at specific regions of the face, in particular the areas around the lips. Aims The aim of this project is to conduct a comprehensive assessment of hard and soft tissue changes following orthognathic surgery and introduce a new method for prediction of facial soft tissue changes.   Methodology The study was carried out on the pre- and post-operative CBCT images of 100 patients who received their orthognathic surgery treatment at Glasgow dental hospital and school, Glasgow, UK. Three groups of patients were included in the analysis; patients who underwent Le Fort I maxillary advancement surgery; bilateral sagittal split mandibular advancement surgery or bimaxillary advancement surgery. A generic facial mesh was used to standardise the information obtained from individual patient’s facial image and Principal component analysis (PCA) was applied to interpolate the correlations between the skeletal surgical displacement and the resultant soft tissue changes. The identified relationship between hard tissue and soft tissue was then applied on a new set of preoperative 3D facial images and the predicted results were compared to the actual surgical changes measured from their post-operative 3D facial images. A set of validation studies was conducted. To include: • Comparison between voxel based registration and surface registration to analyse changes following orthognathic surgery. The results showed there was no statistically significant difference between the two methods. Voxel based registration, however, showed more reliability as it preserved the link between the soft tissue and skeletal structures of the face during the image registration process. Accordingly, voxel based registration was the method of choice for superimposition of the pre- and post-operative images. The result of this study was published in a refereed journal. • Direct DICOM slice landmarking; a novel technique to quantify the direction and magnitude of skeletal surgical movements. This method represents a new approach to quantify maxillary and mandibular surgical displacement in three dimensions. The technique includes measuring the distance of corresponding landmarks digitized directly on DICOM image slices in relation to three dimensional reference planes. The accuracy of the measurements was assessed against a set of “gold standard” measurements extracted from simulated model surgery. The results confirmed the accuracy of the method within 0.34mm. Therefore, the method was applied in this study. The results of this validation were published in a peer refereed journal. • The use of a generic mesh to assess soft tissue changes using stereophotogrammetry. The generic facial mesh played a major role in the soft tissue dense correspondence analysis. The conformed generic mesh represented the geometrical information of the individual’s facial mesh on which it was conformed (elastically deformed). Therefore, the accuracy of generic mesh conformation is essential to guarantee an accurate replica of the individual facial characteristics. The results showed an acceptable overall mean error of the conformation of generic mesh 1 mm. The results of this study were accepted for publication in peer refereed scientific journal. Skeletal tissue analysis was performed using the validated “Direct DICOM slices landmarking method” while soft tissue analysis was performed using Dense correspondence analysis. The analysis of soft tissue was novel and produced a comprehensive description of facial changes in response to orthognathic surgery. The results were accepted for publication in a refereed scientific Journal. The main soft tissue changes associated with Le Fort I were advancement at the midface region combined with widening of the paranasal, upper lip and nostrils. Minor changes were noticed at the tip of the nose and oral commissures. The main soft tissue changes associated with mandibular advancement surgery were advancement and downward displacement of the chin and lower lip regions, limited widening of the lower lip and slight reversion of the lower lip vermilion combined with minimal backward displacement of the upper lip were recorded. Minimal changes were observed on the oral commissures. The main soft tissue changes associated with bimaxillary advancement surgery were generalized advancement of the middle and lower thirds of the face combined with widening of the paranasal, upper lip and nostrils regions. In Le Fort I cases, the correlation between the changes of the facial soft tissue and the skeletal surgical movements was assessed using PCA. A statistical method known as ’Leave one out cross validation’ was applied on the 30 cases which had Le Fort I osteotomy surgical procedure to effectively utilize the data for the prediction algorithm. The prediction accuracy of soft tissue changes showed a mean error ranging between (0.0006mm±0.582) at the nose region to (-0.0316mm±2.1996) at the various facial regions.

Core-level photoemission investigations of the CDTE(100) and INSB(100) surface and interfacial structures

Photoemission techniques, utilizing a synchrotron light source, were used to analyze the clean (100) surfaces of the zinc-blende semiconductor materials CdTe and InSb. Several interfacial systems involving the surfaces of these materials were also studied, including the CdTe(lOO)-Ag interface, the CdTe(lOO)-Sb system, and the InSb(lOO)-Sn interface. High-energy electron diffraction was also employed to acquire information about of surface structure. A one-domain (2xl) structure was observed for the CdTe(lOO) surface. Analysis of photoemission spectra of the Cd 4d core level for this surface structure revealed two components resulting from Cd surface atoms. The total intensity of these components accounts for a full monolayer of Cd atoms on the surface. A structural model is discussed commensurate with these results. Photoemission spectra of the Cd and Te 4d core levels indicate that Ag or Sb deposited on the CdTe(l00)-(2xl) surface at room temperature do not bound strongly to the surface Cd atoms. The room temperature growth characteristics for these two elements on the CdTe(lOO)-(2xl) are discussed. The growth at elevated substrate temperatures was also studied for Sb deposition. The InSb(lOO) surface differed from the CdTe(lOO) surface. Using molecular beam epitaxy, several structures could be generated for the InSb(lOO) surface, including a c(8x2), a c(4x4), an asymmetric (lx3), a symmetric (lx3), and a (lxl). Analysis of photoemission intensities and line shapes indicates that the c(4x4) surface is terminated with 1-3/4 monolayers of Sb atoms. The c(8x2) surface is found to be terminated with 3/4 monolayer of In atoms. Structural models for both of these surfaces are proposed based upon the photoemission results and upon models of the similar GaAs(lOO) structures. The room temperature growth characteristics of grey Sn on the lnSb(lOO)-c(4x4) and InSb(l00)-c(8x2) surfaces were studied with photoemission. The discontinuity in the valence band maximum for this semiconductor heterojunction system is measured to be 0.40 eV, independent of the starting surface structure and stoichiometry. This result is reconciled with theoretical predictions for heterostructure behavior.

Accidental SUSY: Enhanced bulk supersymmetry from brane back-reaction

We compute how bulk loops renormalize both bulk and brane effective interactions for codimension-two branes in 6D gauged chiral supergravity, as functions of the brane tension and brane-localized flux. We do so by explicitly integrating out hyper- and gauge-multiplets in 6D gauged chiral supergravity compactified to 4D on a flux-stabilized 2D rugby-ball geometry, specializing the results of a companion paper, arXiv:1210.3753 , to the supersymmetric case. While the brane back-reaction generically breaks supersymmetry, we show that the bulk supersymmetry can be preserved if the amount of brane- localized flux is related in a specific BPS-like way to the brane tension, and verify that the loop corrections to the brane curvature vanish in this special case. In these systems it is the brane-bulk couplings that fix the size of the extra dimensions, and we show that in some circumstances the bulk geometry dynamically adjusts to ensure the supersymmetric BPS-like condition is automatically satisfied. We investigate the robustness of this residual supersymmetry to loops of non-supersymmetric matter on the branes, and show that supersymmetry- breaking effects can enter only through effective brane-bulk interactions involving at least two derivatives. We comment on the relevance of this calculation to proposed applications of codimension-two 6D models to solutions of the hierarchy and cosmological constant problems. © 2013 SISSA.

A dyadic perspective on genito-pelvic pain : trauma antecedents and treatment effectiveness

La vestibulodynie provoquée (VP) est la forme la plus répandue de douleur génito-pelvienne/trouble de la pénétration et la cause la plus fréquente de douleur vaginale chez les femmes pré-ménopausées. Les femmes qui en souffrent rapportent plus de détresse psychologique ainsi qu’un fonctionnement sexuel appauvri, une diminution de la fréquence des activités sexuelles et du plaisir, et plus d’attitudes négatives à l’égard de la sexualité. Les recherches portant sur les couples souffrant de VP ont montré le rôle prépondérant des variables relationnelles dans la modulation des conséquences sexuelles et psychologiques pour les femmes et leurs partenaires. Cependant, aucune analyse dyadique n’a été appliquée au facteur de risque étiologique le plus robuste, soit la maltraitance durant l’enfance. Par ailleurs, malgré des recommandations répétées pour inclure le partenaire dans le traitement psychologique pour la VP, aucune étude à ce jour n’a examiné l’efficacité d’une psychothérapie qui inclut systématiquement le partenaire et dont la cible est le couple. L’objectif général de cette thèse a été d’utiliser une perspective dyadique afin d’examiner les antécédents de maltraitance et l’efficacité d’une intervention conçue pour améliorer les issues des couples souffrant de VP. Le premier article vise à examiner les liens entre la maltraitance durant l’enfance des femmes souffrant de VP et leurs partenaires, et leur fonctionnement sexuel, leur ajustement psychologique, leur satisfaction conjugale et enfin avec la douleur rapportée par les femmes durant les relations sexuelles. Quarante-neuf couples souffrant de VP ont complété des questionnaires auto-rapportés. La maltraitance durant l’enfance chez les femmes était associée à un fonctionnement sexuel plus faible chez les femmes et les hommes, une augmentation de l’anxiété chez les femmes seulement, et une douleur affective accrue durant les relations sexuelles. La maltraitance durant l’enfance chez les hommes était associée à un fonctionnement sexuel plus faible, moins de satisfaction conjugale, plus d’anxiété chez les femmes et les hommes, et une douleur affective accrue durant les relations sexuelles rapportée par les femmes. En se basant sur les recommandations issues des études empiriques, une thérapie cognitive et comportementale pour les couples (TCCC) souffrant de VP a été développée. Le deuxième article présente les résultats d’une étude pilote testant son efficacité, fidélité et faisabilité potentielles. Neuf couples ont complété des questionnaires auto-rapportés pré- et post-traitement. La TCCC de 12 rencontres était manualisée. Les femmes ont rapporté une amélioration significative de la douleur, du fonctionnement et de la satisfaction sexuels, et les partenaires ont rapporté une amélioration significative de leur satisfaction sexuelle. Les couples ont rapporté des niveaux élevés de satisfaction quant à la psychothérapie, et les psychothérapeutes ont rapporté suivre le manuel de traitement de manière fidèle. Le troisième article, s’appuyant sur les résultats prometteurs de l’étude pilote, décrit le protocole de recherche pour un essai clinique randomisé mesurant l’efficacité de la TCCC comparée à une intervention médicale de première ligne, la lidocaïne topique, pour le traitement de la VP. Enfin, les implications cliniques et théoriques de la thèse sont discutées.

O uso do BIM na fiscalização de obras públicas

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Incidence and classification of bifid mandibular canals using cone beam computed tomography

Aim: To determine the prevalence and classification of bifid mandibular canals using cone beam computed tomography (CBCT). Methods: The sample comprised 300 CBCT scans obtained from the Radiology and Imaging Department database at São Leopoldo Mandic Dental School, Campinas, SP, Brazil. All images were performed on Classic I-Cat® CBCT scanner, with standardized voxel at 0.25 mm and 13 cm FOV (field of view). From an axial slice (0.25 mm) a guiding plane was drawn along the alveolar ridge in order to obtain a cross-section. Results: Among 300 patients, 188 (62.7%) were female and 112 (37.3%) were male, aged between 13 to 87 years. Changes in the mandibular canal were observed in 90 patients, 30.0% of the sample, 51 women (56.7%) and 39 men (43.3%). Regarding affected sides, 32.2% were on the right and 24.5% on the left, with 43.3% bilateral cases. Conclusions: According to the results obtained in this study, a prevalence of 30% of bifid mandibular canals was found, with the most prevalent types classified as B (mesial direction) and bilateral.

Análise da trajetória de poços horizontais em reservatório de óleo pesado

The application of thermal methods, to increase the recovery of heavy oil in mature fields through drainage with multilateral and horizontal wells, has been thoroughly studied, theorically, experimentally, testing new tools and methods. The continuous injection of steam, through a steam injector well and a horizontal producer well in order to improve horizontal sweep of the fluid reservoir, it is an efficient method. Starting from an heterogeneous model, geologically characterized, modeling geostatistics, set history and identification of the best path of permeability, with seismic 3D, has been dubbed a studying model. It was studied horizontal wells in various directions in relation to the steam and the channel of higher permeability, in eight different depths. Into in the same area were studied, the sensitivity of the trajectories of horizontal wells, according to the depth of navigation. With the purpose of obtaining the highest output of oil to a particular flow, quality, temperature and time for the injection of steam. The wells studied showed a significant improvement in the cumulative oil recovery in one of the paths by promoting an alternative to application in mature fields or under development fields with heavy oil

Effects of photoperiod on reproduction of Siamese fighting fish Betta splendens

This study investigated the effect of different photoperiods (24 h of light (L):0 h of darkness (D); 20L:4D; 16L:8D; 12L:12D; and 8L:16D) on the reproduction and growth of Betta splendens. The results showed that spawning frequency was significantly higher in couples reared under 16L:8D and 12L:12D, in comparison with other treatments. The highest number of eggs per spawn was obtained under 16L:8D (544.76±375.23) and 12L:12D (471.13±261.52), and the lowest values were detected for 24L:0D (128.55±58.14) and 20L:4D (187.87±103.84). Fertility and fecundity also showed significantly higher average values in 16L:8D and 12L:12D when compared with 24L:0D and 20L:4D treatments. Egg volume and perivitelline space were significantly higher in 24L:0D treatments that showed the lowest numbers of eggs per spawn, while the vitelline volume did not show significant differences. Other variables such as breeders weight gain and condition factor (K) were not statistically different. Moreover, the final length varies according to photoperiod and gender. These results demonstrated a key role for the photoperiod upon B. splendens reproduction. The best reproductive performance is achieved under the photoperiods that best approached those that occur in spring and summer (16L:8D and 12L:12D), coinciding with their best seasons for reproduction.

Reciclagem seletiva de canais radiculares

Introdução: O presente trabalho introduz um novo tema na área da Endodontia: Reciclagem Seletiva de Canais Radiculares. Tem os mesmos princípios de desinfecção, conformação e obturação que o retratamento endodôntico não cirúrgico convencional, no entanto é menos invasivo. Está indicado em casos de insucesso prévio no tratamento endodôntico e na presença de próteses. Objetivos: Esta dissertação tem como objectivo principal apresentar um possível novo tratamento na área da Endodontia. Procedeu-se a uma revisão bibliográfica, analisando a literatura que versa o tema, de modo a introduzi-lo dentro da área do retratamento endodôntico não cirúrgico nos seus diferentes procedimentos: Desobturação e materiais utilizados, instrumental utilizado, irrigantes e a sua utilidade e aplicabilidade na prática clínica. Materiais e Métodos: Para a elaboração da presente dissertação, foi realizada uma pesquisa bibliográfica, no presente ano, recorrendo-se aos motores de pesquisa on-line: b-On, Pubmed, Scielo e Google Académico, realizando a pesquisa através das palavras-chave: “endodontic retreatment”, ”root canal system”, “endodontic irrigation”, “endodontic solvent”, “pro-taper”, “reciproc”, “clorohexidine”, “sodium hipoclorite”, “obturation” que foram então combinadas entre si de múltiplas e sucessivas formas. Foram utilizados 50 artigos dos 87 seleccionados, um livro e uma revista. Discussão: Na literatura científica, são comparados vários materiais para a realização do retratamento endodôntico não cirúrgico, como solvente o que melhores resultados apresenta na dissolução da Gutta-Percha é o Xilitol seguido do clorofórmio. Como solução irrigante a Clorohexidina tem um grande potencial nos casos de retratamento por ser mais eficaz em bactérias Gram+ e pela sua substantividade que permite que a sua actividade bacteriana seja contínua. O sistema Reciproc® pela sua forma em S no corte transversal e possuir dois bordos cortantes, aliados à sua composição pela nova liga M-Wire, mais resistente à torção e fadiga cíclica parece ser a melhor opção tanto para desobturação do SCR como re-instrumentação. Com a imagiologia tridimensional, a Reciclagem Selectiva de Canais Radiculares pode ser explorada e tornar-se uma técnica mais conservadora em casos de retratamento ao conseguir-se determinar qual a raiz com lesão apical. Conclusão: Perante este novo método mais conservador de realizar o retratamento endodôntico não cirúrgico, o exame radiológico por CBCT é o grande responsável pela sua realização. Com ele podemos ter acesso à tridimensionalidade de todas as estruturas orais e consequentemente atingir um diagnóstico correcto, com mais informação disponível. Este novo método, aliado aos melhores materiais utilizados no RTENC convencional poderão permitir ao clínico a realização de um retratamento não cirúrgico seguro, mais conservador para a estrutura dentária e para potenciais próteses que possam estar presentes. São necessários mais estudos com um follow-up mais prolongado para determinar a real efetividade deste tratamento.

First reproductive and productive results on “Ribatejano pig”

The present trail aimed to study the effect of crossbreeding between Alentejano (AL) and Bísaro (BI) swine breeds (“Ribatejano pig”) on some reproductive and productive traits. Nine AL gilts and sows and six BI gilts were crossed with BI and AL boars, respectively. Mating and farrowing dates, prolificacy and litter size at 28d were registered for all sows. The pregnancy length of AL sows was shorter (111±0.4d vs 113.7±0.5d; p=0.002) than the observed on BI females. The BI gilts presented higher prolificacy rate than AL on both total born (11.0±1.0 vs 6.7±0.8; P=0.004) and born alive piglets (10.0±1.0 vs 6.7±0.8; p=0.026). The mortality rate was similar in both genotypes (p=0.255) being on average 12%, therefore at 28d after farrowing the litter size remained higher in BI sows (8.5±0.8 vs 6.1±0.6; p= 0.032). A subset of each genotype (4 gilts) was supervised during farrowing and lactation (until 28d) and piglets were weighed at birth, 24h and 28d of live. Farrowing length was not significantly different (p=0.253) between genotypes, averaging 97±22 min. When compared to ALBI (AL x BI) piglets, the BIAL (BI x AL) piglets were heavier at birth (1402±46g vs 1209±36g; p=0.002). Colostrum intake of piglets per kg of birth weight on the first 24h of life was similar between genotypes (p=0.735) being 289±15g for ALBI and 281±19g for BIAL piglets. The growth rate of piglets from birth to 28d and piglet weight at 28d was not different between genotypes (p=0.161 and p=0.091) averaging 195±6g and 6761±181g, respectively. Litter weight at 28d tended (P=0.06) to be higher on ALBI litters (56.6±4.0kg) than BIAL litters (43.2±4.0kg). This results obtained within the frame of Treasure project* are, at our knowledge, the first data of these crossbred piglets and could be used in future as reference for further studies and also for farmers that may try these cross on a commercial basis.