Nucleation and growth of metamorphic minerals in contact aureoles

THESIS ABSTRACT Nucleation and growth of metamorphic minerals are the consequence of changing P-T-X-conditions. The thesis presented here focuses on processes governing nucleation and growth of minerals in contact metamorphic environments using a combination of geochemical analytics (chemical-, isotope-, and trace element composition), statistical treatments of spatial data, and numerical models. It is shown, that a combination of textural modeling and stable isotope analysis allows a distinction between several possible reaction paths for olivine growth in a siliceous dolomite contact aureole. It is suggested that olivine forms directly from dolomite and quartz. The formation of olivine from this metastable reaction implies metamorphic crystallization far from equilibrium. As a major consequence, the spatial distribution of metamorphic mineral assemblages in a contact aureole cannot be interpreted as a proxy for the temporal evolution of a single rock specimen, because each rock undergoes a different reaction path, depending on temperature, heating rate, and fluid-infiltration rate. A detailed calcite-dolomite thermometry study was initiated on multiple scales ranging from aureole scale to the size of individual crystals. Quantitative forward models were developed to evaluate the effect of growth zoning, volume diffusion and the formation of submicroscopic exsolution lamellae (<1 µm) on the measured Mg-distribution in individual calcite crystals and compare the modeling results to field data. This study concludes that Mg-distributions in calcite grains of the Ubehebe Peak contact aureole are the consequence of rapid crystal growth in combination with diffusion and exsolution. The crystallization history of a rock is recorded in the chemical composition, the size and the distribution of its minerals. Near the Cima Uzza summit, located in the southern Adamello massif (Italy), contact metamorphic brucite bearing dolomite marbles are exposed as xenoliths surrounded by mafic intrusive rocks. Brucite is formed retrograde pseudomorphing spherical periclase crystals. Crystal size distributions (CSD's) of brucite pseudomorphs are presented for two profiles and combined with geochemistry data and petrological information. Textural analyses are combined with geochemistry data in a qualitative model that describes the formation periclase. As a major outcome, this expands the potential use of CSD's to systems of mineral formation driven by fluid-infiltration. RESUME DE LA THESE La nucléation et la croissance des minéraux métamorphiques sont la conséquence de changements des conditions de pression, température et composition chimique du système (PT-X). Cette thèse s'intéresse aux processus gouvernant la nucléation et la croissance des minéraux au cours d'un épisode de métamorphisme de contact, en utilisant la géochimie analytique (composition chimique, isotopique et en éléments traces), le traitement statistique des données spatiales et la modélisation numérique. Il est montré que la combinaison d'un modèle textural avec des analyses en isotopes stables permet de distinguer plusieurs chemins de réactions possibles conduisant à la croissance de l'olivine dans une auréole de contact riche en Silice et dolomite. Il est suggéré que l'olivine se forme directement à partir de la dolomie et du quartz. Cette réaction métastable de formation de l'olivine implique une cristallisation métamorphique loin de l'équilibre. La principale conséquence est que la distribution spatiale des assemblages de minéraux métamorphiques dans une auréole de contact ne peut pas être considérée comme un témoin de l'évolution temporelle d'un type de roche donné, puisque chaque type de roche suit différents chemins de réactions, en fonction de la température, la vitesse de réchauffement et le taux d'infiltration du fluide. Une étude thermométrique calcite-dolomite détaillée a été réalisée à diverses échelles, depuis l'échelle de l'auréole de contact jusqu'à l'échelle du cristal. Des modèles numériques quantitatifs ont été développés pour évaluer l'effet des zonations de croissance, de la diffusion volumique et de la formation de lamelles d'exsolution submicroscopiques (<1µm) sur la distribution du magnésium mesuré dans des cristaux de calcite individuels. Les résultats de ce modèle ont été comparés ä des échantillons naturels. Cette étude montre que la distribution du Mg dans les grains de calcite de l'auréole de contact de l'Ubehebe Peak (USA) résulte d'une croissance cristalline rapide, associée aux processus de diffusion et d'exsolution. L'histoire de cristallisation d'une roche est enregistrée dans la composition chimique, la taille et la distribution de ses minéraux. Près du sommet Cima Uzza situé au sud du massif d'Adamello (Italie), des marbres dolomitiques à brucite du métamorphisme de contact forment des xénolithes dans une intrusion mafique. La brucite constitue des pseudomorphes rétrogrades du périclase. Les distributions de taille des cristaux (CSD) des pseudomorphes de brucite sont présentées pour deux profiles et sont combinées aux données géochimiques et pétrologiques. Les analyses textorales sont combinées aux données géochimiques dans un modèle qualitatif qui décrit la formation du périclase. Ceci élargit l'utilisation potentielle de la C5D aux systèmes de formation de minéraux controlés par les infiltrations fluides. THESIS ABSTRACT (GENERAL PUBLIC) Rock textures are essentially the result of a complex interaction of nucleation, growth and deformation as a function of changing physical conditions such as pressure and temperature. Igneous and metamorphic textures are especially attractive to study the different mechanisms of texture formation since most of the parameters like pressure-temperature-paths are quite well known for a variety of geological settings. The fact that textures are supposed to record the crystallization history of a rock traditionally allowed them to be used for geothermobarometry or dating. During the last decades the focus of metamorphic petrology changed from a static point of view, i.e. the representation of a texture as one single point in the petrogenetic grid towards a more dynamic view, where multiple metamorphic processes govern the texture formation, including non-equilibrium processes. This thesis tries to advance our understanding on the processes governing nucleation and growth of minerals in contact metamorphic environments and their dynamic interplay by using a combination of geochemical analyses (chemical-, isotope-, and trace element composition), statistical treatments of spatial data and numerical models. In a first part the thesis describes the formation of metamorphic olivine porphyroblast in the Ubehebe Peak contact aureole (USA). It is shown that not the commonly assumed succession of equilibrium reactions along a T-t-path formed the textures present in the rocks today, but rather the presence of a meta-stable reaction is responsible for forming the olivine porphyroblast. Consequently, the spatial distribution of metamorphic minerals within a contact aureole can no longer be regarded as a proxy for the temporal evolution of a single rock sample. Metamorphic peak temperatures for samples of the Ubehebe Peak contact aureole were determined using calcite-dolomite. This geothermometer is based on the temperature-dependent exchange of Mg between calcite and dolomite. The purpose of the second part of this thesis was to explain the interfering systematic scatter of measured Mg-content on different scales and thus to clarify the interpretation of metamorphic temperatures recorded in carbonates. Numerical quantitative forward models are used to evaluate the effect of several processes on the distribution of magnesium in individual calcite crystals and the modeling results were then compared to measured field. Information about the crystallization history is not only recorded in the chemical composition of grains, like isotope composition or mineral zoning. Crystal size distributions (CSD's) provide essential information about the complex interaction of nucleation and growth of minerals. CSD's of brucite pseudomorphs formed retrograde after periclase of the southern Adamello massif (Italy) are presented. A combination of the textural 3D-information with geochemistry data is then used to evaluate reaction kinetics and to constrain the actual reaction mechanism for the formation of periclase. The reaction is shown to be the consequence of the infiltration of a limited amount of a fluid phase at high temperatures. The composition of this fluid phase is in large disequilibrium with the rest of the rock resulting in very fast reaction rates. RESUME DE LA THESE POUR LE GRAND PUBLIC: La texture d'une roche résulte de l'interaction complexe entre les processus de nucléation, croissance et déformation, en fonction des variations de conditions physiques telles que la pression et la température. Les textures ignées et métamorphiques présentent un intérêt particulier pour l'étude des différents mécanismes à l'origine de ces textures, puisque la plupart des paramètres comme les chemin pression-température sont relativement bien contraints dans la plupart des environnements géologiques. Le fait que les textures soient supposées enregistrer l'histoire de cristallisation des roches permet leur utilisation pour la datation et la géothermobarométrie. Durant les dernières décennies, la recherche en pétrologie métamorphique a évolué depuis une visualisation statique, c'est-à-dire qu'une texture donnée correspondait à un point unique de la grille pétrogénétique, jusqu'à une visualisation plus dynamique, où les multiples processus métamorphiques qui gouvernent 1a formation d'une texture incluent des processus hors équilibre. Cette thèse a pour but d'améliorer les connaissances actuelles sur les processus gouvernant la nucléation et la croissance des minéraux lors d'épisodes de métamorphisme de contact et l'interaction dynamique existant entre nucléation et croissance. Pour cela, les analyses géochimiques (compositions chimiques en éléments majeurs et traces et composition isotopique), le traitement statistique des données spatiales et la modélisation numérique ont été combinés. Dans la première partie, cette thèse décrit la formation de porphyroblastes d'olivine métamorphique dans l'auréole de contact de l'Ubehebe Peak (USA). Il est montré que la succession généralement admise des réactions d'équilibre le long d'un chemin T-t ne peut pas expliquer les textures présentes dans les roches aujourd'hui. Cette thèse montre qu'il s'agirait plutôt d'une réaction métastable qui soit responsable de la formation des porphyroblastes d'olivine. En conséquence, la distribution spatiale des minéraux métamorphiques dans l'auréole de contact ne peut plus être interprétée comme le témoin de l'évolution temporelle d'un échantillon unique de roche. Les pics de température des échantillons de l'auréole de contact de l'Ubehebe Peak ont été déterminés grâce au géothermomètre calcite-dolomite. Celui-ci est basé sur l'échange du magnésium entre la calcite et la dolomite, qui est fonction de la température. Le but de la deuxième partie de cette thèse est d'expliquer la dispersion systématique de la composition en magnésium à différentes échelles, et ainsi d'améliorer l'interprétation des températures du métamorphisme enregistrées dans les carbonates. Des modèles numériques quantitatifs ont permis d'évaluer le rôle de différents processus sur la distribution du magnésium dans des cristaux de calcite individuels. Les résultats des modèles ont été comparés aux échantillons naturels. La composition chimique des grains, comme la composition isotopique ou la zonation minérale, n'est pas le seul témoin de l'histoire de la cristallisation. La distribution de la taille des cristaux (CSD) fournit des informations essentielles sur les interactions entre nucléation et croissance des minéraux. La CSD des pseudomorphes de brucite retrograde formés après le périclase dans le sud du massif Adamello (Italie) est présentée dans la troisième partie. La combinaison entre les données textorales en trois dimensions et les données géochimiques a permis d'évaluer les cinétiques de réaction et de contraindre les mécanismes conduisant à la formation du périclase. Cette réaction est présentée comme étant la conséquence de l'infiltration d'une quantité limitée d'une phase fluide à haute température. La composition de cette phase fluide est en grand déséquilibre avec le reste de la roche, ce qui permet des cinétiques de réactions très rapides.

Audit report on the City of Center Point, Iowa for the year ended June 30, 2007

Audit report on the City of Center Point, Iowa for the year ended June 30, 2007

Audit report on the City of Strawberry Point, Iowa for the year ended June 30, 2007

Audit report on the City of Strawberry Point, Iowa for the year ended June 30, 2007

Impact of navigator timing on free-breathing submillimeter 3D coronary magnetic resonance angiography.

The purpose of this study was to investigate the impact of navigator timing on image quality in navigator-gated and real-time motion-corrected, free-breathing, three-dimensional (3D) coronary MR angiography (MRA) with submillimeter spatial image resolution. Both phantom and in vivo investigations were performed. 3D coronary MRA with real-time navigator technology was applied using variable navigator time delays (time delay between the navigator and imaging sequences) and varying spatial resolutions. Quantitative objective and subjective image quality parameters were assessed. For high-resolution imaging, reduced image quality was found as a function of increasing navigator time delay. Lower spatial resolution coronary MRA showed only minor sensitivity to navigator timing. These findings were consistent among volunteers and phantom experiments. In conclusion, for submillimeter navigator-gated and real-time motion-corrected 3D coronary MRA, shortening the time delay between the navigator and the imaging portion of the sequence becomes increasingly important for improved spatial resolution.

Special investigation of the City of Center Point Library for the period January 1, 2006 through December 6, 2007

Special investigation of the City of Center Point Library for the period January 1, 2006 through December 6, 2007

Forecasting and turning point predictions in a Bayesian panel VAR model

We provide methods for forecasting variables and predicting turning points in panel Bayesian VARs. We specify a flexible model which accounts for both interdependencies in the cross section and time variations in the parameters. Posterior distributions for the parameters are obtained for a particular type of diffuse, for Minnesota-type and for hierarchical priors. Formulas for multistep, multiunit point and average forecasts are provided. An application to the problem of forecasting the growth rate of output and of predicting turning points in the G-7 illustrates the approach. A comparison with alternative forecasting methods is also provided.

3D seismic facies characterization and geological patterns recognition (Australian North West Shelf)

EXECUTIVE SUMMARY This PhD research, funded by the Swiss Sciences Foundation, is principally devoted to enhance the recognition, the visualisation and the characterization of geobodies through innovative 3D seismic approaches. A series of case studies from the Australian North West Shelf ensures the development of reproducible integrated 3D workflows and gives new insight into local and regional stratigraphic as well as structural issues. This project was initiated in year 2000 at the Geology and Palaeontology Institute of the University of Lausanne (Switzerland). Several collaborations ensured the improvement of technical approaches as well as the assessment of geological models. - Investigations into the Timor Sea structural style were carried out at the Tectonics Special Research Centre of the University of Western Australia and in collaboration with Woodside Energy in Perth. - Seismic analysis and attributes classification approach were initiated with Schlumberger Oilfield Australia in Perth; assessments and enhancements of the integrated seismic approaches benefited from collaborations with scientists from Schlumberger Stavanger Research (Norway). Adapting and refining from "linear" exploration techniques, a conceptual "helical" 3D seismic approach has been developed. In order to investigate specific geological issues this approach, integrating seismic attributes and visualisation tools, has been refined and adjusted leading to the development of two specific workflows: - A stratigraphic workflow focused on the recognition of geobodies and the characterization of depositional systems. Additionally, it can support the modelling of the subsidence and incidentally the constraint of the hydrocarbon maturity of a given area. - A structural workflow used to quickly and accurately define major and secondary fault systems. The integration of the 3D structural interpretation results ensures the analysis of the fault networks kinematics which can affect hydrocarbon trapping mechanisms. The application of these integrated workflows brings new insight into two complex settings on the Australian North West Shelf and ensures the definition of astonishing stratigraphic and structural outcomes. The stratigraphic workflow ensures the 3D characterization of the Late Palaeozoic glacial depositional system on the Mermaid Nose (Dampier Subbasin, Northern Carnarvon Basin) that presents similarities with the glacial facies along the Neotethys margin up to Oman (chapter 3.1). A subsidence model reveals the Phanerozoic geodynamic evolution of this area (chapter 3.2) and emphasizes two distinct mode of regional extension for the Palaeozoic (Neotethys opening) and Mesozoic (abyssal plains opening). The structural workflow is used for the definition of the structural evolution of the Laminaria High area (Bonaparte Basin). Following a regional structural characterization of the Timor Sea (chapter 4.1), a thorough analysis of the Mesozoic fault architecture reveals a local rotation of the stress field and the development of reverse structures (flower structures) in extensional setting, that form potential hydrocarbon traps (chapter 4.2). The definition of the complex Neogene structural architecture associated with the fault kinematic analysis and a plate flexure model (chapter 4.3) suggest that the Miocene to Pleistocene reactivation phases recorded at the Laminaria High most probably result from the oblique normal reactivation of the underlying Mesozoic fault planes. This episode is associated with the deformation of the subducting Australian plate. Based on these results three papers were published in international journals and two additional publications will be submitted. Additionally this research led to several communications in international conferences. Although the different workflows presented in this research have been primarily developed and used for the analysis of specific stratigraphic and structural geobodies on the Australian North West Shelf, similar integrated 3D seismic approaches will have applications to hydrocarbon exploration and production phases; for instance increasing the recognition of potential source rocks, secondary migration pathways, additional traps or reservoir breaching mechanisms. The new elements brought by this research further highlight that 3D seismic data contains a tremendous amount of hidden geological information waiting to be revealed and that will undoubtedly bring new insight into depositional systems, structural evolution and geohistory of the areas reputed being explored and constrained and other yet to be constrained. The further development of 3D texture attributes highlighting specific features of the seismic signal, the integration of quantitative analysis for stratigraphic and structural processes, the automation of the interpretation workflow as well as the formal definition of "seismo-morphologic" characteristics of a wide range of geobodies from various environments would represent challenging examples of continuation of this present research. The 21st century will most probably represent a transition period between fossil and other alternative energies. The next generation of seismic interpreters prospecting for hydrocarbon will undoubtedly face new challenges mostly due to the shortage of obvious and easy targets. They will probably have to keep on integrating techniques and geological processes in order to further capitalise the seismic data for new potentials definition. Imagination and creativity will most certainly be among the most important quality required from such geoscientists.