Positional Accuracy in Smart-Phones and Its Effect on LBS Applications.

Location-based services (LBS) highly rely on the location of the mobile user in order to provide the service tailored to that location. This location is calculated differently depending on the technology available in the used mobile device. No matter which technology is used, the location will never be calculated 100% correctly; instead there will always be a margin of error generated during the calculation, which is referred to as positional accuracy. This research has reviewed the eight most common positioning technologies available in the major current smart-phones and assessed their positional accuracy with respect to its usage by LBS applications. Given the vast majority of these applications, this research classified them into thirteen categories, and these categories were also classified depending on their level criticality as low, medium, or high critical, and whether they function indoor or outdoor. The accuracies of different positioning technologies are compared to these two criteria. Low critical outdoor and high critical indoor applications were found technologically covered; high and medium critical outdoor ones weren?t fully resolved. Finally three potential solutions are suggested to be implemented in future smartphones to resolve this technological gap: Real-Time Kinematics Global Positioning System (RTK GPS), terrestrial transmitters, and combination of Wireless Sensors Network and Radio Frequency Identification (WSN-RFID).

Route-back delivery protocol for collection tree protocol-based applications

We propose the Route-back Delivery (RBD) protocol; a routing mechanism to create reverse routes exploiting the Collection Tree Protocol to allow unicast data dissemination from the sink. The main goal of this work is to provide a mechanism to enable bi-directional communications among the root(s) and specific sensor nodes in data gathering applications that does not use broadcast only mechanisms. The main objective of the root-to-remote-nodes route creation is to disseminate short messages to change application parameters in a unicast fashion. This facilitates remote configurability in heterogeneous WSN deployments.

On-the-fly dynamic reprogramming mechanism for increasing the energy efficiency and supporting multi-experimental capabilities in WSNs

Remote reprogramming capabilities are one of the major concerns in WSN platforms due to the limitations and constraints that low power wireless nodes poses, especially when energy efficiency during the reprogramming process is a critical factor for extending the battery life of the devices. Moreover, WSNs are based on low-rate protocols in which as greater the amount of data is sent, the more the possibility to lose packets during the transmitting process is. In order to overcome these limitations, in this work a novel on-the-fly reprogramming technique for modifying and updating the application running on the wireless sensor nodes is designed and implemented, based on a partial reprogramming mechanism that significantly reduces the size of the files to be downloaded to the nodes, therefore diminishing their power/time consumption. This powerful mechanism also addresses multi-experimental capabilities because it provides the possibility to download, manage, test and debug multiple applications into the wireless nodes, based on a memory map segmentation of the core. Being an on-the-fly reprogramming process, no additional resources to store and download the configuration file are needed.

A cyber-physical approach to combined HW-SW monitoring for improving energy efficiency in data centers

High-Performance Computing, Cloud computing and next-generation applications such e-Health or Smart Cities have dramatically increased the computational demand of Data Centers. The huge energy consumption, increasing levels of CO2 and the economic costs of these facilities represent a challenge for industry and researchers alike. Recent research trends propose the usage of holistic optimization techniques to jointly minimize Data Center computational and cooling costs from a multilevel perspective. This paper presents an analysis on the parameters needed to integrate the Data Center in a holistic optimization framework and leverages the usage of Cyber-Physical systems to gather workload, server and environmental data via software techniques and by deploying a non-intrusive Wireless Sensor Net- work (WSN). This solution tackles data sampling, retrieval and storage from a reconfigurable perspective, reducing the amount of data generated for optimization by a 68% without information loss, doubling the lifetime of the WSN nodes and allowing runtime energy minimization techniques in a real scenario.

Short-term effects of four tillage practices on soil physical properties, soil water potential, and maize yield

The area cultivated using conservation tillage has recently increased in central Spain. However, soil compaction and water retention with conservation tillage still remains a genuine concern for landowners in this region be- cause of its potential effect on the crop growth and yield. The aim of this research is to determine the short- term influences of four tillage treatments on soil physical properties. In the experiment, bulk density, cone index, soil water potential, soil temperature and maize (Zea mays L.) productivity have been measured. A field experiment was established in spring of 2013 on a loamy soil. The experiment compared four tillage methods (zero tillage, ZT; reservoir tillage, RT; minimum tillage, MT; and conventional tillage, CT). Soil bulk density and soil cone index were measured during maize growing season and at harvesting time. Furthermore, the soil water potential was monitored by using a wireless sensors network with sensors at 20 and 40 cm depths. Also, soil temperatures were registered at depths of 5 and 12 cm. Results indicated that there were significant differ- ences between soil bulk density and cone index of ZT method and those of RT, MT, and CT, during the growing season; although, this difference was not significant at the time of harvesting in some soil layers. Overall, in most soil layers, tillage practice affected bulk density and cone index in the order: ZT N RT N MT N CT. Regardless oftheentireobservationperiod,results exhibited that soils under ZT and RT treatments usually resulted in higher water potential and lower soil temperature than the other two treatments at both soil depths. In addition, clear differences in maize grain yield were observed between ZT and CT treatments, with a grain yield (up to 15.4%) increase with the CT treatment. On the other hand, no significant differences among (RT, MT, and CT) on maizeyieldwerefound.Inconclusion,the impact of soil compaction increase and soil temperature decrease,pro- duced by ZT treatment is a potential reason for maize yield reduction in this tillage method. We found that RT could be certainly a viable option for farmers incentral Spain,particularly when switching to conservation tillage from conventional tillage. This technique showed a moderate and positive effect on soil physical properties and increased maize yields compared to ZT and MT, and provides an opportunity to stabilize maize yields compared to CT.

A Dynamically Adaptable Image Processing Application Trading Off Between High Performance, Consumption and Dependability in Real Time

As embedded systems evolve, problems inherent to technology become important limitations. In less than ten years, chips will exceed the maximum allowed power consumption affecting performance, since, even though the resources available per chip are increasing, frequency of operation has stalled. Besides, as the level of integration is increased, it is difficult to keep defect density under control, so new fault tolerant techniques are required. In this demo work, a new dynamically adaptable virtual architecture (ARTICo3) to allow dynamic and context-aware use of resources is implemented in a high performance Wireless Sensor node (HiReCookie) to perform an image processing application.

Application of PZT and FBG impedance sensors for structural health monitoring of reinforced concrete beams strengthened with FRP composite materials

Esta Tesis tiene como objetivo principal el desarrollo de métodos de identificación del daño que sean robustos y fiables, enfocados a sistemas estructurales experimentales, fundamentalmente a las estructuras de hormigón armado reforzadas externamente con bandas fibras de polímeros reforzados (FRP). El modo de fallo de este tipo de sistema estructural es crítico, pues generalmente es debido a un despegue repentino y frágil de la banda del refuerzo FRP originado en grietas intermedias causadas por la flexión. La detección de este despegue en su fase inicial es fundamental para prevenir fallos futuros, que pueden ser catastróficos. Inicialmente, se lleva a cabo una revisión del método de la Impedancia Electro-Mecánica (EMI), de cara a exponer sus capacidades para la detección de daño. Una vez la tecnología apropiada es seleccionada, lo que incluye un analizador de impedancias así como novedosos sensores PZT para monitorización inteligente, se ha diseñado un procedimiento automático basado en los registros de impedancias de distintas estructuras de laboratorio. Basándonos en el hecho de que las mediciones de impedancias son posibles gracias a una colocación adecuada de una red de sensores PZT, la estimación de la presencia de daño se realiza analizando los resultados de distintos indicadores de daño obtenidos de la literatura. Para que este proceso sea automático y que no sean necesarios conocimientos previos sobre el método EMI para realizar un experimento, se ha diseñado e implementado un Interfaz Gráfico de Usuario, transformando la medición de impedancias en un proceso fácil e intuitivo. Se evalúa entonces el daño a través de los correspondientes índices de daño, intentando estimar no sólo su severidad, sino también su localización aproximada. El desarrollo de estos experimentos en cualquier estructura genera grandes cantidades de datos que han de ser procesados, y algunas veces los índices de daño no son suficientes para una evaluación completa de la integridad de una estructura. En la mayoría de los casos se pueden encontrar patrones de daño en los datos, pero no se tiene información a priori del estado de la estructura. En este punto, se ha hecho una importante investigación en técnicas de reconocimiento de patrones particularmente en aprendizaje no supervisado, encontrando aplicaciones interesantes en el campo de la medicina. De ahí surge una idea creativa e innovadora: detectar y seguir la evolución del daño en distintas estructuras como si se tratase de un cáncer propagándose por el cuerpo humano. En ese sentido, las lecturas de impedancias se emplean como información intrínseca de la salud de la propia estructura, de forma que se pueden aplicar las mismas técnicas que las empleadas en la investigación del cáncer. En este caso, se ha aplicado un algoritmo de clasificación jerárquica dado que ilustra además la clasificación de los datos de forma gráfica, incluyendo información cualitativa y cuantitativa sobre el daño. Se ha investigado la efectividad de este procedimiento a través de tres estructuras de laboratorio, como son una viga de aluminio, una unión atornillada de aluminio y un bloque de hormigón reforzado con FRP. La primera ayuda a mostrar la efectividad del método en sencillos escenarios de daño simple y múltiple, de forma que las conclusiones extraídas se aplican sobre los otros dos, diseñados para simular condiciones de despegue en distintas estructuras. Demostrada la efectividad del método de clasificación jerárquica de lecturas de impedancias, se aplica el procedimiento sobre las estructuras de hormigón armado reforzadas con bandas de FRP objeto de esta tesis, detectando y clasificando cada estado de daño. Finalmente, y como alternativa al anterior procedimiento, se propone un método para la monitorización continua de la interfase FRP-Hormigón, a través de una red de sensores FBG permanentemente instalados en dicha interfase. De esta forma, se obtienen medidas de deformación de la interfase en condiciones de carga continua, para ser implementadas en un modelo de optimización multiobjetivo, cuya solución se haya por medio de una expansión multiobjetivo del método Particle Swarm Optimization (PSO). La fiabilidad de este último método de detección se investiga a través de sendos ejemplos tanto numéricos como experimentales. ABSTRACT This thesis aims to develop robust and reliable damage identification methods focused on experimental structural systems, in particular Reinforced Concrete (RC) structures externally strengthened with Fiber Reinforced Polymers (FRP) strips. The failure mode of this type of structural system is critical, since it is usually due to sudden and brittle debonding of the FRP reinforcement originating from intermediate flexural cracks. Detection of the debonding in its initial stage is essential thus to prevent future failure, which might be catastrophic. Initially, a revision of the Electro-Mechanical Impedance (EMI) method is carried out, in order to expose its capabilities for local damage detection. Once the appropriate technology is selected, which includes impedance analyzer as well as novel PZT sensors for smart monitoring, an automated procedure has been design based on the impedance signatures of several lab-scale structures. On the basis that capturing impedance measurements is possible thanks to an adequately deployed PZT sensor network, the estimation of damage presence is done by analyzing the results of different damage indices obtained from the literature. In order to make this process automatic so that it is not necessary a priori knowledge of the EMI method to carry out an experimental test, a Graphical User Interface has been designed, turning the impedance measurements into an easy and intuitive procedure. Damage is then assessed through the analysis of the corresponding damage indices, trying to estimate not only the damage severity, but also its approximate location. The development of these tests on any kind of structure generates large amounts of data to be processed, and sometimes the information provided by damage indices is not enough to achieve a complete analysis of the structural health condition. In most of the cases, some damage patterns can be found in the data, but none a priori knowledge of the health condition is given for any structure. At this point, an important research on pattern recognition techniques has been carried out, particularly on unsupervised learning techniques, finding interesting applications in the medicine field. From this investigation, a creative and innovative idea arose: to detect and track the evolution of damage in different structures, as if it were a cancer propagating through a human body. In that sense, the impedance signatures are used to give intrinsic information of the health condition of the structure, so that the same clustering algorithms applied in the cancer research can be applied to the problem addressed in this dissertation. Hierarchical clustering is then applied since it also provides a graphical display of the clustered data, including quantitative and qualitative information about damage. The performance of this approach is firstly investigated using three lab-scale structures, such as a simple aluminium beam, a bolt-jointed aluminium beam and an FRP-strengthened concrete specimen. The first one shows the performance of the method on simple single and multiple damage scenarios, so that the first conclusions can be extracted and applied to the other two experimental tests, which are designed to simulate a debonding condition on different structures. Once the performance of the impedance-based hierarchical clustering method is proven to be successful, it is then applied to the structural system studied in this dissertation, the RC structures externally strengthened with FRP strips, where the debonding failure in the interface between the FRP and the concrete is successfully detected and classified, proving thus the feasibility of this method. Finally, as an alternative to the previous approach, a continuous monitoring procedure of the FRP-Concrete interface is proposed, based on an FBGsensors Network permanently deployed within that interface. In this way, strain measurements can be obtained under controlled loading conditions, and then they are used in order to implement a multi-objective model updating method solved by a multi-objective expansion of the Particle Swarm Optimization (PSO) method. The feasibility of this last proposal is investigated and successfully proven on both numerical and experimental RC beams strengthened with FRP.

Sistema de ayuda a la selección de soluciones de protección de datos personales, para los productos y servicios en “Internet de las Cosas”

Los nuevos productos y servicios de “Internet de las Cosas” nos harán más eficientes, con una mayor capacidad de actuación y una mejor comprensión de nuestro entorno. Se desarrollarán nuevas ayudas técnicas que permitirán prolongar nuestra vida activa, y muchas ventajas que hoy día nos costaría imaginar. Sin embargo coexistiremos con una gran cantidad de dispositivos que recopilarán información sobre nuestra actividad, costumbres, preferencias, etc., que podrían amenazar nuestra privacidad. La desconfianza que estos riesgos podrían generar en las personas, actuaría como una barrera que podría dificultar el pleno desarrollo de esta nueva gama de productos y servicios. Internet de las Cosas, alcanza su significado más representativo con las Ciudades Inteligentes (Smart Cities) que proporcionan las herramientas necesarias para mejorar la gestión de las ciudades modernas de una manera mucho más eficiente. Estas herramientas necesitan recolectar información de los ciudadanos abriendo la posibilidad de someterlos a un seguimiento. Así, las políticas de seguridad y privacidad deben desarrollarse para satisfacer y gestionar la heterogeneidad legislativa en torno a los servicios prestados y cumplir con las leyes del país en el que se proporcionan estos servicios. El objetivo de esta tesis es aportar una posible solución para la garantizar la seguridad y privacidad de los datos personales en Internet de las Cosas, mediante técnicas que resulten de la colaboración entre las áreas empresarial, legislativa y tecnológica para dar confianza a todos los actores involucrados y resolver la posible colisión de intereses entre ellos, y también debe ser capaz de poder gestionar la heterogeneidad legislativa. Considerando que gran parte de estos servicios se canalizan a través de redes de sensores inalámbricos, y que estas redes tienen importantes limitaciones de recursos, se propone un sistema de gestión que además sea capaz de dar una cobertura de seguridad y privacidad justo a medida de las necesidades. ABSTRACT New products and services offered by the “Internet of Things” will make people more efficient and more able to understand the environment and take better decisions. New assistive technologies will allow people to extend their working years and many other advantages that currently are hard to foreseen. Nonetheless, we will coexist with a large number of devices collecting information about activities, habits, preferences, etc. This situation could threaten personal privacy. Distrust could be a barrier to the full development of these new products and services. Internet of Things reaches its most representative meaning by the Smart Cities providing the necessary solutions to improve the management of modern cities by means of more efficient tools. These tools require gathering citizens’ information about their activity, preferences, habits, etc. opening up the possibility of tracking them. Thus, privacy and security policies must be developed in order to satisfy and manage the legislative heterogeneity surrounding the services provided and comply with the laws of the country where they are provided. The objective of this thesis is to provide a feasible solution to ensure the security and privacy of personal data on the Internet of Things through resulting techniques from the collaboration between business, legislative and technological areas so as to give confidence to all stakeholders and resolve the possible conflict of interest between them, as well as to manage the legislative heterogeneity. Whereas most of these services are based on wireless sensor networks, and these networks have significant resource constraints, the proposed management system is also able to cover the security and privacy requirements considering those constrains.

Sistema de ayuda a la selección de soluciones de protección de datos personales, para los productos y servicios en “Internet de las Cosas”

Los nuevos productos y servicios de “Internet de las Cosas” nos harán más eficientes, con una mayor capacidad de actuación y una mejor comprensión de nuestro entorno. Se desarrollarán nuevas ayudas técnicas que permitirán prolongar nuestra vida activa, y muchas ventajas que hoy día nos costaría imaginar. Sin embargo coexistiremos con una gran cantidad de dispositivos que recopilarán información sobre nuestra actividad, costumbres, preferencias, etc., que podrían amenazar nuestra privacidad. La desconfianza que estos riesgos podrían generar en las personas, actuaría como una barrera que podría dificultar el pleno desarrollo de esta nueva gama de productos y servicios. Internet de las Cosas, alcanza su significado más representativo con las Ciudades Inteligentes (Smart Cities) que proporcionan las herramientas necesarias para mejorar la gestión de las ciudades modernas de una manera mucho más eficiente. Estas herramientas necesitan recolectar información de los ciudadanos abriendo la posibilidad de someterlos a un seguimiento. Así, las políticas de seguridad y privacidad deben desarrollarse para satisfacer y gestionar la heterogeneidad legislativa en torno a los servicios prestados y cumplir con las leyes del país en el que se proporcionan estos servicios. El objetivo de esta tesis es aportar una posible solución para la garantizar la seguridad y privacidad de los datos personales en Internet de las Cosas, mediante técnicas que resulten de la colaboración entre las áreas empresarial, legislativa y tecnológica para dar confianza a todos los actores involucrados y resolver la posible colisión de intereses entre ellos, y también debe ser capaz de poder gestionar la heterogeneidad legislativa. Considerando que gran parte de estos servicios se canalizan a través de redes de sensores inalámbricos, y que estas redes tienen importantes limitaciones de recursos, se propone un sistema de gestión que además sea capaz de dar una cobertura de seguridad y privacidad justo a medida de las necesidades. ABSTRACT New products and services offered by the “Internet of Things” will make people more efficient and more able to understand the environment and take better decisions. New assistive technologies will allow people to extend their working years and many other advantages that currently are hard to foreseen. Nonetheless, we will coexist with a large number of devices collecting information about activities, habits, preferences, etc. This situation could threaten personal privacy. Distrust could be a barrier to the full development of these new products and services. Internet of Things reaches its most representative meaning by the Smart Cities providing the necessary solutions to improve the management of modern cities by means of more efficient tools. These tools require gathering citizens’ information about their activity, preferences, habits, etc. opening up the possibility of tracking them. Thus, privacy and security policies must be developed in order to satisfy and manage the legislative heterogeneity surrounding the services provided and comply with the laws of the country where they are provided. The objective of this thesis is to provide a feasible solution to ensure the security and privacy of personal data on the Internet of Things through resulting techniques from the collaboration between business, legislative and technological areas so as to give confidence to all stakeholders and resolve the possible conflict of interest between them, as well as to manage the legislative heterogeneity. Whereas most of these services are based on wireless sensor networks, and these networks have significant resource constraints, the proposed management system is also able to cover the security and privacy requirements considering those constrains.

Enriquecimiento de fuentes de datos con descripciones lingüísticas mediante bases de datos geográficas externas

El presente trabajo se ha centrado en la investigación de soluciones para automatizar la tarea del enriquecimiento de fuentes de datos sobre redes de sensores con descripciones lingüísticas, con el fin de facilitar la posterior generación de textos en lenguaje natural. El uso de descripciones en lenguaje natural facilita el acceso a los datos a una mayor diversidad de usuarios y, como consecuencia, permite aprovechar mejor las inversiones en redes de sensores. En el trabajo se ha considerado el uso de bases de datos abiertas para abordar la necesidad de disponer de un gran volumen y diversidad de conocimiento geográfico. Se ha analizado también el enriquecimiento de datos dentro de enfoques metodológicos de curación de datos y métodos de generación de lenguaje natural. Como resultado del trabajo, se ha planteado un método general basado en una estrategia de generación y prueba que incluye una forma de representación y uso del conocimiento heurístico con varias etapas de razonamiento para la construcción de descripciones lingüísticas de enriquecimiento de datos. En la evaluación de la propuesta general se han manejado tres escenarios, dos de ellos para generación de referencias geográficas sobre redes de sensores complejas de dimensión real y otro para la generación de referencias temporales. Los resultados de la evaluación han mostrado la validez práctica de la propuesta general exhibiendo mejoras de rendimiento respecto a otros enfoques. Además, el análisis de los resultados ha permitido identificar y cuantificar el impacto previsible de diversas líneas de mejora en bases de datos abiertas. ABSTRACT This work has focused on the search for solutions to automate the task of enrichment sensor-network-based data sources with textual descriptions, so as to facilitate the generation of natural language texts. Using natural language descriptions facilitates data access to a wider range of users and, therefore, allows better leveraging investments in sensor networks. In this work we have considered the use of open databases to address the need for a large volume and diversity of geographical knowledge. We have also analyzed data enrichment in methodological approaches and data curation methods of natural language generation. As a result, it has raised a general method based on a strategy of generating and testing that includes a representation using heuristic knowledge with several stages of reasoning for the construction of linguistic descriptions of data enrichment. In assessing the overall proposal three scenarios have been addressed, two of them in the environmental domain with complex sensor networks and another real dimension in the time domain. The evaluation results have shown the validity and practicality of our proposal, showing performance improvements over other approaches. Furthermore, the analysis of the results has allowed identifying and quantifying the expected impact of various lines of improvement in open databases.

Contribution to the improvement of communication services in nanosatellite constellations using delay and disruption tolerant networking based architectures

Esta tesis se desarrolla dentro del marco de las comunicaciones satelitales en el innovador campo de los pequeños satélites también llamados nanosatélites o cubesats, llamados así por su forma cubica. Estos nanosatélites se caracterizan por su bajo costo debido a que usan componentes comerciales llamados COTS (commercial off-the-shelf) y su pequeño tamaño como los Cubesats 1U (10cm*10 cm*10 cm) con masa aproximada a 1 kg. Este trabajo de tesis tiene como base una iniciativa propuesta por el autor de la tesis para poner en órbita el primer satélite peruano en mi país llamado chasqui I, actualmente puesto en órbita desde la Estación Espacial Internacional. La experiencia de este trabajo de investigación me llevo a proponer una constelación de pequeños satélites llamada Waposat para dar servicio de monitoreo de sensores de calidad de agua a nivel global, escenario que es usado en esta tesis. Es ente entorno y dadas las características limitadas de los pequeños satélites, tanto en potencia como en velocidad de datos, es que propongo investigar una nueva arquitectura de comunicaciones que permita resolver en forma óptima la problemática planteada por los nanosatélites en órbita LEO debido a su carácter disruptivo en sus comunicaciones poniendo énfasis en las capas de enlace y aplicación. Esta tesis presenta y evalúa una nueva arquitectura de comunicaciones para proveer servicio a una red de sensores terrestres usando una solución basada en DTN (Delay/Disruption Tolerant Networking) para comunicaciones espaciales. Adicionalmente, propongo un nuevo protocolo de acceso múltiple que usa una extensión del protocolo ALOHA no ranurado, el cual toma en cuenta la prioridad del trafico del Gateway (ALOHAGP) con un mecanismo de contienda adaptativo. Utiliza la realimentación del satélite para implementar el control de la congestión y adapta dinámicamente el rendimiento efectivo del canal de una manera óptima. Asumimos un modelo de población de sensores finito y una condición de tráfico saturado en el que cada sensor tiene siempre tramas que transmitir. El desempeño de la red se evaluó en términos de rendimiento efectivo, retardo y la equidad del sistema. Además, se ha definido una capa de convergencia DTN (ALOHAGP-CL) como un subconjunto del estándar TCP-CL (Transmission Control Protocol-Convergency Layer). Esta tesis muestra que ALOHAGP/CL soporta adecuadamente el escenario DTN propuesto, sobre todo cuando se utiliza la fragmentación reactiva. Finalmente, esta tesis investiga una transferencia óptima de mensajes DTN (Bundles) utilizando estrategias de fragmentación proactivas para dar servicio a una red de sensores terrestres utilizando un enlace de comunicaciones satelitales que utiliza el mecanismo de acceso múltiple con prioridad en el tráfico de enlace descendente (ALOHAGP). El rendimiento efectivo ha sido optimizado mediante la adaptación de los parámetros del protocolo como una función del número actual de los sensores activos recibidos desde el satélite. También, actualmente no existe un método para advertir o negociar el tamaño máximo de un “bundle” que puede ser aceptado por un agente DTN “bundle” en las comunicaciones por satélite tanto para el almacenamiento y la entrega, por lo que los “bundles” que son demasiado grandes son eliminados o demasiado pequeños son ineficientes. He caracterizado este tipo de escenario obteniendo una distribución de probabilidad de la llegada de tramas al nanosatélite así como una distribución de probabilidad del tiempo de visibilidad del nanosatélite, los cuales proveen una fragmentación proactiva óptima de los DTN “bundles”. He encontrado que el rendimiento efectivo (goodput) de la fragmentación proactiva alcanza un valor ligeramente inferior al de la fragmentación reactiva. Esta contribución permite utilizar la fragmentación activa de forma óptima con todas sus ventajas tales como permitir implantar el modelo de seguridad de DTN y la simplicidad al implementarlo en equipos con muchas limitaciones de CPU y memoria. La implementación de estas contribuciones se han contemplado inicialmente como parte de la carga útil del nanosatélite QBito, que forma parte de la constelación de 50 nanosatélites que se está llevando a cabo dentro del proyecto QB50. ABSTRACT This thesis is developed within the framework of satellite communications in the innovative field of small satellites also known as nanosatellites (<10 kg) or CubeSats, so called from their cubic form. These nanosatellites are characterized by their low cost because they use commercial components called COTS (commercial off-the-shelf), and their small size and mass, such as 1U Cubesats (10cm * 10cm * 10cm) with approximately 1 kg mass. This thesis is based on a proposal made by the author of the thesis to put into orbit the first Peruvian satellite in his country called Chasqui I, which was successfully launched into orbit from the International Space Station in 2014. The experience of this research work led me to propose a constellation of small satellites named Waposat to provide water quality monitoring sensors worldwide, scenario that is used in this thesis. In this scenario and given the limited features of nanosatellites, both power and data rate, I propose to investigate a new communications architecture that allows solving in an optimal manner the problems of nanosatellites in orbit LEO due to the disruptive nature of their communications by putting emphasis on the link and application layers. This thesis presents and evaluates a new communications architecture to provide services to terrestrial sensor networks using a space Delay/Disruption Tolerant Networking (DTN) based solution. In addition, I propose a new multiple access mechanism protocol based on extended unslotted ALOHA that takes into account the priority of gateway traffic, which we call ALOHA multiple access with gateway priority (ALOHAGP) with an adaptive contention mechanism. It uses satellite feedback to implement the congestion control, and to dynamically adapt the channel effective throughput in an optimal way. We assume a finite sensor population model and a saturated traffic condition where every sensor always has frames to transmit. The performance was evaluated in terms of effective throughput, delay and system fairness. In addition, a DTN convergence layer (ALOHAGP-CL) has been defined as a subset of the standard TCP-CL (Transmission Control Protocol-Convergence Layer). This thesis reveals that ALOHAGP/CL adequately supports the proposed DTN scenario, mainly when reactive fragmentation is used. Finally, this thesis investigates an optimal DTN message (bundles) transfer using proactive fragmentation strategies to give service to a ground sensor network using a nanosatellite communications link which uses a multi-access mechanism with priority in downlink traffic (ALOHAGP). The effective throughput has been optimized by adapting the protocol parameters as a function of the current number of active sensors received from satellite. Also, there is currently no method for advertising or negotiating the maximum size of a bundle which can be accepted by a bundle agent in satellite communications for storage and delivery, so that bundles which are too large can be dropped or which are too small are inefficient. We have characterized this kind of scenario obtaining a probability distribution for frame arrivals to nanosatellite and visibility time distribution that provide an optimal proactive fragmentation of DTN bundles. We have found that the proactive effective throughput (goodput) reaches a value slightly lower than reactive fragmentation approach. This contribution allows to use the proactive fragmentation optimally with all its advantages such as the incorporation of the security model of DTN and simplicity in protocol implementation for computers with many CPU and memory limitations. The implementation of these contributions was initially contemplated as part of the payload of the nanosatellite QBito, which is part of the constellation of 50 nanosatellites envisaged under the QB50 project.

Trust and Privacy Solutions Based on Holistic Service Requirements

The products and services designed for Smart Cities provide the necessary tools to improve the management of modern cities in a more efficient way. These tools need to gather citizens’ information about their activity, preferences, habits, etc. opening up the possibility of tracking them. Thus, privacy and security policies must be developed in order to satisfy and manage the legislative heterogeneity surrounding the services provided and comply with the laws of the country where they are provided. This paper presents one of the possible solutions to manage this heterogeneity, bearing in mind these types of networks, such as Wireless Sensor Networks, have important resource limitations. A knowledge and ontology management system is proposed to facilitate the collaboration between the business, legal and technological areas. This will ease the implementation of adequate specific security and privacy policies for a given service. All these security and privacy policies are based on the information provided by the deployed platforms and by expert system processing.

Sensoriamento automático e participativo em cidades.

As cidades estão a seu tempo e a seu modo, modernizando os serviços prestados à população. Entre os diversos fatores que estão contribuindo para esta evolução estão a diversificação e proliferação de sensores, nos diversos domínios de serviços das cidades, e os novos canais de comunicação com os munícipes, entre eles, as redes sociais e mais recentemente os sistemas crowdsensing, motivados pelos anseios sociais, por melhores serviços públicos e pela popularização dos dispositivos móveis. Nesta direção, a eficiência administrativa é um fator essencial, uma vez que as cidades estão se mostrando mais complexas na medida em que cresce a população nas áreas urbanas. A utilização de técnicas de sistemas distribuídos para que múltiplos domínios de serviços usufruam da mesma infraestrutura computacional, pode auxiliar na eficiência das cidades, evitando gastos administrativos duplicados e até mesmo, possibilitando a correlação de eventos entre os serviços, favorecendo a identificação de fatores de causalidades e assim, a tomada de decisões administrativas mais objetivas e precisas. Neste contexto, este trabalho concentra-se na análise de um middleware direcionado à gestão de cidades para coleta, integração e interpretação dos dados de sensores, pertencentes aos serviços disponíveis da própria cidade, junto com os dados do sensoriamento colaborado pelos cidadãos. Para avaliação do conceito foi investigado o cenário de monitoração da conservação de vias públicas. Após 3 meses de coletas de dados por um sistema de sensoriamento automático, totalizando mais de 360 mil pontos e também mais de 90 relatórios pelo sensoriamento participativo, verificou-se que um sistema distribuído pode realizar a interpretação de séries históricas, engajar os munícipes apoiar a manutenção dos serviços da cidade e também indicar objetivamente aos gestores públicos os pontos que devem ser prioritariamente atendidos. Aliar ferramentas pelas quais o cidadão pode, de acordo com sua necessidade, convicção e altruísmo, exercer influência nos gestores públicos com o suporte de informação contínua e critérios objetivos das redes de sensores, pode estimular a continua excelência dos serviços públicos.

A Computational Architecture Based on RFID Sensors for Traceability in Smart Cities

Information Technology and Communications (ICT) is presented as the main element in order to achieve more efficient and sustainable city resource management, while making sure that the needs of the citizens to improve their quality of life are satisfied. A key element will be the creation of new systems that allow the acquisition of context information, automatically and transparently, in order to provide it to decision support systems. In this paper, we present a novel distributed system for obtaining, representing and providing the flow and movement of people in densely populated geographical areas. In order to accomplish these tasks, we propose the design of a smart sensor network based on RFID communication technologies, reliability patterns and integration techniques. Contrary to other proposals, this system represents a comprehensive solution that permits the acquisition of user information in a transparent and reliable way in a non-controlled and heterogeneous environment. This knowledge will be useful in moving towards the design of smart cities in which decision support on transport strategies, business evaluation or initiatives in the tourism sector will be supported by real relevant information. As a final result, a case study will be presented which will allow the validation of the proposal.

Low-cost interrogation of optical fibre Bragg grating sensors

Through the application of novel signal processing techniques we are able to measure physical measurands with both high accuracy and low noise susceptibility. The first interrogation scheme is based upon a CCD spectrometer. We compare different algorithms for resolving the Bragg wavelength from a low resolution discrete representation of the reflected spectrum, and present optimal processing methods for providing a high integrity measurement from the reflection image. Our second sensing scheme uses a novel network of sensors to measure the distributive strain response of a mechanical system. Using neural network processing methods we demonstrate the measurement capabilities of a scalable low-cost fibre Bragg grating sensor network. This network has been shown to be comparable with the performance of existing fibre Bragg grating sensing techniques, at a greatly reduced implementation cost.