Evaluation of an average numerator relationship matrix model and a Bayesian hierarchical model for growth traits in Nellore cattle with uncertain paternity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perda de calor por evaporação cutânea associada às características morfológicas do pelame de cabras leiteiras criadas em ambiente tropical

A perda de calor por evaporação cutânea e as características morfológicas do pelame (espessura da capa, comprimento médio dos pêlos, número de pêlos por unidade de área e diâmetro médio dos pêlos) foram avaliadas em 254 cabras das raças Saanen, Alpina e mestiças ½ Boer ½ Saanen. Utilizou-se uma cápsula ventilada para medir a evaporação cutânea, determinada em três regiões do corpo (próximo ao pescoço, meio do flanco e quarto traseiro), enquanto as características morfológicas do pelame foram avaliadas a partir de amostras de pêlos, tomadas 18 cm abaixo da coluna vertebral, exceto a espessura da capa, que foi medida in situ. Os resultados indicaram que os animais apresentam pelame pouco denso, formado por pêlos finos e compridos. Animais mestiços (½ Bôer ½ Saanen) apresentaram taxas de evaporação cutânea mais elevadas que os puros das raças Saanen e Alpina.

Study of relations among age at first calving, average weight gains and weights from weaning to maturity in Nellore cattle

Dados de 23.120 animais da raça Nelore foram utilizados para estimar herdabilidade e correlações genéticas para a idade ao primeiro parto, o ganho em peso da desmama ao ano e do ano ao sobreano, o peso à desmama, o peso ao ano, o peso ao sobreano e os pesos aos 2 e aos 5 anos de idade. Utilizou-se o método da máxima verossimilhança restrita, em análise multicaracterística. As herdabilidades estimadas para idade ao primeiro parto, ganho da desmama ao ano, ganho do ano ao sobreano, peso à desmama, peso ao ano, peso ao sobreano e peso aos 2 aos 5 anos foram de 0,17 ± 0,01; 0,23 ± 0,03; 0,25 ± 0,03; 0,28 ± 0,02; 0,26 ± 0,03; 0,30 ± 0,03; 0,32 ± 0,02 e 0,36 ± 0,04, respectivamente. Correlações genéticas baixas e negativas foram estimadas entre a idade ao primeiro parto e os pesos medidos em diferentes idades, que variaram de -0,26 a -0,14. As correlações genéticas estimadas entre a idade ao primeiro parto e os ganhos de peso também foram negativas, porém levemente superiores (-0,29 e -0,32). Os resultados indicam que a seleção para maior ganho de peso pode reduzir a idade ao primeiro parto e aumentar o peso adulto de fêmeas da raça Nelore. Mudança genética mais rápida para diminuição da idade ao primeiro parto das fêmeas pode ser obtida com a inclusão dessa característica nos índices de seleção.

Modeling of average growth curve in Santa Ines sheep using random regression models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Prediction of intake and average daily gain by different feeding systems for goats

A main purpose of a mathematical nutrition model (a.k.a., feeding systems) is to provide a mathematical approach for determining the amount and composition of the diet necessary for a certain level of animal productive performance. Therefore, feeding systems should be able to predict voluntary feed intake and to partition nutrients into different productive functions and performances. In the last decades, several feeding systems for goats have been developed. The objective of this paper is to compare and evaluate the main goat feeding systems (AFRC, CSIRO, NRC, and SRNS), using data of individual growing goat kids from seven studies conducted in Brazil. The feeding systems were evaluated by regressing the residuals (observed minus predicted) on the predicted values centered on their means. The comparisons showed that these systems differ in their approach for estimating dry matter intake (DMI) and energy requirements for growing goats. The AFRC system was the most accurate for predicting DMI (mean bias = 91 g/d, P < 0.001; linear bias 0.874). The average ADG accounted for a large part of the bias in the prediction of DMI by CSIRO, NRC, and, mainly, AFRC systems. The CSIRO model gave the most accurate predictions of ADG when observed DMI was used as input in the models (mean bias 12 g/d, P < 0.001; linear bias -0.229). while the AFRC was the most accurate when predicted DMI was used (mean bias 8g/d. P > 0.1; linear bias -0.347). (C) 2011 Elsevier B.V. All rights reserved.

Enhancement of thermal stability, strength and extensibility of lipid-based polyurethanes with cellulose-based nanofibers

Cellulose was extracted from lignocellulosic fibers and nanocrystalline cellulose (NC) prepared by alkali treatment of the fiber, steam explosion of the mercerized fiber, bleaching of the steam exploded fiber and finally acid treatment by 5% oxalic acid followed again by steam explosion. The average length and diameter of the NC were between 200-250 nm and 4-5 nm, respectively, in a monodisperse distribution. Different concentrations of the NC (0.1, 0.5, 1.0, 1.5, 2.0 and 2.5% by weight) were dispersed non-covalently into a completely bio-based thermoplastic polyurethane (TPU) derived entirely from oleic acid. The physical properties of the TPU nanocomposites were assessed by Fourier Transform Infra-Red spectroscopy (FTIR), Thermo-Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), Dynamic Mechanical Analysis (DMA) and Mechanical Properties Analysis. The nanocomposites demonstrated enhanced stress and elongation at break and improved thermal stability compared to the neat TPU. The best results were obtained with 0.5% of NC in the TPU. The elongation at break of this sample was improved from 178% to 269% and its stress at break from 29.3 to 40.5 MPa. In this and all other samples the glass transition temperature, melting temperature and crystallization behavior were essentially unaffected. This finding suggests a potential method of increasing the strength and the elongation at break of typically brittle and weak lipid-based TPUs without alteration of the other physico-chemical properties of the polymer. (C) 2012 Elsevier Ltd. All rights reserved.

Depósitos de calda obtidos com a aplicação aérea de defensivos na cultura da banana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crescimento, produção e qualidade de frutos da bananeira 'Figo cinza', em Botucatu-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de genótipos de bananeira em Botucatu-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crescimento e produção de genótipos de bananeiras em clima subtropical

O presente trabalho teve como objetivo avaliar as características de crescimento e o potencial produtivo de genótipos de bananeira em Botucatu/SP. Foram avaliadas características de crescimento, tais como altura de planta, circunferência do pseudocaule, número de folhas e número de dias entre o florescimento e a colheita. Estas medidas foram realizadas na emissão da inflorescência. Foram mensuradas também as características de produção, como peso do cacho, número de frutos, peso médio dos frutos, produtividade, número de pencas; peso, número, comprimento e diâmetro dos frutos da 2a penca. O delineamento adotado foi o inteiramente casualisado, com 11 tratamentos (genótipos), cinco repetições e duas plantas úteis por parcela experimental. Os genótipos que apresentaram melhor desempenho agronômico, dentro de cada grupo genômico, foram 'Grand Naine'(AAA), 'Thap Maeo' (AAB) e 'Fhia 01' (AAAB).

Crescimento e produtividade de nogueira-macadâmia em consórcio com cafeeiro arábica irrigado

O objetivo deste trabalho foi avaliar o crescimento e a produtividade de cultivares de nogueira-macadâmia (Macadamia integrifolia), em sistema de cultivo consorciado com café (Coffea arabica) irrigado. O experimento foi realizado em delineamento inteiramente ao acaso, com dez repetições. Seis cultivares de macadâmia foram utilizadas, das quais três nacionais (IAC 4-12B, IAC 4-20 e IAC 9-20) e três havaianas (HAES 344, HAES 660 e HAES 816). Nos quatro primeiros anos de produção, foram feitas avaliações de: altura de planta, diâmetro de copa e de tronco, número de nozes por planta, peso médio de noz, peso médio de amêndoa, produção de nozes por planta, taxa de recuperação e produção de amêndoas por planta. As cultivares nacionais apresentaram menor crescimento em altura, com destaque para IAC 4-20, porém, com copas de maior diâmetro. As cultivares nacionais são mais produtivas, com destaque para a IAC 4-12B.

Modelo matemático para otimização dos custos de um sistema híbrido eólico-solar : aplicação no bombeamento de petróleo

This work purposes the application of a methodology to optimize the implantation cost of an wind-solar hybrid system for oil pumping. The developed model is estimated the implantation cost of system through Multiple Linear Regression technique, on the basis of the previous knowledge of variables: necessary capacity of storage, total daily energy demand, wind power, module power and module number. These variables are gotten by means of sizing. The considered model not only can be applied to the oil pumping, but also for any other purposes of electric energy generation for conversion of solar, wind or solar-wind energy, that demand short powers. Parametric statistical T-student tests had been used to detect the significant difference in the average of total cost to being considered the diameter of the wind, F by Snedecor in the variance analysis to test if the coefficients of the considered model are significantly different of zero and test not-parametric statistical by Friedman, toverify if there is difference in the system cost, by being considered the photovoltaic module powers. In decision of hypothesis tests was considered a 5%-significant level. The configurations module powers showed significant differences in total cost of investment by considering an electrical motor of 3 HP. The configurations module powers showed significant differences in total cost of investment by considering an electrical motor of 5 HP only to wind speed of 4m/s and 6 m/s in wind of 3 m, 4m and 5 m of diameter. There was not significant difference in costs to diameters of winds of 3 m and 4m. The mathematical model and the computational program may be used to others applications which require electrical between 2.250 W and 3.750 W. A computational program was developed to assist the study of several configurations that optimizes the implantation cost of an wind-solar system through considered mathematical model

Projeto, construção e levantamento de desempenho de um concentrador solar cilíndro parabólico com mecanismo automático de rastreamento solar

An cylinder-parabolic solar concentrator is presented to produce steam for different applications. This prototype was built in glass fiber with dimensions that follow a study of optimization of parameters inherent in the optical reflection of sunlight by the surface of reflection and absorption of the same by tubing that leads the fluid of work. The surface of the concentrator of 2.24 m² has been covered by layers of mirror with 1.0 m of lenght and 2.0 cm wide. The absorb tubing consists of a copper tube diameter equal to 28 mm. The concentrator is moving to follow the apparent motion of the sun. It will be presented the processes of manufacturing and assembly of the concentrator proposed, which has as main characteristics the facilities construction and assembly, in addition to reduced cost. Will be presented data from tests performed to produce steam setting up some parameters that diagnose the efficiency of the concentrator. It will be demonstrated the viabilities thermal, economic and of materials of the proposed system.The maximum temperature achieved in the vacuum tube absorber was 232.1°C and average temperature for 1 hour interval was 171.5°C, obtained in a test with automation. The maximum temperature achieved in the output of water was 197.7°C for a temperature of 200.0°C in the absorber tube. The best average result of the water exit temperature to interval of 1 hour was 170.2°C for a temperature of 171.2°C, in the absorber tube, obtained in test with automation. Water exit mean temperatures were always above of the water steaming temperature. The concentrator present a useful efficiency of 38% and a production cost of approximately R$ 450,00 ( $ 160.34)

Correlaçôes fenotípicas entre características de produção e crescimento em genótipos de bananeira

The correlations between the characters seen in experimental trials are generated by genetic and environmental factors and are estimated for the purpose of measuring the change in a character when the selection is practised in another. The objective was to correlate bunch weight with characteristics of growth and production of 4 genomic groups of banana: 'Nanicao-IAC-2001', 'Grand Naine', 'Caipira' and 'Nam' ( AAA); 'Ma a', 'Thap Maeo', 'Prata Ana' and 'Prata Zulu' (AAB), 'Fhia 01', 'Fhia 18', 'Prata Grauda' and 'Maca Tropical' (AAAB) and 'Figo Cinza' (ABB), Botucatu, Brazil. Some growth characteristics were evaluated such as: plant heights, the pseudostem circumference, number of leaves, number of days between planting and flowering, number of days between flowering and harvest and number of days from planting to harvest. These characteristics were measured at the flowering time. The production characteristics such as the bunch weigth, number of fruits, average weigth of the fruits, productivity, number of hands and weight, number, length and diameter of the fruits of the 2(nd) hand. The correlations between the characteristics studied varied for each genotype, but they all showed significant correlation between the bunch weight and the characteristics fruit weigth and productivity. The correlations involving all genotypes were predominantly positive and significant.

Stem diameter and height of chrysanthemum cv Yokoono as affected by gibberellic acid

The effect of gibberellic acid has been shown mainly to promote cell division and elongation. This study was aimed to evaluate the development of height and diameter of the stems of chrysanthemum cultivar Yoko ono by the applications of gibberellic acid (GA(3)) in the field. The treatments were composed of four doses (0, 40, 80 and 120 mg L(-1)) at 15 and 30 days after transplanting. From the findings, It can be concluded that GA(3) significantly affected the diameter of stem at higher doses, and was unable to affect the height of stem.