Modeling and control of electromechanical systems

The material presented in the these notes covers the sessions Modelling of electromechanical systems, Passive control theory I and Passive control theory II of the II EURON/GEOPLEX Summer School on Modelling and Control of Complex Dynamical Systems.We start with a general description of what an electromechanical system is from a network modelling point of view. Next, a general formulation in terms of PHDS is introduced, and some of the previous electromechanical systems are rewritten in this formalism. Power converters, which are variable structure systems (VSS), can also be given a PHDS form.We conclude the modelling part of these lectures with a rather complex example, showing the interconnection of subsystems from several domains, namely an arrangement to temporally store the surplus energy in a section of a metropolitan transportation system based on dc motor vehicles, using either arrays of supercapacitors or an electric poweredflywheel. The second part of the lectures addresses control of PHD systems. We first present the idea of control as power connection of a plant and a controller. Next we discuss how to circumvent this obstacle and present the basic ideas of Interconnection and Damping Assignment (IDA) passivity-based control of PHD systems.

Expanding Combined Heat and Power in Iowa, October 2015

Combined Heat and Power (CHP) refers to the onsite production of electricity and thermal energy from the same fuel source. Integrating power and thermal energy production is more efficient than separate generating systems and used in the right situation can yield several benefits.

Combined Heat and Power Resource Guide, December 2015

Combined Heat and Power (CHP) refers to the onsite production of electricity and thermal energy from the same fuel source. Integrating power and thermal energy production is more efficient than separate generating systems and used in the right situation can yield several benefits.

Body mass index and risk of head and neck cancer in a pooled analysis of case-control studies in the International Head and Neck Cancer Epidemiology (INHANCE) Consortium.

BACKGROUND: Head and neck cancer (HNC) risk is elevated among lean people and reduced among overweight or obese people in some studies; however, it is unknown whether these associations differ for certain subgroups or are influenced by residual confounding from the effects of alcohol and tobacco use or by other sources of biases. METHODS: We pooled data from 17 case-control studies including 12 716 cases and the 17 438 controls. Odds ratios (ORs) and 95% confidence intervals (CIs) were estimated for associations between body mass index (BMI) at different ages and HNC risk, adjusted for age, sex, centre, race, education, tobacco smoking and alcohol consumption. RESULTS: Adjusted ORs (95% CIs) were elevated for people with BMI at reference (date of diagnosis for cases and date of selection for controls) 25.0-30.0 kg/m(2) (0.52, 0.44-0.60) and BMI >/=30 kg/m(2) (0.43, 0.33-0.57), compared with BMI >18.5-25.0 kg/m(2). These associations did not differ by age, sex, tumour site or control source. Although the increased risk among people with BMI 25 kg/m(2) was present only in smokers and drinkers. CONCLUSIONS: In our large pooled analysis, leanness was associated with increased HNC risk regardless of smoking and drinking status, although reverse causality cannot be excluded. The reduced risk among overweight or obese people may indicate body size is a modifier of the risk associated with smoking and drinking. Further clarification may be provided by analyses of prospective cohort and mechanistic studies.

Social and medical vulnerability factors of frequent users at the emergency department: a case-control study

BACKGROUND: Up to 5% of patients presenting to the emergency department (ED) four or more times within a 12 month period represent 21% of total ED visits. In this study we sought to characterize social and medical vulnerability factors of ED frequent users (FUs) and to explore if these factors hold simultaneously. METHODS: We performed a case-control study at Lausanne University Hospital, Switzerland. Patients over 18 years presenting to the ED at least once within the study period (April 2008 toMarch 2009) were included. FUs were defined as patients with four or more ED visits within the previous 12 months. Outcome data were extracted from medical records of the first ED attendance within the study period. Outcomes included basic demographics and social variables, ED admission diagnosis, somatic and psychiatric days hospitalized over 12 months, and having a primary care physician.We calculated the percentage of FUs and non-FUs having at least one social and one medical vulnerability factor. The four chosen social factors included: unemployed and/or dependence on government welfare, institutionalized and/or without fixed residence, either separated, divorced or widowed, and under guardianship. The fourmedical vulnerability factors were: ≥6 somatic days hospitalized, ≥1 psychiatric days hospitalized, ≥5 clinical departments used (all three factors measured over 12 months), and ED admission diagnosis of alcohol and/or drug abuse. Univariate and multivariate logistical regression analyses allowed comparison of two JGIM ABSTRACTS S391 random samples of 354 FUs and 354 non-FUs (statistical power 0.9, alpha 0.05 for all outcomes except gender, country of birth, and insurance type). RESULTS: FUs accounted for 7.7% of ED patients and 24.9% of ED visits. Univariate logistic regression showed that FUs were older (mean age 49.8 vs. 45.2 yrs, p=0.003),more often separated and/or divorced (17.5%vs. 13.9%, p=0.029) or widowed (13.8% vs. 8.8%, p=0.029), and either unemployed or dependent on government welfare (31.3% vs. 13.3%, p<0.001), compared to non-FUs. FUs cumulated more days hospitalized over 12 months (mean number of somatic days per patient 1.0 vs. 0.3, p<0.001; mean number of psychiatric days per patient 0.12 vs. 0.03, p<0.001). The two groups were similar regarding gender distribution (females 51.7% vs. 48.3%). The multivariate linear regression model was based on the six most significant factors identified by univariate analysis The model showed that FUs had more social problems, as they were more likely to be institutionalized or not have a fixed residence (OR 4.62; 95% CI, 1.65 to 12.93), and to be unemployed or dependent on government welfare (OR 2.03; 95% CI, 1.31 to 3.14) compared to non-FUs. FUs were more likely to need medical care, as indicated by involvement of≥5 clinical departments over 12 months (OR 6.2; 95%CI, 3.74 to 10.15), having an ED admission diagnosis of substance abuse (OR 3.23; 95% CI, 1.23 to 8.46) and having a primary care physician (OR 1.70;95%CI, 1.13 to 2.56); however, they were less likely to present with an admission diagnosis of injury (OR 0.64; 95% CI, 0.40 to 1.00) compared to non-FUs. FUs were more likely to combine at least one social with one medical vulnerability factor (38.4% vs. 12.1%, OR 7.74; 95% CI 5.03 to 11.93). CONCLUSIONS: FUs were more likely than non-FUs to have social and medical vulnerability factors and to have multiple factors in combination.

Tapping the innovation potential of corporate engagement with stakeholders

Summary This dissertation explores how stakeholder dialogue influences corporate processes, and speculates about the potential of this phenomenon - particularly with actors, like non-governmental organizations (NGOs) and other representatives of civil society, which have received growing attention against a backdrop of increasing globalisation and which have often been cast in an adversarial light by firms - as a source of teaming and a spark for innovation in the firm. The study is set within the context of the introduction of genetically-modified organisms (GMOs) in Europe. Its significance lies in the fact that scientific developments and new technologies are being generated at an unprecedented rate in an era where civil society is becoming more informed, more reflexive, and more active in facilitating or blocking such new developments, which could have the potential to trigger widespread changes in economies, attitudes, and lifestyles, and address global problems like poverty, hunger, climate change, and environmental degradation. In the 1990s, companies using biotechnology to develop and offer novel products began to experience increasing pressure from civil society to disclose information about the risks associated with the use of biotechnology and GMOs, in particular. Although no harmful effects for humans or the environment have been factually demonstrated even to date (2008), this technology remains highly-contested and its introduction in Europe catalysed major companies to invest significant financial and human resources in stakeholder dialogue. A relatively new phenomenon at the time, with little theoretical backing, dialogue was seen to reflect a move towards greater engagement with stakeholders, commonly defined as those "individuals or groups with which. business interacts who have a 'stake', or vested interest in the firm" (Carroll, 1993:22) with whom firms are seen to be inextricably embedded (Andriof & Waddock, 2002). Regarding the organisation of this dissertation, Chapter 1 (Introduction) describes the context of the study, elaborates its significance for academics and business practitioners as an empirical work embedded in a sector at the heart of the debate on corporate social responsibility (CSR). Chapter 2 (Literature Review) traces the roots and evolution of CSR, drawing on Stakeholder Theory, Institutional Theory, Resource Dependence Theory, and Organisational Learning to establish what has already been developed in the literature regarding the stakeholder concept, motivations for engagement with stakeholders, the corporate response to external constituencies, and outcomes for the firm in terms of organisational learning and change. I used this review of the literature to guide my inquiry and to develop the key constructs through which I viewed the empirical data that was gathered. In this respect, concepts related to how the firm views itself (as a victim, follower, leader), how stakeholders are viewed (as a source of pressure and/or threat; as an asset: current and future), corporate responses (in the form of buffering, bridging, boundary redefinition), and types of organisational teaming (single-loop, double-loop, triple-loop) and change (first order, second order, third order) were particularly important in building the key constructs of the conceptual model that emerged from the analysis of the data. Chapter 3 (Methodology) describes the methodology that was used to conduct the study, affirms the appropriateness of the case study method in addressing the research question, and describes the procedures for collecting and analysing the data. Data collection took place in two phases -extending from August 1999 to October 2000, and from May to December 2001, which functioned as `snapshots' in time of the three companies under study. The data was systematically analysed and coded using ATLAS/ti, a qualitative data analysis tool, which enabled me to sort, organise, and reduce the data into a manageable form. Chapter 4 (Data Analysis) contains the three cases that were developed (anonymised as Pioneer, Helvetica, and Viking). Each case is presented in its entirety (constituting a `within case' analysis), followed by a 'cross-case' analysis, backed up by extensive verbatim evidence. Chapter 5 presents the research findings, outlines the study's limitations, describes managerial implications, and offers suggestions for where more research could elaborate the conceptual model developed through this study, as well as suggestions for additional research in areas where managerial implications were outlined. References and Appendices are included at the end. This dissertation results in the construction and description of a conceptual model, grounded in the empirical data and tied to existing literature, which portrays a set of elements and relationships deemed important for understanding the impact of stakeholder engagement for firms in terms of organisational learning and change. This model suggests that corporate perceptions about the nature of stakeholder influence the perceived value of stakeholder contributions. When stakeholders are primarily viewed as a source of pressure or threat, firms tend to adopt a reactive/defensive posture in an effort to manage stakeholders and protect the firm from sources of outside pressure -behaviour consistent with Resource Dependence Theory, which suggests that firms try to get control over extemal threats by focussing on the relevant stakeholders on whom they depend for critical resources, and try to reverse the control potentially exerted by extemal constituencies by trying to influence and manipulate these valuable stakeholders. In situations where stakeholders are viewed as a current strategic asset, firms tend to adopt a proactive/offensive posture in an effort to tap stakeholder contributions and connect the organisation to its environment - behaviour consistent with Institutional Theory, which suggests that firms try to ensure the continuing license to operate by internalising external expectations. In instances where stakeholders are viewed as a source of future value, firms tend to adopt an interactive/innovative posture in an effort to reduce or widen the embedded system and bring stakeholders into systems of innovation and feedback -behaviour consistent with the literature on Organisational Learning, which suggests that firms can learn how to optimize their performance as they develop systems and structures that are more adaptable and responsive to change The conceptual model moreover suggests that the perceived value of stakeholder contribution drives corporate aims for engagement, which can be usefully categorised as dialogue intentions spanning a continuum running from low-level to high-level to very-high level. This study suggests that activities aimed at disarming critical stakeholders (`manipulation') providing guidance and correcting misinformation (`education'), being transparent about corporate activities and policies (`information'), alleviating stakeholder concerns (`placation'), and accessing stakeholder opinion ('consultation') represent low-level dialogue intentions and are experienced by stakeholders as asymmetrical, persuasive, compliance-gaining activities that are not in line with `true' dialogue. This study also finds evidence that activities aimed at redistributing power ('partnership'), involving stakeholders in internal corporate processes (`participation'), and demonstrating corporate responsibility (`stewardship') reflect high-level dialogue intentions. This study additionally finds evidence that building and sustaining high-quality, trusted relationships which can meaningfully influence organisational policies incline a firm towards the type of interactive, proactive processes that underpin the development of sustainable corporate strategies. Dialogue intentions are related to type of corporate response: low-level intentions can lead to buffering strategies; high-level intentions can underpin bridging strategies; very high-level intentions can incline a firm towards boundary redefinition. The nature of corporate response (which encapsulates a firm's posture towards stakeholders, demonstrated by the level of dialogue intention and the firm's strategy for dealing with stakeholders) favours the type of learning and change experienced by the organisation. This study indicates that buffering strategies, where the firm attempts to protect itself against external influences and cant' out its existing strategy, typically lead to single-loop learning, whereby the firm teams how to perform better within its existing paradigm and at most, improves the performance of the established system - an outcome associated with first-order change. Bridging responses, where the firm adapts organisational activities to meet external expectations, typically leads a firm to acquire new behavioural capacities characteristic of double-loop learning, whereby insights and understanding are uncovered that are fundamentally different from existing knowledge and where stakeholders are brought into problem-solving conversations that enable them to influence corporate decision-making to address shortcomings in the system - an outcome associated with second-order change. Boundary redefinition suggests that the firm engages in triple-loop learning, where the firm changes relations with stakeholders in profound ways, considers problems from a whole-system perspective, examining the deep structures that sustain the system, producing innovation to address chronic problems and develop new opportunities - an outcome associated with third-order change. This study supports earlier theoretical and empirical studies {e.g. Weick's (1979, 1985) work on self-enactment; Maitlis & Lawrence's (2007) and Maitlis' (2005) work and Weick et al's (2005) work on sensegiving and sensemaking in organisations; Brickson's (2005, 2007) and Scott & Lane's (2000) work on organisational identity orientation}, which indicate that corporate self-perception is a key underlying factor driving the dynamics of organisational teaming and change. Such theorizing has important implications for managerial practice; namely, that a company which perceives itself as a 'victim' may be highly inclined to view stakeholders as a source of negative influence, and would therefore be potentially unable to benefit from the positive influence of engagement. Such a selfperception can blind the firm from seeing stakeholders in a more positive, contributing light, which suggests that such firms may not be inclined to embrace external sources of innovation and teaming, as they are focussed on protecting the firm against disturbing environmental influences (through buffering), and remain more likely to perform better within an existing paradigm (single-loop teaming). By contrast, a company that perceives itself as a 'leader' may be highly inclined to view stakeholders as a source of positive influence. On the downside, such a firm might have difficulty distinguishing when stakeholder contributions are less pertinent as it is deliberately more open to elements in operating environment (including stakeholders) as potential sources of learning and change, as the firm is oriented towards creating space for fundamental change (through boundary redefinition), opening issues to entirely new ways of thinking and addressing issues from whole-system perspective. A significant implication of this study is that potentially only those companies who see themselves as a leader are ultimately able to tap the innovation potential of stakeholder dialogue.

Free Open Source Software and Dual-Use: Loophole or Dissent?

The Free Open Source Software (FOSS) seem far from the military field but in some cases, some technologies normally used for civilian purposes may have military applications. These products and technologies are called dual-use. Can we manage to combine FOSS and dual-use products? On one hand, we have to admit that this kind of association exists - dual-use software can be FOSS and many examples demonstrate this duality - but on the other hand, dual-use software available under free licenses lead us to ask many questions. For example, the dual-use export control laws aimed at stemming the proliferation of weapons of mass destruction. Dual-use export in United States (ITAR) and Europe (regulation 428/2009) implies as a consequence the prohibition or regulation of software exportation, involving the closing of source code. Therefore, the issues of exported softwares released under free licenses arises. If software are dual-use goods and serve for military purposes, they may represent a danger. By the rights granted to licenses to run, study, redistribute and distribute modified versions of the software, anyone can access the free dual-use software. So, the licenses themselves are not at the origin of the risk, it is actually linked to the facilitated access to source codes. Seen from this point of view, it goes against the dual-use regulation which allows states to control these technologies exportation. For this analysis, we will discuss about various legal questions and draft answers from either licenses or public policies in this respect.

Report on theorerical results of power generation and conversion

Experimental results of a new controller able to support bidirectional power flow in a full-bridge rectifier with boost-like topology are obtained. The controller is computed using port Hamiltonian passivity techniques for a suitable generalized state space averaging truncation system, which transforms the control objectives, namely constant output voltage dc-bus and unity input power factor, into a regulation problem. Simulation results for the full system show the essential correctness of the simplifications introduced to obtain the controller, although some small experimental discrepancies point to several aspects that need further improvement.

Taajuusmuuttajan häviöidensimulointityökalun kehitys

Diplomityössä on kehitetty kaksitasoisen jännitevälipiirillisen taajuusmuuttajan häviöiden simulointiin käytettävä simulointimalli osaksi säädettävän sähkömoottorikäytön simulointityökalua, jolla voidaan analysoida eri säätöalgoritmien, kuormituksen ja kytkentätaajuuden vaikutusta taajuusmuuttajan häviöihin. Aluksi on selvitetty yksityiskohtaisesti taajuusmuuttajan häviölähteet ja häviöiden fysikaalinen tausta. Taajuusmuuttajassa käytettäville komponenteille on esitetty simulointimalleja. Taajuusmuuttajan malli ja häviöiden laskenta-algoritmit on toteutettu C-kielellä. Taajuusmuuttajan malli vastaa perusrakenteeltaan ACS800-02-0260-5 - taajuusmuuttajaa. ACS800-02-0260-5 -taajuusmuuttajan häviöitä on simuloitu erilaisissa kuormitustilanteissa, ja simulointien tueksi taajuusmuuttajan häviöt on pyritty selvittämään laboratoriomittauksin.

Effect of Shielding Gases in Laser Welding of Aluminium Alloys

High reflectivity to laser light, alloying element evaporation during high power laser welding makes aluminium alloys highly susceptibility to weld defects such as porosity, cracking and undercutting. The dynamic behaviour of the keyhole, due to fluctuating plasma above the keyhole and the vaporization ofthe alloying elements with in the keyhole, is the key problem to be solved for the improvement of the weld quality and stabilization of the keyhole dynamics isperhaps the single most important development that can broaden the application of laser welding of aluminium alloys. In laser welding, the shielding gas is commonly used to stabilize the welding process, to improve the welded joint features and to protect the welded seam from oxidation. The chemicalcomposition of the shielding gas is a key factor in achieving the final qualityof the welded joints. Wide range of shielding gases varying from the pure gasesto complex mixtures based on helium, argon, nitrogen and carbon dioxide are commercially available. These gas mixtures should be considered in terms of their suitability during laser welding of aluminium alloys to produce quality welds. The main objective of the present work is to study the effect of the shielding gascomposition during laser welding of aluminium alloys. Aluminium alloy A15754 was welded using 3kW Nd-YAG laser (continuous wave mode). The alloy samples were butt welded with different shielding gases (pure and mixture of gases) so that high quality welds with high joint efficiencies could be produced. It was observed that the chemical composition of the gases influenced the final weld quality and properties. In general, the mixture gases, in correct proportions, enabled better utilisation of the properties of the mixing gases, stabilized the welding process and produced better weld quality compared to the pure shielding gases.

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Analysis of the voltage source inverter with small DC-link capacitor

IIn electric drives, frequency converters are used to generatefor the electric motor the AC voltage with variable frequency and amplitude. When considering the annual sale of drives in values of money and units sold, the use of low-performance drives appears to be in predominant. These drives have tobe very cost effective to manufacture and use, while they are also expected to fulfill the harmonic distortion standards. One of the objectives has also been to extend the lifetime of the frequency converter. In a traditional frequency converter, a relatively large electrolytic DC-link capacitor is used. Electrolytic capacitors are large, heavy and rather expensive components. In many cases, the lifetime of the electrolytic capacitor is the main factor limiting the lifetime of the frequency converter. To overcome the problem, the electrolytic capacitor is replaced with a metallized polypropylene film capacitor (MPPF). The MPPF has improved properties when compared to the electrolytic capacitor. By replacing the electrolytic capacitor with a film capacitor the energy storage of the DC-linkwill be decreased. Thus, the instantaneous power supplied to the motor correlates with the instantaneous power taken from the network. This yields a continuousDC-link current fed by the diode rectifier bridge. As a consequence, the line current harmonics clearly decrease. Because of the decreased energy storage, the DC-link voltage fluctuates. This sets additional conditions to the controllers of the frequency converter to compensate the fluctuation from the supplied motor phase voltages. In this work three-phase and single-phase frequency converters with small DC-link capacitor are analyzed. The evaluation is obtained with simulations and laboratory measurements.

Induction motor versus permanent magnet synchronous motor in motion control applications: a comparative study

High dynamic performance of an electric motor is a fundamental prerequisite in motion control applications, also known as servo drives. Recent developments in the field of microprocessors and power electronics have enabled faster and faster movements with an electric motor. In such a dynamically demanding application, the dimensioning of the motor differs substantially from the industrial motor design, where feasible characteristics of the motor are for example high efficiency, a high power factor, and a low price. In motion control instead, such characteristics as high overloading capability, high-speed operation, high torque density and low inertia are required. The thesis investigates how the dimensioning of a high-performance servomotor differs from the dimensioning of industrial motors. The two most common servomotor types are examined; an induction motor and apermanent magnet synchronous motor. The suitability of these two motor types indynamically demanding servo applications is assessed, and the design aspects that optimize the servo characteristics of the motors are analyzed. Operating characteristics of a high performance motor are studied, and some methods for improvements are suggested. The main focus is on the induction machine, which is frequently compared to the permanent magnet synchronous motor. A 4 kW prototype induction motor was designed and manufactured for the verification of the simulation results in the laboratory conditions. Also a dynamic simulation model for estimating the thermal behaviour of the induction motor in servo applications was constructed. The accuracy of the model was improved by coupling it with the electromagnetic motor model in order to take into account the variations in the motor electromagnetic characteristics due to the temperature rise.

Diseño e implementación de un sistema de control del consumo energético

Implementación de una base de datos transaccional para el control del consumo eléctrico mediante contadores inteligentes. La base de datos propuesta permite desarrollar los diferentes compromisos de gestión de las compañías suministradoras, consumidores, contadores, consumos y núcleos energéticos (smart cities), proporcionando los procedimientos almacenados necesarios para su gestión. También se desarrolla la implementación de una base de datos analítica, data warehouse, para la explotación de los datos almacenados en la primera parte del proyecto. El objetivo es la implementación de las entidades necesarias para la explotación analítica de los datos mediante consultas sencillas.

Oral pathogens in duwl's: risk of infection and strategies for their control

Water lines are an important source of potentíal contamination. Every dental unit is equipped with small-bore flexible plastic tubing to bring water to different hand pieces, such as the air/water syringe, the ultrasonic scaler or the high-speed hand piece. Most dental units are connected directly to municipal distribution systems for potable water and chlorinated or not, this water contains diverse...