Trypsin inhibitory loop is an excellent lead structure to design serine protease inhibitors and antimicrobial peptides

The disulfide-bridged hendecapeptide ( CWTKSIPPKPC) loop, derived from an amphibian skin peptide, is found to have strong trypsin inhibitory capability. This loop, called the trypsin inhibitory loop ( TIL), appears to be the smallest serine protease inhib

Model-based thermoacoustic oscillation control via ℋ ∞ loop-shaping and integral quadratic constraints

Lean premixed prevaporized (LPP) technology has been widely used in the new generation of gas turbines in which reduced emissions are a priority. However, such combustion systems are susceptible to the damage of self-excited oscillations. Feedback control provide a way of preventing such dynamic stabilities. A flame dynamics assumption is proposed for a recently developed unsteady heat release model, the robust design technique, ℋ ∞ loop-shaping, is applied for the controller design and the performance of the controller is confirmed by simulations of the closed-loop system. The Integral Quadratic Constraints(IQC) method is employed to prove the stability of the closed-loop system. ©2010 IEEE.

An analysis of the cooperative mechano-sensitive feedback between intracellular signaling, focal adhesion development, and stress fiber contractility

Cells communicate with their external environment via focal adhesions and generate activation signals that in turn trigger the activity of the intracellular contractile machinery. These signals can be triggered by mechanical loading that gives rise to a cooperative feedback loop among signaling, focal adhesion formation, and cytoskeletal contractility, which in turn equilibrates with the applied mechanical loads. We devise a signaling model that couples stress fiber contractility and mechano-sensitive focal adhesion models to complete this above mentioned feedback loop. The signaling model is based on a biochemical pathway where IP3 molecules are generated when focal adhesions grow. These IP3 molecules diffuse through the cytosol leading to the opening of ion channels that disgorge Ca2+ from the endoplasmic reticulum leading to the activation of the actin/myosin contractile machinery. A simple numerical example is presented where a one-dimensional cell adhered to a rigid substrate is pulled at one end, and the evolution of the stress fiber activation signal, stress fiber concentrations, and focal adhesion distributions are investigated. We demonstrate that while it is sufficient to approximate the activation signal as spatially uniform due to the rapid diffusion of the IP3 through the cytosol, the level of the activation signal is sensitive to the rate of application of the mechanical loads. This suggests that ad hoc signaling models may not be able to capture the mechanical response of cells to a wide range of mechanical loading events. © 2011 American Society of Mechanical Engineers.

Eradication of uneconomical fishes with simple gill nets at Hirakud reservoir

Experiments with simple gill nets of mesh bar 25, 30, 35, 40 and 45 mm were carried out to determine the suitable mesh size for the eradication of the uneconomical fishes of Hirakud reservoir. Results show that net with 25 mm bar is more suitable particularly for Gudusia chapra (Ham), Rohtee cotio (Day) and Eutropichthys vacha (Ham).

Simple and functional photonic devices from printable liquid crystal lasers

In this paper we demonstrate laser emission from emulsion-based polymer dispersed liquid crystals. Such lasers can be easily formed on single substrates with no alignment layers. Remarkably, it is shown that there can exist two radically different laser emission profiles, namely, photonic band-edge lasing and non-resonant random lasing. The emission is controlled by simple changes in the emulsification procedure. Low mixing speeds generate larger droplets that favor photonic band edge lasing with the requisite helical alignment produced by film shrinkage. Higher mixing speeds generate small droplets, which facilitate random lasing by a non-resonant scattering feedback process. Lasing thresholds and linewidth data are presented showing the potential of controllable linewidth lasing sources. Sequential and stacked layers demonstrate the possibility of achieving complex, simultaneous multi-wavelength and "white-light" laser output from a wide variety of substrates including glass, metallic, paper and flexible plastic. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

云南保山猪线粒体DNA D loop区序列初步分析

为了解云南保山猪(Baoshan pig)的遗传多样性及其遗传背景，我们测定了19个个体线粒体DNA Dloop高变区1 1 5 363 - 1 5 801片段序列438帅。检测到1。种单倍型，包括8个多态位点，其中5次T/ C转换、1次G/ A转换、1次G/ C颠换和1次A/ T颠换，其A.T.GX碱基的平均含量分别为35.4%.26.9%.13.2%和24.5 %,A+ T含量(62 .3)明显高于G+ C含量(37 .7 %)。对于保山猪的保种及其持续利用有着重要的理论指导意义。

Characterization of Sarcocystis species in domestic animals using a PCR-RFLP analysis of variation in the 18S rRNA gene: a cost-effective and simple technique for routine species identification

Thirteen restriction endonucleases were used to investigate nucleotide sequence variation in the 18S rRNA DNA of 88 individuals from ten Sarcocystis taxa collected as cysts from their intermediate hosts, swine, cattle and water buffalo. A DNA sequence of

Localization of a novel gene for congenital nonsyndromic simple microphthalmia to chromosome 2q11-14

Microphthalmia is a clinically and genetically heterogeneous disorder of eye development. The genetic basis of nonsyndromic microphthalmia is not yet fully understood. Previous studies indicated that disease pedigrees from different genetic backgrounds co

A simple method of tagging prawns

The recognition of individual animals is crucial to many aspects of research. Prawns (Penaeus monodon) present unique difficulties in this respect since they molt regularly. Thus, almost all tagging and marking methods developed for prawns so far have proven inadequate. Some tags or marks are lost during molting; others cause injury to the prawns. A new and efficient method has been developed at the Igang Seafarming Station of the Aquaculture Department. Rectangular brass tags measuring 5 mm by 20 mm and numbered consecutively are used. The prawn is held gently but firmly at the base of the carapace with the left hand while the right hand slips the brass tag around the stalk of the unablated eye and presses the tag gently. All tagging must be made under water to avoid stress. From May 29 to September 7 1977 to a total of 348 unilaterally-ablated adult female prawns were tagged on the unablated eyestalk in 5 batches to enable individual observations on gonadal maturation, molting, and growth. Periodic examinations were made four times a month to coincide with the different phases of the lunar cycle. On each examination, survival and recovery rates were recorded. The data included death due to immediate mortality during ablation and loss to cannibalism for the duration of the experiments. In all five tagging experiments, most of the prawns recovered had their tags intact. These included even dead and molting animals. The eyestalk tagging method is suitable for prawns because the tags can be attached without causing injury and has no effect on the rate of growth, maturity, molting and behavior of the animal. The tags are identifiable and permanent; they remain attached to the animal even after death.

Use of simple fat analysis for evaluating quality changes in intermediate moisture fish stored at tropical temperature

Changes in the quality of intermediate moisture (IM) fish during storage at 38°C were monitored by assessing the moisture content, pH, acid value, peroxide value and thiobarbituric acid (TBA) value periodically. Results adequately portrayed the hydrolysis and peroxidation of fats and the concomitant protein degradation and crosslinking reactions that have been shown by more sophisticated methods to occur in intermediate moisture fish. Since these changes markedly affect the organoleptic quality, acceptability/shelf-life and nutritive value of IM flesh-foods their predictability by simple fat analytical techniques is of practical value where/when the more sophisticated monitoring techniques are not feasible.

Design, development, and evaluation of a simple blackbody radiative source

This paper presents a simple design and the testing of a blackbody prototype. The physical properties and geometry of the cavity produce a radiator or blackbody with an emissivity greater than 0.99. The prototype has the advantages of having a traditional spherical cavity made of alumina refractory cement and a radiative emission very close to that of an ideal blackbody. The prototype can be used as a calibration standard for other radiation measuring instruments or sensors. Experimental measurements of radiant flux of the prototype measured with a calibrated infrared radiometer and a wide spectrum radiometer are also presented. The prototype is easy to construct and the material required are available to most research centers, laboratories, industries, and universities. © 2010 American Institute of Physics.