Chemical properties of soils treated with biological sludge from gelatin industry

The impact of agro-industrial organic wastes in the environment can be reduced when used in agriculture. From the standpoint of soil fertility, residue applications can increase the organic matter content and provide nutrients for plants. This study evaluated the effect of biological sludge from gelatin industry on the chemical properties of two Ultisols (loamy sand and sandy clay) and an Oxisol (clay). The experiment lasted 120 days and was carried out in laboratory in a completely randomized design with factorial arrangement, combining the three soils and six biological sludge rates (0, 100, 200, 300, 400, and 500 m³ ha-1), with three replications. Biological sludge rates of up to 500 m³ ha-1 decreased soil acidity and increased the effective cation exchange capacity (CEC) and N, Ca, Mg, and P availability, without exceeding the tolerance limit for Na. The increase in exchangeable base content, greater than the effective CEC, indicates that the major part of cations added by the sludge remains in solution and can be lost by leaching.

CHROMIUM IN SOIL ORGANIC MATTER AND COWPEA AFTER FOUR CONSECUTIVE ANNUAL APPLICATIONS OF COMPOSTED TANNERY SLUDGE

Tannery sludge contains high concentrations of inorganic elements, such as chromium (Cr), which may lead to environmental pollution and affect human health The behavior of Cr in organic matter fractions and in the growth of cowpea (Vigna unguiculata L.) was studied in a sandy soil after four consecutive annual applications of composted tannery sludge (CTS). Over a four-year period, CTS was applied on permanent plots (2 × 5 m) and incorporated in the soil (0-20 cm) at the rates of 0, 2.5, 5.0, 10.0, and 20.0 Mg ha-1 (dry weight basis). These treatments were replicated four times in a randomized block design. In the fourth year, cowpea was planted and grown for 50 days, at which time we analyzed the Cr concentrations in the soil, in the fulvic acid, humic acid, and humin fractions, and in the leaves, pods, and grains of cowpea. Composted tannery sludge led to an increase in Cr concentration in the soil. Among the humic substances, the highest Cr concentration was found in humin. The application rates of CTS significantly increased Cr concentration in leaves and grains.

Phosphorus Forms in Ultisol Submitted to Burning and Trituration of Vegetation in Eastern Amazon

ABSTRACT The use of fire to prepare agricultural areas is a technique still used by small farmers in eastern Amazon. This type of management changes the dynamics of soil nutrients, especially phosphorus, which constitutes the most limiting nutrient for crop production in tropical soils. This study was carried out to evaluate changes in phosphorus forms in an Argissolo Amarelo Distrófico (Ultisol) submitted to burning and trituration of secondary forest in eastern Amazon. The evaluated systems were: slash-and-burn of vegetation; slash-and-mulch of vegetation; and secondary vegetation. The labile, moderately labile, moderately recalcitrant, available and total phosphorus fractions were assessed at the soil depths of 0.00-0.05, 0.05-0.10 and 0.10-0.20 m. The results showed a predominance of soluble P in acid (moderately labile P) over other forms in all management systems. The management systems influence the content and distribution of the forms of P, where the slash-and-mulch system presented the prevalence of the labile fraction, and the slash-and-burn system contained less labile forms. The slash-and-mulch system favored the accumulation of labile P and total organic P.

Raw sewage harbors diverse viral populations

At this time, about 3,000 different viruses are recognized, but metagenomic studies suggest that these viruses are a small fraction of the viruses that exist in nature. We have explored viral diversity by deep sequencing nucleic acids obtained from virion populations enriched from raw sewage. We identified 234 known viruses, including 17 that infect humans. Plant, insect, and algal viruses as well as bacteriophages were also present. These viruses represented 26 taxonomic families and included viruses with single-stranded DNA (ssDNA), double-stranded DNA (dsDNA), positive-sense ssRNA [ssRNA(¿)], and dsRNA genomes. Novel viruses that could be placed in specific taxa represented 51 different families, making untreated wastewater the most diverse viral metagenome (genetic material recovered directly from environmental samples) examined thus far. However, the vast majority of sequence reads bore little or no sequence relation to known viruses and thus could not be placed into specific taxa. These results show that the vast majority of the viruses on Earth have not yet been characterized. Untreated wastewater provides a rich matrix for identifying novel viruses and for studying virus diversity.

Reuse of Lime Sludge from Water Softening and Coal Combustion Byproducts, TR-459, 2004

Disposal of lime sludge remains a major challenge to cities in the Midwest. Disposal of lime sludge from water softening adds about 7-10% to the cost of water treatment. Having effective and safe options is essential for future compliance with the regulations of the State of Iowa and within budget restrictions. Dewatering and drying are essential to all reuse applications as this affects transportation costs and utility. Feasibility tests were conducted on some promising applications like SOx control in power generation facilities that burn coal, replacement of limestone as an ingredient in portland cement production, dust control on gravel roads, neutralization of industrial wastewater pH, and combination with fly ash or cement in construction fill applications. A detailed report and analysis of the construction fills application is presented in the second half of the report. A brief discussion of the results directly follows.

Applications for Reuse of Lime Sludge from Water Softening, TR-535, 2005

Lime sludge, an inert material mostly composed of calcium carbonate, is the result of softening hard water for distribution as drinking water. A large city such as Des Moines, Iowa, produces about 30,700 tons of lime sludge (dry weight basis) annually (Jones et al., 2005). Eight Iowa cities representing, according to the United States (U.S.) Census Bureau, 23% of the state’s population of 3 million, were surveyed. They estimated that they collectively produce 64,470 tons of lime sludge (dry weight basis) per year, and they currently have 371,800 tons (dry weight basis) stockpiled. Recently, the Iowa Department of Natural Resources directed those cities using lime softening in drinking water treatment to stop digging new lagoons to dispose of lime sludge. Five Iowa cities with stockpiles of lime sludge funded this research. The research goal was to find useful and economical alternatives for the use of lime sludge. Feasibility studies tested the efficacy of using lime sludge in cement production, power plant SOx treatment, dust control on gravel roads, wastewater neutralization, and in-fill materials for road construction. Applications using lime sludge in cement production, power plant SOx treatment, and wastewater neutralization, and as a fill material for road construction showed positive results, but the dust control application did not. Since the fill material application showed the most promise in accomplishing the project’s goal within the time limits of this research project, it was chosen for further investigation. Lime sludge is classified as inorganic silt with low plasticity. Since it only has an unconfined compressive strength of approximately 110 kPa, mixtures with fly ash and cement were developed to obtain higher strengths. When fly ash was added at a rate of 50% of the dry weight of the lime sludge, the unconfined strength increased to 1600 kPa. Further, friction angles and California Bearing Ratios were higher than those published for soils of the same classification. However, the mixtures do not perform well in durability tests. The mixtures tested did not survive 12 cycles of freezing and thawing and wetting and drying without excessive mass and volume loss. Thus, these mixtures must be placed at depths below the freezing line in the soil profile. The results demonstrated that chemically stabilized lime sludge is able to contribute bulk volume to embankments in road construction projects.

06031-014 City of Carpenter Sewage Treatment System Project Final Report

The Mitchell County Soil and Water Conservation District is applying on behalf of the incorporated community of Carpenter to construct a wastewater collection and treatment system to assist in the environmental cleanup and protection of Deer Creek. IDNR water monitoring of the community tile line has shown consistently elevated levels of fecal coliform bacteria indicating the presence of untreated sewage water. These are obvious health threats to the downstream users and wildlife in Deer Creek and the Cedar River. A new sewer system for the community of Carpenter will eliminate illegal discharges into the creed and be the first step in the overall protection of the stream.

Response to topical clonazepam in patients with burning mouth syndrome: a clinical study

Burning Mouth Syndrome (BMS) is a difficult disease for patients and clinicians. Moreover, there is not a general consensus on how to treat the disease. The main objective of this paper is to evaluate BMS patients' response to topical clonazepam treatment. A double blind study was performed. Among a total of 66 patients, 33 were treated with tablets of clonazepam and another 33 were treated with a placebo. Symptoms were evaluated after 1 month and 6 months of treatment and scored on an analogical scale from 0 to 10. Among the 33 patients treated with clonazepam, 23 showed at least a 50% reduction in symptoms after 1 month of treatment. On the contrary, only 4 in the placebo group exhibited significant improvement. After 6 months, significant differences were observed again, as 23 of the 33 patients treated with the drug reported at least a 50% reduction in symptoms, whereas only 2 among those treated with the placebo significantly improved. However, when measured in terms of a complete cure (lack of symptoms), the differences were not significant: 5 drug-treated patients and one belonging to the placebo group were asymptomatic after one month of treatment. In summary, it seems that clonazepam applied topically was effective in treating BMS in a large proportion of patients

Metsäteollisuuden lietteiden bioterminen kuivaus

Työssä tarkastellaan kompostointiin perustuvaa biotermistä kuivausprosessia, prosessiin vaikuttavia tekijöitä sekä sen soveltuvuutta metsäteollisuuden mekaanisesti kuivatun jätevesilietteen lisäkuivaukseen polttoa varten. Tutkimukseen kuuluvien paperitehtaiden lietteillä suoritettavien biotermisten kuivauskokeiden avulla tutkitaan tehtaiden lietteiden sopivuutta biotermiseen kuivaukseen. Lisäksi tehtaille suunnitellaan kuivauskokeiden ja paperitehtailla tehtävien selvitysten perusteella bioterminen kuivauslaitos. Suomen metsäteollisuus tuottaa nykyisin noin 400 000 – 500 000 kuiva-ainetonnia jätevedenpuhdistamolietteitä vuosittain. Tutkimukseen kuuluvan kahden tehdasintegraatin biologisilla puhdistamoilla syntyvien jätevesilietteiden määrät ovat keskimäärin 33 000 ja 15 000 kuiva-ainetonnia vuodessa. Ongelmana metsäteollisuudessa on jätevesilietteen alhainen kuiva-ainepitoisuus lietteen mekaanisen kuivauksen jälkeen. Tämä vaikeuttaa lietteen polttamista voimalaitoskattilassa ja lietteen poltosta talteen saatavan energian määrä jää vähäiseksi. Mekaanisesti kuivatun sekalietteen käsittely biotermisesti kuivaamalla mahdollistaa lietteen kuiva-ainepitoisuuden nostamisen yli 55 %:in kuiva-ainepitoisuuteen. Tämä helpottaa lietteen polton ongelmia ja kasvattaa lietteen poltosta talteen saatavan energian määrää. Bioterminen kuivaus soveltuu hyvin tutkimukseen kuuluvien tehtaiden sekalietteen kuivaukseen. Suositeltava sekalietteen lähtökuiva-ainepitoisuuden arvo on välillä 30 – 35 % ja tukiaineeksi lisättävän kuoren määrä noin 0,5 m3 yhtä lietekuutiota kohden. Kuivausprosessin kesto on tällöin 10 – 14 vuorokautta, kun haluttu lietepolttoaineen kuiva-ainepitoisuus on vähintään 55 %. Tehtaille suunnitelluissa laitoksissa käsiteltävä lietemäärä on noin 40 000 märkätonnia vuodessa. Tutkimukseen kuuluvalle paperitehtaalle yhdistetyn lietteenkuivausprosessin kustannukset ovat edullisimmat kun liete kuivataan ennen biotermistä kuivausta mekaanisesti 35 %:in kuiva-ainepitoisuuteen. Tällöin lietteenkäsittelyn hinnaksi tulee noin 150 mk/t.

Metsäteollisuuden jätevedenpuhdistamon lietteiden vaihtoehtoiset käsittelymenetelmät.

Työ on tehty osana ympäristöklusterin tutkimusohjelmaa "Materiaalivirrat ja energiankäyttö metsäteollisuusintegraatissa ja niihin liittyvät toimintastrategiat ympäristövaikutuslähtöisesti". Juha Räsänen on tehnyt metsäteollisuuden sivuainevirroista projektissa perusselvityksen, joka on tämän työn pohjana. Työn tavoitteena on ollut selvittää neljän itäsuomalaisen metsäteollisuusintegraatin tapauksissa vaihtoehtoisten lietteenkäsittelymenetelmien tekninen ja taloudellinen soveltuvuus nykyiseen käsittelyyn verrattuna. Tutkimuksessa hyödynnettiin aikaisempia tutkimustuloksia ja eri laitevalmistajien ja metsäteollisuusintegraattien kokemuksia. Työssä esitettäviä arvioita voidaan hyödyntää myös sektoritasolla. Metsäteollisuuden jätevedenpuhdistamon lietteistä käsiteltävyyden kannalta vaativin on bioliete, jonka osuuden kasvaessa perinteinen mekaaninen puristaminen ja poltto vaikeutuvat useilla tehtailla merkittävästikin nykyään ja lähivuosina. Polton ongelmat ja niistä aiheutuva ajoittainen aumakompostointitarve voivat puoltaa joko sekalietteen termistä tai biotermistä kuivausta ennen polttamista. Toinen tapa ratkaista lieteongelma on käsitellä bio- ja primäärilietteet erikseen. Biolietteen lipeälinjakäsittelyssä liete lingotaan, käsitellään mustalipeällä, haihdutetaan ja poltetaan soodakattilassa. Bioliete voidaan myös mädättää ja käsitellä sen jälkeen perinteisessä mekaanisessa puristuksessa. Kaikki käsitellyt menetelmät ovat teknisesti toteutettavissa, kunhan tietyt prosessireunaehdot täyttyvät. Vaihtoehtoiset käsittelymenetelmät vähentävät lietteen jäteluonnetta, mutta vastaavasti kustannukset lisääntyvät usein merkittävästi. Menetelmien käytöstä aiheutuvat integraatin puhdistamolietteen käsittelyn kokonaiskustannukset laskettiin työn osana olevalla taulukkolaskentasovelluksella laitetoimittajien budjettitarjouksia hyödyntäen. Biolietteen poltto soodakattilassa tarjoaa kustannusten kannalta houkuttelevimman ratkaisun. Työhön sisältyvää laskentamenettelyä voidaan soveltaa periaatteessa minkä tahansa metsäteollisuusintegraatin tapaukseen.

Metsäteollisuuden sivuainevirtojen käsittely- ja hyödyntämisvaihtoehtojen vaikutus hiilidioksidipäästöihin

Tämä tutkimus kuuluu ympäristöklusterin tutkimusprojektiin "Materiaalivirrat ja energiankäyttö metsäteollisuusintegraateissa ja niihin liittyvät toimintastrategiat ympäristövaikutuslähtöisesti". Työn päätavoitteena oli kehittää laskentapohja, jossa alkuarvoja muuttamalla voidaan helposti määritellä metsäteollisuuden jäte- eli sivuainevirtojen käsittelystä ja hyötykäytöstä aiheutuvia hiilidioksidivaikutuksia. Tutkimuksen sisältö pohjautuu pääosin projektin muihin tutkimuksiin, joissa on tarkasteltu sivuainevirtojen hyötykäytön teknisiä ja taloudellisia reunaehtoja. Metsäteollisuuden tärkeimmiksi sivuainevirroiksi voidaan määritellä tuhka, soodasakka, jätevedenkäsittelyn liete sekä pastaliete. Tässä tutkimuksessa on laskettu näiden sivuainevirtojen nykyisten käsittelymenetelmien hiilidioksidivaikutukset projektissa mukana olevilla tehtailla ja vertailtu niitä potentiaalisempien uusien käsittely- ja hyötykäyttömenetelmien vaikutuksiin. Työstä saatujen tulosten perusteella voidaan arvioida, että tuhkan osalta hiilidioksidivaikutukset ovat suhteellisen merkityksettömiä. Pastalietteen osalta prosessiin palautus vaikuttaisi parhaalta menetelmältä, koska tuorepastan tuotannosta aiheutuu varsin runsaasti hiilidioksidipäästöjä. Suurin merkitys kokonaispäästöjen kannalta näyttäisi kuitenkin olevan jätevedenkäsittelyn lietteen ja soodasakan käsittelymenetelmillä. Soodasakan orgaaninen aines aiheuttaa kaatopaikoilla suurehkot metaanipäästöt, joita hyötykäytöllä voitaisiin vähentää merkittävästi. Jätevedenkäsittelyn lietteen osalta uudet kuivauksen tehostamismenetelmät parantavat lietteen poltettavuutta, jolloin myös hiilidioksidipäästöt pienenevät. Toisaalta suuremman kuiva-ainepitoisuuden vuoksi myös varastointi voisi olla mahdollista, jolloin lietettä ei tarvitsisi läjittää enää kaatopaikoille, ja myös kaatopaikkapäästöiltä vältyttäisiin.

A subalpine rangeland bird community before and after fire: prescribed burning in the Eastern Pyrenees

High mountain rangelands host important populations of threatened bird species, but can be affected by extensive changes in land use. I studied the breeding bird community of two shrubland plots at 1,850–2,100 m a.s.l. in the Pyrenees. Breeding territories were mapped for four years, before and after the prescribed burning, the aim of which was to increase the grazing value of the study area. The most abundant species (reaching ≥3 breeding pairs/10 ha in at least one plot and one year) were Dunnock Prunella modularis, Dartford Warbler Sylvia undata, Stonechat Saxicola torquatus, Rock Bunting Emberiza cia and Ortolan Bunting E. hortulana. The open-shrubland plot contained a similar number of breeding species (10 vs.9), but a lower overall density (23 vs. 28 breeding pairs/10 ha) than the dense-shrubland plot. Most breeding species alsooccurred in winter. After fire, the number of bird species, overall density and conservation value (an index that takes into account all species’ densities and their categories of conservation concern in Europe) decreased, but tended to recover afterwards. These results may help understand the composition and dynamics of bird assemblages in managed mountain areas

DAI-DEPUR: an integrated and distributed architecture for wastewater treatment plants supervision

The activated sludge process - the main biological technology usually applied towastewater treatment plants (WWTP) - directly depends on live beings (microorganisms), and therefore on unforeseen changes produced by them. It could be possible to get a good plant operation if the supervisory control system is able to react to the changes and deviations in the system and can take thenecessary actions to restore the system’s performance. These decisions are oftenbased both on physical, chemical, microbiological principles (suitable to bemodelled by conventional control algorithms) and on some knowledge (suitable to be modelled by knowledge-based systems). But one of the key problems in knowledge-based control systems design is the development of an architecture able to manage efficiently the different elements of the process (integrated architecture), to learn from previous cases (spec@c experimental knowledge) and to acquire the domain knowledge (general expert knowledge). These problems increase when the process belongs to an ill-structured domain and is composed of several complex operational units. Therefore, an integrated and distributed AIarchitecture seems to be a good choice. This paper proposes an integrated and distributed supervisory multi-level architecture for the supervision of WWTP, that overcomes some of the main troubles of classical control techniques and those of knowledge-based systems applied to real world systems

New methods for the concentration of viruses from urban sewage using quantitative PCR.

Viruses are among the most important pathogens present in water contaminated with feces or urine and represent a serious risk to human health. Four procedures for concentrating viruses from sewage have been compared in this work, three of which were developed in the present study. Viruses were quantified using PCR techniques. According to statistical analysis and the sensitivity to detect human adenoviruses (HAdV), JC polyomaviruses (JCPyV) and noroviruses genogroup II (NoV GGII): (i) a new procedure (elution and skimmed-milk flocculation procedure (ESMP)) based on the elution of the viruses with glycine-alkaline buffer followed by organic flocculation with skimmed-milk was found to be the most efficient method when compared to (ii) ultrafiltration and glycine-alkaline elution, (iii) a lyophilization-based method and (iv) ultracentrifugation and glycine-alkaline elution. Through the analysis of replicate sewage samples, ESMP showed reproducible results with a coefficient of variation (CV) of 16% for HAdV, 12% for JCPyV and 17% for NoV GGII. Using spiked samples, the viral recoveries were estimated at 30-95% for HAdV, 55-90% for JCPyV and 45-50% for NoV GGII. ESMP was validated in a field study using twelve 24-h composite sewage samples collected in an urban sewage treatment plant in the North of Spain that reported 100% positive samples with mean values of HAdV, JCPyV and NoV GGII similar to those observed in other studies. Although all of the methods compared in this work yield consistently high values of virus detection and recovery in urban sewage, some require expensive laboratory equipment. ESMP is an effective low-cost procedure which allows a large number of samples to be processed simultaneously and is easily standardizable for its performance in a routine laboratory working in water monitoring. Moreover, in the present study, a CV was applied and proposed as a parameter to evaluate and compare the methods for detecting viruses in sewage samples.