The OHS regulatory challenges posed by agency workers: evidence from Australia

The purpose of this research is to analyse the problems for occupational health and safety (OHS)regulators posed by agency work/leased labour (also known as labour hire in Australasia), using Australian evidence. The analysis is based on an examination of prosecutions involving labour hire firms along with other documentary records (union, industry and government reports and guidance material). The study also draws on interviews with approximately 200 regulatory officials, employers and union representatives since 2001 and workplace visits with 40 OHS inspectors in 2004‐2005.The triangular relationship entailed in labour leasing, in combination with the temporary nature of most placements, poses serious problems for government agencies in terms of enforcing OHS standards notwithstanding a growing number of successful prosecutions for breaches of legislative duties by host and labour leasing firms. Research to investigate these issues in other countries and compare findings with those for Australia is required, along with assessing the effectiveness of new enforcement initiatives. The paper assesses existing regulatory responses and highlights the need for new regulatory strategies to combat the problems posed by labour. The OHS problems posed by agency work have received comparatively little attention. The paper provides insights into the specific problems posed for OHS regulators and how inspectorates are trying to address them.

Australian health and safety inspectors’ perceptions and actions in relation to changed work arrangements

Extensive international research points to an association between changed work arrangements, especially those commonly labelled as contingent work, with adverse occupational health and safety (OHS) outcomes. Research also indicates these work arrangements have weakened or bypassed existing OHS and workers’ compensation regulatory regimes. However, there has been little if any research into how OHS inspectors perceive these issues and how they address them during workplace visits or investigations. Between 2003 and 2007 research was undertaken that entailed detailed documentary and statistical analysis, extended interviews with 170 regulatory managers and inspectors, and observational data collected while accompanying inspectors on 118 ‘typical’ workplace visits. Key findings are that inspectors responsible for a range of industries see altered work arrangements as a serious challenge, especially labour hire (agency work) and subcontracting. Though the law imposes clear obligations, inspectors identified misunderstanding/blameshifting and poor compliance amongst parties to these arrangements. The complexity of these work arrangements also posed logistical challenges to inspectorates.

How are falls and fear of falling associated with objectively measured physical activity in a cohort of community-dwelling older men?

BACKGROUND: Falls affect approximately one third of community-dwelling older adults each year and have serious health and social consequences. Fear of falling (FOF) (lack of confidence in maintaining balance during normal activities) affects many older adults, irrespective of whether they have actually experienced falls. Both falls and fear of falls may result in restrictions of physical activity, which in turn have health consequences. To date the relation between (i) falls and (ii) fear of falling with physical activity have not been investigated using objectively measured activity data which permits examination of different intensities of activity and sedentary behaviour. METHODS: Cross-sectional study of 1680 men aged 71-92 years recruited from primary care practices who were part of an on-going population-based cohort. Men reported falls history in previous 12 months, FOF, health status and demographic characteristics. Men wore a GT3x accelerometer over the hip for 7 days. RESULTS: Among the 12% of men who had recurrent falls, daily activity levels were lower than among non-fallers; 942 (95% CI 503, 1381) fewer steps/day, 12(95% CI 2, 22) minutes less in light activity, 10(95% CI 5, 15) minutes less in moderate to vigorous PA [MVPA] and 22(95% CI 9, 35) minutes more in sedentary behaviour. 16% (n = 254) of men reported FOF, of whom 52% (n = 133) had fallen in the past year. Physical activity deficits were even greater in the men who reported that they were fearful of falling than in men who had fallen. Men who were fearful of falling took 1766(95% CI 1391, 2142) fewer steps/day than men who were not fearful, and spent 27(95% CI 18, 36) minutes less in light PA, 18(95% CI 13, 22) minutes less in MVPA, and 45(95% CI 34, 56) minutes more in sedentary behaviour. The significant differences in activity levels between (i) fallers and non-fallers and (ii) men who were fearful of falling or not fearful, were mediated by similar variables; lower exercise self-efficacy, fewer excursions from home and more mobility difficulties. CONCLUSIONS: Falls and in particular fear of falling are important barriers to older people gaining health benefits of walking and MVPA. Future studies should assess the longitudinal associations between falls and physical activity.

Double-strand breaks and the concept of short- and long-term epigenetic memory

Double-strand breaks represent an extremely cytolethal form of DNA damage and thus pose a serious threat to the preservation of genetic and epigenetic information. Though it is well-known that double-strand breaks such as those generated by ionising radiation are among the principal causative factors behind mutations, chromosomal aberrations, genetic instability and carcino-genesis, significantly less is known about the epigenetic consequences of double-strand break formation and repair for carcinogenesis. Double-strand break repair is a highly coordinated process that requires the unravelling of the compacted chromatin structure to facilitate repair machinery access and then restoration of the original undamaged chromatin state. Recent experimental findings have pointed to a potential mechanism for double-strand break-induced epigenetic silencing. This review will discuss some of the key epigenetic regulatory processes involved in double-strand break (DSB) repair and how incomplete or incorrect restoration of chromatin structure can leave a DSB-induced epigenetic memory of damage with potentially pathological repercussions

The use of new generation geosynthetics in water treatment

The importance of clean drinking water in any community is absolutely vital if we as the consumers are to sustain a life of health and wellbeing. Suspended particles in surface waters not only provide the means to transport micro-organisms which can cause serious infections and diseases, they can also affect the performance capacity of a water treatment plant. In such situations pre-treatment ahead of the main plant is recommended. Previous research carried out using non-woven synthetic as a pre-filter materials for protecting slow sand filters from high turbidity showed that filter run times can be extended by several times and filters can be regenerated by simply removing and washing of the fabric ( Mbwette and Graham, 1987 and Mbwette, 1991). Geosynthetic materials have been extensively used for soil retention and dewatering in geotechnical applications and little research exists for the application of turbidity reduction in water treatment. With the development of new materials in geosynthetics today, it was hypothesized that the turbidity removal efficiency can be improved further by selecting appropriate materials. Two different geosynthetic materials (75 micron) tested at a filtration rate of 0.7 m/h yielded 30-45% reduction in turbidity with relatively minor head loss. It was found that the non-woven geotextile Propex 1701 retained the highest performance in both filtration efficiency and head loss across the varying turbidity ranges in comparison to other geotextiles tested. With 5 layers of the Propex 1701 an average percent reduction of approximately 67% was achieved with a head loss average of 4mm over the two and half hour testing period. Using the data collected for the Propex 1701 a mathematical model was developed for predicting the expected percent reduction given the ability to control the cost and as a result the number of layers to be used in a given filtration scenario.

Gold nanospikes based microsensor as a highly accurate mercury emission monitoring system

Anthropogenic elemental mercury (Hg0) emission is a serious worldwide environmental problem due to the extreme toxicity of the heavy metal to humans, plants and wildlife. Development of an accurate and cheap microsensor based online monitoring system which can be integrated as part of Hg0 removal and control processes in industry is still a major challenge. Here, we demonstrate that forming Au nanospike structures directly onto the electrodes of a quartz crystal microbalance (QCM) using a novel electrochemical route results in a self-regenerating, highly robust, stable, sensitive and selective Hg0 vapor sensor. The data from a 127 day continuous test performed in the presence of volatile organic compounds and high humidity levels, showed that the sensor with an electrodeposted sensitive layer had 260% higher response magnitude, 3.4 times lower detection limit (,22 mg/m3 or ,2.46 ppbv) and higher accuracy (98% Vs 35%) over a Au control based QCM (unmodified) when exposed to a Hg0 vapor concentration of 10.55 mg/m3 at 1016C. Statistical analysis of the long term data showed that the nano-engineered Hg0 sorption sites on the developed Au nanospikes sensitive layer play a critical role in the enhanced sensitivity and selectivity of the developed sensor towards Hg0 vapor.

Development of the OnTrack Diabetes program

Background: Type 2 diabetes affects an estimated 347 million people worldwide and often leads to serious complications including blindness, kidney disease, and limb amputation. Comorbid dysphoria is common and is an independent risk factor for poor glycaemic control. Professional support for diabetes self-management and dysphoria has limited availability and involves high costs, especially after regular hours, and in rural and remote areas. Web-based cognitive behavior therapy offers highly accessible, acceptable, and cost-effective support for people with diabetes. This paper describes the development of OnTrack Diabetes, a self-guided, Web-based program to promote improved physical and emotional self-management in people with Type 2 diabetes. Objective: The objective of the study is to describe the development of the OnTrack Diabetes program, which is a self-guided, Web-based program aimed to promote euthymia and improved disease self-management in people with Type 2 diabetes. Methods: Semistructured interviews with 12 general practitioners and 13 patients with Type 2 diabetes identified enablers of and barriers to effective diabetes self-management, requirements for additional support, and potential program elements. Existing resources and research data informed the development of content, and consultants from relevant disciplines provided feedback on draft segments and reviewed the program before release. Using a self-guided delivery format contained costs, in addition to adapting program features and modules from an existing OnTrack program. Results: A separate paper describes the protocol for a randomized controlled trial to provide this required evaluation. Conclusions: Development of the OnTrack Diabetes program demonstrates strategies that help ensure that a program is acceptable to users. The next stages involve testing users’ experiences and examining the program’s effectiveness and cost-effectiveness in randomized controlled trials.

Caveating a mortgagee sale - The need for a uniform approach

The ability of a mortgagor to lodge a caveat, where an allegation is raised of serious impropriety by a mortgagee in exercising power of sale, may be a critical protective tool for a mortgagor. The mortgagor’s capacity, as caveator, to lodge a caveat over the mortgagor’s own title and the nature of the interest necessary to support the caveat are contentious issues. This article examines the different judicial approaches that have been adopted to date and states a case for a uniform approach to this issue across Australia in the future.

Causal factors of hot air ballooning incidents : identification, frequency, and potential impact

Background: Hot air ballooning incidents are relatively rare, however, when they do occur they are likely to result in a fatality or serious injury. Human error is commonly attributed as the cause of hot air ballooning incidents; however, error in itself is not an explanation for safety failures. This research aims to identify, and establish the relative importance of factors contributing towards hot air ballooning incidents. Methods: Twenty-two Australian Ballooning Federation (ABF) incident reports were thematically coded using a bottom up approach to identify causal factors. Subsequently, 69 balloonists (mean 19.51 years’ experience) participated in a survey to identify additional causal factors and rate (out of seven) the perceived frequency and potential impact to ballooning operations of each of the previously identified causal factors. Perceived associated risk was calculated by multiplying mean perceived frequency and impact ratings. Results: Incident report coding identified 54 causal factors within nine higher level areas: Attributes, Crew resource management, Equipment, Errors, Instructors, Organisational, Physical Environment, Regulatory body and Violations. Overall, ‘weather’, ‘inexperience’ and ‘poor/inappropriate decisions’ were rated as having greatest perceived associated risk. Discussion: Although errors were nominated as a prominent cause of hot air ballooning incidents, physical environment and personal attributes are also particularly important for safe hot air ballooning operations. In identifying a range of causal factors the areas of weakness surrounding ballooning operations have been defined; it is hoped that targeted safety and training strategies can now be put into place removing these contributing factors and reducing the chance of pilot error.

Transformerless PV inverters - recent test results and a discussion of DC current injection and safety issues

With the variety of PV inverter types and the number of transformerless PV inverters on the Australian market increasing, we revisit some of the issues associated with these topologies. A recent electric shock incident in Queensland (luckily without serious outcome) associated with a transformerless PV system, highlights the need for earthing PV array structures and PV module frames to prevent capacitive leakage currents causing electric shock. The presented test results of the relevant voltages associated with leakage currents of five transformerless PV inverters stress this requirement, which is currently being addressed by both the Clean Energy Council and Standards Australia. DC current injection tests were performed on the same five inverters and were used to develop preliminary recommendations for a more meaningful DC current test procedure for AS4777 Part 2. The test circuit, methodology and results are presented and discussed. A notable temperature dependency of DC current injections with three of the five inverters suggests that DC current injection should be tested at high and low internal inverter temperatures whereas the power dependency noted only for one inverter does not seem to justify recommendations for a (rather involved) standard test procedure at different power levels.

The role of university research centres in building road safety capacity : implications for China

In recent decades, highly motorised countries, such as Australia, have witnessed significant improvements in population health through reductions in fatalities and injuries from road traffic crashes. In Australia, concerted efforts have been made to reduce the road trauma burden since road fatalities reached their highest level in in the early 1970s. Since that time, many improvements have been made drawing on various disciplines to reduce the trauma burden (e.g., road and vehicle design, road user education, traffic law enforcement practices and enforcement technologies). While road fatalities have declined significantly since the mid-1970s, road trauma remains a serious public health concern in Australia. China has recently become the largest car market in the world (Ma, Li, Zhou, Duan, & Bishai, 2012). This rapid motorisation has been accompanied by substantial expansion of the road network as well as a large road trauma burden. Road traffic injuries are a major cause of death in China, reported as accounting for one third of all injury-deaths between 2002 and 2006 (Ma et al., 2012). In common with Australia, China has experienced a reported decline in fatalities since 2002 (see Hu, Wen & Baker, 2008). However, there remains a strong need for action in this area as rates of motorisation continue to climb in China. In Australia, a wide range of organisations have contributed to the improvements in road safety including government agencies, professional organisations, advocacy groups and research centres. In particular, Australia has several highly regarded and multi-disciplinary, university-based research centres that work across a range of road safety fields, including engineering, intelligent transportation systems, the psychology of road user behaviour, and traffic law enforcement. Besides conducting high-quality research, these centres fulfil an important advocacy role in promoting safer road use and facilitating collaborations with government and other agencies, at both the national and international level. To illustrate the role of these centres, an overview will be provided of the Centre for Accident Research and Road Safety-Queensland (CARRS-Q), which was established in 1996 and has gone on to become a recognised world-leader in road safety and injury prevention research. The Centre’s research findings are used to provide evidence-based recommendations to government and have directly contributed to promoting safer road use in Australia. Since 2006, CARRS-Q has also developed strong collaborative links with various universities and organisations in China to assist in building understanding, connections and capacity to assist in reducing the road trauma burden. References Hu, G., Wen, M., Baker, T. D., & Baker, S. P. (2008). Road-traffic deaths in China, 1985–2005: threat and opportunity. Injury Prevention, 14, 149-153. Ma, S., Li, Q., Zhou, M., Duan, L., & Bishai, D. (2012). Road Traffic Injury in China: A Review of National Data Sources. Traffic Injury Prevention, 13(S1), 57-63.

Using digitally distributed vulgar comedy to reach young men with information about healthy sexual development

Focus groups show that young men do not have available to them the same resources to learn about healthy sexual development as do young women. A collaborative project led by a leading provider of sexuality education aimed to reach young men with information about healthy sexual development by using a genre that focus groups showed they favoured - vulgar comedy. This project raised two important issues. First, comedy is ambivalent - it is by definition not serious or worthy. This challenges health communication, which traditionally favours the clear presentation of correct information. Second, vulgarity can be challenging to the institutions of health communication, which can be concerned that it is inappropriate or offensive. This article addresses these issues and reports on the materials that emerged from the project.

Key influences on cycling for transport

Over recent years, the health, transport and environment sectors have been increasingly focused on the promotion of transport cycling. From a health perspective, transport cycling is recognised as a beneficial form of physical activity as it can be easily integrated into daily living, is done at an intensity that confers health benefits, and is associated with reductions in mortality and morbidity [1]. From a safety perspective, the risk of a serious cycling injury decreases as cycling increases [2] as having more cyclists on roads increases motor vehicle drivers’ awareness of cyclists and in turn makes cycling safer. Whereas cycling for recreation is the fourth most commonly reported physical activity among Australian adults [3], transport cycling is an underutilised travel mode. Approximately 1.3% of journeys to work in Australia are made by bicycle [4]. This low prevalence is mirrored in the UK and the US, but not in some European countries like the Netherlands and Denmark, where over 18% and 26%, respectively, of all journeys are made by bicycle [5]. In the past decade, concerted efforts have been made by Australian state and local governments to increase cycling rates [6]. Notably, Melbourne, Sydney and Brisbane have implemented policies, increased bicycle commuting infrastructure, and offered information and promotion programs to encourage commuter cycling [6,7]. Governments have also developed comprehensive longterm plans for guiding future cycling strategies, using lessons learned from around the world in developing successful cycling policy and promotion [6,7]. Changes in transport cycling rates in inner cities since these efforts have been implemented are encouraging. In Sydney, census data indicate an 83% increase in the number of people using a bicycle for commuting between 2001 and 2011 [8]. Counts of bicycles being ridden along major cycling commuter routes indicate increases in weekday morning cycling trips in Brisbane (63% increase from 2004 to 2010) [7] and in Melbourne (a 43% increase from 2006 to 2008) [9]. However, bicycle mode share to work has changed little: for example, between 2001 and 2011, it decreased slightly from 1.6% to 1.3% in Brisbane [10,11]. Researchers have been investigating factors that may be contributing to low rates of cycling for transport, to inform future policy and programming to encourage transport cycling. The aim of this paper is to overview our work to date in this area of research in Queensland.

Virtual 3D models of insects for accelerated quarantine control

We learn from the past that invasive species have caused tremendous damage to native species and serious disruption to agricultural industries. It is crucial for us to prevent this in the future. The first step of this process is to identify correctly an invasive species from native ones. Current identification methods, relying on mainly 2D images, can result in low accuracy and be time consuming. Such methods provide little help to a quarantine officer who has time constraints to response when on duty. To deal with this problem, we propose new solutions using 3D virtual models of insects. We explain how working with insects in the 3D domain can be much better than the 2D domain. We also describe how to create true-color 3D models of insects using an image-based 3D reconstruction method. This method is ideal for quarantine control and inspection tasks that involve the verification of a physical specimen against known invasive species. Finally we show that these insect models provide valuable material for other applications such as research, education, arts and entertainment. © 2013 IEEE.

A Likelihood-Maximizing Framework for Enhanced In-Car Speech Recognition Based on Speech Dialog System Interaction

Speech recognition in car environments has been identified as a valuable means for reducing driver distraction when operating noncritical in-car systems. Under such conditions, however, speech recognition accuracy degrades significantly, and techniques such as speech enhancement are required to improve these accuracies. Likelihood-maximizing (LIMA) frameworks optimize speech enhancement algorithms based on recognized state sequences rather than traditional signal-level criteria such as maximizing signal-to-noise ratio. LIMA frameworks typically require calibration utterances to generate optimized enhancement parameters that are used for all subsequent utterances. Under such a scheme, suboptimal recognition performance occurs in noise conditions that are significantly different from that present during the calibration session – a serious problem in rapidly changing noise environments out on the open road. In this chapter, we propose a dialog-based design that allows regular optimization iterations in order to track the ever-changing noise conditions. Experiments using Mel-filterbank noise subtraction (MFNS) are performed to determine the optimization requirements for vehicular environments and show that minimal optimization is required to improve speech recognition, avoid over-optimization, and ultimately assist with semireal-time operation. It is also shown that the proposed design is able to provide improved recognition performance over frameworks incorporating a calibration session only.