Une comparaison des journaux non structurés et des journaux structurés rédigés par les étudiants en hygiène dentaire

The Canadian Dental Hygienists Association (CDHA) has indicated that there is a need for research in education in the field of dental hygiene. It seems that when compared to the nursing profession, the profession of dental hygiene is only in the earliest stages of investigating ways of teaching critical thinking. The faculty of the dental hygiene program at John Abbott College has always valued the skill of self-assessment in the students, yet there are few specific learning activities provided whereby the students can learn how to perfect and work on this invaluable skill of self-reflection in order to better self-assess. Although self-assessment is required of the students upon the completion of each clinical experience in Clinic 1, 2 and 3, a modest amount of clinical time is allotted to reflect upon this most important skill. It appears that more could be done to prepare our students to assess their learning and clinical practice. Self-reflection as an essential element of practice has a valid place in professional education. The purpose of conducting this study was to find out whether unstructured or structured self-reflective journal writing is a sound pedagogical technique to encourage dental hygiene students’ self-assessment through self-reflection. The research design for the project was a single case study. The paradigm for the study was chosen with a purposeful selection of participants, involving twenty-seven, third-year dental hygiene students at John Abbott College. The students were arbitrarily enrolled in two sections, which for the purpose of this study were referred to as Group A and Group B. Three duplicated coded anonymous journal entries from each student were collected over a ten-week period during the Fall 2009 semester. To examine the students’ level of self-reflection, two methods were used. First a content analysis of reflective journals was used to ascertain the level and substance of the reflections from their clinical experiences with the intent of looking more specifically at the students’ self-assessment. The journal entries were coded and analyzed after the grades were submitted at the end of the school term. This was followed by the distribution of an anonymous questionnaire to the students in both sections. The responses of the questionnaire were tabulated and analyzed. An analysis was done on the data collected in order to determine whether age, education and or mother tongue of the students in both Groups A and B had an influence on their perceptions of journal writing, as well as the student’s opinions about the value of journal writing. This questionnaire included two open-ended questions to assist in gathering additional data on the student’s thoughts on writing journals. A content analysis of the qualitative data collected from the open-ended questions in the questionnaire was also analyzed. Results indicated there were very few differences in the level of self-reflection leading to self-assessment. However, students in Group B who were assigned structured journals showed more evidence of deeper learning. Taken as a whole, the journal entries clearly showed the students were involved in ‘reflection-on-action’ of their clinical experiences (Schon 1987, as cited in Asadoorian & Batty, 2005). The quality of the responses for the most part indicated the students took the time and effort to record their perceptions of their clinical experiences. It is important to note that the results do indicate that students did show a need to self-reflect and assess. The students did in fact validate the importance of reflection through journal writing, even though they did not particularly like it as an added assignment. The journals were found to be very helpful to the research in getting to know what the issues were that held the students’ attention. They explained how and to what extent the students developed relationships with their clients. It was obvious that clinicians have an impact and influence on student learning. The students value the help, role modeling, patience, encouraging words and or gestures, positive reinforcement, and understanding provided by their clinicians. This research provides some evidence that students do believe that self-reflection through structured journal writing helped them better prepare for future clinical sessions with their clients. Our goal as educators should be to encourage dental hygiene students to self-assess through written self-reflection as an established practice for deeper learning.

Product/Brand co-creation methodology crossing marketing, design thinking, creativity and management: ideas(r)evolution

This thesis introduce a new innovation methodology called IDEAS(R)EVOLUTION that was developed according to an on-going experimental research project started in 2007. This new approach to innovation has initial based on Design thinking for innovation theory and practice. The concept of design thinking for innovation has received much attention in recent years. This innovation approach has climbed from the design and designers knowledge field towards other knowledge areas, mainly business management and marketing. Human centered approach, radical collaboration, creativity and breakthrough thinking are the main founding principles of Design thinking that were adapted by those knowledge areas due to their assertively and fitness to the business context and market complexity evolution. Also Open innovation, User-centered innovation and later on Living Labs models emerge as answers to the market and consumers pressure and desire for new products, new services or new business models. Innovation became the principal business management focus and strategic orientation. All this changes had an impact also in the marketing theory. It is possible now to have better strategies, communications plans and continuous dialogue systems with the target audience, incorporating their insights and promoting them to the main dissemination ambassadors of our innovations in the market. Drawing upon data from five case studies, the empirical findings in this dissertation suggest that companies need to shift from Design thinking for innovation approach to an holistic, multidimensional and integrated innovation system. The innovation context it is complex, companies need deeper systems then the success formulas that “commercial “Design thinking for innovation “preaches”. They need to learn how to change their organization culture, how to empower their workforce and collaborators, how to incorporate external stakeholders in their innovation processes, hoe to measure and create key performance indicators throughout the innovation process to give them better decision making data, how to integrate meaning and purpose in their innovation philosophy. Finally they need to understand that the strategic innovation effort it is not a “one shot” story it is about creating a continuous flow of interaction and dialogue with their clients within a “value creation chain“ mindset; RESUMO: Metodologia de co-criação de um produto/marca cruzando Marketing, Design Thinking, Criativity and Management - IDEAS(R)EVOLUTION. Esta dissertação apresenta uma nova metodologia de inovação chamada IDEAS(R)EVOLUTION, que foi desenvolvida segundo um projecto de investigação experimental contínuo que teve o seu início em 2007. Esta nova abordagem baseou-se, inicialmente, na teoria e na práctica do Design thinking para a inovação. Actualmente o conceito do Design Thinking para a inovação “saiu” do dominio da area de conhecimento do Design e dos Designers, tendo despertado muito interesse noutras áreas como a Gestão e o Marketing. Uma abordagem centrada na Pessoa, a colaboração radical, a criatividade e o pensamento disruptivo são principios fundadores do movimento do Design thinking que têm sido adaptados por essas novas áreas de conhecimento devido assertividade e adaptabilidade ao contexto dos negócios e à evolução e complexidade do Mercado. Também os modelos de Inovação Aberta, a inovação centrada no utilizador e mais tarde os Living Labs, emergem como possiveis soluções para o Mercado e para a pressão e desejo dos consumidores para novos productos, serviços ou modelos de negócio. A inovação passou a ser o principal foco e orientação estratégica na Gestão. Todas estas mudanças também tiveram impacto na teoria do Marketing. Hoje é possivel criar melhores estratégias, planos de comunicação e sistemas continuos de diálogo com o público alvo, incorporando os seus insights e promovendo os consumidores como embaixadores na disseminação da inovação das empresas no Mercado Os resultados empiricos desta tese, construídos com a informação obtida nos cinco casos realizados, sugerem que as empresas precisam de se re-orientar do paradigma do Design thinking para a inovação, para um sistema de inovação mais holistico, multidimensional e integrado. O contexto da Inovação é complexo, por isso as empresas precisam de sistemas mais profundos e não apenas de “fórmulas comerciais” como o Design thinking para a inovação advoga. As Empresas precisam de aprender como mudar a sua cultura organizacional, como capacitar sua força de trabalho e colaboradores, como incorporar os públicos externos no processo de inovação, como medir o processo de inovação criando indicadores chave de performance e obter dados para um tomada de decisão mais informada, como integrar significado e propósito na sua filosofia de inovação. Por fim, precisam de perceber que uma estratégia de inovação não passa por ter “sucesso uma vez”, mas sim por criar um fluxo contínuo de interação e diálogo com os seus clientes com uma mentalidade de “cadeia de criação de valor”

Try thinking like a tree

Reflections on the value of experimente over project on architecture thinking. An essay on the operativity of the notions of: "Collections"; "Tools"; "Instructions"; "Walks" and "reCollections"

Measuring with our memory, Thinking with our feet: Patrick Geddes and Richard Serra, two worldviews with walking in the centre

A reflection on the relevance of the experience of walking in the production and thinking of a pioneer urban planer, such as Patrick Geddes, and a pioneer landscape artist, such as Richard Serra. Despite the fact that are two unknown visions one from the other, and dispite the fact that are territorialy apart and scientifically apart, also, the subjectivity of the dimension of the experience of the body when walkin a place, have sparkling similarities.

System innovation and life cycle thinking in packaging value chain: the circularity of plastics.

Compared to other, plastic materials have registered a strong acceleration in production and consumption during the last years. Despite the existence of waste management systems, plastic_based materials are still a pervasive presence in the environment, with negative consequences on marine ecosystem and human health. The recycling is still challenging due to the growing complexity of product design, the so-called overpackaging, the insufficient and inadequate recycling infrastructure, the weak market of recycled plastics and the high cost of waste treatment and disposal. The Circular economy package, the European Strategy for plastics in a circular economy and the recent European Green Deal include very ambitious programmes to rethink the entire plastic value chain. As regards packaging, all plastic packaging will have to be 100% recyclable (or reusable) and 55% recycled by 2030. Regions are consequently called upon to set up a robust plan able to fit the European objectives. It takes on greater importance in Emilia Romagna where the Packaging valley is located. This thesis supports the definition of a strategy aimed to establish an after-use plastics economy in the region. The PhD work has set the basis and the instruments to establish the so-called Circularity Strategy with the aim to turn about 92.000t of plastic waste into profitable secondary resources. System innovation, life cycle thinking and participative backcasting method have allowed to deeply analyse the current system, orientate the problem and explore sustainable solutions through a broad stakeholder participation. A material flow analysis, accompanied by a barrier analysis, has supported the identification of the gaps between the present situation and the 2030 scenario. Eco-design for and from recycling (and a mass _based recycling rate (based on the effective amount of plastic wastes turned into secondary plastics), valorized by a value_based indicator, are the key-points of the action plan.

Life Cycle Thinking for sustainability assessment and decision-making in selected food supply chains in Costa Rica

The Agenda 2030 contains 17 integrated Sustainable Development Goals (SDGs). SDG 12 for Sustainable Consumption and Production (SCP) promotes the efficient use of resources through a systemic change that decouples economic growth from environmental degradation. The Food Systems (FS) pillar in SDG 12 entails paramount relevance due to its interconnection to many other SDGs, and even when being a crucial world food supplier, the Latin American and Caribbean (LAC) Region struggles with environmental and social externalities, low investment in agriculture, inequity, food insecurity, poverty, and migration. Life Cycle Thinking (LCT) was regarded as a pertinent approach to identify hotspots and trade-offs, and support decision-making process to aid LAC Region countries as Costa Rica to diagnose sustainability and overcome certain challenges. This thesis aimed to ‘evaluate the sustainability of selected products from food supply chains in Costa Rica, to provide inputs for further sustainable decision-making, through the application of Life Cycle Thinking’. To do this, Life Cycle Assessment (LCA), Life Cycle Costing (LCC), and Social Life Cycle Assessment (S-LCA) evaluated the sustainability of food-waste-to-energy alternatives, and the production of green coffee, raw milk and leafy vegetables, and identified environmental, social and cost hotspots. This approach also proved to be a useful component of decision-making and policy-making processes together with other methods. LCT scientific literature led by LAC or Costa Rican researchers is still scarce; therefore, this research contributed to improve capacities in the use of LCT in this context, while offering potential replicability of the developed frameworks in similar cases. Main limitations related to the representativeness and availability of primary data; however, future research and extension activities are foreseen to increase local data availability, capacity building, and the discussion of potential integration through Life Cycle Sustainability Assessment (LCSA).

Ottimizzazione, Standardizzazione e Innovazione Tecnologica del ciclo produttivo mediante i principi del Lean Thinking

Obiettivo di questo elaborato è fornire alle aziende operanti sul mercato nella realtà industriale, una trattazione dei temi relativi alla standardizzazione e ottimizzazione dei processi di produzione, didatticamente semplice e fortemente orientata all’applicazione, centrata sui criteri di ricerca della massima efficienza tecnica ed economica del prodotto. La trattazione, corredata, ovunque possibile, di approcci quantitativi supportati da idonei strumenti matematici, vuole offrire per ogni tipo di azienda che operi sul mercato una traccia semplice e chiara in merito ad un tema estremamente attuale, relativo all'ottimizzazione e standardizzazione del processo produttivo, per salvaguardare il proprio vantaggio competitivo e aumentare la robustezza e capacità di far fronte a ogni tipo di minaccia esterna e/o interna potenzialmente verificabile in futuro. Infatti, il prodotto finale di tale attività di analisi, volta alla riduzione degli sprechi, mantenendo fisso il prezzo di vendita si tramuta quindi in un incremento dei margini di ricavo su ogni unità di vendita. Da ultimo, con la parte finale dell’elaborato è mia intenzione veicolare e far comprendere l’importanza e i vantaggi connessi all'introduzione ponderata dell’automazione anche all'interno di un contesto aziendale con lavorazioni altamente specifiche e variegate. È fondamentale per la sopravvivenza delle aziende nel contesto competitivo globale automatizzare le lavorazioni ripetitive a bassa creazione di valore aggiunto, realizzando in questo modo economie di scala. La manodopera specializzata deve essere razionalizzata e utilizzata esclusivamente per le lavorazioni complesse, distintive e rappresentative della grande competenza e affidabilità proprie dell’industria italiana.

Progettare l'inserimento di General Purpose Technologies nelle Organizzazioni con il Design Thinking: evidenze dal campo e metodologia proposta

Vista la crescente necessità di svolgere progetti d'innovazione guidati dalle nuove tecnologie, la presente ricerca risponde all'esigenza di trovare una metodologia efficace per poterli affrontare proficuamente. In un primo momento, l'elaborato propone una metodologia che permette di elaborare una classificazione dei progetti d'innovazione technology-driven in classi ed un pacchetto di tools funzionali al riconoscimento dell'appartenenza alle stesse. In un secondo momento, giunti a comprensione del fatto che ad ognuna delle classi corrisponde uno specifico fine raggiungibile con una specifica metodologia, lo studio descrive la metodologia seguita per raggiungere una efficace e ripetibile elaborazione di principi progettuali, buone pratiche e strumenti che permettano ad una Organizzazione di appropriarsi del valore di una tecnologia General Purpose (GPT) attraverso l'ideazione di soluzioni innovativa. La progettazione è figlia di un approccio di Design Thinking (DT), sia poichè esso è stato usato nello svolgimento stesso della ricerca, sia perchè la metodologia DT è alla base della modellazione del processo proposto per la classe.

Collaborative technologies, higher order thinking and self-sufficient learning: A case study of adult learners

The inclusion of online elements in learning environments is becoming commonplace in Post Compulsory Education. A variety of research into the value of such elements is available, and this study aims to add further evidence by looking specifically at the use of collaborative technologies such as online discussion forums and wikis to encourage higher order thinking and self-sufficient learning. In particular, the research examines existing pedagogical models including Salmon’s five-stage model, along with other relevant literature. A case study of adult learners in community-based learning centres forms the basis of the research, and as a result of the findings, an arrow model is suggested as a framework for online collaboration that emphasises the learner, mentions pre-course preparation and then includes three main phases of activity: post, interact and critique. This builds on Salmon’s five-stage model and has the benefit of being flexible and responsive, as well as allowing for further development beyond the model, particularly in a blended learning environment.

Prosperity Thinking in Action: a case study from Future Food Institute’s Paideia Campus

The need for sustainable economic growth and environmental stewardship emerged around the start of the twentieth century when society became aware that the traditional development model would lead to the collapse of the terrestrial ecosystem in the long run. Over the years, the international community's environmental efforts have demonstrated unequivocally that the planet's limits are real. And so, the new development approach has laid the groundwork for the future. According to this model, design also plays a key role in ensuring a better future. The design has undergone an ecological and sustainable evolution as a result of the global environmental crisis and the degradation of our ecosystem and biodiversity. In this contest, Prosperity Thinking is inserted, a still evolving methodology developed by the Future Food Institute starting from 2019. The main concepts on which it is based are described, as well as the method that identifies it, which is divided into the following stages: 1) Problem Framing 2) Ideation and Prototyping 3) Test & Analyze. The development of the prosperity thinking toolkit is described, beginning with the search for tools from the literature on sustainable design and ending with its validation with the help of design experts. The testing of some tools will be recounted during a workshop organized by FFI, in which 15 people ranging in age from 14 to 40 will participate, and then the final version of the toolkit will be presented which has been obtained by adding to it the tools proposed by the experts. Finally, a reflection on the future of Prosperity Thinking, a method in constant evolution that must continue to follow societal and environmental changes in order to respond to the ever-increasingly complex challenge of sustainability.

Integrare gli approcci all'innovazione Data Science e Design Thinking: analisi teorica e applicazione al caso della sanità parmense

Nel panorama aziendale odierno, risulta essere di fondamentale importanza la capacità, da parte di un’azienda o di una società di servizi, di orientare in modo programmatico la propria innovazione in modo tale da poter essere competitivi sul mercato. In molti casi, questo e significa investire una cospicua somma di denaro in progetti che andranno a migliorare aspetti essenziali del prodotto o del servizio e che avranno un importante impatto sulla trasformazione digitale dell’azienda. Lo studio che viene proposto riguarda in particolar modo due approcci che sono tipicamente in antitesi tra loro proprio per il fatto che si basano su due tipologie di dati differenti, i Big Data e i Thick Data. I due approcci sono rispettivamente il Data Science e il Design Thinking. Nel corso dei seguenti capitoli, dopo aver definito gli approcci di Design Thinking e Data Science, verrà definito il concetto di blending e la problematica che ruota attorno all’intersezione dei due metodi di innovazione. Per mettere in evidenza i diversi aspetti che riguardano la tematica, verranno riportati anche casi di aziende che hanno integrato i due approcci nei loro processi di innovazione, ottenendo importanti risultati. In particolar modo verrà riportato il lavoro di ricerca svolto dall’autore riguardo l'esame, la classificazione e l'analisi della letteratura esistente all'intersezione dell'innovazione guidata dai dati e dal pensiero progettuale. Infine viene riportato un caso aziendale che è stato condotto presso la realtà ospedaliero-sanitaria di Parma in cui, a fronte di una problematica relativa al rapporto tra clinici dell’ospedale e clinici del territorio, si è progettato un sistema innovativo attraverso l’utilizzo del Design Thinking. Inoltre, si cercherà di sviluppare un’analisi critica di tipo “what-if” al fine di elaborare un possibile scenario di integrazione di metodi o tecniche provenienti anche dal mondo del Data Science e applicarlo al caso studio in oggetto.

[the Teaching Of Social Sciences In Health: Between Practice And Theory].

The models of teaching social sciences and clinical practice are insufficient for the needs of practical-reflective teaching of social sciences applied to health. The scope of this article is to reflect on the challenges and perspectives of social science education for health professionals. In the 1950s the important movement bringing together social sciences and the field of health began, however weak credentials still prevail. This is due to the low professional status of social scientists in health and the ill-defined position of the social sciences professionals in the health field. It is also due to the scant importance attributed by students to the social sciences, the small number of professionals and the colonization of the social sciences by the biomedical culture in the health field. Thus, the professionals of social sciences applied to health are also faced with the need to build an identity, even after six decades of their presence in the field of health. This is because their ambivalent status has established them as a partial, incomplete and virtual presence, requiring a complex survival strategy in the nebulous area between social sciences and health.

Juan César García: Social Medicine As Project And Endeavor.

This paper analyses some aspects of the trajectory of the Argentinian physician and sociologist Juan César García (1932-1984) in the field of Latin American Social Medicine. Three dimensions constituting his basic orientations are highlighted: the elaboration of systematic and reflective social thought; a critical attitude in questioning teaching and professional practices; a commitment to the institutionalization and dissemination of health knowledge.

Modelos organizadores do pensamento: uma perspectiva de pesquisa sobre o raciocínio moral com adolescentes autores de infração

This article has the aim to expand the perspective of research in the field of morality. We present a proposal of morality study of outlaw teenagers according to Thinking Organizer Models Theory. Through the idea of complexity we search to understand the cognitive process in the elaboration of moral reasoning inside situations of conflict. With this perspective, we developed a research that aimed to identify which organizer models were applied by 20 outlaw male teenagers who abide by social punishment to solve the hypothetical moral conflicts. Through interviews we told them a situation of moral conflict that involved friendship relation, physical aggression and steal. We could identified several models which were joined in three categories. Such models reflected the diversity and regularity that are present inside the elaborated reasoning to solve the conflicts shown by us. We conclude that the diversity of organizer models identified shows the importance of the contents in the construction of moral reasoning.

Escola, democracia e a construção de personalidades morais

This article intends to discuss the relationship between morality, democracy and education within the perspective of the complex thinking, pointing to paths and proposals for its effective implementation in the educational routine, under the conviction that this is an imperative of the new social demands presented to the contemporary schooling. Understanding that one of the purposes of education is the ethical development, the author proposes intentional actions such that through them the school practices can offer to the subjects of education the necessary tools to build their cognitive, affective, cultural, and organic competence, thereby enabling them to act morally in the world. To that effect, seven aspects of school reality that hamper or contribute to school democratization are identified and discussed, which must be understood from the paradigm of complexity: school contents, classroom methodology, the nature of interpersonal relationships, the values, self-esteem and self-knowledge of the school community, as well as the school management processes.