Efeito do tratamento alcalino da fibra na resistência mecânica do compósito epóxi/capim-sapê

Due to growing concerns for reducing environmental damage caused by the use of non-renewable raw materials, there is a growing demand for research related to aggregate technology with environmental preservation. Thus, the use of non-renewable materials and less aggressive materials has been gaining attention. About composite materials, the exchange of synthetic fibers by natural fibers, especially vegetable fiber as reinforcement, has been increasing, due to its physical-chemical properties such as mechanical strength, nontoxic, low cost, low density, processing flexibility, non-abrasive to the process equipment, requiring simple surface treatments, etc. This objective was to process composites reinforced with long fibers of sapegrass in epoxy matrix and characterize the composites through mechanical tests. Three groups of composites were prepared according to the treatment received by the reinforcement: without treatment, alkali treatment at concentration of 5% w/v and alkali treatment at 10% w/v concentration. The materials were analyzed by tensile and flexural, and tests also optical microscopy and scanning electron microscopy (SEM). The results were statistically analyzed. As the main result, the alkali treatment of 5% in the sapegrass fibers increases the tensile and flexural strength, as a consequence of the improve adhesion between matrix and reinforcement

Estudo comparativo das madeiras de cecropia palmata (imbaúba) e eucalyptus grandis para produção de celulose e papel

Pós-graduação em Ciência Florestal - FCA

Distribuição espacial e determinação da depreciação quantitativa e qualitativa causada por Tetranychus ogmophallos (Acari: Tetranychidae) ao amendoinzeiro

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Reabilitação estética do sorriso por meio do sistema cerâmico dissilicato de lítio: relato de caso

The reestablishment of a harmonious smile through dental ceramics, when properly conducted and with specific indications, can achieve extremely predictable results. For aesthetic and functional rehabilitation, many ceramic materials can be used such as zirconia, leucite, alumina, feldspar, and lithium disilicate. Among these materials the lithium disilicate stands out due to the following characteristics: its resistance to wear, to chemical attack, high temperatures and oxidation; low electrical conductivity; near zero thermal expansion; good optical properties and biocompatibility with periodontal; excellent esthetics; color stability and reinforcement of tooth structure. The indications for the use of lithium disilicate are not limited to multiple facets of teeth in cases where there was no favorable response to tooth whitening, and also comprehend teeth with multiple restorations, diastema closure, shape alteration, and dental contouring, replacement of missing or fractured teeth, among others. The versatility of lithium disilicate ceramics allows its utilization in several clinical situations. The concomitant use of lithium disilicate for veneers and over metal has satisfactory aesthetic results, as reported in the present studying cases that require both aesthetics and resistance.

Influência de variações das normas estéticas na atratividade do sorriso

The work presented here aims to evaluate how aesthetic norm variations influence the perception of attractiveness of a smile according to dentists and laymen. Methods: The smiles in photographs of a man and a woman were digitally changed. Eleven smiles were created for each one: an ideal, control smile - an ideal smile according to accepted norms - and 10 smiles containing individual variations of each of the following norms: a) 2mm and 3mm deviations from the middle line; b) the contour of the smile - contour of a straight smile and contour of a reverse smile; c) the angle of the lateral incisors - a mesial angle of 10° and a distal angle of 10°; d) 0.5mm and 1mm diastema; and e) dental proportion - Alber’s Proportion and Plato’s Proportion. The photographs were evaluated by two specialists in cosmetic dentistry and two laymen using the visual analogue scale. Results: The ideal smile for both genders was well accepted by both the specialists and the laymen. The opinions on the smiles with aesthetic variations varied, some were more positive than others, some were in agreement and some were in disagreement. Conclusion: The absence of deviations favors the perceived beauty of a smile, but some aesthetic variations seem to be better accepted than others. The success of aesthetic treatments depends on the active participation of dentists and patients in the planning stage.

Descriptive study of onychomycosis in a hospital in São Paulo

Onychomychosis, a nail fungus infection is the most frequent nail ailment, constituting about half of all nail disorders. It can be caused by dermatophytes, non-dermatophytes, yeasts and Prothoteca spp. Methods include 5407 samples of patients with suspected onychomycosis, studied from January 2002 to December 2006, by direct mycological examination and fungi culture. The diagnosis of onychomycosis was confirmed in samples from 3822 direct mycological and/or culture positive. The diagnosis was established by culture for fungi. Among the 1.428 identified agents, the dermatophytes were responsible for 68.6% (N = 980) of cases, followed by yeasts with 27.6% (N = 394), non-dermatophytes fungi with 2.2% (N = 31), Prothoteca spp with 0.1% (N = 2), and associations with 1.5% (N = 22). Females were more affected, with 66% (N = 2527) of cases, and the most affected age group ranged from 31 to 60 years of age (median 47 years). Fungal microbiota is often changed in the world, both quantitatively and qualitatively, and is affected by several environmental factors. Thus, the periodic review of the composition of this microbiota is important to evaluate the epidemiology and thus proportion a better therapeutic response.

Efeitos da somatotropina recombinante bovina na taxa de concepção, composição celular do corpo lúteo e morfometria das glândulas endometriais em vacas de corte

Pós-graduação em Ciência Animal - FMVA

Oxygen mobility in Bi:Sr:Ca:Cu:O ceramic measured using anelastic relaxation methods

Since the discovery of YBaCuO, experiments have shown that its superconducting properties are strongly affected by the oxygen content. More recently, anelastic relaxation measurements in La2CuO4+δ, showed that the decrease in the oxygen content can be related to two events. One is the decrease in mobility between two adjacent CuO planes, and the other is the increase in the number of tilting patterns of the CuO6 octahedra. In the case of the bismuth-based ceramic, it is known that the oxygen content, within some limits, does not affect its superconducting properties. In order to evaluate the mobility and the effect of the oxygen content on this material we have prepared BSCCO ceramic and tested regarding its internal friction and electrical resistivity as a function of the temperature while the oxygen content was being reduced by a sequence of vacuum annelaing at 620 K. The samples were prepared in the Bi:Sr:Ca:Cu = 2212 and 2223 proportion, using powder obtained by the sol-gel route and conventional solid state reaction. The anelastic relaxation measurements were performed using a torsion pendulum operating with frequency about 15-35 Hz between 77 to 700 K. The diffraction pattern of the as sintered and the vacuum annealed material were also presented. The results have shown complex anelastic relaxation structures that were associated to the jump of interstitial oxygen atoms between two adjacent CuO planes. The vacuum annealing showed to be deleterious to the critical temperature of the superconducting ceramic.

Características da carcaça e alometria dos tecidos de cabritos F1 Boer × Saanen

Com o objetivo de avaliar as características de carcaça e a alometria dos cortes comerciais e dos tecidos de cabritos F1 Boer × Saanen, 35 animais foram abatidos ao atingirem 5, 10, 15, 20 e 25 kg de peso vivo (PV). A dieta dos animais foi composta de leite de vaca nos primeiros 49 dias e ração à vontade do sétimo dia até o abate. Os cortes foram obtidos após o resfriamento da carcaça e a perna foi dissecada em músculo, osso e gordura. O PV teve efeito linear decrescente no rendimento de carcaça fria e na área de olho-de-lombo por kg de carcaça. Os pesos de perna, paleta e pescoço em relação à carcaça fria decresceram linearmente, mas houve efeito quadrático sobre o rendimento de costelas e lombo. O crescimento de paleta, pescoço e perna foi isométrico (b=1) ao do corpo, enquanto o das costelas e do lombo foi mais lento (b¹ 1). Os músculos da perna cresceram igualmente, a gordura mais lenta e os ossos mais rapidamente que a perna, enquanto o desenvolvimento da gordura subcutânea foi mais tardio que o da intermuscular. Para obtenção de carcaça de 8 a 11 kg com rendimento superior a 44%, boa proporção de músculo e gordura com menor perda durante o resfriamento, recomenda-se abater os animais com PV entre 20 e 25 kg, mas, se o objetivo for carcaça de menor peso, o abate dos animais deve ser feito ao final do aleitamento com aproximadamente 10 kg de peso corporal.

Espectro de gotas e potencial de deriva de caldas contendo o herbicida 2,4-d amina em misturas em tanque

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Imunohistoquímica em órgãos de tilápias-do-Nilo imunizadas com antígeno insolúvel de Streptococcus agalactiae

Pós-graduação em Medicina Veterinária - FCAV

Proporção tecidual da perna de caprinos jovens em função do grupo racial, peso de abate e sexo

To evaluate the effect of breed group, slaughter weight and sex on tissue proportion of the leg and muscle, bone and fat ratio in confined kids, seventy-four goats of both sex were used and divided among breed groups: Alpine (A), ½ Nubian + ½ Alpine (½ ANA), ½ Boer + ½ Alpine (½ BA), ¾ Boer + ¼ Alpine (¾ BA) and ½ Nubian + ¼ Alpine + ¼ Boer, (Three cross - TC), at three slaughter weights (25, 30 and 35 kg). Leg represented 31.01% of half carcass, where 62.29% was total muscle, 21.45% total bone and 8.35% total fat. Alpine animals had higher bone weight than other groups. Male kids had higher muscle and bone proportion, whereas females had higher subcutaneous and intramuscular fat in leg. The percentage of total weight of the muscle, five muscles, adductor muscle, quadriceps muscle and femur were higher in the slaughter weights of 25 and 30 kg.

Espectro de gotas gerado por diferentes adjuvantes e pontas de pulverização

The application technology shows many parameters related to the quality of the application, one is the droplet spectrum, which is influenced by the spray nozzles and the adjuvant used. Therefore, the objective of this work was estimate the behavior of the droplet spectrum generated with different nozzles and different adjuvants. The experiment was installed containing four solutions from different type adjuvant dilution, as vegetal oil, mineral oil, surfactant and drift reduction, which were applied with two nozzle, one pre-orifice flat fan (DG 8003 VS) and other of air induction flat fan (AI 8003 VS), totaling 8 treatments with 3 repetitions. The experiment was realized in ideal weather conditions for spraying. The treatments averages were compared using Confidence Interval at 95% probability and the correlations between variables were analyzed using Pearson at 5% of probability. The analysis of droplet spectrum showed different behavior for each adjuvant and nozzle. The surfactant treatment showed VMD superior for all treatments when sprayed with AI nozzles. For the %vol.<100 µm the lowest value found was for the AI nozzle in combination with the surfactant. The significant correlations found for the nozzles AI and DG were negative between VMD and %vol.<100 µm. It can be concluded that the values of DMV and %vol.<100 µm showed that the nozzle with pre-orifice have droplet spectrum more prone to drift. The surfactant showed to be the best drift reduction technique when combined with the AI nozzle.

Óxidos derivados de hidromagnesitas e hidrotalcitas modificadas como catalisadores heterogêneos na síntese de biodiesel etílico

Pós-graduação em Química - IBILCE

Controle por regras: efeitos de perguntas, propriedades formais de regras e esquemas de reforço

Com o objetivo de investigar os efeitos de variáveis sobre o seguimento de regras, 24 estudantes universitários foram expostos a um procedimento de escolha de acordo com o modelo. A tarefa era apontar para os estímulos de comparação em sequência. Na Fase 1, a sequência correta era estabelecida por reforço diferencial em esquema de reforço contínuo. Nas Fases 2 e 3, as contingências de reforço eram mantidas inalteradas, enquanto as regras discrepantes de tais contingências (sugestão e ordem) eram manipuladas. Nas Condições 1 e 2, nas Fases 2 e 3, eram apresentadas a sugestão e a ordem, respectivamente. Nas Condições 3 e 4, era o inverso. Apenas na Fase 1 das Condições 1 e 3 eram feitas perguntas acerca do comportamento que produz reforço. 100% dos participantes não seguiram a sugestão e 60% não seguiram a ordem. Os resultados sugerem que a história do comportamento alternativo ao especificado pela regra, justificativas e perguntas são variáveis que podem interferir no comportamento de seguir regras discrepantes das contingências de reforço. Os resultados têm implicações para o esclarecimento das funções das contingências de reforço e de regras na explicação do comportamento.