Alterações nos níveis de colesterol, triglicerídeo e fosfolipídeo total em plasma de Callithrix jacchus (sagüi) reinfectado por Schistosoma mansoni

Pouco se conhece a cerca de alterações nos lipídeos plasmáticos devido à reinfecção por Schistosoma mansoni. Neste trabalho, foram avaliadas alterações nos lipídeos plasmáticos decorrentes de uma reinfecção por Schistosoma mansoni no primata não humano Callithrix jacchus (sagüi). Amostras de sangue dos animais, antes e após serem infectados e reinfectados, foram coletadas por punção venosa, anticoaguladas com EDTA (1mg/mL) e centrifugadas a 2.500xg para obtenção do plasma. Os níveis plasmáticos de colesterol total, colesterol éster, fosfolipídeo total e triglicerídeo foram determinados por métodos espectrofotométricos. Os resultados mostraram haver redução significativa nas concentrações de colesterol total, colesterol esterificado, triglicerídeo e fosfolipídeo total em plasma de animais reinfectados por Schistosoma mansoni, em comparação com os mesmos animais antes da infecção e após uma infecção. Este estudo mostra que uma segunda infecção por Schistosoma mansoni causa alterações lipídicas plasmáticas significativamente mais acentuadas que as decorrentes de uma única infecção.

CMOS indoor light energy harvesting system for wireless sensing applications

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores

Characterization of mannose-binding lectin plasma levels and genetic polymorphisms in HIV-1-infected individuals

INTRODUCTION: The present study investigated the association between mannose-binding lectin (MBL) gene polymorphism and serum levels with infection by HIV-1. METHODS: Blood samples (5mL) were collected from 97 HIV-1-infected individuals resident in Belém, State of Pará, Brazil, who attended the Special Outpatient Unit for Infections and Parasitic Diseases (URE-DIPE). CD4+ T-lymphocyte count and plasma viral load were quantified. A 349bp fragment of exon 1 of the MBL was amplified via PCR, using genomic DNA extracted from controls and HIV-1-infected individuals, following established protocols. MBL plasma levels of the patients were quantified using an enzyme immunoassay kit. RESULTS: Two alleles were observed: MBL*O, with a frequency of 26.3% in HIV-1-infected individuals; and the wild allele MBL*A (73.7%). Similar frequencies were observed in the control group (p > 0.05). Genotype frequencies were distributed according to the Hardy-Weinberg equilibrium in both groups. Mean MBL plasma levels varied by genotype, with statistically significant differences between the AA and AO (p < 0.0001), and AA and OO (p < 0.001) genotypes, but not AO and OO (p = 0.17). Additionally, CD4+ T-lymphocytes and plasma viral load levels did not differ significantly by genotype (p > 0.05). CONCLUSIONS: The results of this study do not support the hypothesis that MBL gene polymorphism or low plasma MBL concentrations might have a direct influence on HIV-1 infection, although a broader study involving a large number of patients is needed.

Photochemical degradation of triclosan: a comparison between different light sources

New emerging contaminants could represent a danger to the environment and Humanity with repercussions not yet known. One of the major worldwide pharmaceutical and personal care productions are antimicrobials products, triclosan, is an antimicrobial agent present in most products. Despite the high removal rate of triclosan present in wastewater treatments, triclosan levels are on the rise in the environment through disposal of wastewater effluent and use of sewage sludge in land application. Regulated in the EC/1272/2008 (annex VI, table 3.1), this compound is considered very toxic to aquatic life and it has been reported that photochemical transformation of triclosan produces dioxins. In the current work it was defined three objectives; determination of the most efficient process in triclosan degradation, recurring to photochemical degradation methods comparing different sources of light; identification of the main by-products formed during the degradation and the study of the influence of the Fenton and photo-Fenton reaction. Photochemical degradation methods such as: photocatalysis under florescent light (UV), photocatalysis under visible light (sunlight), photocatalysis under LEDs, photo-Fenton and Fenton reaction have been compared in this work. The degradation of triclosan was visualized through gas chromatography/mass spectrometry (GC/MS). In this study photo-Fenton reaction has successfully oxidized triclosan to H2O and CO2 without any by-products within 2 hours. Photocatalysis by titanium dioxide (TiO2) under LEDs was possible, having a degradation rate of 53% in an 8 hours essay. The degradation rate of the Fenton reaction, UV light and sunlight showed degradation between 90% and 95%. The results are reported to the data observed without statistic support, since this was not possible during the work period. Hydroquinone specie and 2,4-dichlorophenol by-products were identified in the first hour of photocatalysis by UV. A common compound, possibly identified has C7O4H , was present at the degradation by UV, sunlight and LEDs and was concluded to be a contaminant. In the future more studies in the use of LEDs should be undertaken given the advantages of long durability and low consumption of energy of these lamps and that due to their negative impact on the environment fluorescent lamps are being progressively made unavailable by governments, requiring new solutions to be found. Fenton and photo-Fenton reactions can also be costly processes given the expensive reagents used.

Autonomia funcional em idosos : caracterização multidimensional em idosos utentes de um centro de saúde urbano

RESUMO: Tivemos como objectivo do presente trabalho avaliar a capacidade funcional, e factores eventualmente a ela associados, numa amostra de 152 idosos ambulatórios, sem doenças agudas ou graves, utentes de um centro de saúde urbano. Cada avaliação consistiu numa entrevista, mediante um inquérito sobre capacidade funcional, morbilidade, estado mental e aspectos sociais, e no estudo da composição corporal. As perguntas referentes às variáveis estudadas foram por nós desenvolvidas e estruturadas com base em escalas internacionais validadas e de utilização comum na avaliação de idosos, excepto para as variáveis em que não encontrámos escalas com essas características. Os seus quesitos foram incluídos como perguntas e respostas estruturadas e pré-codificadas, permitindo a atribuição de uma pontuação a cada variável e a sua posterior divisão dicotómica. Aplicámos as escalas de Katz e de Lawton para a avaliação das actividades de autonomia física e instrumental da vida diária, a escala de Grimby para a avaliação da actividade física, a escala de Hamilton e o teste de Folstein para a avaliação do estado mental nas vertentes afectiva e cognitiva e a escala de Graffar para caracterizar a classe social, e perguntas sobre locomoção, autoavaliação da saúde, queixas de saúde presentes e rede social. Fizemos o registo da morbilidade segundo a International Classification of Primary Care - ICPC. A avaliação antropométrica constou da medição do peso, da altura, dos perímetros do braço, da cintura, da anca e proximal da coxa, e das pregas bicipital, tricipital, sub-escapular e supra-ilíaca. Foi também feita a estimativa da composição corporal por cálculos derivados de índices antropométricos e de bioimpedância eléctrica corporal total, o doseamento de algumas proteínas plasmáticas e a quantificação da força de preensão. Analisámos os resultados obtidos por grupos quanto ao sexo e à idade, dividida nos escalões etários 65 a 74 anos e mais do que 74 anos. Por regressão linear múltipla, foi testado o efeito do sexo e da idade sobre os valores medidos, para cada uma das variáveis e cada uma das suas pontuações parciais, sendo considerado como evidência de um efeito estaticamente significativo um valor “p” inferior a 0,05.Resumimos do seguinte modo os dados obtidos e a sua comparação com os dos estudos que seleccionámos como referência: A média de idades da amostra foi de 74 anos, sendo um terço destes do sexo masculino. Na sua maioria eram independentes em locomoção e funcionalidade, praticavam alguma actividade física, classificavam a sua saúde como razoável ou boa, apresentavam sintomatologia activa, não tinham depressão ou demência, tinham quem os acompanhasse embora cerca de metade apresentasse algum grau de isolamento, eram de baixa classe social, tinham excesso de peso, valores elevados de massa gorda, parâmetros plasmáticos proteicos compatíveis com ausência de doenças agudas ou graves e considerável força muscular de preensão. Na análise descritiva por grupos quanto ao sexo e/ou à idade, verificou-se que as mulheres e os mais idosos apresentavam maior isolamento social e os valores mais baixos de massa magra, hemoglobina e força de preensão. As mulheres tinham maior prevalência de dependência em autonomia física, depressão e valores mais baixos de transferrina. Os mais idosos apresentavam maior dependência em funcionalidade, menor actividade física, maior prevalência de demência, índice de massa corporal menos elevado, e valores mais baixos de albumina. Não se verificou prevalência de piores resultados dicotómicos nos homens nem no escalão etário menos idoso. Não teve relação com o sexo ou a idade o compromisso em autonomia instrumental, a presença de morbilidade ou a baixa classe social, assim como a não perturbação da locomoção e dos níveis de somatomedina-C. A análise comparativa com estudos multidimensionais em idosos portugueses e europeus ambulatórios revelou que a nossa amostra apresentava muitas características semelhantes às desses idosos. Assim, tinham elevada independência em locomoção, considerável independência em autonomia física e menor independência em autonomia instrumental; prática de actividade física ligeira, as mulheres dentro e os homens fora de casa; maior prevalência de morbilidade a nível dos aparelhos locomotor e cardiocirculatório, nos nossos idosos com pouca flutuação na autoavaliação de saúde; pequena prevalência de depressão e de demência; maior isolamento social nas mulheres e nas mais idosas; factores de classe social de baixo nível, diferindo apenas em relação aos idosos do norte da Europa que apresentavam elevada escolaridade e profissões mais diferenciadas; características biométricas sobreponíveis às dos idosos portugueses e às dos do sul da Europa, com tendência para o excesso de peso e proporção elevada de massa gorda; e doseamentos plasmáticos proteicos e força muscular de preensão compatíveis com ausência de doenças agudas ou crónicas graves. A comparação com os referidos estudos em relação ao risco de dependência, revelou semelhanças na associação entre dependência funcional e idade avançada, morbilidade, alteração do estado mental e isolamento social. Na amostra que estudámos não obtivemos associação entre dependência e o sexo feminino, facto que se verificou no estudo nacional de Almeida et al. e nos estudos multicêntricos europeus, ou o grau de escolaridade, como no estudo francês. Podemos concluir que, com o instrumento de avaliação que utilizámos, foi possível detectar e caracterizar perturbações numa amostra de idosos ambulatórios, a maioria funcionalmente independentes, sem alterações do estado mental, mas apresentando morbilidade activa, tendência para a obesidade, e actividade física ligeira. Nos que apresentaram alterações, estas foram mais frequentes no sexo feminino e nos indivíduos com mais de 74 anos. A escala de funcionalidade desenvolvida foi sensível aos efeitos da idade e permitiu o cálculo do risco de dependência em relação às outras variáveis estudadas, sendo mais marcante a associação com baixa actividade física, presença de queixas de saúde, demência e índice de massa corporal elevado. Consideramos que a metodologia que empregámos poderá contribuir para a avaliação de capacidades, cujo conhecimento sistemático nos idosos se impõe. ------------- ABSTRACT: The main objective of the present work was to evaluate functional capacity and related factors, in a sample of 152 ambulatory elderly, free from acute or serious disease, attending an urban health centre. Each evaluation included an interview, with a questionnaire about functional capacity, morbidity, mental health and social aspects, and the study of body composition. The questions were developed and structured in accordance with international validated scales usually applied in the evaluation of the elderly, whenever there were scales for that purpose. Their items were included as structured pre-coded questions and answers, so that each variable could have its own quotation and be dichotomised. We employed Katz and Lawton scales for basic and instrumental activities of daily living, Grimby scale for physical activity, Hamilton scale for depression, Folstein’s Mini Mental State Examination for cognitive ability and Graffar scale for social class, and questions about walking, health perception, active complaints and social network. The symptoms register was done according to the International Classification of Primary Care - ICPC. The anthropometric exam involved the determination of height and weight, arm, waist, hip and proximal thigh circumferences, and biceps, triceps, subscapular and suprailiac skinfolds. For the body composition calculation we employed equations derived from anthropometric indices, and from measurement of total body bioelectric impedance. We also measured some plasma proteins and handgrip strength. The analysis of results was done by sex and age groups, separating those with 65 to 74 years from those older than 74 years. The effects of sex and age were tested by linear multiple regression, for each variable and its components. Presented "p" values being considered statistically significative if less than 0,05. The results we obtained and their comparison with the studies we choose as reference can be summarised as follows: Mean age of the sample was 74 years and about one third were men. Most of them were independent in gait and functionality, practised some physical activity, rate their health as fair or good, had physical complaints, had not depression or dementia, had some companionship although almost half of them with stigmas of isolation, belonged to low social class, were in the range of overweight, had raised values of fat mass, plasma proteins in accordance with no acute or serious disease, and considerable handgrip strength. The analysis of groups by sex and age revealed that women and the eldest had the greater social isolation and the lowest values of free fat mass, haemoglobin and handgrip strength. Women had the higher dependence in basic activities of daily living, more depression and lower levels of transferrin. The eldest were more dependent in functionality, had greater prevalence of dementia, less physical activity, less raised body mass index and lower levels of albumin. Men alone and the age range of 65 to 74 did not show any prevalence of the worse dichotomised results. There was no relationship between sex or age and instrumental activities of daily living, morbidity or low social class, and unaffected gait or somatomedin-C levels. The comparison of results with multidimensional studies in portuguese and european ambulatory elderly showed that our sample had many similarities with theirs. They were independent in gait and activities of daily living; practiced light physical activity, women indoors and men outdoors; had greater morbidity at locomotor and cardiovascular systems, with small latitude in health evaluation; low prevalence of depression and dementia; social isolation predominantly in older women; and low social class factors, witch is only different from those of north Europe who had higher education levels and professional carriers; biometric characteristics similar to other portuguese and south Europe elders, with tendency for overweight and high proportion of fat mass; and plasma protein levels and handgrip strength in accordance with no acute or chronic serious disease. The comparison to the referred studies in relation to dependency risk, showed similarities in the association of dependency and age, morbidity,altered mental state and social isolation. We did not find association between dependency and sex, as it was found in the portuguese study of Almeida et al. and the european multicentric studies, or the education level, as in the french study. We conclude that, with the evaluation battery we employed, it was possible to detect and characterise alterations in a sample of ambulatory elderly, most of whom were functionally independent and had no alterations in mental state, but had active morbidity, tendency to obesity, and only light physical activity. Those that had some alteration, were more frequently women and the eldest. The functionality scale we developed showed to be sensitive to age effects and suitable for the calculation of risk of dependency, being more important the association with low physical activity, active complaints, dementia and high body mass index. We consider that the methodology we applied can contribute to the evaluation of capabilities that should be systematically sought for in the elderly.

Desenvolvimento de novas ferramentas analíticas para a monitorização da actividade da Paraoxonase 1 em amostras de plasma humano

Segundo a Organização Mundial da Saúde (OMS), as doenças cardiovasculares (DCV) são a principal causa de morte nos países desenvolvidos. Há uma necessidade urgente de métodos eficazes para a detecção precoce de doenças cardiovasculares, devido à falta de factores de risco convencionais. Os níveis elevados de homocisteína (Hcy) no sangue, homocisteinemia, são um factor de risco independente bem estabelecido para DCV. De acordo com alguns autores, a conversão metabólica de Hcy no metabolito tóxico Hcy-Tl e subsequente N-homocisteinilação de proteínas induz a agregação e a formação de amiloide, contribuindo assim para a alterações próaterogénicas no sistema cardiovascular. A enzima associada à lipoproteína de alta densidade (HDL), paraoxonase 1 (PON1), é capaz de hidrolisar o metabolito tóxico Hcy-Tl de volta a Hcy no soro humano, como observado em estudos recentes que indicam o papel de patogénese em DCV da hPON1. As paraoxonases de soro (PON1, PON2 e PON3) são hidrolases dependentes de cálcio, que pertencem a uma família de enzimas que exibem propriedades antioxidantes e anti-inflamatórias. Foram identificadas três actividades catalíticas principais para PON1: (i) actividade paraoxonase, que corresponde à conversão hidrolítica de paraoxon em p-nitrofenol e a dietil fosfato, (ii) a actividade arilesterase que promove a hidrólise de ésteres aromáticos, e a (iii) actividade de lactonase, que catalisa a hidrólise de Hcy a Hcy-Tl, sendo considerada a actividade principal da PON1. Vários estudos têm relacionado estas actividades enzimáticas a diversas patologias, o que sugere a sua potencial utilidade no diagnóstico clínico. Neste trabalho pretende-se desenvolver um novo método electroquímico para a detecção fácil do substrato e produto resultantes da hidrólise enzimática de paraoxon pela hPON1. Utilizando uma célula electroquímica constituída por um eléctrodo de referência Ag /AgCl., um contra-eléctrodo de Pt e um electrodo de trabalho de carbono vítreo, o paraoxon e p-nitrofenol foram detectados simultaneamente por voltametria de onda quadrada, numa janela de potencial de [-0,3;-1,2] V. Os resultados dos ensaios com a enzima testada a pH 7,6 e 37°C, na presença de paraoxon e utilizando plasma humano como uma fonte de PON1 serão discutidos. Usando a mesma composição de célula electroquímica, Hcy e Hcy-Tl foram estudados utilizando diferentes interfaces e tipos de tratamento para testar a melhor maneira possível de detecção das duas espécies na mesma experiência electroquímica.

Using an LED as a sensor and visible light communication device in a smart illumination system

The need for more efficient illumination systems has led to the proliferation of Solid-State Lighting (SSL) systems, which offer optimized power consumption. SSL systems are comprised of LED devices which are intrinsically fast devices and permit very fast light modulation. This, along with the congestion of the radio frequency spectrum has paved the path for the emergence of Visible Light Communication (VLC) systems. VLC uses free space to convey information by using light modulation. Notwithstanding, as VLC systems proliferate and cost competitiveness ensues, there are two important aspects to be considered. State-of-the-art VLC implementations use power demanding PAs, and thus it is important to investigate if regular, existent Switched-Mode Power Supply (SMPS) circuits can be adapted for VLC use. A 28 W buck regulator was implemented using a off-the-shelf LED Driver integrated circuit, using both series and parallel dimming techniques. Results show that optical clock frequencies up to 500 kHz are achievable without any major modification besides adequate component sizing. The use of an LED as a sensor was investigated, in a short-range, low-data-rate perspective. Results show successful communication in an LED-to-LED configuration, with enhanced range when using LED strings as sensors. Besides, LEDs present spectral selective sensitivity, which makes them good contenders for a multi-colour LED-to-LED system, such as in the use of RGB displays and lamps. Ultimately, the present work shows evidence that LEDs can be used as a dual-purpose device, enabling not only illumination, but also bi-directional data communication.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

Relationship between plasma creatinine concentration and glomerular filtration in preterm newborn infants

Fluid management and dosage regimens of drugs in preterm infants should be based on the glomerular filtration rate. The current methods to determine glomerular flitration rate are invasive, time-consuming, and expensive. In contrast, creatinine clearance can be easy obtained and quickly determined. The purpose of this study was to compare plasma creatinine on the third and seventh day of life in preterm newborn infants, to evaluate the influence of maternal creatinine, and to demonstrate creatinine clearance can be used as a reliable indicator of glomerular filtration rate. We developed a prospective study (1994) including 40 preterm newborns (gestational age < 37 weeks), average = 34 weeks; birth weight (average) = 1840 g, in the first week of life. Inclusion criteria consisted of: absence of renal and urinary tract anomalies; O2 saturation 3 92%; adequate urine output (>1ml/kg/hr); normal blood pressure; absence of infections and no sympathomimetic amines in use. A blood sample was collected to determine plasma creatinine (enzymatic method) on the third and seventh day of life and creatinine clearance (CrCl) was obtained using the following equation: , k = 0.33 in preterm infant All plasma creatinine determinations showed normal values [third day: 0.78 mg/dl ± 0.24 (mean ± SD)and seventh day: 0.67 mg/dl ± 0.31 - (p>0.05)]. Also all creatinine clearance at third and seventh day of life were normal [third day: 19.5 ml/min ± 5.2 (mean ± SD) and seventh day: 23.8 ml/min ± 7.3 - (p>0,05)]. All preterm infants developed adequate renal function for their respective gestational age. In summary, our results indicate that, for clinical practice, the creatinine clearance, using newborn length, can be used to estimate glomerular filtration rate in preterm newborn infants.

Plasma nitriding of AA2011 alloy and surface characterization by NDT techniques

Al-Cu alloys are widely used in the aerospace and automotive industries due to their high specific strength in some tempered conditions. However, due to poor corrosion and wear resistance, they are often anodized and/or painted. Plasma nitriding has been proposed as an alternative, though the developments in this technique are still in a recent stage for Al alloys. Electrical characterization techniques are well implemented NDTs in the industry because of good accuracy associated with lower cost, compared to other methods. Some, like eddy currents and 4-point probe techniques, are often used in coating inspection. The objective of this study was to perform Al nitriding at low temperatures to minimize the tempering initial condition damage and to assess the feasibility of eddy currents technique as a method for evaluating surface properties. The work developed can be divided in two stages. The first one was the process tuning, done at the Shibaura Institute of Technology, in Tokyo; and the second was the electrical characterization done in Faculdade de Ciências e Tecnologia, UNL. Low temperature nitriding of AA2011 alloy specimens was successfully achieved. Electrical conductivity results show that lift-off measurements by eddy currents testing can be related to surface properties.

The effect of energy and traffic light labeling on parents purchasing decisions of cereals for their children

Objective: Nutritional labeling systems are considered a tool to fight obesity since they aim to contribute for more informed food choices as well as assist consumers to make healthier nutrition options and in this manner, contribute to a decrease in the obesity rate. This study intends to analyze the effect of different types of labeling systems on parents’ purchasing decisions for their children on a specific product: breakfast cereals. More precisely, how labels affect parents’ perception of healthiness regarding cereals and if the nutritional information has an effect on intended purchases for their children. Participants and methods: We conducted a study with 135 Portuguese parents of children aged 4 to12 years. Parents answered a questionnaire with one of three hypothetical cereals menus. Menus only differed in their nutritional labeling technique: no labels (control group), reference intake labels or traffic light labels. In addition, we conducted 20 face-to-face interviews to a different group of parents in order to perform a recall task. Findings: This paper provides no evidence to suggest that energy labeling or traffic light labeling systems alone were successful in helping parents making healthy purchases of cereals for their children. Therefore, there is the need to promote supplementary policies to encourage the consumption of healthier food and help fight obesity.

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).