Stability of Cs-Ionsiv in Portland cement blends for radioactive waste disposal

The suitability of Portland cement blends for encapsulation of Cs-Ionsiv in a monolithic wasteform was investigated. No evidence of reaction or dissolution of the Cs-Ionsiv in the cementitious environment was found by scanning electron microscopy and X-ray diffraction. However, a small fraction (≤1.6 wt%) of the Cs inventory was released from the encapsulated Ionsiv during leaching experiments carried out on hydrated samples. Cs release was enhanced by exchange of K and Na present in the cementitious pore water. Cement systems lower in K and Na, such as slag based blends, showed lower Cs release than the fly ash based analogues. © 2010 Materials Research Society.

Reflectivity and durability of epoxy pavement markings. Interim report.

Federal Highway Administration, Office of Research, Development and Technology, Washington, D.C.

Properties and economics of methanol-gasoline blends with high methanol content.

Energy Department, Office of Vehicle and Engine Research and Development, Washington, D.C.

Corrosion evaluation of epoxy-coated, metallic-clad and solid metallic reinforcing bars in concrete /

"December 1998."

Consumers' taste reactions to three experimental blends of orange and grapefruit juice.

Mode of access: Internet.

Further studies of epoxy bonding compounds. Physical research project no. 13

Mode of access: Internet.

Epoxy striping for improved durability /

Mode of access: Internet.

Usage guide for rapid-set epoxy adhesive (118-AF) for traffic marker /

Mode of access: Internet.

Epoxy thermoplastic pavement marking material : specification and testing.

Mode of access: Internet.

Development of graphite epoxy housing for nickel-cadmium cell /

"Presented to Society for the Advancement of Material & Processing Engineering at 9th National Technical Conference, October 4-6, 1977, Atlanta, Georgia."

Layered silicate nanocomposites based on various high-functionality epoxy resins: The influence of an organoclay on resin cure

The influence of an organically modified clay on the curing behavior of three epoxy systems widely used in the aerospace industry and of different structures and functionalities, was studied. Diglycidyl ether of bisphenol A (DGEBA), triglycidyl p-amino phenol (TGAP) and tetraglycidyl diamino diphenylmethane (TGDDM) were mixed with an octadecyl ammonium ion modified organoclay and cured with diethyltoluene diamine (DETDA). The techniques of dynamic mechanical thermal analysis (DMTA), chemorheology and differential scanning calorimetry (DSC) were applied to investigate gelation and vitrification behavior, as well as catalytic effects of the clay on resin cure. While the formation of layered silicate nanocomposite based on the bifunctional DGEBA resin has been previously investigated to some extent, this paper represents the first detailed study of the cure behavior of different high performance, epoxy nanocomposite systems.

Poly(hydroxyether of phenolphthalein) and its blends with poly(ethylene oxid)

Poly(hydroxyether of phenolphthalein) (PPH) was synthesized through the polycondensation of phenolphthalein with epichlorohydrin. It was characterized by Fourier transform infrared (FTIR) spectroscopy, NMR spectroscopy, and differential scanning calorimetry (DSC). The miscibility of the blends of PPH with poly(ethylene oxide) (PEO) was established on the basis of the thermal analysis results. DSC showed that the PPH/PEO blends prepared via casting from N,N-dimethylformamide possessed single, composition-dependent glass-transition temperatures. Therefore, the blends were miscible in the amorphous state for all compositions. FTIR studies indicated that there were competitive hydrogen-bonding interactions with the addition of PEO to the system, which were involved with (OHO)-O-. . .=C

Phenolic acids and abscisic acid in Australian Eucalyptus honeys and their potential for floral authentication

Seven phenolic acids related to the botanical origins of nine monofloral Eucalyptus honeys from Australia, along with two abscisic isomers, have been analyzed. The mean content of total phenolic acids ranges from 2.14 mg/100 g honey of black box (Eucalyptus largiflorens) honey to 10.3 mg/100 g honey of bloodwood (Eucalyptus intermedia) honey, confirming an early finding that species-specific differences of phytochemical compositions occur quantitatively among these Eucalyptus honeys. A common profile of phenolic acids, comprising gallic, chlorogenic, coumaric and caffeic acids, can be found in all the Eucalyptus honeys, which could be floral markers for Australian Eucalyptus honeys. Thus, the analysis of phenolic acids could also be used as an objective method for the authentication of botanical origin of Eucalyptus honeys. Moreover, all the honey samples analyzed in this study contain gallic acid as the main phenolic acid, except for stringybox (Eucalyptus globoidia) honey which has ellagic acid as the main phenolic acid. This result indicates that the species-specific differences can also be found in the honey profiles of phenolic acids. Further-more, the analysis of abscisic acid in honey shows that the content of abscisic acid varies from 0.55 mg/100 g honey of black box honey to 4.68 mg/ 100 g honey of bloodwood honey, corresponding to the contents of phenolic acids measured in these honeys. These results have further revealed that the HPLC analysis of honey phytochemical constituents could be used individually and/or jointly for the authentication of the botanical origins of Australian Eucalyptus honeys. (C) 2003 Elsevier Ltd. All rights reserved.

HPLC analyses of flavanols and phenolic acids in the fresh young shoots of tea (Camellia sinensis) grown in Australia

As part of a 4-year project to study phenolic compounds in tea shoots over the growing seasons and during black tea processing in Australia, an HPLC method was developed and optimised for the identification and quantification of phenolic compounds, mainly flavanols and phenolic acids, in fresh tea shoots. Methanol proved to be the most suitable solvent for extracting the phenolic compounds, compared with chloroform, ethyl acetate and water. Immediate analysis, by HPLC, of the methanol extract showed higher separation efficiency than analyses after being dried and redissolved. This method exhibited good repeatability (CV 3-9%) and recovery rate (88-116%). Epigallocatechin gallate alone constituted up to 115 mg/g, on a dry basis, in the single sample of Australian fresh tea shoots examined. Four catechins (catechin, gallocatechin, epicatechin and epigallocatechin) and six catechin gallates (epigallocatechin gallate, catechin gallate, epicatechin gallate, gallocatechin gallate, epicatechin digallate and epigallocatechin digallate) have been identified and quantified by this HPLC method. In addition, two major tea alkaloids, caffeine and theobromine, have been quantified, while five flavonol glycosides and six phenolic acids, including quinic acids and esters, were identified and quantified. (C) 2003 Elsevier Ltd. All rights reserved.