Adaptive optimization schemes for mobile VoIP applications Battery life and call quality aspects

In this thesis programmatic, application-layer means for better energy-efficiency in the VoIP application domain are studied. The work presented concentrates on optimizations which are suitable for VoIP-implementations utilizing SIP and IEEE 802.11 technologies. Energy-saving optimizations can have an impact on perceived call quality, and thus energy-saving means are studied together with those factors affecting perceived call quality. In this thesis a general view on a topic is given. Based on theory, adaptive optimization schemes for dynamic controlling of application's operation are proposed. A runtime quality model, capable of being integrated into optimization schemes, is developed for VoIP call quality estimation. Based on proposed optimization schemes, some power consumption measurements are done to find out achievable advantages. Measurement results show that a reduction in power consumption is possible to achieve with the help of adaptive optimization schemes.

Performance and Methodological Aspects in Positron Emission Tomography

Performance standards for Positron emission tomography (PET) were developed to be able to compare systems from different generations and manufacturers. This resulted in the NEMA methodology in North America and the IEC in Europe. In practices, the NEMA NU 2- 2001 is the method of choice today. These standardized methods allow assessment of the physical performance of new commercial dedicated PET/CT tomographs. The point spread in image formation is one of the factors that blur the image. The phenomenon is often called the partial volume effect. Several methods for correcting for partial volume are under research but no real agreement exists on how to solve it. The influence of the effect varies in different clinical settings and it is likely that new methods are needed to solve this problem. Most of the clinical PET work is done in the field of oncology. The whole body PET combined with a CT is the standard investigation today in oncology. Despite the progress in PET imaging technique visualization, especially quantification of small lesions is a challenge. In addition to partial volume, the movement of the object is a significant source of error. The main causes of movement are respiratory and cardiac motions. Most of the new commercial scanners are in addition to cardiac gating, also capable of respiratory gating and this technique has been used in patients with cancer of the thoracic region and patients being studied for the planning of radiation therapy. For routine cardiac applications such as assessment of viability and perfusion only cardiac gating has been used. However, the new targets such as plaque or molecular imaging of new therapies require better control of the cardiac motion also caused by respiratory motion. To overcome these problems in cardiac work, a dual gating approach has been proposed. In this study we investigated the physical performance of a new whole body PET/CT scanner with NEMA standard, compared methods for partial volume correction in PET studies of the brain and developed and tested a new robust method for dual cardiac-respiratory gated PET with phantom, animal and human data. Results from performance measurements showed the feasibility of the new scanner design in 2D and 3D whole body studies. Partial volume was corrected, but there is no best method among those tested as the correction also depends on the radiotracer and its distribution. New methods need to be developed for proper correction. The dual gating algorithm generated is shown to handle dual-gated data, preserving quantification and clearly eliminating the majority of contraction and respiration movement

DFM(A)- aspects for a fixed electrical attenuator design

The goal of this paper is to describe a complete and extensive prototype design of a fixed electrical attenuator. The paper starts by describing the function and by giving some basic information about the attenuators. After a comprehensive description of the component, the facts of reverse engineering are discussed. The method itself is applied to ease manufacturing and design stages of this component. Information about materials and applied manufacturing technologies are also included in this report. By applying some specified DFMA-aspects the final design turned out to be a potential prototype device to be manufactured and for further analyse.

DFM(A)- aspects for a microwave waveguide ring resonator design

In this research manufacturability analysis is made for an E-plane waveguide ring resonator. About the electrical characteristics of the waveguide ring resonator is discussed. Possibilities to utilize concurrent engineering method both for designing and making manufacturability analysis for MW- and RF-components are discussed. For helping to establish the necessary guidelines for easy manufacturing and assembly of the waveguide ring resonator a specialised DFM(A)-questionnaire is generated. The questionnaire gives also new information for collaborative designing approach in MW-/RF- engineering. The advantages and disadvantages of the concurrent engineering design method are evaluated in the research.

DFM(A)- aspects for a horn antenna design

In this paper aspects of design for manufacturability and assembly (DFMA) are applied to the design of coaxially fed standard gain horn antenna for 1.70 - 2.60 GHz. Possibilities to utilize cross-technological approach method is examined. Methods of DFMA for laser processing are covered and practical design guides and methods are developed. Antenna construction for easy manufacturing and specialized performance is shown. Required dimensions and tolerances are discussed and suitable materials for laser processing are selected.

DFM(A)- aspects for an sma connector design

In this research, manufacturability analysis is made for an SMA connector. Analysis and aspects of applying virtual prototyping for an SMA connector design and manufacturing are also investigated. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) –aspects of products. The aspects of easy manufacturing for machining the SMA connector are collected. Material selection is discussed, and manufacturing stages of prototype manufacturing are presented. The main focus of this research is on prototype manufacturing, but also aspects considering volume production are discussed. A special purpose SMA connector is designed for printed circuit board edge mounting.

DFM/DFMA(A) – analysis and aspects of applying systematic engineering for a microwave testfixture design

In this paper, manufacturability analysis and collection of design aspects is made for a microwave test-fixture. Aspects of applying systematic design for a microwave test-fixture design and manufacturing are also analysed. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) – aspects of the component. The aspects of easy manufacturing for machining the microwave test-fixture are collected. Material selection is discussed and manufacturing stages of prototype manufacturing are presented.

Pathétique Sonata : a study of musical aspects in subjection of aesthetic aims

This study makes an attempt to capture some of the aesthetic ideas prospering in the latter half of the eighteenth century and investigates in what way these are possibly being manifested in different musical aspects in Beethoven's early work, and most specifically in his eight sonata, often referred to as the Pathétique sonata. Beginning the first chapter with an introduction to aesthetic notions in Beethoven's age, the second chapter is mostly concerned with anecdotes regarding the Pathétique sonata. Further the third chapter exhibits possible influences between Cherubini, Beethoven and Wagner, and the last three chapters treat different musical and aesthetic aspects like Beethoven's relation to the C minor tonality, the German Sturm und Drang movement, and finally some parallels that can be found between literature and music.

Counteracting incentive sensitization in severe alcohol dependence using deep brain stimulation of the nucleus accumbens: clinical and basic science aspects

The ventral striatum / nucleus accumbens has been implicated in the craving for drugs and alcohol which is a major reason for relapse of addicted people. Craving might be induced by drug-related cues. This suggests that disruption of craving-related neural activity in the nucleus accumbens may significantly reduce craving in alcohol-dependent patients. Here we report on preliminary clinical and neurophysiological evidence in three male patients who were treated with high frequency deep brain stimulation of the nucleus accumbens bilaterally. All three had been alcohol dependent for many years, unable to abstain from drinking, and had experienced repeated relapses prior to the stimulation. After the operation, craving was greatly reduced and all three patients were able to abstain from drinking for extended periods of time. Immediately after the operation but prior to connection of the stimulation electrodes to the stimulator, local field potentials were obtained from the externalized cables in two patients while they performed cognitive tasks addressing action monitoring and incentive salience of drug related cues. LFPs in the action monitoring task provided further evidence for a role of the nucleus accumbens in goal-directed behaviors. Importantly, alcohol related cue stimuli in the incentive salience task modulated LFPs even though these cues were presented outside of the attentional focus. This implies that cue-related craving involves the nucleus accumbens and is highly automatic.

Importance of the lipid peroxidation biomarkers and methodological aspects FOR malondialdehyde quantification

Free radicals induce lipid peroxidation, playing an important role in pathological processes. The injury mediated by free radicals can be measured by conjugated dienes, malondialdehyde, 4-hydroxynonenal, and others. However, malondialdehyde has been pointed out as the main product to evaluate lipid peroxidation. Most assays determine malondialdehyde by its reaction with thiobarbituric acid, which can be measured by indirect (spectrometry) and direct methodologies (chromatography). Though there is some controversy among the methodologies, the selective HPLC-based assays provide a more reliable lipid peroxidation measure. This review describes significant aspects about MDA determination, its importance in pathologies and biological samples treatment.

Las habilidades motrices básicas en educación primaria: aspectos de su desarrollo = Key motor skills in primary education: developmental aspects

The physical education curriculum stresses the importance of improving students’ key motor skills. This idea agrees with the contributions of research into motor development concerning the important role these skills play in child development. In order to facilitate this improvement is essential to know the different basic aspects of how these key motor skills evolve as well as the essential factors related to the characteristics and conditions of educational practice

THE ROLE OF NANOMATERIALS IN COSMETICS: NATIONAL AND INTERNATIONAL LEGISLATIVE ASPECTS

Nanotechnology is currently one of the fastest growing scientific fields. The products of this science have become part of our everyday lives. However, to date, regulatory agencies have not yet established a single definition for nanomaterials and nanotechnology. Therefore, each country has its own definitions and legislation to control products containing nanomaterials. Being relatively new materials, there are no long-term studies showing their impact on human health and the environment. Consequently, countries control the amount of nanomaterials present in cosmetics, allowing the end consumer to choose which cosmetic to use, by choosing products with or without nanomaterials. Therefore, the primary objective of this study was to identify the most used nanomaterials in cosmetics and verify whether these formulations are in accordance with the laws in force in the United States, the European Union and Brazil, thereby determining if the cosmetics on the market are in line with the existing laws in these three economic powers. This study is unique and will contribute to furthering the discussion on existing laws pertinent to the use of nanotechnology in cosmetics.

Cultural aspects of globalizing university-industry knowledge interaction in China

Previous studies of the local involvement of multinational corporation (MNC) subsidiaries focus on host-country firms and local business partners such as suppliers and customers. The role of host-country universities in the same context of innovation networks is neglected. Furthermore, there are many organizational culture- and knowledge-related differences between universities and companies, and this is likely to pose additional challenges for successful collaboration. Early university-industry (U-I) studies have primarily been limited within a national boundary, being concerned with a single level of culture (i.e., at an organizational level) and one-way knowledge transfer from university to industry. Research on more dynamic knowledge interaction in multinational settings is lacking. This is particularly true in the business context of China. In today’s globalizing and rapidly changing organizations, addressing cultural differences and clashes is an everyday reality, and inter-cultural U-I collaboration is becoming a key asset for gaining global competitiveness. This study deals with Finnish MNC subsidiaries’ research collaboration with Chinese universities. It aims to explore the essence of such U-I collaboration and knowledge interaction, uncovering the deep functioning mechanisms of culture underlying effective collaborative knowledge creation and innovation. The study reviews critically different bodies of literature including knowledge management theories and studies, U-I collaboration and knowledge interaction, and cross-cultural research in terms of organizational knowledge generation and utilization. It adopts a case study strategy with qualitative research methods, and data is collected through in-depth interviews and participant observation. The study presents the following major findings: 1. In the light of a comprehensive analysis of U-I collaboration, an effective matching strategy is proposed, in the assumption that good alignment of knowledge interaction strategies and approaches with their corresponding knowledge type, capability development and research task may greatly enhance the effectiveness of cross-cultural U-I collaboration and knowledge interaction. 2. It is proposed that in the Chinese MNC context more dynamic types of knowledge interaction like knowledge co-creation should be of key concern particularly when dealing simultaneously with multi-disciplinary applied research of human factors and technologies. U-I knowledge interaction, otherwise, pays attention only to the study of one-way technology and knowledge transfer. 3. It is posited that the influence of culture on collaborative knowledge interaction can be studied in a valuable way when knowledge-related variables are simultaneously taken into account. A systematic analysis of the role of knowledge in cross-cultural knowledge interaction could best be approached from multi-aspects of knowledge including not only nature, characteristics and types of knowledge but also the process of knowledge (e.g., intensifications of knowledge interaction). 4. The study demonstrates the significant role of aspects of the host-country culture (e.g., Chinese guanxi) in U-I collaboration and knowledge interaction. This is evident, for instance, in issues related to interpersonal relationships and trust, true interest and the relatedness of the research, mutual commitment and learning, communication intensity and interaction, and awareness of cultural and knowledge-related differences between collaboration partners. Theoretical and practical implications of the findings are suggested and discussed.