High-performance liquid chromatography of the renal blood flow marker p-aminohippuric acid (PAH) and its metabolite N-acetyl PAH improves PAH clearance measurements.

PAH (N-(4-aminobenzoyl)glycin) clearance measurements have been used for 50 years in clinical research for the determination of renal plasma flow. The quantitation of PAH in plasma or urine is generally performed by colorimetric method after diazotation reaction but the measurements must be corrected for the unspecific residual response observed in blank plasma. We have developed a HPLC method to specifically determine PAH and its metabolite NAc-PAH using a gradient elution ion-pair reversed-phase chromatography with UV detection at 273 and 265 nm, respectively. The separations were performed at room temperature on a ChromCart (125 mmx4 mm I.D.) Nucleosil 100-5 microm C18AB cartridge column, using a gradient elution of MeOH-buffer pH 3.9 1:99-->15:85 over 15 min. The pH 3.9 buffered aqueous solution consisted in a mixture of 375 ml sodium citrate-citric acid solution (21.01 g citric acid and 8.0 g NaOH per liter), added up with 2.7 ml H3PO4 85%, 1.0 g of sodium heptanesulfonate and completed ad 1000 ml with ultrapure water. The N-acetyltransferase activity does not seem to notably affect PAH clearances, although NAc-PAH represents 10.2+/-2.7% of PAH excreted unchanged in 12 healthy subjects. The performance of the HPLC and the colorimetric method have been compared using urine and plasma samples collected from healthy volunteers. Good correlations (r=0.94 and 0.97, for plasma and urine, respectively) are found between the results obtained with both techniques. However, the colorimetric method gives higher concentrations of PAH in urine and lower concentrations in plasma than those determined by HPLC. Hence, both renal (ClR) and systemic (Cls) clearances are systematically higher (35.1 and 17.8%, respectively) with the colorimetric method. The fraction of PAH excreted by the kidney ClR/ClS calculated from HPLC data (n=143) is, as expected, always <1 (mean=0.73+/-0.11), whereas the colorimetric method gives a mean extraction ratio of 0.87+/-0.13 implying some unphysiological values (>1). In conclusion, HPLC not only enables the simultaneous quantitation of PAH and NAc-PAH, but may also provide more accurate and precise PAH clearance measurements.

Rauchentwohnung-- die zentrale Rolle der Arztinnen und Arzte [Smoking cessation--a central role for physicians]

Physicians are in a unique position to advice smokers to quit by the ability to integrate the various aspects of nicotine dependence. This review provides an overview of intervention with smokers presenting in a primary care setting. Strategies used for smoking cessation counseling differed according to patient's readiness to quit. For smokers who do not intend to quit smoking, physicians should inform and sensitize patients about tobacco use and cessation, especially by personalizing benefits to quit and challenging smokers 'beliefs. For smokers who are dissonant, physicians should use motivational strategies, such as discussing barriers to cessation and their solutions. For smokers ready to quit, the physician should show strong support, help set a quit date, prescribe pharmaceutical therapies for nicotine dependence, such as replacement therapy and/or bupropion, with instructions for use, and suggest behavioral strategies to prevent relapse.

Solid and liquid biofuels markets in Finland - a study on international biofuels trade

This study considered the current situation of solid and liquid biofuels markets and international biofuels trade in Finland and identified the challenges ofthe emerging international biofuels markets for Finland. The fact that industryconsumes more than half of the total primary energy, widely applied combined heat and power production (CHP) and a high share of biofuels in the total energy consumption are specific to the Finnish energy system. One third of the electricity is generated in CHP plants. As much as 27% of the total energy consumption ismet by using wood and peat, which makes Finland the leading country in the use of biofuels. Finland has made a commitment to maintain greenhouse gas emissions at the 1990 level at the highest during the period 2008-2012. The Finnish energypolicy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In this study, the wooden raw material streams of the forest industry were included the international biofuels trade in addition to biomass streams that are traded for energy production. In 2004, as much as 45% of the raw wood importedinto Finland ended up in energy production. The total international trading of biofuels was evaluated at 72 PJ, of which the majority, 58 PJ, was raw wood. About 22% of wood based energy in Finland originated from imported raw wood. Tall oil and wood pellets composed the largest export streams of biofuels. The annual turnover of international biofuels trade was estimated at about ¤ 90 million fordirect trade and at about ¤ 190 million for indirect trade. The forest industryas the biggest user of wood, and the producer and user of wood fuels has a central position in biomass and biofuels markets in Finland. Lately, the international aspects of Finnish biofuels markets have been emphasised as the import of rawwood and the export of wood pellets have increased. Expanding the use of biofuels in the road transportation sector would increase the international streams ofbiofuels in Finland. In coming years, the international trading of biomass for energy purposes can be expected to continue growing.

Development of filter media treatments for liquid filtration

Woven monofilament, multifilament, and spun yarn filter media have long been the standard media in liquid filtration equipment. While the energy for a solid-liquid separation process is determined by the engineering work, it is the interface between the slurry and the equipment - the filter media - that greatly affects the performance characteristics of the unit operation. Those skilled in the art are well aware that a poorly designed filter medium may endanger the whole operation, whereas well-performing filter media can make the operation smooth and economical. As the mineral and pulp producers seek to produce ever finer and more refined fractions of their products, it is becoming increasingly important to be able to dewater slurries with average particle sizes around 1 ¿m using conventional, high-capacity filtration equipment. Furthermore, the surface properties of the media must not allow sticky and adhesive particles to adhere to the media. The aim of this thesis was to test how the dirt-repellency, electrical resistance and highpressure filtration performance of selected woven filter media can be improved by modifying the fabric or yarn with coating, chemical treatment and calendering. The results achieved by chemical surface treatments clearly show that the woven media surface properties can be modified to achieve lower electrical resistance and improved dirt-repellency. The main challenge with the chemical treatments is the abrasion resistance and, while the experimental results indicate that the treatment is sufficiently permanent to resist standard weathering conditions, they may still prove to be inadequately strong in terms of actual use.From the pressure filtration studies in this work, it seems obvious that the conventional woven multifilament fabrics still perform surprisingly well against the coated media in terms of filtrate clarity and cake build-up. Especially in cases where the feed slurry concentration was low and the pressures moderate, the conventional media seemed to outperform the coated media. In the cases where thefeed slurry concentration was high, the tightly woven media performed well against the monofilament reference fabrics, but seemed to do worse than some of the coated media. This result is somewhat surprising in that the high initial specific resistance of the coated media would suggest that the media will blind more easily than the plain woven media. The results indicate, however, that it is actually the woven media that gradually clogs during the coarse of filtration. In conclusion, it seems obvious that there is a pressure limit above which the woven media looses its capacity to keep the solid particles from penetrating the structure. This finding suggests that for extreme pressures the only foreseeable solution is the coated fabrics supported by a strong enough woven fabric to hold thestructure together. Having said that, the high pressure filtration process seems to follow somewhat different laws than the more conventional processes. Based on the results, it may well be that the role of the cloth is most of all to support the cake, and the main performance-determining factor is a long life time. Measuring the pore size distribution with a commercially available porometer gives a fairly accurate picture of the pore size distribution of a fabric, but failsto give insight into which of the pore sizes is the most important in determining the flow through the fabric. Historically air, and sometimes water, permeability measures have been the standard in evaluating media filtration performance including particle retention. Permeability, however, is a function of a multitudeof variables and does not directly allow the estimation of the effective pore size. In this study a new method for estimating the effective pore size and open pore area in a densely woven multifilament fabric was developed. The method combines a simplified equation of the electrical resistance of fabric with the Hagen-Poiseuille flow equation to estimate the effective pore size of a fabric and the total open area of pores. The results are validated by comparison to the measured values of the largest pore size (Bubble point) and the average pore size. The results show good correlation with measured values. However, the measured and estimated values tend to diverge in high weft density fabrics. This phenomenon is thought to be a result of a more tortuous flow path of denser fabrics, and could most probably be cured by using another value for the tortuosity factor.

Gas-liquid mass transfer in bubbly flow: Estimation of mass transfer, bubble size and reactor performance in various applications

Gas-liquid mass transfer is an important issue in the design and operation of many chemical unit operations. Despite its importance, the evaluation of gas-liquid mass transfer is not straightforward due to the complex nature of the phenomena involved. In this thesis gas-liquid mass transfer was evaluated in three different gas-liquid reactors in a traditional way by measuring the volumetric mass transfer coefficient (kLa). The studied reactors were a bubble column with a T-junction two-phase nozzle for gas dispersion, an industrial scale bubble column reactor for the oxidation of tetrahydroanthrahydroquinone and a concurrent downflow structured bed.The main drawback of this approach is that the obtained correlations give only the average volumetric mass transfer coefficient, which is dependent on average conditions. Moreover, the obtained correlations are valid only for the studied geometry and for the chemical system used in the measurements. In principle, a more fundamental approach is to estimate the interfacial area available for mass transfer from bubble size distributions obtained by solution of population balance equations. This approach has been used in this thesis by developing a population balance model for a bubble column together with phenomenological models for bubble breakage and coalescence. The parameters of the bubble breakage rate and coalescence rate models were estimated by comparing the measured and calculated bubble sizes. The coalescence models always have at least one experimental parameter. This is because the bubble coalescence depends on liquid composition in a way which is difficult to evaluate using known physical properties. The coalescence properties of some model solutions were evaluated by measuring the time that a bubble rests at the free liquid-gas interface before coalescing (the so-calledpersistence time or rest time). The measured persistence times range from 10 msup to 15 s depending on the solution. The coalescence was never found to be instantaneous. The bubble oscillates up and down at the interface at least a coupleof times before coalescence takes place. The measured persistence times were compared to coalescence times obtained by parameter fitting using measured bubble size distributions in a bubble column and a bubble column population balance model. For short persistence times, the persistence and coalescence times are in good agreement. For longer persistence times, however, the persistence times are at least an order of magnitude longer than the corresponding coalescence times from parameter fitting. This discrepancy may be attributed to the uncertainties concerning the estimation of energy dissipation rates, collision rates and mechanisms and contact times of the bubbles.

The role of smoking in changes in the survival curve: an empirical study in 10 European countries.

PURPOSE: We examined the role of smoking in the two dimensions behind the time trends in adult mortality in European countries, that is, rectangularization of the survival curve (mortality compression) and longevity extension (increase in the age-at-death). METHODS: Using data on national sex-specific populations aged 50 years and older from Denmark, Finland, France, West Germany, Italy, the Netherlands, Norway, Sweden, Switzerland, and the United Kingdom, we studied trends in life expectancy, rectangularity, and longevity from 1950 to 2009 for both all-cause and nonsmoking-related mortality and correlated them with trends in lifetime smoking prevalence. RESULTS: For all-cause mortality, rectangularization accelerated around 1980 among men in all the countries studied, and more recently among women in Denmark and the United Kingdom. Trends in lifetime smoking prevalence correlated negatively with both rectangularization and longevity extension, but more negatively with rectangularization. For nonsmoking-related mortality, rectangularization among men did not accelerate around 1980. Among women, the differences between all-cause mortality and nonsmoking-related mortality were small, but larger for rectangularization than for longevity extension. Rectangularization contributed less to the increase in life expectancy than longevity extension, especially for nonsmoking-related mortality among men. CONCLUSIONS: Smoking affects rectangularization more than longevity extension, both among men and women.

Tobacco control policies in hospitals before and after the implementation of a national smoking ban in Catalonia, Spain

Background: Diverse projects and guidelines to assist hospitals towards the attainment of comprehensive smoke-free policies have been developed. In 2006, Spain government passed a new smoking ban that reinforce tobacco control policies and banned completely smoking in hospitals. This study assesses the progression of tobacco control policies in the Catalan Network of Smokefree Hospitals before and after a comprehensive national smoking ban. Methods: We used the Self-Audit Questionnaire of the European Network for Smoke-free Hospitals to score the compliance of 9 policy standards (global score = 102). We used two crosssectional surveys to evaluate tobacco control policies before (2005) and after the implementation of a national smoking ban (2007) in 32 hospitals of Catalonia, Spain. We compared the means of the overall score in 2005 and 2007 according to the type of hospital, the number of beds, the prevalence of tobacco consumption, and the number of years as a smoke-free hospital. Results: The mean of the implementation score of tobacco control policies was 52.4 (95% CI:45.4-59.5) in 2005 and 71.6 (95% CI: 67.0-76.2) in 2007 with an increase of 36.7% (p < 0.01). The hospitals with greater improvement were general hospitals (48% increase; p < 0.01), hospitals with > 300 beds (41.1% increase; p < 0.01), hospitals with employees' tobacco consumption prevalence 35-39% (72.2% increase; p < 0.05) and hospitals that had recently implemented smoke-free policies (74.2% increase; p < 0.01). Conclusion: The national smoking ban appears to increase tobacco control activities in hospitals combined with other non-bylaw initiatives such as the Smoke-free Hospital Network.

Liquid Packaging Board Market in China

Tämän diplomityön tavoitteena on määrittää liiketoimintailmapiiri ja markkinapotentiaali Kiinan nestepakkauskartonkimarkkinoilla. Tutkimus tukee nestepakkauskartonkivalmistajan vientitoimintoja. Pääosin käytännön tiedoista koostuva tutkimus suoritettiin keräämällä sekundaääritietoa ja haastattelemalla alan erikoisasiantuntijoita. Suuri ja kasvava väestö sekä nopeasti kehittyvä talous tukee nestepakkauskartonkimarkkinoiden kasvua Kiinassa. Viimeaikainen globalisaatio haittapuolineen saattaa kuitenkin horjuttaa poliittista ja sosiaalista tasapainoa ja tätä kautta ylellisyys hyödykkeiden kuten kartonkipakattujen tuotteiden kysyntää Kiinassa. Tuontirajoitukset Kiinaan ovat laskemassa valtion tämän hetkisen kansainvälistymispolitiikan seurauksena. Kartonki vahvistaa asemaansa kilpailevien pakkausmateriaalien joukossa. Kiinan kokonaisnestepakkauskartonkimarkkinat kasvavat vuosittain 10,7 % ja ovat vuonna 2001 noin 100 000 tonnia.

Tobacco control policies in hospitals before and after the implementation of a national smoking ban in Catalonia, Spain

Background: Diverse projects and guidelines to assist hospitals towards the attainment of comprehensive smoke-free policies have been developed. In 2006, Spain government passed a new smoking ban that reinforce tobacco control policies and banned completely smoking in hospitals. This study assesses the progression of tobacco control policies in the Catalan Network of Smokefree Hospitals before and after a comprehensive national smoking ban. Methods: We used the Self-Audit Questionnaire of the European Network for Smoke-free Hospitals to score the compliance of 9 policy standards (global score = 102). We used two crosssectional surveys to evaluate tobacco control policies before (2005) and after the implementation of a national smoking ban (2007) in 32 hospitals of Catalonia, Spain. We compared the means of the overall score in 2005 and 2007 according to the type of hospital, the number of beds, the prevalence of tobacco consumption, and the number of years as a smoke-free hospital. Results: The mean of the implementation score of tobacco control policies was 52.4 (95% CI:45.4-59.5) in 2005 and 71.6 (95% CI: 67.0-76.2) in 2007 with an increase of 36.7% (p < 0.01). The hospitals with greater improvement were general hospitals (48% increase; p < 0.01), hospitals with > 300 beds (41.1% increase; p < 0.01), hospitals with employees' tobacco consumption prevalence 35-39% (72.2% increase; p < 0.05) and hospitals that had recently implemented smoke-free policies (74.2% increase; p < 0.01). Conclusion: The national smoking ban appears to increase tobacco control activities in hospitals combined with other non-bylaw initiatives such as the Smoke-free Hospital Network.

Compliance of hospitality premises to the ban on smoking in all enclosed public places in the Seychelles

In Seychelles, comprehensive tobacco control legislation enacted in 2009, and subsequent regulations, ban smoking in all enclosed places (defined as any area under a fixed or transient roof). A survey in October-November 2014 assessed i) the compliance to the Act and these regulations in 63 restaurants, bars or discotheques and ii) knowledge of the Tobacco control Act and these regulations of supervisors and managers of these hospitality premises; (47 agreed to answer). No person was found smoking in 92% of all premises. However, "no smoking" signs did not conform to regulations in >70% of premises, and ashtrays were seen in 17% of enclosed premises. All supervisors and managers (100%) knew that smoking is banned in enclosed premises but <15% knew the fines liable to persons, respective owners of enclosed places, when a person smokes in an enclosed premise. Furthermore, 60% of supervisors were not aware that no smoking signs must comply with a specific regulation and 40% were not aware that ashtrays are not permitted in enclosed premises. In conclusion, the positive finding is that few persons smoke in restaurants, bars and discotheques, but the survey also showed that several aspects of regulations for tobacco control in enclosed premises are not well implemented. This calls for further information campaigns targeting both the public and the managers of hospitality premises, but also for strengthening enforcement measures, including fines for offenses. Scaling up comprehensive tobacco control measures, including full enforcement of clean air policy, is of paramount importance to meet the national target of 30% reduction of the smoking prevalence between 2010 and 2025.

Liquid-crystalline ordering of antimicrobial peptide-DNA complexes controls TLR9 activation.

Double-stranded DNA (dsDNA) can trigger the production of type I interferon (IFN) in plasmacytoid dendritic cells (pDCs) by binding to endosomal Toll-like receptor-9 (TLR9; refs , , , , ). It is also known that the formation of DNA-antimicrobial peptide complexes can lead to autoimmune diseases via amplification of pDC activation. Here, by combining X-ray scattering, computer simulations, microscopy and measurements of pDC IFN production, we demonstrate that a broad range of antimicrobial peptides and other cationic molecules cause similar effects, and elucidate the criteria for amplification. TLR9 activation depends on both the inter-DNA spacing and the multiplicity of parallel DNA ligands in the self-assembled liquid-crystalline complex. Complexes with a grill-like arrangement of DNA at the optimum spacing can interlock with multiple TLR9 like a zipper, leading to multivalent electrostatic interactions that drastically amplify binding and thereby the immune response. Our results suggest that TLR9 activation and thus TLR9-mediated immune responses can be modulated deterministically.

Residues of b-lactams and quinolones in tissues and milk samples. Confirmatory analysis by liquid chromatography-mass spectrometry

The aim of this work is to optimize and validate methods for the multiresidue determination of series of families of antibiotics as quinolones, penicillins and cephalosporins included in European regulation in food samples using LC-MS/MS. Different extraction techniques and clean-up applied to antibiotics in meat were compared. The quality parameters were established according with EU guideline. The developed method was applied to 49 positive raw milk samples from animal medicated with different antibiotics; the 63% of the analyzed samples were found to be compliant. ___________________________________________________________________________________________

Metabolomic assays of amoxicillin, cephapirin and ceftiofur in chicken muscle. Application to treated chicken samples by liquid chromatography quadrupole time-of-flight mass spectrometry

The aim of this study was to identity metabolites and transformation products (TPs) in chicken muscle from amoxicillin (AMX), cephapirin (PIR) and ceftiofur (TIO), which are antibiotics of the β-lactam family. Liquid chromatography coupled to quadrupole time-of-flight (QqTOF) mass spectrometry was utilized due to its high resolution, high mass accuracy and MS/MS capacity for elemental composition determination and structural elucidation. Amoxicilloic acid (AMA) and amoxicillin diketopiperazine (DKP) were found as transformation products from AMX. Desacetylcephapirin (DAC) was detected as a metabolite of PIR. Desfuroylceftiofur (DFC) and its conjugated compound with cysteine (DFC-S-Cys) were detected as a result of TIO in contact with chicken muscle tissue. The metabolites and transformation products were also monitored during the in vivo AMX treatment and slaughtering period. It was found that two days were enough to eliminate AMX and associated metabolites/transformation products after the end of administration.

Heavier smoking may lead to a relative increase in waist circumference: evidence for a causal relationship from a Mendelian randomisation meta-analysis. The CARTA consortium.

OBJECTIVES: To investigate, using a Mendelian randomisation approach, whether heavier smoking is associated with a range of regional adiposity phenotypes, in particular those related to abdominal adiposity. DESIGN: Mendelian randomisation meta-analyses using a genetic variant (rs16969968/rs1051730 in the CHRNA5-CHRNA3-CHRNB4 gene region) as a proxy for smoking heaviness, of the associations of smoking heaviness with a range of adiposity phenotypes. PARTICIPANTS: 148 731 current, former and never-smokers of European ancestry aged ≥16 years from 29 studies in the consortium for Causal Analysis Research in Tobacco and Alcohol (CARTA). PRIMARY OUTCOME MEASURES: Waist and hip circumferences, and waist-hip ratio. RESULTS: The data included up to 66 809 never-smokers, 43 009 former smokers and 38 913 current daily cigarette smokers. Among current smokers, for each extra minor allele, the geometric mean was lower for waist circumference by -0.40% (95% CI -0.57% to -0.22%), with effects on hip circumference, waist-hip ratio and body mass index (BMI) being -0.31% (95% CI -0.42% to -0.19), -0.08% (-0.19% to 0.03%) and -0.74% (-0.96% to -0.51%), respectively. In contrast, among never-smokers, these effects were higher by 0.23% (0.09% to 0.36%), 0.17% (0.08% to 0.26%), 0.07% (-0.01% to 0.15%) and 0.35% (0.18% to 0.52%), respectively. When adjusting the three central adiposity measures for BMI, the effects among current smokers changed direction and were higher by 0.14% (0.05% to 0.22%) for waist circumference, 0.02% (-0.05% to 0.08%) for hip circumference and 0.10% (0.02% to 0.19%) for waist-hip ratio, for each extra minor allele. CONCLUSIONS: For a given BMI, a gene variant associated with increased cigarette consumption was associated with increased waist circumference. Smoking in an effort to control weight may lead to accumulation of central adiposity.